Resistor Assortment 100 Pieces - 5 Values 100 Ω to 10 kΩ, 0.5 W
This goes with it
incl. VAT, plus shipping
Description
Product overview
- Assortment of 100 through-hole fixed resistors with five values from 100 Ω to 10 kΩ, 20 pieces per value
- Carbon film construction with color coding instead of printing
- 0.5 watt power rating per resistor
- Axial leads for plugging into breadboards or soldering onto circuit boards
- Values frequently used in Arduino learning kits
Product description
A resistor limits the current in a circuit and converts excess electrical energy into heat. The set contains five values from 100 Ω to 10 kΩ that are needed particularly often in practice and cover a wide range of typical electronics projects.
Each resistor consists of a carbon film on a ceramic body; the desired resistance value is set by notches and is coded on the component by colored rings. The resistors end in two straight leads and can be plugged directly into a breadboard or soldered onto a circuit board.
Typical applications are current limiting for LEDs, building voltage dividers for measuring voltages and pull-up and pull-down circuits on digital inputs of microcontrollers. A voltage divider with 100 Ω and 10 kΩ, for example, allows 5 V signals to be adapted to 3.3 V logic.
Each resistor can handle a maximum power dissipation of 0.5 watts; if this value is exceeded, there is a risk of overheating and damage. Higher power requires thick film or wirewound resistors. The values included in the set are sufficient for learning and prototype projects; specialized circuits may require additional values.
Safety notice
These resistors are intended exclusively for building prototypes and for test and development purposes. They are not suitable for installation in household electrical circuits. Work on or near the electrical installation is reserved for qualified electricians; if anything is unclear, consult a qualified electrician before putting a circuit into operation.
Scope of delivery
- 1* 20x resistor