Solar cell 3 W - 9 V, 0.35 A, 12.5 x 19.5 cm
This goes with it
incl. VAT, plus shipping
Pay in 30 days
Pay in 30 days
Description
Product overview
- Solar panel with epoxy resin coating
- Rated power 3 W, 9 V operating voltage, up to 0.35 A
- Two soldered cables, approx. 15 cm long
- Dimensions 12.5*19.5 cm, approx. 88 g
- Connection via DC connector or screw terminals
Product description
The solar panel consists of several solar cells connected in series that generate an electrical voltage when exposed to light. The epoxy resin coating protects the cells and contact points from moisture and mechanical damage.
During operation, the panel delivers 3 W at an operating voltage of 9 V and generates an output current of up to 0.35 A, depending on the lighting conditions. Without a load, the voltage rises to approximately 10.5 V. The output current decreases accordingly in poorer lighting conditions.
Two cables approximately 15 cm long are already soldered on; one is marked positive, while the other forms the negative pole. A suitable DC connector set or screw terminals enable connection to microcontroller boards or charging circuits.
The panel is suitable for charging small batteries, providing autonomous power to electronics projects, and learning the basics of photovoltaics. With dimensions of 12.5*19.5 cm and a weight of around 88 g, the panel can also be used in portable applications. Depending on the requirements of the connected load, a charge controller or voltage regulator may be required in addition to the panel itself.
Safety information
If the epoxy resin coating is damaged, moisture may penetrate and cause short circuits. The panel is intended exclusively for building prototypes and for testing and development purposes, and is not suitable for installation in household electrical systems.
Scope of delivery
- 1x Solar Cell Solar Panel 3W 9V - Arduino-compatible 12.5cm x 19.5cm