Electric motors

N20 gear motor - mini DC motor with metal gearbox, 3-12 V

RF-300CA-11440 micro motor - 1.5-9 V DC, shaft Ø 2 mm

MG90S micro servo - metal gears, 2 kg·cm, 4.8-6 V

Funduino MG995 Servo - 360° continuous rotation, 4.8-7.2 V, 15 kg·cm

Geared motor 3-6 V - 1:200 gear ratio, dual shaft

N20 Geared Motor - M3 Threaded Rod 55 mm, 3-12 V, 15-1000 RPM

TT gear motor - single-shaft L motor, 3-6 V, various versions

EMAX XA2212 brushless motor - 11.1 V, 12 A, 820 and 980 KV

Linear actuator - push rod 6 V and 12 V

Micro linear actuator - 6 V, 128 N, 7 mm/s, 10-100 mm stroke

60GA775F gear motor - high torque, 12 V and 24 V, 100-350 rpm

Micro linear actuator - Ø 8 mm lift rod, 3-6 V, various stroke lengths

12 V Linear Actuator - 150 mm Stroke, IP54, 20-120 N

Servo motor 12-24 V - high torque, angle or rotation, 120-380 kg

TT gear motor 1:48 - metal shaft, 3-6 V DC, I- and L-shaped

EDF impeller turbine - brushless motor, Ø 27-70 mm, 3900-11000 kV

Micro linear actuator - 8 mm diameter lift rod, 3-6 V

EMAX ES08MA II micro servo - metal gears, 4.8-6 V, 2 directions of rotation

TT Gear Motor with Hall Encoder - Dual Shaft, 300 rpm, 6 V and 12 V

N20 worm gear motor - 12 V, 136 rpm, dual shaft

Funduino Micro digital servo - 180°, 2 g, JST 1.0 mm

Wheel for 360° servo - rim with rubber tread, Ø 60 mm

TT Gear Motor - 3-6 V, 1:90, metal gears, single shaft

TT gear motor - 1:90 metal gears, 3-6 V, single shaft

ZK-SMC01 stepper motor controller - 2 channels, 1 A each, 5 V

NEMA17 stepper motor - 0.4 Nm, 12 V, with lead wire

TT gear motor 3-6 V - 1:90, metal gears, dual shaft, 200 rpm

Grove Vibration Motor - Coin Motor 24 x 20 mm, solder-free

TT gear motor with encoder and wheel - 3-6 V, dual shaft

TT Gear Motor with Encoder and Wheel - 3-6 V, Single Shaft

Grove servo motor - angular positioning, 0.12 s/60°

Funduino standard servo 38 g - 180°, 4,8-6 V, 3,7 kg/cm

Gimbal camera mount - 2 axes for 2x MG90 servo, up to 500 g

Gear Motor 3-9 V - 3 Nm torque, 60 rpm

NEMA23 Stepper Motor - 1,8 Nm, 3 A, 76 mm Length

Gear motor 3-6 V - 1:200 gear ratio, single shaft

HC-020K encoder - optical speed sensor, 2 pieces, 5 V

ES08MAII servo motor - 1.8 kg·cm, 3.3-6 V, 9 g

NEMA17 stepper motor 17HS19-2004S1 - 0.48 Nm, 1.68 A, bipolar