{"title":"XT system","description":null,"products":[{"product_id":"xt60ew-m-panel-mount-steckverbinder-3-5-mm-vergoldete-kontakte-2-polig","title":"XT60EW-M panel-mount connector - 2-pole, 3.5 mm, 20 A","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePanel-mount connector for battery and power supply lines\u003c\/li\u003e \u003cli\u003ePanel-mount design with flange and two screw holes for installation in enclosure walls\u003c\/li\u003e \u003cli\u003e2-pin with 3.5 mm contact pins, gold-plated\u003c\/li\u003e \u003cli\u003eRated current 20 A, up to 40 A briefly at 500 V DC\u003c\/li\u003e \u003cli\u003eHigh-temperature-resistant nylon housing with brass contacts\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis panel-mount connector expands the XT60 system with a variant for fixed enclosure feedthroughs. The flange with two screw holes enables rigid mounting in front panels or enclosure walls, while the contact pins protrude from the opening and serve as the mating side for external cables or batteries. Wires can be soldered to the rear, allowing internal and external wiring to be combined through this connector.\u003c\/p\u003e \u003cp\u003eThe housing is made of high-temperature-resistant nylon, while the gold-plated brass contacts ensure low contact resistance and corrosion resistance. With a rated voltage of 500 V DC and a continuous current of 20 A (40 A briefly), the connector is suitable for power supplies with higher power requirements. The contact resistance of 0.6 mΩ keeps heat losses to a minimum, while the operating temperature range from -20 °C to 120 °C covers typical operating conditions.\u003c\/p\u003e \u003cp\u003eThis connector type is primarily used in RC models, multicopters, and drones for connecting batteries and motors, as well as in aircraft models and 3D printers as a standardized quick connector for power supply lines. For installation, two M2.5 screws (typically 12 mm long) are inserted through the flange holes. A compatible XT60 mating connector is required for use; when installing in metal enclosures, electrical clearances should be observed to prevent short circuits.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis connector is intended only for wiring DC systems in model building, prototyping, and development applications, not for installation in household electrical systems. Work on or near high-current wiring may only be performed by qualified electricians; if you have questions about safe installation or load capacity, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1× XT60EW-M 3.5 mm gold-plated panel-mount connector\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997819674973,"sku":"F23105813","price":1.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt60ew-m-panel-mount-steckverbinder-35-mm-vergoldete-kontakte-2-polig-funduino-8341503.png?v=1791474057"},{"product_id":"xt90h-f-stecker-mit-lotfahne-und-abdeckung","title":"XT90H-F high-current connector - socket with solder tab, cover, 90 A","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eXT90H F plug with female contact\u003c\/li\u003e \u003cli\u003eSolder tab for direct PCB mounting\u003c\/li\u003e \u003cli\u003eCover to prevent short circuits\u003c\/li\u003e \u003cli\u003eCurrent carrying capacity of up to 90 A\u003c\/li\u003e \u003cli\u003eGold-plated contacts for a secure connection\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe XT90H F is a high-current connector with a female contact, designed for applications with up to 90 A. The solder tab enables direct installation on printed circuit boards without additional cable ends, eliminating material and assembly effort.\u003c\/p\u003e \u003cp\u003eThe gold-plated contacts ensure low contact resistance and reliable current transmission, even with frequent plugging and unplugging. The cover reliably protects the connector against accidental contact and short circuits during storage and transport.\u003c\/p\u003e \u003cp\u003eThis connector system is used in high-performance battery packs for model making and robotics, in high-current battery management systems, and in portable power supplies with power requirements starting at around 50 A. Typical applications include LiPo battery packs for unmanned aerial vehicles and cordless tools.\u003c\/p\u003e \u003cp\u003eThe solder tab requires suitable soldering equipment, as the power contacts conduct significant amounts of heat. The connector is compatible only with matching XT90 sockets and is not supplied with an adapter cable.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe cover must be removed before plugging in the connector. Soldering work must be carried out carefully to avoid damaging the insulating material. When used in high-current systems, work on electrical circuits must be performed by qualified electricians; if you are unsure about safe wiring, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x XT90H-F connector\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997819707741,"sku":"F23107737","price":2.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt90h-f-stecker-mit-loetfahne-und-abdeckung-funduino-6236379.jpg?v=1791474095"},{"product_id":"xt60-fassung-und-stecker-mit-lotfahne-male-und-female","title":"XT60 plug and socket - solder tabs, 60 A, 6-50 V DC","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eXT60 plug and socket with solder tabs for high-current DC connections\u003c\/li\u003e \u003cli\u003eRated current up to 60 A\u003c\/li\u003e \u003cli\u003eVoltage range 6 to 50 V DC\u003c\/li\u003e \u003cli\u003eGold-plated contacts to prevent oxidation\u003c\/li\u003e \u003cli\u003eColor coding distinguishes male and female\u003c\/li\u003e \u003cli\u003eInterlocking Bakelite housing\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe XT60 plug is a high-current DC connector with solder tabs, widely used for battery power supplies and power distribution in model building, robotics, and portable energy systems. The plug-and-socket pair, with a rated current of up to 60 A, enables secure connections in the voltage range from 6 to 50 V DC. The gold-plated contacts resist corrosion and maintain low contact resistance, reducing heat losses at high currents.\u003c\/p\u003e \u003cp\u003eWhen soldering, the tabs are connected to the power supply wire, and the plugs and sockets can then be connected. The interlocking Bakelite housing prevents mix-ups and prevents unintentional connection. The red color identifies the male version, while black sockets indicate the female version. This color differentiation prevents polarity errors in multipole systems.\u003c\/p\u003e \u003cp\u003eThe plug-and-socket system replaces fixed wiring in assemblies with pluggable quick connections, such as when replacing energy storage units, in modular drive systems, or when combining voltage sources in development environments. Projects with multiple parallel power-consuming circuits benefit from the protection against short circuits provided by the locking mechanism.\u003c\/p\u003e \u003cp\u003eA soldering station and solder are required; when soldering multi-core power cables, their cross-section should be at least 2.5 to 4 mm² to achieve the permissible current-carrying capacity. XT60 mating connectors are available from specialist retailers and fit seamlessly into existing inventories thanks to their standardized geometry.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eHigh-current connectors require proper wiring and correct soldering. Not intended for installation in household electrical circuits. The product is intended exclusively for building prototypes and for testing and development purposes. Work in the immediate vicinity of electrical installations is reserved for qualified electricians; if you have questions about integrating the product into existing systems, consult a qualified electrician before commissioning.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997841170781,"sku":"F23108752","price":1.