Adapter cable XT60 plug to T-Plug socket - 12 AWG, 30 A

Product Overview

• Adapter cable with XT60 male plug to T-Plug female socket
• Connects XT60 batteries to T-Plug devices
• Pre-assembled cable requiring no soldering
• For use in RC models, drones, and portable power supplies
• Typical 12 AWG cross-section for moderate current loads

Product Description

This adapter cable bridges the incompatibility between XT60 and T-Plug systems. The XT60 male plug connects to the female T-Plug socket, enabling XT60 batteries to be connected directly to devices with a T-Plug connection.

The cable is pre-assembled and ready for use; no soldering is required. The wire, with its typical 12 AWG cross-section, is suitable for continuous currents of up to approximately 30 A; higher values are also possible for short-term use. Overcurrent must be avoided to prevent cable fires.

The adapter cable is used in drones and RC models when the battery and receiver use different connector systems. It is also useful for testing or temporarily operating T-Plug devices with available XT60 batteries.

For operation, all that is needed is the battery and the target device, provided both have intact connectors. The contacts should be checked regularly for wear and cleaned when necessary.

Safety Notice

This cable is intended exclusively for prototype assembly and testing and development purposes and is not suitable for installation in the household power circuit. Improper use or excessive current can create a fire hazard. Consult a qualified electrician before connecting it to high-capacity or industrial power supplies.