{"title":"Storage","description":null,"products":[{"product_id":"gehause-fur-raspberry-pi-2-b-weiss","title":"Case for Raspberry Pi 2 Model B - White, GPIO access","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eProtective case for Raspberry Pi 2 Model B in white\u003c\/li\u003e \u003cli\u003eProtects the circuit board and components from dirt and mechanical damage\u003c\/li\u003e \u003cli\u003eProvides unrestricted access to all ports and the GPIO header\u003c\/li\u003e \u003cli\u003eVentilation openings for heat dissipation\u003c\/li\u003e \u003cli\u003eEasy tool-free assembly\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe case protects the Raspberry Pi 2 Model B during operation and storage. It encloses the circuit board and sensitive components to protect them from dust, dirt, and accidental damage without obstructing access to essential interfaces.\u003c\/p\u003e \u003cp\u003eAll ports remain accessible; the USB ports, Ethernet jack, audio jack, and HDMI port fit into openings that ensure unrestricted access. The GPIO header on top remains uncovered for connecting sensors and other peripheral modules. Integrated ventilation openings enable air circulation around the CPU and other heat-generating components.\u003c\/p\u003e \u003cp\u003eThe case is suitable for stationary installations in laboratory setups, training projects, or private media centers where the computer runs for extended periods. The white finish blends discreetly into a variety of environments.\u003c\/p\u003e \u003cp\u003eThe case is supplied without mounting hardware; depending on the model, small rubber feet or plastic spacers may be required. Installation takes just a few minutes and requires no tools.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe case is intended exclusively to protect the Raspberry Pi 2 Model B during operation, testing, and development. It does not replace compliance with the usual electrical safety regulations when powering the system. The computer must be powered by a power supply suitable for this voltage class.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997709705565,"sku":"F23108402","price":2.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gehaeuse-fuer-raspberry-pi-2-b-weiss-funduino-8401240.jpg?v=1791497334"},{"product_id":"gehause-ohne-lufter-fur-raspberry-pi-3-schwarz","title":"Case for Raspberry Pi 3 - Plastic, black, without fan","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBlack plastic case for Raspberry Pi 3\u003c\/li\u003e \u003cli\u003ePassive cooling design without a fan\u003c\/li\u003e \u003cli\u003eAll ports remain accessible\u003c\/li\u003e \u003cli\u003eProtective contacts on critical components\u003c\/li\u003e \u003cli\u003eCompact, stackable design\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA plastic case for Raspberry Pi 3 protects the board from mechanical damage and dirt. The case operates without active cooling; heat is dissipated through the plastic walls, which means sufficient ambient air circulation is required. The passive approach eliminates power consumption and operating noise, but limits the range of use to moderate computing loads and room temperatures of up to approximately 25 °C.\u003c\/p\u003e \u003cp\u003eAll Raspberry Pi 3 ports remain accessible; Ethernet, USB ports, HDMI, audio, and GPIO headers are not covered. The case can be opened without removing the board from its protective enclosure. Protective contacts on the base prevent short circuits if the case is placed on conductive surfaces.\u003c\/p\u003e \u003cp\u003eThe case is suitable for stationary applications without continuous heavy loads, such as a media server, weather station, or home automation in a climate-controlled environment. Active cooling is required for 24\/7 streaming or continuous data processing under load. The compact black design takes up little space and can be placed on shelves or next to other devices.\u003c\/p\u003e \u003cp\u003eThe case is supplied without accessories; the power supply and SD card must be purchased separately. The Raspberry Pi 3 cannot reach its maximum computing performance without forced cooling, as the processor's thermal throttling takes effect more quickly than with active airflow.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThis case is intended exclusively for building prototypes and for testing and development purposes. Work on or near electrical installations is reserved for qualified electricians; if anything is unclear, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x fanless case for Raspberry Pi 3 - Black\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997709869405,"sku":"F23108436","price":2.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gehaeuse-ohne-luefter-fuer-raspberry-pi-3-schwarz-funduino-5837252.png?v=1791497330"},{"product_id":"argon-poly-abs-gehause-kompatibel-mit-raspberry-pi-4-schwarz","title":"Argon Poly+ case - ABS, black, for Raspberry Pi 4","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePrecisely manufactured ABS plastic case for single-board computers\u003c\/li\u003e \u003cli\u003eThree-part design with removable lid\u003c\/li\u003e \u003cli\u003eVentilation openings for heat dissipation\u003c\/li\u003e \u003cli\u003eAccessible cutouts for interfaces and connections\u003c\/li\u003e \u003cli\u003eFeet for elevation and vibration isolation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe Poly ABS case protects single-board computers from dust and mechanical impact while providing access to all interfaces and the GPIO header. The three-part plastic design can be disassembled and reassembled without tools.