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt60-fassung-und-stecker-mit-loetfahne-male-und-female-funduino-6046717.jpg?v=1791494702"},{"product_id":"xt60-verlangerungskabel-mannlich-zu-weiblich-15-cm","title":"XT60 extension cable - male to female, 15 cm, 60 A","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eXT60 extension cable with male and female connectors\u003c\/li\u003e \u003cli\u003e15 cm length\u003c\/li\u003e \u003cli\u003efor batteries, chargers, and power consumers with an XT60 connection\u003c\/li\u003e \u003cli\u003ereverse-polarity protected by connector geometry\u003c\/li\u003e \u003cli\u003emaximum permissible current: 60 A\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis extension cable connects XT60 connectors and improves access to batteries and charger modules. The 15 cm length creates space between the power source and the consumer without adding too much weight or taking up too much space. The XT60 standard is widely used in model making, multicopter electronics, and portable power supplies.\u003c\/p\u003e \u003cp\u003eThe reverse-polarity-protected connectors prevent incorrect connections that could cause damage. The cable supports up to 60 A, making it suitable for high-current applications such as brushless motors or multiple consumers operated in parallel. The copper core with a plastic sheath combines flexibility with durability.\u003c\/p\u003e \u003cp\u003ePossible applications are varied: positioning the battery and controller farther apart in a quadcopter; making the charging socket on RC models easier to reach; combining multiple power sources via distribution boards; and powering test and development setups with a standardized connector. The cable also relieves strain on long connection paths when batteries are stored externally or on a stand.\u003c\/p\u003e \u003cp\u003eOnly a matching connector on the consumer or power source is required for use. The cable does not replace defective connectors and must not be stored uninsulated when both connection ends are unused, as there is a risk of short circuits.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eShort-term short circuits can discharge and overheat the battery. The cable is intended exclusively for building prototypes and for testing and development purposes. Work on or near electrical installations is reserved for qualified electricians.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x XT60 extension cable - male to female, 15 cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997859193181,"sku":"F23108933","price":2.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt60-verlaengerungskabel-maennlich-zu-weiblich-15-cm-funduino-7081266.jpg?v=1791493218"},{"product_id":"xt30-fassung-und-stecker-mit-lotfahne-male-und-female","title":"XT30 connectors - male and female with solder tabs, 15 A","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnector pair (plug and socket) for high-current applications\u003c\/li\u003e \u003cli\u003eConnection by soldering; crimping is not required\u003c\/li\u003e \u003cli\u003e2 gold-plated contacts per part\u003c\/li\u003e \u003cli\u003eReverse-polarity protected through a form-fitting connector mechanism\u003c\/li\u003e \u003cli\u003eRated current 15 A, 30 A for short periods\u003c\/li\u003e \u003cli\u003ePolyamide housing, temperature-resistant up to 120 °C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe XT30 connector pair consists of a plug and socket, each with two gold-plated contacts designed as solder tabs. Soldering directly to the cable is not necessary, and no crimping tool is required. The gold plating keeps contact resistance low and protects the contacts against oxidation.\u003c\/p\u003e \u003cp\u003eThe form-fitting geometry permits only one connection direction, preventing reverse polarity. The polyamide housing holds the two parts together after connection through its shape alone, without additional locking, and retains its shape during soldering.\u003c\/p\u003e \u003cp\u003eThe connector is designed for a continuous current of 15 A; short-term loads of up to 30 A are possible. This makes it the standard for connecting batteries to motors and electronic speed controllers in RC models, small robots, and LED installations. The operating temperature range from minus 20 to 120 degrees Celsius ensures safe connections even when heat is generated.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eWhen soldering, safety guidelines for soldering work must be observed. This product is intended exclusively for building prototypes and for testing and development purposes. If you have questions about current capacity or use in electrical systems, consult a qualified electrician before commissioning.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997860405597,"sku":"F23108599","price":1.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt30-fassung-und-stecker-mit-loetfahne-male-und-female-funduino-2407100.jpg?v=1791493233"},{"product_id":"xt90e-m-steckverbinder-fassung-fur-gerateeinbau","title":"XT90E-M connector - panel-mount socket with thread, 90 A","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePanel-mount connector socket for high-current applications in device installations\u003c\/li\u003e \u003cli\u003eXT90E standard design with thread for mounting on control panels and in devices\u003c\/li\u003e \u003cli\u003eRated current up to 90 A, suitable for DC applications with extremely high current throughput\u003c\/li\u003e \u003cli\u003eGold-plated contacts for secure and corrosion-resistant connections\u003c\/li\u003e \u003cli\u003eMechanically robust, with a self-locking connection system to prevent accidental disconnection\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe XT90E M connector socket is a high-current connector with a threaded adapter for installation in control cabinets, power distribution boxes, or directly in battery systems. The self-locking connection system prevents accidental disconnection under high mechanical loads and vibrations, such as those occurring in mobile or industrial applications.\u003c\/p\u003e \u003cp\u003eThe socket is designed for continuous currents of up to 90 A and can therefore supply high-power loads such as electric motors, inverters, or charging devices. The gold-plated contacts minimize contact resistance and heat loss even under prolonged loads. The thread enables secure, vibration-resistant mounting on front panels or control panels.\u003c\/p\u003e \u003cp\u003eTypical applications include battery management in electric vehicles, mobile power supply systems, and industrial switchgear with high current throughput. Setups with multiple parallel power sources also benefit from the reliable locking mechanism and large conductor cross-sections.\u003c\/p\u003e \u003cp\u003eProperly sized conductor cross-sections and protective devices (fuses or circuit breakers) on the device side are required for operation. At voltages above 48 V, a connector connection is considered serviceable only with appropriate documentation and under the supervision of a qualified electrician. The socket alone is a component; system integration requires expert planning.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe connector is intended exclusively for building high-current systems in prototypes as well as test and development applications and is not intended for installation in household electrical circuits. Work on or near electrical installations must be carried out by qualified electricians; if you are unsure about correctly integrating it into a power system, consult a qualified electrician before commissioning. Check the contacts for contamination before assembly and ensure correct polarity.