JST-PH 2.0 plug-in cable - 4-pin, 20 cm, 0.5 mm²

Product overview

• Jumper cable with 4-pin JST-PH-2.0 connectors, 20 cm long
• Connects batteries, sensors, and actuators with JST-PH sockets
• 0.5 mm² wire cross-section for currents up to 2 A
• Individually insulated, color-coded wires
• Fitted with crimp contacts, no soldering required

Product description

This cable connects assemblies and energy storage devices via JST-PH connectors. The 20 cm connector is suitable for compact setups where components with JST-PH sockets, such as small lithium batteries or sensors, are connected to prototype boards.

The four wires are individually color-coded and terminate in crimp contacts that slide into the connector socket. This saves soldering work and reduces thermal stress on sensitive components. The 0.5 mm² cross-section carries currents of up to about 2 A, which is sufficient for many sensors and small motors, but not for high-power loads such as high-power LEDs or larger servos.

This cable is used in battery-powered projects, sensor-chain setups, and modular test setups. Solder-free installation allows for quick configuration changes.

A JST-PH socket is required as the mating connector, for example on a battery protection module or sensor board. A thicker wire cross-section is required for higher currents or longer connections.

Safety notice

This cable is intended exclusively for building prototypes and for testing and development purposes. Live contacts must be protected against short circuits, especially in battery applications. If you are unsure about the correct application or current flow, consult a qualified electrician before use.

Package contents

• 1* JST PH2.0mm cable - 4 P - 20cm