JST XH connector cable 2.54 mm - 2-pin, male, 20 cm

Product overview

• JST-XH connector cable, 2-pin, 20 cm length
• Male connector to bare wire ends
• Rated current: 3 A per contact
• Operating voltage up to 250 V
• Soldered contacts
• XH design enables daisy-chaining of up to six modules

Product description

This cable with a JST-XH connector connects electronic modules or power sources via a two-pin connection. The male connector is located on one side, while the other side terminates in bare wire ends that can be crimped or soldered for power supply or data exchange with other devices. With a length of 20 cm, the cable can be integrated into compact setups with short cable runs without being too short for larger distances.

The connector has male contacts and plugs into the corresponding socket on a module. The cable is designed for operation at voltages up to 250 V and currents up to 3 A per contact. If the other side is already fitted with a Fritz connector, soldering is not required; if open wiring is present, the wire ends are connected to the target power source or module. The soldered contacts provide a secure connection without oxidation over extended periods.

Applications include building sensor circuits, powering small motors via control boards, and flexibly connecting battery taps to prototype boards. Particularly in battery-powered projects, the pluggable system enables quick switching between different power sources or loads without having to rewire the setup.

The cable requires a suitably rated power supply or a module with a JST-XH socket on the other side. The wire cross-sections must match the intended current; heat generation must be taken into account at higher power levels. Anyone working with higher currents or voltages should check the load capacity of the soldered contacts before commissioning.

Safety information

This cable is intended exclusively for building prototypes and for testing and development purposes, not for integration into household electrical circuits. High-current applications require careful sizing and inspection; if there is any doubt about the load capacity, consult a qualified electrician before commissioning. Check the polarity before connecting to prevent damage to sensitive devices.

Scope of delivery

• 1x JST XH2.54mm - 2P - Male - 20cm connector cable