9 V battery holder - with switch, solder pads, 53 x 30 x 27 mm
9 V battery holder - with switch, solder pads, 53 x 30 x 27 mm
This goes with it
Pay in 30 days
Pay in 30 days
Description
Product overview
- Compact battery holder for a 9 V rectangular battery
- Dimensions 53*30*27 mm
- Connection pins designed as solder pads
- Without a plug, can be soldered directly to electronics
- Suitable for standard 9 V batteries such as 6F22 or 6LR61
Product description
This battery holder accommodates a 9 V rectangular battery and supplies circuits with stabilized voltage. Since the connection is made via solder pads, no plug connection is required, allowing wires to be soldered directly to breadboards or PCB terminal strips.
The compact design is suitable for integrated power supply solutions in project boxes or portable devices with limited space. The battery holder is installed in the box together with the 9 V rectangular battery and connected to the rest of the circuit via the solder pads.
Possible applications include portable changeover switch testers, LED maintenance lights, small signal generators, or mobile experimental circuits. The absence of a plug allows for a more compact overall design.
A standard 9 V rectangular battery is required for operation and must be purchased separately. The solder pads should be connected with wires of sufficient current-carrying capacity to support the full current consumption of the connected circuit.
Safety notice
This product is intended exclusively for building prototypes and for testing and development purposes. The battery holder is not intended for operation in third-party applications or on mains power. When soldering the connection pins, pay attention to the polarity (positive and negative) of the connected circuit.
Scope of delivery
- 1* Battery holder - 1x 9 V rectangular battery, compact, without plug, with switch