SBC-CAN01 CAN bus module MCP2515 - SPI, 1 Mbit/s

This CAN bus module allows you to easily add a CAN interface to Arduino, Raspberry Pi, and many other microcontrollers. The module is based on the proven MCP2515 CAN controller and communicates with the connected microcontroller via the SPI interface. It supports the CAN V2.0B standard and enables transmission speeds of up to 1 Mbit/s.

This makes the module ideal for your own projects involving automotive technology, automation, robotics, machine communication, and networked microcontroller systems. Multiple devices can be connected via CANH and CANL to form a robust communication network.

A practical screw terminal for CANH and CANL, as well as additional pins, are available for connecting to the CAN bus. A 120 Ohm terminating resistor is already integrated on the board and can be enabled or disabled as required.

Thanks to the SPI connection, the module can be used with numerous development boards. In addition to Arduino and Raspberry Pi, it can also be used with many other microcontrollers. This makes the CAN module suitable both for initial experiments with the CAN bus and for more extensive electronics projects.

Features
CAN bus module for microcontrollers and single-board computers
CAN controller: MCP2515
CAN specification: CAN V2.0B
Communication with the microcontroller via SPI
Data rate up to 1 Mbit/s
120 Ohm terminating resistor integrated
Terminating resistor can be enabled or disabled
CANH and CANL accessible via screw terminal
Compatible with Arduino, Raspberry Pi, and many other microcontrollers
Ideal for automotive, robotics, and automation projects

Technical data
Property Value
Model SBC-CAN01
CAN controller MCP2515
CAN specification CAN V2.0B
Interfaces SPI, CAN
Maximum data rate 1 Mbit/s
Oscillator 16 MHz
Terminating resistor 120 Ohm
Input voltage 5 V
Current consumption approx. 5 mA
Standby current approx. 1 µA
Operating temperature -40 to +85 °C
Dimensions approx. 44 x 34 x 14 mm
Weight approx. 8 g
Designation SBC-CAN01

Scope of delivery
1x  SBC-CAN01 CAN bus module MCP2515 for Arduino & Raspberry Pi