\u003c\/p\u003e \u003cp\u003eThe ABS plastic walls provide sufficient strength for mobile use and protection against contamination in workshops or prototyping environments. The integrated ventilation openings support natural convection, so the processor does not enter thermal protection mode even under continuous load. However, a separate heatsink or active cooling is advisable for more intensive applications with additional modules.\u003c\/p\u003e \u003cp\u003eThe case is suitable for stationary projects such as media servers, network storage, or automated sensor networks where the electronics must be protected from environmental influences while remaining easily accessible. It also provides sufficient isolation while maintaining serviceability for classroom use or workshops where multiple devices are operated side by side.\u003c\/p\u003e \u003cp\u003eA power supply is also required for operation. The fit is designed for the standard format; expansion modules connected via the GPIO header must fit inside the case or be mounted separately.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe case is intended exclusively for assembling prototypes and for testing and development purposes and is not intended for installation in the household power circuit. Work on the power supply must be carried out by qualified electricians; if anything is unclear, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Argon Poly+ ABS case, compatible with Raspberry Pi 4, black\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997800472925,"sku":"F23108905","price":7.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/argon-poly-abs-gehaeuse-kompatibel-mit-raspberry-pi-4-schwarz-funduino-6970042.jpg?v=1791497375"},{"product_id":"europlus-sortimentskasten-11-2-8-facher-transparent-sortierbox","title":"EuroPlus storage box - 2-8 compartments, 175 x 140 x 30 mm, transparent","description":"\u003cdiv\u003ePlastic organizer boxes with flexible compartment layout\u003c\/div\u003e \u003cdiv\u003eThe EuroPlus Basic 17 organizer boxes with their flexible dividers keep things organized and offer a wide range of uses in the workshop, household, or for hobbies.\u003c\/div\u003e \u003cdiv\u003e \u003ch4\u003e \u003c\/h4\u003e \u003cul\u003e \u003cli\u003eHighly impact-resistant polypropylene\u003c\/li\u003e \u003cli\u003eSecure organization: compartments close tightly with a transparent lid\u003c\/li\u003e \u003cli\u003eCustomizable layout with 6 flexible dividers\u003c\/li\u003e \u003cli\u003eHighly transparent: contents always clearly visible\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr title=\"BxTxH (mm)\"\u003e\n\u003cth\u003eExternal dimensions\u003c\/th\u003e \u003ctd\u003e175x140x30\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e \u003ctd\u003etransparent, yellow\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e \u003ctd\u003ePolypropylene\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eProduct name\u003c\/th\u003e \u003ctd\u003eOrganizer box with 6 flexible dividers\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eItem no.\u003c\/th\u003e \u003ctd\u003e457168\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eEAN\u003c\/th\u003e \u003ctd\u003e4005187571684\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cdiv\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e","brand":"Allit AG","offers":[{"title":"Default Title","offer_id":65997831143773,"sku":"AL-457168","price":2.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/europlus-sortimentskasten-112-8-faecher-transparent-sortierbox-funduino-2308861.jpg?v=1791493171"},{"product_id":"kunststoff-sortierbox-65mm-x-128mm-x-22mm","title":"Plastic sorting box - 128 x 65 x 22 mm, flat","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eFlat plastic box for storing small parts and electronic components\u003c\/li\u003e \u003cli\u003eDimensions 65 mm x 128 mm x 22 mm\u003c\/li\u003e \u003cli\u003eDurable plastic material\u003c\/li\u003e \u003cli\u003eSpace-saving in cabinets and on the workbench\u003c\/li\u003e \u003cli\u003eIdeal size for resistors, capacitors, and connectors\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis plastic sorting box is suitable for storing and organizing small parts in the workshop or during prototyping. The flat design, with dimensions of 65 * 128 * 22 millimeters, fits in any cabinet, under the work surface, or in shelf inserts without taking up much space. The material is break-resistant and protects the contents from dust and contamination.