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x XT90E-M connector\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66042956317021,"sku":"F23107639","price":2.34,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt90e-m-steckverbinder-fassung-fuer-geraeteeinbau-funduino-6764606.jpg?v=1791487207"},{"product_id":"xt90-s-xt90-stecker-und-buchse-anti-funken-verbindung","title":"XT90-S high-current connector - anti-spark, plug and socket","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eXT90-S connector with anti-spark function\u003c\/li\u003e \u003cli\u003ePlug and socket included\u003c\/li\u003e \u003cli\u003eHigh-current connector for battery applications\u003c\/li\u003e \u003cli\u003eAutomatically makes contact under load\u003c\/li\u003e \u003cli\u003eGold-plated contacts for low contact resistance\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe XT90-S is a high-current connector for safely connecting batteries to devices and charging systems. The anti-spark function automatically connects through a spring-loaded pre-charge resistor before the main contacts make contact. This eliminates dangerous arcs when plugging in under load and protects electronic circuits.\u003c\/p\u003e \u003cp\u003eThanks to the gold-plated contacts, contact resistance is minimal, and voltage losses remain low even at high current levels. The connector is suitable for high-energy applications such as drone batteries, electric vehicle battery packs, or mobile charging systems where reliable power transmission without downtime is required.\u003c\/p\u003e \u003cp\u003eEspecially in mobile robotics projects and portable energy storage systems, the anti-spark version proves advantageous because it allows repeated connection and disconnection during the testing phase without damaging the contacts. The pair also saves materials and assembly time when upgrading existing XT90 connections.\u003c\/p\u003e \u003cp\u003eBoth parts of the connector are included. For secure retention during frequent connection, additional securing with a housing or fixtures is recommended according to the project-specific assembly plan.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe connector's high-current capability requires proper wiring in accordance with the safety regulations for battery applications. Before use in household electrical circuits or grid-connected systems, a qualified electrician must be consulted. The connector is intended exclusively for prototypes, testing, and development purposes with insulated low-voltage batteries.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x XT90-S \/ XT90 anti-spark connector, male\/female (1 female + 1 male)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66042956906845,"sku":"F23107611","price":4.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt90-s-xt90-stecker-und-buchse-anti-funken-verbindung-funduino-3086869.jpg?v=1791487209"},{"product_id":"master-xt150-hochstrom-steckverbinder-set-6mm-farbauswahl","title":"XT150 connector set - high-current 6 mm, gold-plated, various colors","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnector set for high-current connections, 6 mm contact diameter\u003c\/li\u003e \u003cli\u003eavailable in several color variants\u003c\/li\u003e \u003cli\u003efor direct-current circuits in model making and electric mobility\u003c\/li\u003e \u003cli\u003egold-plated contacts for reliable current transfer\u003c\/li\u003e \u003cli\u003eset includes plugs and sockets for combining\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe XT150 high-current connector set reliably connects circuits carrying high currents. The 6 mm contacts enable reliable current transfer without significant contact losses. Thanks to the gold-plated surfaces, contact quality remains stable over many operating cycles.\u003c\/p\u003e \u003cp\u003eThe plugs and sockets can be freely combined and extend existing systems without the need for tools. Multiple colors make it possible to mark polarity, preventing mix-ups. The principle is simple: spring-loaded contacts mechanically hold the connection, while the gold plating electrically optimizes current flow.\u003c\/p\u003e \u003cp\u003eIn model making, these connectors connect motors to batteries without requiring a separate current limiter. They are also suitable for use in electric mobility and high-current test setups as a quick interface between batteries and loads. The color variants make handling significantly easier when several circuits are set up alongside one another.\u003c\/p\u003e \u003cp\u003eOperation requires only a high-current battery or a suitable power source. The exact maximum current rating depends on the specific current level used and should be coordinated with the power source before commissioning.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eHigh-current applications pose a risk of burns and fire due to arcing and overheating. Never work on the connectors while they are energized, and do not use them under strong mechanical stress. This set is intended exclusively for building prototypes and for testing and development purposes; it is not intended for installation in household electrical circuits.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x XT150-F connector\u003c\/li\u003e \u003cli\u003e1x XT150-M connector\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Blue","offer_id":66043029913949,"sku":"F23107700","price":2.98,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":66046348689757,"sku":"F23107720","price":2.98,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":66048131694941,"sku":"F23105812","price":2.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-xt150-hochstrom-steckverbinder-set-6mm-farbauswahl-funduino-7974436.jpg?v=1791487313"},{"product_id":"xt60w-f-buchse-3-5mm-vergoldet-fur-rc-flugzeuge-drohnen","title":"XT60 W-F socket - 3.5 mm connector, gold-plated","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eXT60 W female connector with 3.5 mm contacts\u003c\/li\u003e \u003cli\u003eGold-plated contacts for a secure power connection\u003c\/li\u003e \u003cli\u003eFor batteries and electronics in RC aircraft\u003c\/li\u003e \u003cli\u003eDesigned for 10 pairs\u003c\/li\u003e \u003cli\u003eSolderable via pin contacts\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe XT60 W is a connector that connects batteries to onboard equipment in RC aircraft. The system consists of a male and female connector with 3.5 mm diameter contacts. The gold plating keeps the contacts corrosion-resistant and preserves their conductivity even after repeated connection cycles.\u003c\/p\u003e \u003cp\u003eThe two contacts are connected from the outside via solder pads, allowing the connector to be integrated into existing circuits. Its design enables secure locking and prevents loose connections under the vibration and acceleration forces to which model aircraft are exposed.\u003c\/p\u003e \u003cp\u003eTypically, such connectors are used in high-performance models as an interface between the battery and ESC or between the ESC and motor. These connectors are also standard equipment in multicopter systems with separately controlled motors. The connector is particularly advantageous where batteries are changed frequently or assemblies need to be connected modularly.\u003c\/p\u003e \u003cp\u003eSoldering experience and suitable solder are required for the connection. The contacts must be soldered continuously to prevent connection faults. Since the connector is subjected to loads, mechanically stable installation is essential.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eHigh-current connections can cause burns and pose a fire hazard if wired incorrectly; check the polarity before connecting. The connector is intended exclusively for building model aircraft and for testing and development purposes. Work on or near electrical installations must be carried out by qualified electricians.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x XT60W female connector 3.5 mm, gold-plated - for RC aircraft, -drones\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66043057045853,"sku":"F23107271","price":1.