ReadyToSky 1306 brushless motor - 3100 KV, CW, M2 thread
This goes with it
Pay in 30 days
Pay in 30 days
Description
Product overview
- Brushless motor with 3100 KV for multicopters and drones
- Rated speed at 1 V input voltage: 3100 rpm
- Operating rotation direction: clockwise (CW)
- Current consumption of up to approximately 30 A at full load
- M2 threaded mounting for motor mounts on multicopter frames
- Connection via a 3-pin plug for ESCs with a matching output
Product description
The brushless motor is designed for propulsion applications on multicopters and racing drones. The 3100 KV rating means that the motor speed increases by 3100 revolutions per minute for each volt of input voltage. For example, with a 3 S lithium-polymer battery with a nominal voltage of 11.1 V, the motor would accelerate to around 34,000 rpm at no load. This drives the propeller through the airflow and generates thrust.
The motor requires an electronic speed controller (ESC), which converts the battery's DC voltage into three-phase AC for the windings and thereby controls the speed. The motor will not run without this controller. A 3 S battery with a discharge rating of at least 25 to 30 A is suitable for the motor's current limits. The rotation direction is factory-set to clockwise, but can be reversed by swapping two of the motor connection wires at the ESC.
The motor is suitable for lightweight to medium-weight multicopters with four, six or eight propellers, as well as for racing drones with a frame size of approximately 250 mm or larger. It can also be used in electric-powered model aircraft and similar aircraft.
Operation requires a compatible ESC module, a lithium-polymer battery (2 S or higher), a battery charger and a propeller with a suitable mounting hole. The maximum current consumption of approximately 30 A places a considerable load on the battery. Overloading can damage the motor and the ESC.
Safety information
The motor becomes very hot during operation. Propellers rotate at high speed and can cause injuries. Never place your hand near a running motor. High-voltage batteries (lithium-polymer) require careful handling and must not be short-circuited, overcharged or damaged. The device is intended exclusively for building prototypes and for testing and development purposes, and is not intended for flight operations in inhabited areas. If you are unsure about the power supply or the safe integration into an aircraft, consult a qualified electrician before first use.