\u003c\/p\u003e \u003cp\u003eResistors, capacitors, diodes, and connectors can be stored compactly inside. Especially when working on several projects in parallel, such boxes help keep the desk clear, while components remain within reach when switching between setups without getting in the way. The size typically holds several hundred discrete components or around 20 to 30 modules such as sensor boards or circuit modules.\u003c\/p\u003e \u003cp\u003eFor storing semiconductors, a storage cabinet with antistatic properties is recommended; this box does not provide ESD protection. Anyone who frequently sorts components can stack several boxes on top of one another.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis box is intended exclusively for storing and keeping components and parts. It is not intended for use in electrical circuits and provides no protection against electrostatic discharge.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x  Plastic sorting box -  65mm x 128mm x 22mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997841138013,"sku":"F23106467","price":1.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kunststoff-sortierbox-65mm-x-128mm-x-22mm-funduino-5980727.png?v=1791493184"},{"product_id":"acryl-gehause-case-fur-arduino-mega-bausatz","title":"Acrylic Case for Arduino MEGA - Kit, transparent","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eProtective case for Arduino MEGA as a kit for assembly\u003c\/li\u003e \u003cli\u003eAcrylic plastic, transparent and opaque elements\u003c\/li\u003e \u003cli\u003eFour sides plus base and lid\u003c\/li\u003e \u003cli\u003eMounting holes for the microcontroller board and accessories\u003c\/li\u003e \u003cli\u003eEasy assembly without tools\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe acrylic case protects the Arduino MEGA from dust and damage during development and subsequent operation. The transparent side panels provide a view of the electronics and connected modules, while the lid made of opaque material covers the top. This keeps the board visible and accessible without leaving it exposed.\u003c\/p\u003e \u003cp\u003eThe kit consists of prefabricated acrylic parts that fit together without glue or tools. The individual components are simply inserted into or slid over one another until they are securely in place. Mounting holes also allow the Arduino MEGA to be securely mounted on the base plate and expansion modules or sensors to be fixed inside the case.\u003c\/p\u003e \u003cp\u003eThe case is suitable for stationary Arduino MEGA setups in the workshop, for school projects where multiple prototypes need to be arranged clearly, or for storing systems that are already operational. In all cases, the board remains protected from external influences, while the transparency of the side panels does not hinder troubleshooting by observing the LED status indicators.\u003c\/p\u003e \u003cp\u003eThe case is designed exclusively for the Arduino MEGA, with dimensions of approximately 102 by 53 millimeters. It is not suitable for other microcontroller boards. Installing the Arduino MEGA requires four small spacers or supports, which are not included.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe kit is intended exclusively for building prototypes and for testing and development purposes. It is not intended for installation in the household power circuit. Work on or near electrical installations must be carried out by a qualified electrician. If in doubt, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cp\u003eincluded.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997869973853,"sku":"F23107172","price":3.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/acryl-gehaeuse-case-fuer-arduino-mega-bausatz-funduino-9358233.jpg?v=1791493286"},{"product_id":"gehause-fur-calliope-mini-v3","title":"Case for Calliope mini V3 - protective box with USB access","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eProtective case for the Calliope mini V3 miniature microcontroller\u003c\/li\u003e \u003cli\u003eProtects the circuit board and connectors from damage and dirt\u003c\/li\u003e \u003cli\u003eProvides access to the USB port and battery holder without opening the case\u003c\/li\u003e \u003cli\u003eTransparent or colored version depending on the variant\u003c\/li\u003e \u003cli\u003eEasy assembly without additional tools\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe case protects the Calliope mini V3 from mechanical impact, moisture, and dirt during school projects and recreational electronics projects. The box fully encloses the circuit board while keeping the USB port and battery holder accessible.\u003c\/p\u003e \u003cp\u003eThe design allows the power supply to be changed quickly and is optimized for connecting sensors or actuators to the contact pins. Quick access to programs is not obstructed by the openings for the USB port.\u003c\/p\u003e \u003cp\u003eThe case is suitable for robotics projects at school, for measurements in more humid environments such as gardens or basements, and for portable prototypes where scratches and wear should be avoided. The transparent or colored variant also allows visual identification by project or student.\u003c\/p\u003e \u003cp\u003eThe case is not required to operate the Calliope mini V3 itself; it is an optional protective measure. All external connectors remain accessible.