Mini kit - breadboard, LED, push button, resistor, wires

Product Overview

• Complete starter kit with push button, LED, current-limiting resistor, and breadboards
• Breadboard-compatible components for initial digital and analog circuits
• Highly flexible connecting wires in various lengths
• Ideal for beginners with no prior electronics experience
• All components ready for immediate use; no calibration required
• Wires with crimped pin headers on both ends for secure connections

Product Description

This starter kit provides the essential components for taking your first steps with digital circuits on breadboards. The LED lights up when the push button is pressed; the current-limiting resistor limits the current and protects the LED from overload. The flexibility is not limited to the circuit itself: the included connecting wires enable a wide variety of setups without the need for soldering.

The kit works immediately after unpacking with common microcontroller boards and breadboards. The push-button inputs can be connected directly to digital input pins, while the LED requires the described current limitation provided by the resistor. This eliminates concerns about damage caused by excessive current.

The components are suitable for simple status programs in which an LED lights up or blinks depending on whether the button is pressed. Initial circuits without a microcontroller are also possible, using the button to directly control the LED via the power supply. The setup on the breadboard remains easy to reverse.

The kit requires no prior knowledge. If you later need additional functions, such as extra LEDs, more push buttons, or sensors, you can purchase them separately according to the same breadboard standard.

Safety Information

The kit is intended exclusively for building prototypes and for testing and development purposes. It is not suitable for installation in the household power circuit. Work on or near electrical installations is reserved for qualified electricians; if anything is unclear, consult a qualified electrician before commissioning.

Scope of Delivery

• 1x breadboard (400 holes)
• 15x LED, consisting of:
• 5 × red LED
• 5x yellow LED
• 5x green LED
• 40x resistor, consisting of:
• 10 × 220-ohm resistor
• 10 × 1k resistor
• 10 × 10k resistor
• 10 × 100k resistor
• 2 × 5516 photoresistor (light sensor)
• 6 × push buttons (with assorted colored caps)
• 1 × 9V battery connector
• 20x jumper wires (approx. 20cm)