Battery holder for 4x 18650 - 7.4 V, solder tabs, no connector

Battery holder for 4x 18650 - 7.4 V, solder tabs, no connector

Item no.: F23107212

Battery holder for 4x 18650 - 7.4 V, solder tabs, no connector

1,56 €
incl. VAT, plus shipping
Currently unavailable
PayPalKlarnaPrepaymentVISAMastercardApple PayGoogle Pay
Lightning-fast shippingfrom Germany
100,000+satisfied customers
Since 2014from a specialist retailer
30 daysRight of return

This goes with it

incl. VAT, plus shipping

30-day return policy 12+ years of experience Lightning-fast shipping from Germany PayPal Pay in 30 days Klarna Pay in 30 days

Description

Product overview

  • Battery holder for four 18650 lithium-ion cells
  • Series-parallel configuration, output voltage of 7.4 V when fully charged
  • Contacted via solder lugs at the terminals
  • Supplied without a connector; connection must be made separately
  • Plastic housing with cover
  • Protection circuit against overcharging and deep discharge
  • Dimensions: approximately 73 mm x 71 mm x 27 mm

Product description

This battery holder accommodates four 18650 lithium-ion cells and connects them internally in a series-parallel arrangement. This results in a nominal voltage of 7.4 V when fully charged. The plastic housing protects the cells and provides a stable mounting solution.

The two connection terminals end in solder lugs, so cables or connectors must be soldered directly to them. An integrated protection circuit prevents the cells from being overcharged or deeply discharged, significantly extending their service life. The holder is supplied without pre-installed connectors.

Applications include portable electronic devices such as LED headlamps, cordless power tools, home servers, or mobile power systems with a nominal voltage of 7.4 V. It is equally suitable for model vehicles or radio controls in this voltage class.

Four 18650 cells must be purchased separately; their condition and state of charge affect the actual output voltage. Soldering the terminals requires soldering skills; if you are unsure, consult a professional before assembly. The holder is not suitable for operation at mains voltage.

Safety instructions

Batteries and lithium-ion cells must not be short-circuited and must be protected from mechanical damage. This battery holder is intended exclusively for building prototypes and for testing and development purposes. Work on or near power supply systems should only be carried out by people with the necessary expertise; if you have questions about commissioning, consult a qualified electrician.

Scope of delivery

  • 1* Battery holder - 4x 18650 lithium-ion cells, without connector

Technical data

Advanced 9 specifications
Product type
Battery holder
Manufacturer
Funduino
Supply voltage (V)
3,7
Output type
Bare wire ends
Connection
Cable connection
Contact type
Spring contact
Battery type
18650 lithium-ionեական
Housing material
Plastic
Colour
Black
Recommendations

Similar products

Loading product recommendations

incl. VAT, plus shipping