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt60w-f-buchse-35mm-vergoldet-fuer-rc-flugzeuge-drohnen-funduino-2784546.jpg?v=1791484294"},{"product_id":"adapter-stecker-kabel-xt60-male-auf-trx-female","title":"XT60 to TRX adapter cable - male to female","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter for connecting XT60 plugs to TRX sockets\u003c\/li\u003e \u003cli\u003eMale XT60 plug to female TRX socket\u003c\/li\u003e \u003cli\u003eEnables compatibility between different battery systems\u003c\/li\u003e \u003cli\u003eLow transition resistance and secure contact\u003c\/li\u003e \u003cli\u003eSuitable for RC models, drones, and portable power supplies\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis adapter connects XT60 plugs to TRX sockets, bridging the incompatibility between two widely used battery connection systems. The male XT60 connector is securely inserted into the female TRX socket, with the contacts aligned precisely.\u003c\/p\u003e \u003cp\u003eXT60 plugs are commonly used with lithium batteries for RC models and drones, while TRX systems are standard in other device categories. The adapter allows batteries from one system to be used with devices from the other without resoldering the plugs. This makes it possible to use battery stocks flexibly and interchange different power sources.\u003c\/p\u003e \u003cp\u003eIn practical applications, the adapter can be used with XT60 batteries and TRX-based receivers or chargers. It also simplifies switching between power sources when operating FPV drones or aircraft models equipped with different battery generations. The only critical point is that the adapter's current-carrying capacity corresponds to that of the weaker of the two connector systems, so the permissible current ranges of both devices should be checked before connection.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe adapter is intended exclusively for prototype construction and testing and development purposes. Connecting or disconnecting under load can generate electric arcs. Before commissioning, verify that the battery voltage and the adapter's current-carrying capacity are compatible with the requirements of the connected device.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66044705767773,"sku":"F23108388","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/adapter-stecker-kabel-xt60-male-auf-trx-female-funduino-9134064.png?v=1791488401"},{"product_id":"xt60-c-male-steckverbinder","title":"XT60-C connector - male, 30 A, gold-plated","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eXT60 connector, C version, male\u003c\/li\u003e \u003cli\u003eRated current 30 A\u003c\/li\u003e \u003cli\u003eContact resistance below 1 mΩ\u003c\/li\u003e \u003cli\u003eGold-plated contacts\u003c\/li\u003e \u003cli\u003eFast locking through a form-fitting plug-in system\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe XT60 connector in the C version is used to connect high-current circuits in RC models, multirotors, and portable energy storage systems. The form-fitting plug-in system locks mechanically when plugged in, eliminating loose connections and ensuring a reliable connection even under vibration.\u003c\/p\u003e \u003cp\u003eThe male contact carries up to 30 A continuously, while the gold plating keeps the contact resistance below 1 mΩ, minimizing heat losses. The C version differs from classic XT60 versions in its connection geometry and space requirements, which is relevant when installation space is limited.\u003c\/p\u003e \u003cp\u003eExamples of use include connecting battery packs to chargers in drones and FPV racing quadcopters, powering high-load DC motors in mobile robots, or connecting multiple lithium-polymer batteries in parallel. In stationary test setups, the secure plug-in system enables quick configuration changes without additional tools.\u003c\/p\u003e \u003cp\u003eA suitable mating connector that accepts the C version is required for operation. When connecting multiple batteries in parallel using several XT60 connections, all connections must have identical resistance to ensure charge balancing and even current distribution.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eAt high current levels, connectors and cables can become considerably warm. Work with the connector is intended exclusively for the assembly, testing, and development of prototypes. Consult a qualified electrician if you are unsure about sizing the connected circuits.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x XT60-C male connector\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045118873949,"sku":"F23107687","price":1.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt60-c-male-steckverbinder-funduino-5218894.jpg?v=1791488287"},{"product_id":"ladekabel-xt90-auf-4mm-bananenstecker-15cm-goldstecker","title":"Charging cable XT90 to 4 mm banana plugs - 15 cm, gold-plated","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable between XT90 connectors and 4 mm banana plugs\u003c\/li\u003e \u003cli\u003eLength: 15 cm\u003c\/li\u003e \u003cli\u003eGold-plated contacts to reduce contact resistance\u003c\/li\u003e \u003cli\u003eFor powering models and devices with different connector systems\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis adapter cable connects XT90 connectors to 4 mm banana plugs, bridging compatibility gaps between different power supply systems. The gold-plated contacts keep contact resistance low and enable stable power transfer even at higher charging currents.\u003c\/p\u003e \u003cp\u003eWith a length of 15 cm, the cable is suitable for applications in which batteries and devices are positioned close to each other. It is suitable for operating aircraft models, RC vehicles, or portable devices that are charged or powered using XT90 batteries, while their consumers require 4 mm banana plugs.\u003c\/p\u003e \u003cp\u003eCorrect polarity must be observed precisely when connecting the cable; an incorrectly polarized cable will damage the connected device. The cable is intended exclusively for operating models and devices in the low-voltage range, as commonly used in hobby and development projects.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe cable is not intended for installation in the household power supply. It is intended exclusively for powering models and devices in the low-voltage range and for testing and development purposes. If you are unsure about the polarity or current-carrying capacity, consult a qualified electrician before connecting it.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045121266013,"sku":"F23108385","price":6.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/ladekabel-xt90-auf-4mm-bananenstecker-15cm-goldstecker-funduino-2949271.png?v=1791488525"},{"product_id":"xt60-fassung-und-stecker-male-female-auf-t-plug-male-female-adapter-stecker","title":"XT60 to T-Plug Adapter - Female to Male","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter for connecting XT60 plugs and T-Plug connections\u003c\/li\u003e \u003cli\u003eXT60 socket on one side, T-Plug plug on the other side\u003c\/li\u003e \u003cli\u003eEnables compatibility between batteries and devices with different connector types\u003c\/li\u003e \u003cli\u003eCompactly sized for model building and drones\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis adapter connects power supplies with an XT60 socket to devices with a T-Plug connection. It bridges the incompatibility between the two widely used connector types without requiring the plugs to be resoldered.\u003c\/p\u003e \u003cp\u003eThe design, with a socket on one side and a plug on the other, enables the direct connection of XT60 batteries to T-Plug devices. This allows you to use the existing power supply without modifying components. The mechanical fit prevents incorrect connections and does not loosen during normal use.\u003c\/p\u003e \u003cp\u003eIn drone, multicopter, and RC model building, this eliminates the need to switch between different battery types or resolder connections when changing between devices in the same device family. The adapter also facilitates the transition when switching from older to newer batteries with different connector types, provided that the current ratings of both systems are compatible.