Wheel for N20 geared motor - rim with rubber tire, Ø 65 mm

Product Overview

• Complete wheel with rim and mounted tire for N20 motors
• Diameter 65 mm, width 26 mm
• 3 mm bore fits directly onto N20 motor shafts
• Plastic rim with rubber tire for traction
• Suitable for small robots, vehicles, and mobile chassis with a total weight of up to approximately 500 g

Product Description

This wheel is a universal drive solution for vehicles based on N20 geared motors. The 65 mm rim with its mounted rubber tire is fitted directly onto the 3 mm motor shaft and requires no additional fastening. With the gear ratios commonly used, the diameter provides practical driving speeds between 0.5 and 2 m/s.

The rubber tire provides sufficient traction to drive four wheels of this type; with four N20 motors, it creates a stable vehicle chassis. The plastic rim is wear-resistant and suitable for typical laboratory environments as well as indoor and outdoor surfaces. Cornering without slipping is easily possible on level floors.

The wheel fits any N20 motor chassis without modification. To build a four-wheel-drive vehicle, four wheels, four motors with the appropriate gearing, and a vehicle frame are required; the wheels themselves already provide the correct geometry for symmetrical arrangement.

Safety Notice

This accessory is not intended for operation with household electrical installations. It is intended exclusively for building prototypes and for testing and development purposes, and is used with N20 DC motors supplied with low voltages.

Scope of Delivery

1x rim / wheel / tire for N20 motors