40-Pin Breadboard Cable - ribbon cable, 3 m roll
This goes with it
incl. VAT, plus shipping
Pay in 30 days
Pay in 30 days
Description
Product overview
- 40-conductor ribbon cable with connector for breadboard connections
- Enables connections between controller boards and breadboards over greater distances
- Plugs together without soldering and is ready for immediate use
- Color coding of the individual conductors for reliable identification
Product description
A 40-conductor ribbon cable connects controller boards and breadboards without soldering. The connector fits directly onto standard header strips, while the individual conductors can be inserted into the breadboard rows. This eliminates time-consuming wiring with individual wires.
The color coding of each conductor makes it easy to assign signals and avoid incorrect connections. For operation, the cable only needs to be plugged in; no calibration or programming is required. The 40 conductors make it possible to wire multiple circuits in parallel or connect all pins of a common controller board at once.
The cable is typically used when building prototype circuits with breadboards, especially when the hardware components need to be physically separated. It is also practical for measurement applications where various sensors are controlled simultaneously from the board. It is equally useful for test and development projects that require frequent rewiring.
Depending on the version, the cable length must match the distance between the board and breadboard. Interference may occur with very long connections spanning several meters; in such cases, a shorter cable or a shielded cable should be used.
Safety information
The ribbon cable is intended exclusively for building prototypes and for testing and development purposes. It must not be installed in electrical systems. Before commissioning, verify that all connections are properly seated and that the connected components are compatible with the controller board's operating voltage; if in doubt, consult a qualified electrician.
Scope of delivery
- 3-meter, 40-pin breadboard cable, jumper cable