Funduino Nano R3 bundle - CH340, expansion board, 40 M/M cables
Funduino Nano R3 bundle - CH340, expansion board, 40 M/M cables
This goes with it
Pay in 30 days
Pay in 30 days
Description
Product Overview
- Microcontroller board with ATmega328P and USB-CH340 connection for rapid prototyping
- Dimensions 18 * 45 mm, fits standard breadboards
- 5 V operating voltage via USB or external power supply
- Digital and analog inputs and outputs for sensors and actuators
- Expansion board with 40 jumper wires for building test circuits
- Arduino-compatible, programmable via the IDE or other environments
Product Description
The board is a compact microcontroller module for rapid prototyping on breadboards. It combines the ATmega328P processor with USB communication via the CH340 chip and can be programmed using the Arduino IDE or compatible development environments.
The small format of approximately 18 * 45 mm enables direct plug-in assembly on the breadboard without additional adapters. The 5 V operating voltage is supplied via USB or an external power source. With 14 digital and six analog inputs as well as PWM outputs, sensors can be connected and motors or relays controlled.
The included expansion board and 40 jumper wires significantly speed up circuit assembly during the prototyping phase. Typical projects include automation tasks such as LED control based on light sensor input, temperature monitoring with display output, or controlling stepper motors. The board is equally suitable for beginners in microcontroller programming and for rapid feasibility tests without prior PCB development.
A computer with a USB port is required for programming. External sensors or actuators with different voltage levels (such as 3.3 V sensors) require level shifters. An external power supply is necessary if the USB power limit of approximately 500 mA is exceeded.
Safety Information
The board is intended exclusively for building prototypes and for testing and development purposes and is not suitable for operation in household electrical circuits. A qualified electrician must be consulted for setups involving mains voltage or in its vicinity. Complex applications should be reviewed with a qualified electrician before commissioning.
Scope of Delivery
- 1* Funduino NANO R3 - CH340 Chip - fully soldered, including USB cable
- 1* NANO R3 I/O Expansion Prototyping Board V3.0 expansion board
- 1* 40-piece male/male breadboard cable set (20 cm)