Adapter board for ANET ET5 Pro - hotend, 9 connectors
Pay in 30 days
Pay in 30 days
Description
Product Overview
- Adapter board for wiring all modules on the hotend of a 3D printer
- Combines connections for fans, thermistor, endstop, motors, and leveling sensor
- Compatible with ANET ET5 Pro and identical ET4/ET5 models
- Connects printhead modules to the mainboard via a ribbon cable
- Nine labeled connectors and solder pads for the individual components
- With a separate connection for the Z-axis leveling sensor (ABL sensor version)
Product Description
This adapter board is mounted on the printhead of an ANET 3D printer and combines all components installed there into a central interface. Instead of routing each module individually to the mainboard, the thermistor, fans, sensors, and motors are connected here first. A single ribbon cable then transfers all signals to the mainboard.
The board has nine labeled connection points assigned to the individual hotend components. The connections for the extruder motor, X-axis motors, heater cartridge, hotend fan, a filament sensor, the various endstops, and the automatic leveling sensor (ABL sensor) are plugged in here. There are also connections marked with plus and minus for a Z-axis sensor and the printhead lighting; depending on the printer configuration, only some of these need to be used.
This version is specifically designed for the ANET ET5 Pro as well as the identical ET4 and ET5 models and is attached to the back of the left X-carriage part. Combining all connections at a central point not only simplifies the printhead assembly but also significantly reduces the wiring inside the printer housing.
Safety Information
Before connecting, make sure that all connectors are correctly connected to their corresponding hotend modules and that the polarity is correct. Work on the printer assembly and wiring should only be carried out when the printer is switched off and disconnected from the power supply. If you are unsure about the correct wiring, consult a qualified electrician before commissioning the printer.
Scope of Delivery
- 1* ANET ET5 Pro - Adapter Board /Connection Board