xTool P2S laser mirror set (3 pcs.)
Pay in 30 days
Pay in 30 days
Description
Laser mirror set (3 pieces) for xTool P2S and P2
The laser mirrors redirect the beam from the laser emitter to the laser head. Each mirror in the beam path must transmit the energy with as little loss as possible, because losses add up at every station.
During operation, dust and moisture particles from the air settle on the mirror surface. These particles absorb laser energy and heat up significantly. Burn marks remain on the coating, and reflectivity decreases. This becomes noticeable through weaker cuts, faded engravings, and, in extreme cases, when a job no longer cuts through at all.
Regular cleaning significantly extends the service life. If cleaning no longer brings any improvement, replacement is the only solution. The set contains all three mirrors, allowing you to replace the complete beam path in a single operation. This is also the more sensible approach, because a single new mirror alongside two aged ones offers little benefit.
Highlights
- Complete mirror set with 3 pieces
- Original xTool replacement part, available for P2 and P2S
- Restores cutting performance and engraving quality
- Consistent reflectivity across all three positions
- Metal coating for high reflection in the mid-infrared
- Useful as a maintenance stock for schools, workshops, and production runs
When replacing a mirror makes sense
- Cleaning no longer brings any improvement
- Cuts no longer go through cleanly, even though the material and parameters are unchanged
- Engravings look faded or uneven
- Visible burn marks, scratches, or dull spots on the mirror surface
- Plannable maintenance in schools, makerspaces, and training workshops
- Spare parts stock to keep downtime short
Variant overview
| Feature | For P2 | For P2S |
|---|---|---|
| Compatible with | xTool P2 | xTool P2S |
| Quantity | 3 pieces | 3 pieces |
| Function | Complete beam path mirror set | Complete beam path mirror set |
The following sections are for displaying technical product information only. Select the purchasable product variant above in the product section.
The complete mirror set for the xTool P2
This variant is intended for the xTool P2. It contains all three deflection mirrors in the beam path, allowing you to replace the complete set at once and thus achieve a uniform reflection level across all positions.
Technical specifications
| Feature | Value |
|---|---|
| Variant | For P2 |
| Compatibility | xTool P2 |
| Product type | Laser mirror set (deflection mirrors), optical replacement part |
| Manufacturer | xTool |
| Quantity | 3 pieces |
| Coating | Metal-coated for high reflection in the mid-infrared |
| Laser wavelength | 10.6 µm (CO2) |
| Function | Deflection of the beam from the laser emitter to the laser head |
| Replacement recommended | If cleaning does not restore performance |
Package contents
- 3 x laser mirrors for xTool P2
The complete mirror set for the xTool P2S
This variant is intended for the xTool P2S. It contains all three deflection mirrors in the beam path, allowing you to replace the complete set at once and thus achieve a uniform reflection level across all positions.
Technical specifications
| Feature | Value |
|---|---|
| Variant | For P2S |
| Compatibility | xTool P2S |
| Product type | Laser mirror set (deflection mirrors), optical replacement part |
| Manufacturer | xTool |
| Quantity | 3 pieces |
| Coating | Metal-coated for high reflection in the mid-infrared |
| Laser wavelength | 10.6 µm (CO2) |
| Function | Deflection of the beam from the laser emitter to the laser head |
| Replacement recommended | If cleaning does not restore performance |
Package contents
- 3 x laser mirrors for xTool P2S
Handling and maintenance instructions
- Before carrying out any work on the optics, switch off the device and disconnect it from the power supply.
- Handle mirrors only by the edge and while wearing gloves. Use a clean cloth when setting them down to prevent scratches.
- To clean, first remove loose dust with a blower, then wipe in one direction using optical cleaner and an optical cloth. Always apply the cleaner to the cloth, never directly to the mirror.
- Alcohol-based cleaning agents are flammable. Keep away from heat and open flames and store out of the reach of children.
- Particles can also accumulate during extended periods of inactivity. Regular visual inspection is therefore worthwhile regardless of the duration of use.
- After replacement, check the beam path and perform a test cut on scrap material.
- The set is intended exclusively for the specified model.
Further information
You can also find additional accessories and replacement parts for the xTool P series from us, such as focus lenses, honeycomb panels, and cleaning accessories for optical maintenance.