\u003c\/p\u003e \u003cp\u003eThe adapter allows existing battery packs with both connector types to be reused. Pay attention to the rated currents and rated voltages of both connected components; the adapter itself does not provide current limiting.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis adapter is designed exclusively for use with high-current DC devices in model building. It is not suitable for household electrical circuits or stationary power supplies. Plugs and the adapter can generate heat in the event of short circuits or overloads. Regularly check the connections for a secure fit and signs of wear.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045375873373,"sku":"F23108389","price":4.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt60-fassung-und-stecker-malefemale-auf-t-plug-malefemale-adapter-stecker-funduino-2539820.png?v=1791488046"},{"product_id":"adapter-stecker-kabel-xt60-female-auf-trx-male","title":"XT60 adapter cable - socket to TRX plug","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter for connecting XT60 sockets to TRX plugs\u003c\/li\u003e \u003cli\u003eEnables power transfer between incompatible connector systems\u003c\/li\u003e \u003cli\u003eFor batteries, chargers, and devices with different connector types\u003c\/li\u003e \u003cli\u003eRobust contacts made of copper alloy\u003c\/li\u003e \u003cli\u003eSecure locking through mechanical design\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis adapter connects XT60 and TRX connector systems when power sources and devices use different connector standards. The cable directly connects the contacts of both systems and transfers power without conversion.\u003c\/p\u003e \u003cp\u003eThe adapter enables XT60 batteries to be used with TRX devices or vice versa, without modifying the plugs. Connection and disconnection are performed by plugging and unplugging mechanically; accidental reversal is prevented by the different shapes.\u003c\/p\u003e \u003cp\u003eTypical applications include exchanging power between different drone batteries and chargers, operating RC models with batteries from other systems, or making existing equipment more flexible without purchasing new equipment. The adapter also simplifies operation and maintenance in workshops with mixed hardware.\u003c\/p\u003e \u003cp\u003eThe adapter requires no activation or programming. It is important that both systems being connected have the same nominal voltage, as otherwise damage may occur. Refer to the datasheet specifications for the length and current-carrying capacity; for currents in the higher ampere range, the cable cross-section should be adequately dimensioned.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eBefore connecting, check that the voltages of both systems match, as incorrect connections can cause damage. The adapter is not intended for installation in household power supplies and is used exclusively for building prototypes and for testing and development purposes. In the event of damage or uncertainty, consult a qualified electrician before commissioning.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045439902045,"sku":"F23108387","price":3.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/adapter-stecker-kabel-xt60-female-auf-trx-male-funduino-2174192.png?v=1791489033"},{"product_id":"xt90e-mannlich-xt90h-weiblich-steckverbinder-set","title":"XT90E + XT90H connector set - male and female, 90 A, gold-plated","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eHigh-current connector in XT90 design, one male and one female connector\u003c\/li\u003e \u003cli\u003eRated current up to 90 A, gold-plated contacts\u003c\/li\u003e \u003cli\u003ePolarity protection through asymmetrical connector design\u003c\/li\u003e \u003cli\u003e5.5 mm flat contacts for conductor cross-sections up to 6 mm²\u003c\/li\u003e \u003cli\u003eWidely used in high-energy applications\u003c\/li\u003e \u003cli\u003eSet with one male and one female connector\u003c\/li\u003e \u003cli\u003eSolder connection without additional tools\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe XT90 connector is a high-current connection for DC systems with rated currents up to 90 A. The set contains one male and one female connector with gold-plated contacts that ensure low contact resistance. The asymmetrical connector geometry prevents mix-ups and makes reverse polarity impossible.\u003c\/p\u003e \u003cp\u003eThe flat contacts fit conductor connections up to 6 mm², are soldered, and require no specialized tools. The design enables high currents while maintaining comparatively compact dimensions. Gold plating keeps contact resistance low even after repeated connection and disconnection.\u003c\/p\u003e \u003cp\u003eApplications include high-energy systems such as battery packs in multicopters or electric vehicles, where two- or three-digit currents flow over long periods. The XT90 has also become established in laboratory setups with high battery voltages and suitable chargers. Emergency route lighting with backup batteries also uses this connector.\u003c\/p\u003e \u003cp\u003eThe gold-plated contacts require careful storage to prevent contamination. Soldering temperatures should not exceed 350 °C to avoid damaging the contact coating. For continuous high currents under vibration, ensure secure, strain-free solder connections.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eAt currents above 50 A, the contacts may briefly heat up during connection. This product is intended exclusively for prototyping, laboratory setups, and test development and is not suitable for installation in household electrical circuits. If you are unsure about the correct sizing of the cable and solder connection, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003ePackage contents\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x XT90E-M\u003c\/li\u003e \u003cli\u003e1x XT90H-F\u003c\/li\u003e \u003cli\u003e1x Cover\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045562847581,"sku":"F23107740","price":4.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt90e-maennlich-xt90h-weiblich-steckverbinder-set-funduino-6227531.jpg?v=1791489152"},{"product_id":"t-plug-male-auf-xt60-female-adapter-stecker-kabel","title":"Adapter cable T-Plug Male to XT60 Female","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter for battery connectors, connects T-Plug male to XT60 female socket\u003c\/li\u003e \u003cli\u003eEnables compatibility between T-Plug and XT60 systems\u003c\/li\u003e \u003cli\u003eFor use in model building, drones, and electric vehicles\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis adapter bridges the incompatibility between two widely used battery connector systems in model building and electric mobility. A T-Plug connector attached on one side connects to an XT60 socket on the other, allowing batteries with a T-Plug connection to be connected to devices with an XT60 receptacle, or vice versa by using additional adapters.\u003c\/p\u003e \u003cp\u003eThe cable allows existing batteries to be used without having to fit them with new connectors. The method of contacting in both connector systems remains unchanged; there is no level adjustment or voltage conversion. The cable with its soldered or crimped connectors saves time when integrating batteries and carrying out modifications.\u003c\/p\u003e \u003cp\u003eThe adapter is used when operating quadcopters and drones with batteries equipped with different connectors, in RC electric vehicles when switching between different battery stocks, and for the flexible power supply of portable tools and model building components. A common situation is the gradual development of heterogeneous model fleets in which older T-Plug batteries are still intended to power new XT60 electric models.