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe case is intended exclusively to protect the Calliope mini V3 during testing and development. It does not protect against electric shock and does not replace safety measures when handling power supplies. The case should no longer be used if it is damaged or cracked.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x case for Calliope mini V3 (color variant subject to availability - For quantities of 8 or more, individual color requests and combinations can be requested by email)\u003c\/li\u003e \u003cli\u003e2x screws for optional fixation\u003c\/li\u003e \u003cli\u003e4x rubber bands for quick assembly\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997947666781,"sku":"F23110290","price":10.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gehaeuse-fuer-calliope-mini-v3-funduino-5651629.png?v=1791495565"},{"product_id":"smd-sortierbox-75-30-21-5mm-grun-erweiterbar","title":"SMD sorting box - 5 compartments, 75 x 30 x 21 mm, green","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSorting box for SMD components, modularly expandable\u003c\/li\u003e \u003cli\u003eDimensions 75 * 30 * 21 mm\u003c\/li\u003e \u003cli\u003eFive separate compartments with lids\u003c\/li\u003e \u003cli\u003eGreen plastic housing\u003c\/li\u003e \u003cli\u003eLids with writable labels\u003c\/li\u003e \u003cli\u003eCompatible with additional boxes from the same system\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis sorting box stores SMD components separately by type, size or project. The compact plastic housing with five independent compartments and individual lids protects small components from dirt and mix-ups. Each compartment is sealed separately, keeping components protected even when stored next to one another.\u003c\/p\u003e \u003cp\u003eThe modular system allows multiple boxes to be stacked on top of or next to one another, making it easy to organize a larger inventory. The writable labels on the lids enable quick identification of which components are stored in each compartment. This keeps a growing parts library organized without requiring each compartment to be opened individually.\u003c\/p\u003e \u003cp\u003eSuitable for electronics enthusiasts at home, in workshops and at workbenches where various SMD components are frequently used. The system also works for other small parts such as through-hole resistors, diodes or smaller capacitors.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis sorting box is intended for storing components and requires no special safety precautions during use. The plastic housings can be cleaned with a damp cloth if necessary.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x\u0026nbsp;sorting box 75 x 30 x 21.5 mm, green, expandable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997949534557,"sku":"F23107349","price":1.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/smd-sortierbox-7530215mm-gruen-erweiterbar-funduino-4219999.png?v=1791495565"},{"product_id":"transparentes-kunststoffgehause-fur-arduino-mega","title":"Plastic enclosure for Arduino MEGA - transparent","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTransparent plastic enclosure for Arduino MEGA\u003c\/li\u003e \u003cli\u003eProtects the circuit board and components from damage and dirt\u003c\/li\u003e \u003cli\u003eProvides a full view of components and LEDs during operation\u003c\/li\u003e \u003cli\u003eEasy tool-free assembly\u003c\/li\u003e \u003cli\u003eImproved protection against electrostatic discharge\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe enclosure protects the Arduino MEGA board while keeping the system’s operation fully visible. The transparent plastic construction protects the circuit board from dirt, accidental short circuits, and mechanical damage during laboratory use or in test setups.\u003c\/p\u003e \u003cp\u003eThe transparent material allows LEDs, components, and signal lines to be observed during operation without having to open the enclosure. This makes troubleshooting and following program sequences considerably easier.\u003c\/p\u003e \u003cp\u003eThe enclosure is suitable for learning projects that focus on understanding electronic functions, as well as for rapid prototypes and demonstrations. It is particularly useful in dusty environments or for school and university projects where the hardware is handled frequently.\u003c\/p\u003e \u003cp\u003eThe tool-free assembly saves time during setup. The enclosure is intended exclusively for building prototypes and for testing and development purposes and does not provide protection for continuous operation at mains voltage.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe enclosure is not intended for installation in the household electrical system. It is intended exclusively for building prototypes and for testing and development purposes. When working on or near electrical installations, or if you are unsure about the power supply, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Transparent plastic enclosure for Arduino MEGA\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998149353821,"sku":"F23105898","price":3.