Extruder nozzle 0.2 mm - for 2.85 mm filament, steel
Description
Product overview
- Replacement nozzle for filament 3D printers, 0.2 mm diameter
- For 2.85 mm filament
- Precision steel construction
- Compatible with standard hotend threads (M6 or M7)
- Direct replacement without modifications
Product description
The 0.2 mm extruder nozzle is a replacement wear part for filament 3D printers and determines the thickness of the plastic strands deposited on the print bed. The small opening enables significantly finer structures than standard nozzles with a 0.4 mm diameter, but requires slower print speeds and higher temperatures to push the plastic through the narrow opening while keeping it fluid enough.
The nozzle screws onto the hotend's heater block thread and replaces the worn or damaged original. Damaged nozzles can often no longer be cleaned and can affect print quality. The narrow 0.2 mm bore allows you to print the finest details, such as gears, relief patterns, or thin walls from around 0.3 mm thick, which is not possible with wider nozzles.
This size is often used for miniature models, producing highly detailed replacement parts, or manufacturing processes where surface quality is crucial. A test print with a new nozzle quickly reveals whether the print temperature is set correctly and whether the nozzle is compatible with your printer.
Operation requires a printer with a compatible hotend thread; the common sizes are M6 and M7. Only select and replace the nozzle once the printer is switched off and the heater block has cooled completely. The bore is subject to wear and can deteriorate over time due to scratches or contamination, so it needs to be replaced regularly.
Safety information
The heater block reaches operating temperatures above 200 °C. Replace the nozzle only after it has cooled down to avoid burns. This product is intended exclusively for building and operating 3D printers in private households or workshops, and not for installation in industrial or commercial production systems.
Scope of delivery
- 1* 0.2 mm extruder nozzle for 2.85 mm filament