Illuminated push button - red LED, 3-24 V, vandal-resistant
This goes with it
Pay in 30 days
Pay in 30 days
Description
Product overview
- Push button with red LED illumination
- Operating voltages of 3 V and 24 V
- Vandal-resistant design
- Contact opens or closes when pressed
- Space-saving for enclosures and control panels
Product description
This illuminated push button combines switching functionality and visual feedback in a single component. The red LED lights up whenever power is supplied, regardless of the switching state, indicating immediate operational readiness. Two operating voltages, 3 V for battery-powered applications and 24 V for industrial equipment, enable use in different circuits without additional voltage sources.
The vandal-resistant construction withstands tampering and wear, making these switches suitable for publicly accessible installations. The switching mechanism operates reliably over many actuation cycles. Depending on the version, normally closed (normally open) or normally open (normally closed) contacts can be configured.
Applications include control tasks on machines and systems where illuminated operation should provide clear signals. In control panels for publicly accessible devices, such as elevators or emergency call terminals, the robust design prevents damage. Alarm and signaling systems use the LED feedback for status indication. The switch is also suitable for control cabinet doors where an active actuation option with visual confirmation is required.
Operation requires a suitable power supply (3 V or 24 V). The choice of contact type (normally closed or normally open) must correspond to the intended switching logic. Installation is carried out from the front through a drilled hole; fastening is enabled by a locknut on the rear.
Safety information
Warning: Risk of crushing when actuated. Do not connect to the household power supply; use is limited to prototypes, test setups, and control circuits for machines up to 24 V. Work on or near electrical installations may only be carried out by a qualified electrician; if you have questions about connecting to control systems, seek advice before commissioning.
Scope of delivery
1x red LED-illuminated push button, 3V - 24V, vandal-resistant