F629Z flanged ball bearing - 9 x 26 x 8 mm, sealed on both sides
F629Z flanged ball bearing - 9 x 26 x 8 mm, sealed on both sides
Pay in 30 days
Pay in 30 days
Description
Product Overview
- Miniature flanged ball bearing for 9 mm shaft diameters
- Outer diameter 26 mm, width 8 mm
- Steel balls in a steel raceway
- Sealing discs on both sides minimize wear and contamination
- Keyway in the flange for positive-locking fastening
Product Description
The flanged ball bearing is designed for drive shafts and rotating axles up to 9 mm in diameter. The circumferential flange enables axial positioning without additional fastening elements and provides support under radial forces.
The sealing discs on both sides protect the ball raceway from contamination and liquid ingress. This significantly reduces maintenance requirements and increases service life in dusty environments or under damp conditions.
The outer diameter of 26 mm and compact width of 8 mm allow installation in confined housing compartments or integrated shaft bearings. The keyway in the flange prevents rotation and enables backlash-free, positive-locking installation.
The bearing is used in small motors, model-building gearboxes, laboratory drives, and precision measuring lathes where compactness and low maintenance are important. Installation requires a shaft of suitable dimensions with a keyway; the bearing is slid onto it and sits in a positive-locking fit.
Safety Information
Bearing shells and balls are steel parts with sharp edges. Wear protective gloves during installation. Worn or damaged bearings must be replaced; continued operation increases wear and the risk of accidents involving rotating parts.
Scope of Delivery
- 1x Miniature flanged ball bearing F629Z - 9*26*8mm