C017CLS micro servo - 1.7 kg-cm, 0-180°, 4.8-6 V
This goes with it
Pay in 30 days
Pay in 30 days
Description
Product overview
- Micro servo with control signal connection
- Operating voltage 4.8 to 6 V
- Plug-in module for standard RC servo connectors
- Micro design weighing 7 g
- Torque up to 1.7 kg-cm
- Rotation range 0 to 180 degrees
Product description
This micro servo is an actuator for remote control via digital control signals. It is powered with a voltage between 4.8 and 6 V and accepts pulse-width modulation. The standard RC plug connection allows it to be connected to common servo drivers and remote control receivers without additional adapters.
The servo rotates its output between 0 and 180 degrees depending on the pulse duration. The 1.7 kg-cm torque is sufficient to actuate ailerons, rudders, or flaps on model aircraft and to switch light mechanical systems. Weighing 7 g, it adds minimal weight to the overall mass and also fits into confined installation spaces.
The servo is used in RC airplanes, helicopters, and boats where actuators need to be controlled precisely. It can also be used for mechanical control in lightweight robotics projects and model-making applications. For longer operating periods, the power supply should be dimensioned separately, especially when several servos move simultaneously or operate under continuous load.
Safety information
The servo is intended exclusively for prototyping, testing, and development purposes and is not suitable for installation in household electrical circuits. When working with or in the immediate vicinity of electrical installations, a qualified electrician must be consulted. Reversed polarity at the connector can cause damage, so check the connecting cable before connection.
Scope of delivery
- 1x Servo C017CLS - 1.7g (including screws)