Build Plate Coating Blue Tape - 48 mm x 8 m, Self-Adhesive

Product overview

• Self-adhesive coating for 3D printer beds, 48 mm wide
• 8 meters long per roll
• Blue-colored for optimal visual inspection
• Adheres to flat surfaces such as glass plates and aluminum profiles
• Prints can be easily removed after cooling

Product description

This self-adhesive coating helps plastic prints adhere to the print bed of FDM 3D printers. The blue film is applied to the flat print surface and provides optimal adhesion during printing.

The matte surface provides good grip for the molten plastic material in the first print layer. After cooling, prints come off on their own, so scraping or heating is not necessary. The roll, which is eight meters long and 48 millimeters wide, is enough to re-cover the same print bed multiple times or to use on several devices.

The coating adheres to glass plates, aluminum profiles, and other smooth surfaces. It is applied directly to the device's print bed and replaced when worn. The surface should be dry and free of grease before application.

Safety notice

This coating is intended exclusively for assembling and commissioning 3D printers, as well as for testing and development purposes. Replacing it during printing or while the print bed is hot poses a burn risk. Wait until the device has cooled before working on it.