ESP32 development board - 2 MP camera, CH340 adapter, Wi-Fi
This goes with it
incl. VAT, plus shipping
Pay in 30 days
Pay in 30 days
Description
Product overview
- Single-board computer with integrated 2 MP camera and CH340 USB-to-UART converter
- Dual-core processor with a clock speed of 240 MHz
- 4 MB flash memory and 520 KB RAM
- WiFi and Bluetooth Low Energy for wireless communication
- 36 digital inputs/outputs, I2C, SPI, and UART interfaces
- Operating voltage of 3.3 V, USB power supply possible
- Antenna and camera connector already integrated on the board
Product description
The development computer based on a 32-bit processor combines sensor, communication, and image-processing capabilities in a compact unit. With an integrated camera and wireless interfaces, the board is suitable for quickly building prototypes that need to capture and process camera images. The USB-to-UART converter enables programming and communication via a standard USB interface on the computer.
Four megabytes of flash memory and approximately 500 kilobytes of RAM are available for processing camera images and storing data. The dual-core architecture, with a clock speed of 240 MHz per core, enables true parallel processing, which is particularly advantageous when capturing sensor data and processing images simultaneously. WiFi and Bluetooth Low Energy enable wireless data transmission without additional modules.
Typical applications include video doorbells, indoor motion detection with camera verification, wireless environmental monitoring with snapshots, and visual robot navigation over short distances. The board can also be used as an IoT sensor with image telemetry, for example to document machines or inventory levels remotely.
The operating voltage of 3.3 volts is supplied via USB or from an external power source. Sensors and modules with 5 V logic require a level shifter for safe connection. Standard development software and a USB cable are required for programming. The 2-megapixel camera resolution is suitable for image analysis and motion detection, but not for high-resolution photography.
Safety information
The board is intended exclusively for building prototypes and for testing and development purposes, not for operation in a household electrical circuit. The USB port and power supply must be protected against short circuits. When working on the power supply or if you have questions about integrating the board into existing installations, consult a qualified electrician.
Scope of delivery
- 1x ESP32 development board with 2.0 MP camera and CH340 adapter board