JST BEC to XT60 adapter cable - 10 cm, male to female

Product Overview

• Adapter cable for connecting JST-BEC plugs to XT60 sockets
• Length: 10 cm
• Male JST-BEC plug to female XT60 socket
• Enables the use of BEC-equipped power supplies with XT60 connections
• Color-coded red and black wires

Product Description

This adapter cable connects power supplies with a JST-BEC plug to devices with XT60 sockets. The two connector types are not compatible, so the cable serves as an interface and prevents overvoltage or reverse polarity when connecting directly. At ten centimeters long, the cable is compact enough for tight installation spaces while still providing sufficient slack for routing inside devices.

The cable is plugged between a BEC-equipped power source and the consumer's XT60 connection. Connect the red wire to red and the black wire to black; the color coding prevents mix-ups. The contacts are soldered rather than crimped, ensuring reliable contact over many connection cycles.

The adapter cable is typically used in drone, RC model, and battery-powered applications where different chargers and power supplies with various connector types need to be connected. It significantly simplifies equipment setups when individual components do not need to be rewired to connect them.

The cable is designed exclusively for direct current and low voltages up to the rated load limits specified for the connector types. Longer cable runs or significantly higher current flows require thicker wires to prevent voltage drops.

Safety Notice

Incorrectly polarized or damaged connectors can cause short circuits and present a fire hazard. Check the polarity before each connection. This cable is intended exclusively for building prototypes and for testing and development purposes; it is not intended for installation in household electrical circuits. If connectors or wires are damaged, consult a qualified electrician before use.

Scope of Delivery

• 1x 10 cm adapter cable - female JST BEC to male XT60