Heated Bed 300 x 300 mm - 24 V, 750 W, for ANET ET5 and ET5Pro

Product overview

• Heated build plate for FDM 3D printers, size 300*300 mm
• Operating voltage 24 V, heating power 750 W
• Surface temperature up to 110 °C
• Compatible with ANET ET5 and ET5Pro
• Aluminum composite build surface with coating
• Connection via spring terminals, thermistor integrated for temperature measurement

Product description

The heated bed is a heated build platform for FDM 3D printers in the ET5 and ET5Pro series. It enables the printing of materials that require a heated base, particularly plastics such as ABS, nylon, or fiber-reinforced filaments, which would deform or detach without heating the build platform.

The bed operates with 24 V DC and provides a heating power of 750 W. The surface temperature can be controlled up to 110 °C and is measured by an integrated thermistor. The build surface is made of an aluminum composite material with an applied coating that improves print adhesion while also ensuring thermal uniformity.

The module fits into the print chamber of the ET5 series without any further modifications and is connected via spring terminals. The required 24 V power supply and temperature control are already present in these printers.

Safety information

The heated bed operates with a surface temperature of up to 110 °C and becomes hot during operation; touching it poses a risk of burns. The device is intended exclusively for operation in the designated ANET ET5 and ET5Pro 3D printers and is not designed for use outside these systems. Work on the power supply or thermistor must be carried out by qualified electricians.

Scope of delivery

• 1x ANET heated bed - replacement part for 3D printers