Warm white LED 3 W - 12 V, 200 lm, JST-XH 3-pin
This goes with it
Pay in 30 days
Pay in 30 days
Description
Product Overview
- Warm-white 3 W LED with JST-XH connector
- Operating voltage: 12 V DC
- Luminous flux: 200 lm, color temperature: 3000 K
- Connection via 3-pin XH-2.54 connector
- Design: rigid circuit board with solder tabs
Product Description
This high-power LED with a warm-white tone (3000 K) is suitable for lighting projects, signaling, and decorative applications. It operates directly with 12 V DC and provides a luminous flux of 200 lumens, sufficient for localized illumination at close range.
The LED is mounted on a rigid circuit board and connected via the 3-pin XH-2.54 connector. The connector enables quick connection and disconnection without soldering. The current consumption is approximately 250 mA, so control is performed using series resistors or PWM controllers. Direct connection to an uncontrolled 12 V source causes overloading and destroys the LED.
Applications include battery-operated lights (such as camping lamps and bicycle lights), LED strips for ambient lighting in enclosures and furniture, and signal lights in models and prototypes. Unlike RGB modules, the warm-white version provides classic light without color mixing.
A regulated 12 V power source, a current-limiting series resistor or PWM dimmer for control, and, for longer cables, wires with a cross-sectional area of at least 0.75 mm² are required. The XH-2.54 connector is compatible with standard motherboards and control modules that use this standard.
Safety Notice
Overvoltage (above 13 V) permanently damages the LED; check the power source before connecting and install current limiting if necessary. Not intended for connection to the household power grid. This LED is intended solely for building prototypes and for testing and development purposes. Consult a qualified electrician when working on or near electrical installations.
Scope of Delivery
- 1x warm-white 3 W LED with JST XH2.54 3P socket