LCD35-ET5 Display for ET5 Pro - 3.5-Inch TFT, 480 x 320 Pixels, Capacitive Touch

Product Overview

• Replacement LCD display for ET5 Pro
• 3.5-inch TFT color display
• Resolution: 480 * 320 pixels
• Capacitive touchscreen
• Direct connection to the ET5 Pro board
• Factory-calibrated

Product Description

This display replaces the original ET5 Pro display and provides a 3.5-inch color screen with a resolution of 480 * 320 pixels. The integrated capacitive touchscreen enables intuitive operation without separate pressure points. The module connects directly to the ET5 Pro board, so no additional wiring or adapters are required, as the contacts are factory-matched to the interface.

The display is controlled via the ET5 Pro software and is delivered already calibrated. This eliminates the need to readjust the touch sensitivity. The resolution is sufficient for displaying menus, measurement values, and simple graphical outputs as used in automation or monitoring projects.

The display fits into the ET5 Pro housing. Replacement requires only a few steps. No additional power supply is required for operation, as power is supplied via the ET5 Pro board.

Safety Notice

Replacement should only be carried out when the device is switched off and completely disconnected from the power supply. The display is intended exclusively for repair and maintenance of the ET5 Pro. If anything is unclear, consult a qualified electrician before installation.

Scope of Delivery

1x display and two connection cables