VGA adapter for Raspberry Pi - HDMI to VGA, up to 1920 x 1200

Product overview

• VGA adapter for single-board computers with a 40-pin GPIO header
• Converts an HDMI signal into a VGA output
• Resolution up to 1920 * 1200 pixels
• Power supply via Micro-USB port required
• Compatible with Raspberry Pi models 3B, 2, and B

Product description

This VGA adapter makes older monitors and projectors usable with single-board computers such as the Raspberry Pi. The HDMI signal is converted into an analog VGA signal, enabling operation with devices that only have a VGA input. The resolution supports up to 1920 * 1200 pixels, which is sufficient for standard applications in homes and training environments.

A separate power supply with a Micro-USB connection is required for operation; the device cannot be powered solely by the Raspberry Pi. The connection is made via the board's 40-pin GPIO header, avoiding any load on the HDMI output. The adapter works with Raspberry Pi 3B, 2, and B; compatibility must be checked for older generations or other single-board computers.

Applications range from reactivating older presentation equipment in schools and training rooms to integrating the adapter into kiosk or embedded systems where only VGA interfaces are available. It is also a practical solution for anyone who wants to operate a Raspberry Pi with an inherited monitor.

A VGA cable and a power supply with sufficient current capacity are required. If a 40-pin header is already occupied, conflicts may arise, requiring the GPIO configuration to be redesigned.

Safety information

The adapter is intended exclusively for building prototypes and for testing and development purposes, and is not suitable for integration into household electrical installations. The power supply must be provided via a certified power adapter; if you are unsure about the correct power supply, consult a qualified electrician before commissioning.