OLED Display 0.66 inches - 64x48 pixels, I2C, white on black
OLED Display 0.66 inches - 64x48 pixels, I2C, white on black
This goes with it
Pay in 30 days
Pay in 30 days
Description
Product Overview
- OLED display, 0.66-inch diagonal, 64*48 pixels, monochrome white on black
- I2C interface for direct connection to microcontroller boards
- Operating voltage 3.3 V, typical power consumption under 10 mA
- Compact design with four pin headers for easy wiring
- Low power consumption thanks to OLED technology without backlighting
Product Description
This OLED display shows text and graphics on a diagonal of just 0.66 inches, making it suitable for compact electronic projects. The 64*48 pixels are sufficient for simple characters, small symbols, and bar graphs. The monochrome white on a black background provides high contrast and remains easy to read even in indirect light.
The I2C bus enables connection to any standard microcontroller, Arduino boards, Raspberry Pi Pico, or similar single-board computers. Multiple displays can be connected to the same bus and controlled via different addresses without using additional pins. The 3.3 V operating voltage makes the module compatible with modern microcontrollers; a level shifter is required for 5 V boards. The display typically draws under 10 mA, which also makes it suitable for battery-powered applications.
Applications include battery-powered data loggers, small measuring devices with live displays, portable devices with status displays, or control modules in robotics projects. A thermometer with a sensor and display can be built on a breadboard without an external power supply. A gas sensor module with a warning indicator or a simple digital counter with button input can also be implemented.
The target board's usual development environment is used for programming; suitable I2C libraries for controlling the display are available in the Arduino communities. Operation outside the range of 3.0 to 3.6 V shortens the service life.
Safety Information
The display operates at 3.3 V and is intended exclusively for prototyping, testing, and development purposes. Ensure that the power supply is connected with the correct polarity; reverse polarity can destroy the module. If you have questions about powering the overall system, consult a qualified electrician.
Scope of Delivery
- This module is delivered fully soldered.
- 1x OLED - 0.66", 64x48, GVSS, I2C