Precision trimmer, 500 kOhm - 25 turns, cermet, 0.5 W
This goes with it
incl. VAT, plus shipping
Description
Product overview
- Multi-turn trimmer potentiometer with a resistance value of 500 kOhm
- Cermet resistive track for stable, long-lasting adjustment
- 25 turns from stop to stop for fine adjustment
- Adjustment from above using a screwdriver on the slotted metal shaft
- 3 solder terminals for through-hole mounting
- Power rating: 0.5 W at 70 °C
- Operating temperature range: -55 °C to +125 °C
- Anti-overrotation design at mechanical end stop
Product description
This 500 kOhm multi-turn trimmer potentiometer is used to calibrate, trim, and finely adjust resistance values in circuits. Its cermet resistive track, made from ceramic and metallic materials, provides stable settings over time without wear. The 25 turns between the mechanical end stops allow for precise adjustment. This makes it possible to accurately trim resistance in signal processing or measurement chains, where coarse adjustments would cause inaccuracies.
Adjustment is made from above using a screwdriver on the slotted metal shaft. The potentiometer has three solder terminals for through-hole mounting on circuit boards: two for the ends of the resistive track and one for the adjustable wiper. This lets you use the component as either a fixed voltage divider or an adjustable resistor. The design prevents uncontrolled rotation: after reaching the mechanical stop, the shaft continues to turn without damaging the component or changing its internal setting.
The sealed housing allows reliable operation even in damp or dusty conditions. The operating temperature range of -55 °C to +125 °C covers both industrial and harsher environments. The maximum rating of 0.5 W limits the current draw, so this trimmer potentiometer is designed for control circuits with low to medium currents. Typical applications include fine-tuning signal levels in measurement circuits, calibrating gain and volume settings in audio equipment, and making targeted adjustments to circuit parameters during development and in the field.
Safety notice
Work on or near the electrical installation must be carried out by a qualified electrician. If you have any questions about commissioning, consult one in advance. This component is intended exclusively for building prototypes and for testing and development purposes. It is not intended for installation in household electrical circuits.
Scope of delivery
- 1* 500K Ohm Precision Trimmer / Rotary Potentiometer with Long Metal Shaft