\u003c\/p\u003e \u003cp\u003eThe cable is used without an additional power supply or power adapter. The maximum current-carrying capacity depends on the design of the connector system and the wire gauges used; these specifications are subject to the manufacturer's data. Reversing the polarity causes a short circuit and damage; check the polarity before connecting.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eReversing the polarity of this adapter causes a direct short circuit and may result in fires, explosions, or destruction of connected devices. Carefully check the connections and polarity. The cable is intended exclusively for building prototypes and for testing and development purposes and must not be connected to the household electrical circuit. Work on or near electrical installations must be carried out by qualified electricians; if in doubt, consult a qualified electrician.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045610197341,"sku":"F23108598","price":2.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/t-plug-male-auf-xt60-female-adapter-stecker-kabel-funduino-8921555.png?v=1791489354"},{"product_id":"xt120-steckverbinder-set-2x-stecker-2x-buchse-2x-abdeckung","title":"XT120 connector set - 2x plug, 2x socket, 2x cover, 120 A","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnector set with two XT120 plugs and sockets each\u003c\/li\u003e \u003cli\u003eHigh-current connector rated for up to 120 A\u003c\/li\u003e \u003cli\u003eGold-plated contacts for secure, corrosion-resistant connections\u003c\/li\u003e \u003cli\u003eFlat plug design fits in battery housings and compact cabinets\u003c\/li\u003e \u003cli\u003eContains two sets of A, four plugs and four sockets in total\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe XT120 is a high-current connector for connections of up to 120 A, for example in solar systems, energy storage systems, or mobile power supplies. The set contains two complete plug-and-socket pairs, enabling several independent high-current circuits or a redundant backup system.\u003c\/p\u003e \u003cp\u003eThe gold-plated contacts ensure secure connections even with frequent plugging and unplugging. The flat connector design fits in tight battery housings and control cabinets where larger connectors would not fit. When wiring, ensure that the current-carrying conductors are safely insulated; interrupting high-current connections in the event of a fault requires specialist expertise.\u003c\/p\u003e \u003cp\u003eTypical applications include connecting solar panels to charge controllers, connecting energy storage systems to inverters, or separating circuits in mobile or stationary battery systems. This type of connector is also used in emergency power generator installations to allow generators to be flexibly connected and disconnected.\u003c\/p\u003e \u003cp\u003eThe connectors are mechanically durable and withstand vibrations, making them suitable for mobile vehicle applications as well. For safe operation, the cross-section of the connected cables must be appropriate for the current; professional inspection of the installation is required for connecting wires carrying approximately 50 A or more.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eFor currents of 50 A or more, work on cables and connectors must be carried out or inspected by a qualified electrician. This product is intended exclusively for building test and development systems and prototypes. Incorrectly polarized or inadequately insulated high-current connections can cause fires; consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x XT120 connector set (plug, socket, covers)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045613441373,"sku":"F23107775","price":7.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt120-steckverbinder-set-2x-stecker-2x-buchse-2x-abdeckung-funduino-7777799.jpg?v=1791489585"},{"product_id":"adapterkabel-10cm-jst-bec-weiblich-zu-xt60-mannlich","title":"JST-BEC to XT60 adapter cable - 10 cm, female to male","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable, 10 cm long\u003c\/li\u003e \u003cli\u003eFemale JST-BEC connector to male XT60 connector\u003c\/li\u003e \u003cli\u003eConnects batteries with a BEC connector to devices with an XT60 input\u003c\/li\u003e \u003cli\u003eReverse polarity protection through connector geometry\u003c\/li\u003e \u003cli\u003eSuitable for LiPo and LiFePo batteries\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe adapter cable bridges the incompatibility between two common battery connector standards. The JST-BEC connector is on the female side and accepts batteries equipped with this connector, while the XT60 connector on the male side connects to the power distribution system or device. The 10 cm cable provides just enough flexibility to allow the battery pack and load to be arranged in a space-saving manner when necessary.\u003c\/p\u003e \u003cp\u003eThe design uses the geometric precision of both connector types; reverse polarity is effectively prevented by their different shapes. The cable itself contains no electronics; it only transfers power. If you have batteries with a BEC connector but want to operate a device with an XT60 input, this cable eliminates the need for a separate adapter cable in the opposite direction.\u003c\/p\u003e \u003cp\u003eThese cables are typically used in model aviation, multirotor applications, and electric vehicle projects. In laboratory setups, the adapter cable also eliminates the need to solder a transition between standards when pre-assembled components with different connector histories are combined. It is important to connect only batteries with sufficient capacity and the appropriate number of cells to avoid overloading the cable.\u003c\/p\u003e \u003cp\u003eThe cable is designed for LiPo and LiFePo batteries. Its current-carrying capacity depends on the wire gauge. Before purchasing, check whether the current drawn by the intended battery is within the cable specifications to prevent overloading and resulting damage.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eLithium-polymer batteries require proper handling and must not be damaged, excessively heated, or charged incorrectly. The cable is intended exclusively for building prototypes and for testing and development purposes; it is not designed for permanent integration into devices. Work on or near electrical installations must be carried out by qualified electricians. If you are uncertain about the correct wiring or current-carrying capacity, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 10 cm adapter cable - female JST BEC to male XT60\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045614260573,"sku":"F23107723","price":2.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/adapterkabel-10cm-jst-bec-weiblich-zu-xt60-maennlich-funduino-2651279.jpg?v=1791489579"},{"product_id":"xt60w-steckverbinderset-stecker-buchse","title":"XT60 W Connector Set - Plug and Socket, 60 A, Gold-Plated","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eXT60 W connector set with plug and socket\u003c\/li\u003e \u003cli\u003eRated current: 60 A\u003c\/li\u003e \u003cli\u003eContacts made of gold-plated brass\u003c\/li\u003e \u003cli\u003ePolarized plastic housing\u003c\/li\u003e \u003cli\u003eDesigned for lithium batteries and high currents\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe XT60 W connector set safely connects energy storage devices and consumers carrying high currents. The connector set supports 60 A in continuous operation and is therefore particularly suitable for high-performance applications with lithium batteries.\u003c\/p\u003e \u003cp\u003eThe gold-plated brass contacts provide a reliable, corrosion-resistant connection. Internal polarization prevents the plug and socket from being connected the wrong way around, protecting batteries and electronics from damage caused by reverse polarity.\u003c\/p\u003e \u003cp\u003eThe connector system is used in remote-controlled vehicles, drones, and multicopters, where reliable high-current flow between the battery and controller is essential. It is also used in mobile battery stations and for charging high-performance battery packs to safely transmit high currents.