Axial fan 30 x 30 x 10 mm - 12 V DC, JST-XH 2.54 mm

Product overview

• DC fan, 12 V operating voltage, brushless
• Compact design: 30 * 30 * 10 mm
• Connection via 2-pin JST-XH-2.54 connector
• Current consumption: 0.08 A
• Four mounting holes in the plastic frame

Product description

This brushless DC fan connects to a 12 V power source and generates a continuous airflow to cool electronic components. Its electronically driven motor operates without wear and has a long service life because there is no mechanical contact between the brushes and commutator.

Power is supplied via a JST-XH connector with a 2.54 mm pitch. The red wire carries the operating voltage, while the black wire provides the ground connection. With a current consumption of just 0.08 A, the fan requires a suitably rated power supply that can provide power continuously.

Four holes at the corners of the plastic frame allow secure mounting in enclosures, on circuit boards, or on heatsinks. Its low height of 10 mm makes the fan ideal for applications with limited space, such as 3D printers, small electronics enclosures, or power supplies where active cooling is required.

The fan can be used with JST-XH-compatible connection boards or power supplies. An external power source with a capacity of at least 0.08 A is required unless the fan is already integrated into a system with suitable wiring.

Safety notice

This product is not intended for connection to household mains power and is intended exclusively for building prototypes and for testing and development purposes. Connect the red wire to the positive supply voltage and the black wire to ground; reversing the polarity will damage the motor. If you have questions about integrating it into your own systems, consult a qualified electrician.