Funduino UNO R3 Microcontroller - ATmega328P, 16 MHz, for Arduino

Funduino UNO R3 Microcontroller - ATmega328P, 16 MHz, for Arduino

Item no.: F23107480

Funduino UNO R3 Microcontroller - ATmega328P, 16 MHz, for Arduino

13,90 €
incl. VAT, plus shipping
2726 in stock – with you in 1–3 working days.
PayPalKlarnaPrepaymentVISAMastercardApple PayGoogle Pay
Lightning-fast shippingfrom Germany
100,000+satisfied customers
Since 2014from a specialist retailer
30 daysRight of return

This goes with it

incl. VAT, plus shipping

30-day return policy 12+ years of experience Lightning-fast shipping from Germany PayPal Pay in 30 days Klarna Pay in 30 days

Description

Product overview

  • Microcontroller development board with ATmega328P, Arduino-compatible
  • 14 digital pins (6 with PWM output) and 6 analog inputs
  • USB programming and external power supply (7–12 V)
  • 32 KB flash memory, 2 KB SRAM, 1 KB EEPROM
  • 5 V output up to 500 mA and 3.3 V output up to 50 mA
  • Reset button and built-in LED on pin 13

Product description

The board is a microcontroller development board with an ATmega328P that can be programmed using the Arduino IDE and is ready to use in prototypes, learning projects, or hobby applications. At the heart of the system is the chip in a DIP package, which runs at a clock speed of 16 MHz and executes code from its 32 KB flash memory.

The board is programmed via a USB-B cable, which also powers it during development. For standalone operation, an external power source between 7 and 12 V feeds a voltage regulator via the barrel jack, which generates the stable 5 V operating voltage. The board provides up to 500 mA at the 5 V output and up to 50 mA at the 3.3 V output, allowing external sensors and small modules to be powered as well.

The 14 digital pins are used to control actuators, switches, and displays, 6 of which can also provide pulse-width modulation (PWM) to dim LEDs or control small motors, for example. The 6 analog inputs read continuous measurements from sensors such as temperature or light sensors. A built-in LED on pin 13 allows you to perform initial tests without external components.

The memory is divided into three parts: 2 KB of SRAM for volatile working memory during program execution, 1 KB of EEPROM for data that is retained even after power is lost, and 32 KB of flash memory for program code. The reset button restarts the running program. To get started, you need a computer with the Arduino IDE and a USB-B cable to connect to the board. An external power supply is required if you want to operate the board independently of a computer.

Safety notice

The development board is not intended for installation in household electrical circuits and is exclusively designed for building prototypes and for testing and development purposes. Work on or near electrical installations must be carried out by qualified electricians. When using an external power source, ensure the input voltage is within the permitted range of 7 to 12 V.

Scope of delivery

  • 1x Funduino UNO R3 microcontroller
  • 1x 30 cm USB cable

Technical data

Advanced 18 specifications
Product type
Microcontroller board
Manufacturer
Funduino
Microcontroller
ATmega328P
Clock speed (MHz)
16
Flash memory
32 KB
SRAM
2 KB
EEPROM
1 KB
Min. supply voltage (V)
7
Max. supply voltage (V)
12
Connection
Female header
USB
USB-B
Digital I/O pins
14
Number of ADC channels
6
Number of PWM channels
6
Length (mm)
68,6
Width (mm)
53,4
Pitch (mm)
2,54
Colour
Blue
Recommendations

Similar products

Loading product recommendations

incl. VAT, plus shipping