\u003c\/p\u003e \u003cp\u003eThe set contains a plug and socket for immediate use. The user must still provide a soldered connection or mechanical connection to the battery pack or electronics.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eAt a continuous current of 60 A, the contacts generate heat and voltage drops that can cause damage or fires if the connection is poor. The plug and socket must be firmly seated and must not be connected or disconnected during operation. The connector system is intended exclusively for building prototypes and for testing and development purposes with batteries. Working on high-current circuits requires specialist knowledge; if you are unsure, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x XT60W connector set (plug + socket)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045626450269,"sku":"F23107662","price":2.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt60w-steckverbinderset-stecker-buchse-funduino-6831158.jpg?v=1791489766"},{"product_id":"adapter-xt60-male-auf-t-plug-female-kabel","title":"Adapter cable XT60 plug to T-Plug socket - 12 AWG, 30 A","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable with XT60 male plug to T-Plug female socket\u003c\/li\u003e \u003cli\u003eConnects XT60 batteries to T-Plug devices\u003c\/li\u003e \u003cli\u003ePre-assembled cable requiring no soldering\u003c\/li\u003e \u003cli\u003eFor use in RC models, drones, and portable power supplies\u003c\/li\u003e \u003cli\u003eTypical 12 AWG cross-section for moderate current loads\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis adapter cable bridges the incompatibility between XT60 and T-Plug systems. The XT60 male plug connects to the female T-Plug socket, enabling XT60 batteries to be connected directly to devices with a T-Plug connection.\u003c\/p\u003e \u003cp\u003eThe cable is pre-assembled and ready for use; no soldering is required. The wire, with its typical 12 AWG cross-section, is suitable for continuous currents of up to approximately 30 A; higher values are also possible for short-term use. Overcurrent must be avoided to prevent cable fires.\u003c\/p\u003e \u003cp\u003eThe adapter cable is used in drones and RC models when the battery and receiver use different connector systems. It is also useful for testing or temporarily operating T-Plug devices with available XT60 batteries.\u003c\/p\u003e \u003cp\u003eFor operation, all that is needed is the battery and the target device, provided both have intact connectors. The contacts should be checked regularly for wear and cleaned when necessary.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis cable is intended exclusively for prototype assembly and testing and development purposes and is not suitable for installation in the household power circuit. Improper use or excessive current can create a fire hazard. Consult a qualified electrician before connecting it to high-capacity or industrial power supplies.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045630185821,"sku":"F23108792","price":2.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/adapter-xt60-male-auf-t-plug-female-kabel-funduino-5187335.png?v=1791489894"},{"product_id":"adapterkabel-10cm-jst-bec-mannlich-zu-xt60-weiblich","title":"JST BEC to XT60 adapter cable - 10 cm, male to female","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable for connecting JST-BEC plugs to XT60 sockets\u003c\/li\u003e \u003cli\u003eLength: 10 cm\u003c\/li\u003e \u003cli\u003eMale JST-BEC plug to female XT60 socket\u003c\/li\u003e \u003cli\u003eEnables the use of BEC-equipped power supplies with XT60 connections\u003c\/li\u003e \u003cli\u003eColor-coded red and black wires\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis adapter cable connects power supplies with a JST-BEC plug to devices with XT60 sockets. The two connector types are not compatible, so the cable serves as an interface and prevents overvoltage or reverse polarity when connecting directly. At ten centimeters long, the cable is compact enough for tight installation spaces while still providing sufficient slack for routing inside devices.\u003c\/p\u003e \u003cp\u003eThe cable is plugged between a BEC-equipped power source and the consumer's XT60 connection. Connect the red wire to red and the black wire to black; the color coding prevents mix-ups. The contacts are soldered rather than crimped, ensuring reliable contact over many connection cycles.\u003c\/p\u003e \u003cp\u003eThe adapter cable is typically used in drone, RC model, and battery-powered applications where different chargers and power supplies with various connector types need to be connected. It significantly simplifies equipment setups when individual components do not need to be rewired to connect them.\u003c\/p\u003e \u003cp\u003eThe cable is designed exclusively for direct current and low voltages up to the rated load limits specified for the connector types. Longer cable runs or significantly higher current flows require thicker wires to prevent voltage drops.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eIncorrectly polarized or damaged connectors can cause short circuits and present a fire hazard. Check the polarity before each connection. This cable is intended exclusively for building prototypes and for testing and development purposes; it is not intended for installation in household electrical circuits. If connectors or wires are damaged, consult a qualified electrician before use.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 10 cm adapter cable - female JST BEC to male XT60\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045641556317,"sku":"F23107623","price":2.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/adapterkabel-10cm-jst-bec-maennlich-zu-xt60-weiblich-funduino-1205405.jpg?v=1791489248"},{"product_id":"xt60-ladekabel-weiblich-auf-5-5mm-x-2-5mm-dc-buchse","title":"XT60 adapter cable, female - DC socket 5,5 x 2,5 mm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable for batteries and power supplies\u003c\/li\u003e \u003cli\u003eXT60 female connector to 5.5 * 2.5 mm barrel connector\u003c\/li\u003e \u003cli\u003eConnects XT60 systems to standard power supplies\u003c\/li\u003e \u003cli\u003eMolded copper contacts\u003c\/li\u003e \u003cli\u003eSuitable for LiPo batteries with an XT60 connection\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis adapter cable connects lithium-polymer batteries with an XT60 connection to commercially available power supplies with a 5.5 * 2.5 mm barrel connector. The female XT60 connector on one side receives the charging voltage from the power supply, and the cable transfers it to the battery trap.\u003c\/p\u003e \u003cp\u003eThe cable uses copper contacts for reliable power transmission. The molded connectors protect against short circuits and moisture. This is particularly important with frequent charging and discharging cycles.\u003c\/p\u003e \u003cp\u003eTypical applications include charging multicopter batteries, model vehicle batteries, or stationary robotics power supplies with standard power supplies. The cable eliminates the need to purchase specialized chargers when suitable power supplies are already available.\u003c\/p\u003e \u003cp\u003eA power supply with a 5.5 * 2.5 mm barrel connector and a suitable output voltage for the connected battery is required. The cable itself does not store energy and requires no further activation.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eIncorrect polarity will irreparably damage the battery; check the power supply's voltage polarity before first use. The cable is intended exclusively for charging batteries and for development work with battery power supplies, not for connection to the household electrical installation. If you are unsure about the correct connection, consult a qualified electrician before charging.