Shelly Dimmer 0/1-10 V PM Gen3 - flush-mounted, Wi-Fi, power measurement
Shelly Dimmer 0/1-10 V PM Gen3 - flush-mounted, Wi-Fi, power measurement
This goes with it
Pay in 30 days
Pay in 30 days
Description
Smart dimming controller with power measurement
The Shelly Dimmer 0/1-10V PM Gen3 is suitable for controlling 0/1-10V dimmers and enables precise dimming with power measurement. It is retrofittable and can be used with any conventional switch you have at home.
- Supports 0-10V and 1-10V drivers (lamps, motors, valves, etc.)
- Wi-Fi and Bluetooth controlled
- Shelly Plus Add-on compatible: Supports connection to the sensor interface to measure various data (humidity, temperature, etc.)
- Dimming mode with one or two buttons (use with conventional switches)
- Customizable thresholds and offsets for temperature, humidity, and light when the dimmer is used with the Shelly Plus Add-on
- Power measurement: Accurate monitoring of energy consumption. Information about voltage (V), current (A), and consumption (W) is displayed.
- Protection: Overcurrent/overvoltage/overpower protection
- "Night mode": Automatically sets the lighting brightness to a low level at night.
- Wi-Fi range extender & BLE gateway
- Equipped with a new processor and larger flash memory - ESP Shelly
- No hub required! Easy control via the Shelly Smart Control app, most platforms and protocols, and voice assistants. Use it with Alexa, Home Assistant, or your preferred automation platform.
WHY SHELLY SHELLY DIMMER 0/1-10V PM GEN3?
Use it with your existing wall switches!
Use the switches you already know and seamlessly integrate dimming into your current setup.
Features
Wi-Fi powered
Connect the Shelly Dimmer 0/1-10V PM Gen3 to your Wi-Fi network.
No HUB required!
Bluetooth
Quick setup via Bluetooth or use as a Bluetooth gateway.
Power measurement
Provides accurate power consumption monitoring and free data storage.
Flexible input control
Use it with your existing switches, whether they have one or two buttons.
Smart schedules
Set individual schedules based on your daily routine or follow sunrise and sunset and control your lighting accordingly.
Smart scenes
Combine the Shelly Dimmer 0/1-10V PM Gen3 with other Shelly devices and set up custom scenes.
Features of the Gen3 series
On the way to Matter
Every Gen3 device is designed to be upgradeable to Matter. The doubled memory compared to the Plus series ensures a smooth upgrade process and paves the way for new smart features and integrations.
*Subject to the extent of Matter's feature support.
More memory, more power
The Gen3 series ensures the quality and reliability of our devices by using our powerful Shelly chip. With an impressive 8 MB of memory, the device's performance and efficiency are significantly improved. This substantial increase in memory not only guarantees smoother and faster operation, but also equips the Gen3 series for the introduction of new features.
Unified control with virtual components
The Gen3 series introduces "virtual components" that transform the management and control of third-party devices. Within the Shelly Smart Control app, You can now create virtual devices to integrate non-Shelly products into a unified control system. This feature enables efficient control of all Your smart devices, regardless of brand, through a single interface.
Technical specifications
| FEATURES | |
|---|---|
| Dimensions (H x W x D): | 38.5 x 43.5 x 17mm / 1.52 x 1.71 x 0.67 inches |
| Weight: | 28,5 g |
| Max. screw terminal torque: | 0.4 Nm / 3.5 lbin |
| Conductor cross-section: | 0.2 to 2.5 mm² / 24 to 14 AWG (solid, stranded, and ferrule conductors) |
| Conductor strip length: | 5 to 6 mm / 0.20 to 0.24 inches |
| Mounting: | Wall console / behind the wall / ceiling structure |
| Housing material: | Plastic |
| FUNCTIONS | |
| Ambient temperature: | -20 °C to 40 °C |
| Humidity: | 30% to 70% relative humidity |
| Max. altitude above sea level: | 2000 m |
| CONNECTION | |
| Power supply: | 110-240 V~ 50/60 Hz |
| Device self-consumption: | < 1.5 W |
| External protection: | 16 A, tripping characteristic B or C, 6 kA breaking capacity, energy-limiting class 3 |
| Max. switching voltage: | 240 V~ |
| Max. switching current: | 13 A |
| Max. control current: | 35 mA |
| Voltmeter (AC): | 110 - 240 V |
| Ammeter (AC): | 50 mA - 16 A |
| Measurement accuracy: | ±10 % |
| Power and energy meters: | Active and apparent power / active and apparent energy / power factor |
| Measurement data storage: | No |
| Internal temperature sensor: | Yes |
| CONNECTIVITY | |
| Wi-Fi protocol: | 802.11 b/g/n |
| Frequency band: | 2401-2495 MHz |
| Max. RF power: | < 20 dBm |
| Range: | Up to 30 m outdoors and up to 50 m indoors (depending on local conditions) |
| Bluetooth protocol: | 4.2 |
| Frequency band: | 2400-2483,5 MHz |
| Max. RF power: | < 4 dBm |
| Range: | Up to 30 m outdoors, up to 10 m indoors (depending on local conditions) |
| MCU | |
| CPU: | Shelly ESP32 C3 |
| Clock frequency: | 40 MHz |
| Flash: | 8 MB |
| FIRMWARE CAPABILITIES | |
| Schedules: | 20 |
| WebHooks (URL actions): | 20 with five URLs per hook |
| Scripting: | Yes |
| MQTT: | Yes |
| Advanced schedules: | Yes |
| Key-value database: | Yes |