MEAN WELL-schakelvoeding voor DIN-rail, MDR-20-5, 5V, 3A

AC-DC power supply for DIN rail; output 5 VDC at 3 A; plastic housing

Single-phase, primary-switched power supply for DIN rail mounting in a robust plastic housing. The device operates with an input voltage in the range of 85 to 264 VAC and is characterized by low no-load power consumption of less than 0,75 W. It also features a DC-OK signal output.

Suitable for direct installation on DIN rails
Enclosed design with touch-safe screw terminals
Universal input voltage range
Integrated overload protection through current limiting with automatic recovery (Auto Recovery)
Protection mechanisms against short circuit, overload and overvoltage
LED indicator showing the operating status (Power-On)
Low no-load power consumption
DC-OK signal output for monitoring the operating status

Important note:
For devices that are not ready to plug in, connection and installation may only be carried out by qualified personnel (e.g. electricians).

Features:

• Universal AC input/full range
• Protection: short circuit/overload/overvoltage
• Cooling by free air convection
• Can be installed on TS-35/7,5 or 15 DIN rail
• LED indicator for power-on
• Power consumption at no load <0,75 W
• Burn-in test at 100% full load

Overview

• Brand: MEAN WELL
• Series: MDR-20
• Model: MDR-20-5
• DC output voltage: 5V 
• Rated current: 3A
• Overall dimensions: approx. 100 x 90 x 22,5 mm

Scope of delivery:

• 1x MEAN WELL switched-mode power supply for DIN rail, MDR-20-5, 5V, 3A