JLH 1969 audio amplifier - Class A, 10 W per channel, 2 pieces

Product overview

• Two Class A audio amplifiers
• 10 W output power per channel
• Input for signals from 100 mV to 1 V
• Can be assembled on a perfboard or PCB

Product description

These audio amplifiers operate according to the Class A principle and are suitable for building small amplifier stations or for experimenting with analog audio technology. Each channel provides 10 W of output power, which is sufficient for headphones, small active speakers, or test setups.

Applications range from audio laboratories and training setups to DIY projects for small speaker systems. In hobby electronics, they can also be combined with preamplifiers or tone controls. Two modules in the set enable the construction of stereo power amplifiers.

A regulated power supply is required for operation; its voltage value can be found in the component documentation and circuit diagrams. The design as individual amplifier modules requires soldering skills and responsibility when working with higher voltages.

Safety information

Particular caution is required when working on circuits with elevated operating voltages; consult a qualified electrician if in doubt. These modules are intended exclusively for building prototypes and for testing and development purposes and are not suitable for installation in the household power circuit.

Scope of delivery

• 2 x JLH 1969 Class audio amplifier with Toshiba 5200