Funduino development board - soldering kit with LEDs and sensors
Funduino development board - soldering kit with LEDs and sensors
This goes with it
Pay in 30 days
Pay in 30 days
Description
Discover the Funduino development board (soldering practice)
In cooperation with Hackerspace Bremen e.V., we developed the Funduino development board as a soldering kit to give aspiring electronics experts a clear and entertaining introduction to the world of microelectronics.
The soldering kit contains a wide range of LEDs, sensors, and actuators, as well as an external connection for motors. The knowledge acquired provides an excellent foundation for advanced Arduino projects.
The kit is delivered unsoldered. This promotes learners' soldering skills and provides the opportunity to customize the soldering kit according to individual needs. We also provide detailed assembly instructions, of course.
Attention, proud 3D printer owners: As an additional accessory, we have designed a frame for the soldering kit that you can print yourself; it is not included in the package!
Helpful links:
Package contents:
- 1x Arduino NANO-compatible microcontroller (CH340 chip)
- 1x PCB
- 1x 0.96" OLED display
- 1x DHT11 temperature and humidity sensor
- 1x speaker
- 1x WS2812B LED module with 8 pixels (Neopixel)
- 1x TL1838 infrared receiver
- 1x LDR photoresistor (light sensor)
- 1x ADXL335
- 1x potentiometer
- 1x push button
- 1x RGB LED
- 1x red LED
- 1x yellow LED
- 1x green LED
- 5x 220-ohm resistors (alternatively 100-ohm or 150-ohm)
- 1x 820-ohm resistor
- 1x 1.2k-ohm resistor
- 1x 47k-ohm resistor (alternatively 10k-ohm)
- 2x 4.7k-ohm resistors
- 2x 100nF capacitors
- 1x 220uF 25V capacitor
- 2x 1x3 pin headers
- 1x 1x4 pin header
- 1x 90° pin header
- 4x mounting screws
- 2x pin headers (female)