JST GH1.25 connection cable - 4-pin, male, 10 cm
This goes with it
incl. VAT, plus shipping
Pay in 30 days
Pay in 30 days
Description
Product overview
- JST-GH connector cable, 4-pin, 10 cm length
- Male connector, contacts on both sides
- Operating voltage up to 6 V
- Current capacity of 2 A per conductor
- Fine-stranded wire, 0.5 mm², for flexible routing
Product description
This connection cable with a JST-GH connector reliably connects sensors, actuators, and control modules. The 4-pin connector is widely used specifically in robotics and portable devices, where weight and installation space are important.
The cable terminates in a connector on both sides, allowing it to serve directly as an interface between two modules or to be connected to unoccupied pin headers. The current capacity of 2 A per conductor is sufficient for sensor signals and low-power actuators, but not for high-power consumers. The cable is used to connect battery management systems, motor controllers in smaller robots, or sensor chains in portable data loggers.
The operating voltage of up to 6 V limits use to 5 V logic and similar low-voltage systems. Other connector types are required for higher voltages or currents. The cable requires no additional components and is ready for immediate use.
Safety note
The cable must not be installed in household power systems. It is intended exclusively for prototypes, testing, and development purposes. A qualified electrician is required when working on or near electrical installations.
Scope of delivery
- 1x JST GH1.25mm - 4 P - Male - 10cm connector cable