Funduino standard servo 38 g - 180°, 4,8-6 V, 3,7 kg/cm
This goes with it
Pay in 30 days
Pay in 30 days
Description
Product Overview
- Analog servo with a standard form factor for positioning tasks in model building and prototype development
- Rotation range from 0 to 180 degrees, positioning time of approximately 0.19 seconds at full load
- Operating voltage: 4.8 to 6 volts
- PWM control signal (pulse-width modulation) via a standard servo connector
- Maximum load of approximately 3.7 kilograms with a 1-centimeter lever arm
- Plastic housing with plastic gears, dimensions of approximately 40*20*37 millimeters
Product Description
This analog servo responds to PWM signals and positions its output shaft according to the pulse pattern. Its rotation range of 0 to 180 degrees covers most standard applications.
The positioning time of approximately 0.19 seconds indicates the response speed at full load. The servo requires an operating voltage of 4.8 to 6 volts and can be connected directly to the PWM outputs of common microcontroller boards. It works with the standard logic levels of these boards without additional driver electronics.
Typical applications include steering mechanisms in moving models, flaps and rudder controls in aircraft models, gripper arms in robotics prototypes, and simple rotational movements for visualizing sensor values. The maximum transferable load is approximately 3.7 kilograms with a simple lever arm, allowing you to quickly determine the system's limits.
The servo is supplied with a standard servo connector; depending on the overall setup, a separate power source in the 4.8 to 6 volt range must be available. Simultaneous movement of multiple servos requires a powerful power supply, as each active servo draws peak currents.
Safety Information
The servo is intended exclusively for building prototypes and for testing and development purposes and is not suitable for continuous operation in an uncontrolled environment. When operating more than one servo or using automated movement sequences, ensure an adequate power supply to prevent voltage drops. Before using the servo in applications with potential hazards, observe the applicable safety requirements.
Scope of Delivery
- 1x Funduino Standard 38G Servo, form factor similar to SG5010