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x XT60 female charging cable to 5.5mm x 2.5mm female DC connector\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045642572125,"sku":"F23107693","price":5.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt60-ladekabel-weiblich-auf-55mm-x-25mm-dc-buchse-funduino-8283375.png?v=1791490628"},{"product_id":"stecker-und-buchse-xt30-18awg-mit-kabel-10cm","title":"XT30 connector - plug and socket, 18 AWG, 10 cm cable","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eXT30 plug and socket pair with 10 cm cables soldered on\u003c\/li\u003e \u003cli\u003e18 AWG cross-section, suitable for currents up to 30 A\u003c\/li\u003e \u003cli\u003eGold-plated contacts for a secure connection\u003c\/li\u003e \u003cli\u003eFlat, compact design for tight installation spaces\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe XT30 plug\/socket set consists of a pair of ready-to-use connectors, each with a 10 cm piece of cable. The gold-plated contacts ensure low contact resistance even after repeated plugging and unplugging. The 18 AWG cross-section (nominal cross-sectional area approximately 0.75 mm²) enables safe current transmission of up to 30 A without overheating.\u003c\/p\u003e \u003cp\u003eThe design with flat, wide contacts distributes the current density over a large area and reduces contact resistance. The compact dimensions allow use even in confined installation spaces, such as those commonly found in drones, portable energy storage devices, or RC models. The gold-plated surface protects against oxidation and corrosion.\u003c\/p\u003e \u003cp\u003eThe connector set is suitable for powering motor controllers in multicopters, replacing batteries in portable devices, or connecting power distributors to receiver electronics in RC vehicles. For high-current applications above 20 A, the connector temperature should be checked regularly.\u003c\/p\u003e \u003cp\u003eThe cables are already soldered; another set must be used for different lengths or cross-sections.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe connector is intended exclusively for power supply in prototypes and test setups, not for use in household electrical circuits. When carrying currents above the rated capacity, there is a risk of fire due to overheating of the contacts. Work on energy-storage components, such as batteries and capacitors, should only be carried out when they are de-energized.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x XT30 plug and socket, 18 AWG with cable (10 cm)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045646864733,"sku":"F23107659","price":3.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/stecker-und-buchse-xt30-18awg-mit-kabel-10cm-funduino-8483603.png?v=1791491663"},{"product_id":"xt60-verlangerungskabel-mannlich-zu-weiblich-10-cm","title":"XT60 extension cable - male to female, 10 cm, 60 A","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eXT60 extension cable with male and female connectors\u003c\/li\u003e \u003cli\u003eLength: 10 cm\u003c\/li\u003e \u003cli\u003eTwist-proof thanks to the polymer nose\u003c\/li\u003e \u003cli\u003eDesigned for LiPo batteries and power supplies up to 60 A\u003c\/li\u003e \u003cli\u003eGold-plated contacts for corrosion protection\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis extension cable connects XT60 connectors and creates space between the battery and the load. With a male end for plugging into female sockets and a female end for accepting male connectors, it is the classic intermediate piece for modular power supplies. The 10 cm length bridges typical mounting distances without being cumbersome.\u003c\/p\u003e \u003cp\u003eThe gold-plated contacts reduce oxidation and voltage drops during operation. The polymer nose prevents mix-ups and accidental reverse polarity, which could cause irreparable damage to chargers or electronics. The cable carries currents of up to 60 A without overheating, as commonly required in larger multicopter systems, LiPo chargers, and RC models.\u003c\/p\u003e \u003cp\u003eThe short extension distance makes the cable indispensable when the battery and power regulator need to be positioned close together or when an already used XT60 connector needs to be supplemented with a second connection point. In drone setups with multiple power consumers, for example, it can be inserted as a distribution element without making the wiring unnecessarily long.\u003c\/p\u003e \u003cp\u003eIt is compatible with all devices and batteries that use XT60 connectors, such as high-quality LiPo batteries for quadcopters and related systems. No additional components are required for use.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eReverse polarity will permanently destroy connected chargers and controllers. Check the connectors for correct fit and orientation before connecting. The cable is intended exclusively for building prototypes and test setups.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x XT60 extension cable - male to female, 10 cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045681303901,"sku":"F23108940","price":2.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt60-verlaengerungskabel-maennlich-zu-weiblich-10-cm-funduino-5310448.jpg?v=1791492646"},{"product_id":"xt90-fassung-und-stecker-mit-lotfahne-male-und-female","title":"XT90 connector - plug and socket, 90 A, gold-plated","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlug-socket pair for high-current connections, each with one solder tab\u003c\/li\u003e \u003cli\u003eRated current up to 90 A\u003c\/li\u003e \u003cli\u003eGold-plated contacts for a secure, corrosion-resistant connection\u003c\/li\u003e \u003cli\u003eLow contact resistance thanks to precise contact geometry\u003c\/li\u003e \u003cli\u003ePolarization prevents incorrect polarity\u003c\/li\u003e \u003cli\u003eWide range of applications in drones, e-bikes, and robotic systems\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe XT90 connector is a high-current connection system consisting of a socket and plug, each with one solder tab for direct wiring to battery packs or power distributors. The pair is used where batteries or power sources need to be connected and disconnected frequently without risking wear to solder joints.\u003c\/p\u003e \u003cp\u003eThe gold-plated contacts provide a stable electrical connection and resist oxidation, while the polarized design prevents mix-ups. With a rated current of up to 90 A, the voltage drop is minimal due to the low contact resistance. This is crucial when high-performance battery packs are connected to power-hungry loads.\u003c\/p\u003e \u003cp\u003eSuch plug-socket systems are used as individual connections in small robotics projects or as multiple sets connected in parallel in e-bike drives, where the full current of several packs must be combined. The pair features standard brass surfaces and narrow solder tabs that can be integrated into circuit boards or wiring.\u003c\/p\u003e \u003cp\u003eSoldering tools and experience with high-current connections are required. The solder tabs must be secured without tension or mechanical stress during heating.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eHigh-current connections require faultless workmanship and secure fastening to prevent overheating and contact failure. This plug-socket pair is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in household electrical circuits. Work on or near electrical installations must be carried out by qualified electricians; if you are unsure about the current-carrying capacity or soldering procedure, consult a qualified electrician before commissioning.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045692903773,"sku":"F23108793","price":3.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt90-fassung-und-stecker-mit-loetfahne-male-und-female-funduino-5660945.jpg?v=1791493027"}],"url":"https:\/\/funduino.com\/en\/collections\/xt-system.oembed","provider":"Funduino","version":"1.0","type":"link"}