SPL-3P-3P connector terminal - 3-pin, 250 V / 10 A, gray

Product Overview

• Pluggable terminal block for three wires
• Number of poles 3, pitch 3.5 mm
• Rated voltage 250 V, rated current 10 A
• Plug connector with disconnect contact for secure connections
• Gray, for DIN rail or through-hole mounting

Product Description

This pluggable terminal block safely and detachably connects three conductors. The 3.5 mm pitch enables compact arrangements, even with multiple parallel connection points. Its rating of 250 V and 10 A makes it suitable for control lines and signal circuits where high currents are not required.

The plug connector uses mechanical contacts and a disconnect mechanism that prevents conductors from being disconnected under load. During insertion, the wires are inserted into the corresponding plug connections and locked in place. A release lever enables safe removal without damaging the contacts.

Applications include control cabinets and distribution panels, where multiple control lines need to be connected flexibly and reconfigured later, interface modules in systems that combine various sensor lines, and test setups where groups of wires are frequently changed. The pluggable design eliminates the need for soldering and crimping during assembly.

The correct assignment of wire cross-sections to the plug connections is required; refer to the datasheet for details. The terminal block is not intended for installation in household electrical circuits and must not be used there.

Safety Information

This terminal block may be used exclusively in switchgear assemblies, testing devices, and development setups, not in household electrical installations. All work on or near live conductors must be performed by qualified electricians; if in doubt, consult a qualified electrician before commissioning.

Scope of Delivery

• 1x Terminal block - SPL-3P-3P, PCT-2-3, gray