PH2.0 connector socket - 2-pin, right-angle contacts

Product overview

• Angled 2-pin socket connector with 2.0 mm pitch
• Phosphor bronze contacts for a secure electrical connection
• Threaded mounting holes for stable installation on circuit boards
• Can be cut to size, allowing the number of pins to be adjusted as needed

Product description

This 2-pin socket connector with a 2.0 mm pitch accepts mating connectors for cable and module connections. The contacts are angled at 90 degrees, allowing them to plug in parallel to the circuit board. Depending on the installation orientation, this saves space or simplifies wiring on densely populated boards.

The phosphor bronze contacts ensure reliable current flow through repeated insertions. The socket is secured to the circuit board using two threaded mounting holes, preventing it from shifting even with frequent handling.

Applications include modular and plug-in systems in electronics education projects, prototyping with sensor or actuator wiring harnesses, and test setups with frequently changing wiring. In battery power systems, the socket often serves as a reliable interface between a portable battery pack and the circuit.

Basic screw-driving and soldering skills are required to install the socket and solder on wires. The socket can be cut to size, allowing individual pin positions to be removed or disabled as needed without damaging the rest of the socket.

Safety notice

This product is intended exclusively for building prototypes and for testing and development purposes. It is not suitable for installation in household electrical circuits. When working with a soldering iron, take precautions against heat and solder fumes. If you have questions about sizing the connected power supply or the safety of the setup, consult a qualified electrician before use.

Package contents

• 1x PH2.0 - 2P 90° connector