RF300CA electric motor - 3-6 V, 12000 rpm, JST PH2.0

Product Overview

• Small electric motor for solar applications and battery-powered projects
• Operating voltage: 3 to 6 volts
• JST-PH2-0 connector for reliable power supply
• Typical speed of approximately 12000 rpm in the upper voltage range
• Compact, lightweight design

Product Description

This small electric motor operates in the 3 to 6-volt range and is suitable for solar-powered models and battery-powered projects where low power consumption and light weight are important. Under load, the motor reaches speeds of up to approximately 12000 revolutions per minute, allowing it to be used with directly driven elements without requiring a gearbox.

The motor tolerates voltages between 3 and 6 volts without additional regulation, although its speed and current consumption increase within this range. The JST-PH2-0 connector system provides reliable contacts and simplifies installation and removal.

Typical applications include solar robots in laboratories or school projects, small fan propellers for compensating localized heat loads, stirring devices in chemical experiments, or slowly moving transport models in dioramas. In all cases, the motor operates without external speed control, but can be controlled with a PWM controller if required.

The power supply from a solar module or battery must be matched to the connector pinout. At very low voltages below 3 volts, the torque decreases significantly. A mechanical load of more than a few grams requires either a stronger power supply or a gearbox, which increases the size of the assembly.

Safety Notice

The motor is intended exclusively for building prototypes and for testing and development purposes. Using power supplies above 6 volts poses a risk of overheating and damage. Contact with rotating parts may cause injuries, so ensure that running motors are not accessible.

Scope of Delivery

• 1x RF300CA 3-6V micromotor / solar motor / electric motor with PH2.0 cable