Sensor Shield for Raspberry Pi Pico - GPIO Breakout, Solder-Free

Product overview

• Expansion module for Raspberry Pi Pico with GPIO breakout board
• Simplified access to the Pico's inputs and outputs without soldering
• Connection ports for external sensors and actuators with standardized connectors
• Illuminates the pinout on the board for quick orientation

Product description

The Shield increases the number of available inputs and outputs of the Raspberry Pi Pico with connection ports for sensors and actuators. The Pico's GPIO pins are distributed across separate connectors, allowing multiple modules to be connected simultaneously without soldering.

The connectors eliminate the need for direct wiring to the Pico. The Shield uses the Pico's existing GPIO ports and routes them to standardized terminal blocks. This allows the microcontroller to be equipped with various sensor types in just a few minutes and reconfigured later.

The module is suitable for quickly building prototypes with multiple parallel sensors, for example to measure temperature, humidity, and air pressure simultaneously, or to combine multiple motors and switches in one project. The printed pinout also enables beginners to make error-free connections on their first attempt.

In addition to the Pico, a power supply or power source with the voltage required by the connected components is needed for operation. The Shield's operating voltage itself depends on the connected Pico, typically 5 V or 3.3 V. A Pico and the associated sensors or actuators must be obtained before assembly.

Safety information

The module is intended exclusively for building prototypes and for testing and development purposes; it is not intended for installation in household electrical circuits. Ensure correct polarity when connecting external power sources. Before commissioning, consult a qualified electrician when working on or near electrical installations.

Scope of delivery

• 1x Sensorshield GPIO for Raspberry Pi Pico