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/transparentes-kunststoffgehaeuse-fuer-arduino-mega-funduino-2186118.png?v=1791495309"},{"product_id":"kunststoff-sortierbox-165-235-60mm","title":"Plastic sorting box - 165 x 235 x 60 mm, with dividers","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlastic sorting box for small parts and components\u003c\/li\u003e \u003cli\u003eInternal dimensions 165 * 235 * 60 mm\u003c\/li\u003e \u003cli\u003eFlexibly divisible with removable dividers\u003c\/li\u003e \u003cli\u003eStackable thanks to its flat design\u003c\/li\u003e \u003cli\u003eTransparent lid for checking the contents without opening\u003c\/li\u003e \u003cli\u003eShatterproof polypropylene\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis plastic sorting box provides space for the organized storage of electronic components, fastening parts, and other small items. The internal dimensions of 165 * 235 * 60 mm enable compact storage on a workbench or shelf.\u003c\/p\u003e \u003cp\u003eThe removable dividers can be arranged flexibly to sort a wide variety of part sizes. The transparent lid allows you to check the contents quickly without having to open the box. The polypropylene material withstands everyday handling and can also withstand impacts.\u003c\/p\u003e \u003cp\u003eSeveral boxes can be stacked on top of one another to save space. This allows the storage capacity to grow vertically without taking up valuable workspace.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe box is not suitable for storing flammable, toxic, or corrosive substances. It is intended for storing small parts under normal indoor conditions.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* Plastic sorting box - 165 * 235 * 60mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998299103581,"sku":"F23105214","price":4.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kunststoff-sortierbox-165-235-60mm-funduino-4384660.png?v=1791496451"},{"product_id":"transparentes-kunststoffgehause-fur-arduino-uno","title":"Protective case for Arduino UNO - transparent, snap closure","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTransparent plastic enclosure for Arduino UNO\u003c\/li\u003e \u003cli\u003eProtects the board from dirt and mechanical damage\u003c\/li\u003e \u003cli\u003eAllows visual inspection of the LED indicators and connector connections\u003c\/li\u003e \u003cli\u003eEasy tool-free assembly\u003c\/li\u003e \u003cli\u003eEnsures air circulation through its open design\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe transparent plastic enclosure protects an Arduino UNO board from dust and accidental damage during development without obstructing the view of the board. The transparent design allows you to monitor the status of the onboard LED indicators and see the current connections at any time.\u003c\/p\u003e \u003cp\u003eThe enclosure's open design ensures sufficient air circulation and heat dissipation, preventing the board from overheating even during extended periods of operation. The plastic material is resistant to the common chemicals and solvents found in workshop environments.\u003c\/p\u003e \u003cp\u003eThe enclosure can be assembled and disassembled without tools, allowing the board to be removed quickly when needed. Typical applications include stationary experimental setups, mobile robot prototypes, training projects, and demonstration scenarios in which the board needs to be protected while remaining visible.\u003c\/p\u003e \u003cp\u003eAccess to the USB port and power connection remains unrestricted. The enclosure is not required for operation of the board itself and has no effect on its power supply or functionality.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe enclosure is intended exclusively to protect prototypes in laboratory, training, and testing environments. It is not intended for use in household electrical circuits or electrical installations. Work on or near electrical installations must be carried out by qualified electricians; if you are unsure about safe commissioning, consult a qualified electrician before operation.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* Transparent plastic enclosure for Arduino UNO\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998368866653,"sku":"F23105896","price":1.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/transparentes-kunststoffgehaeuse-fuer-arduino-uno-funduino-9158604.png?v=1791496483"},{"product_id":"kunststoff-sortierkoffer-390-284-60mm","title":"Plastic organizer case - 390 x 284 x 60 mm, dividers","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCase made from a particularly durable polymer blend\u003c\/li\u003e \u003cli\u003ewith ergonomic handle\u003c\/li\u003e \u003cli\u003ewith transparent lid\u003c\/li\u003e \u003cli\u003ewith functional, individually configurable dividers\u003c\/li\u003e \u003cli\u003ewith sturdy snap locks\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1* plastic sorting case - 390 * 284 * 60mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998412579165,"sku":"FUN-1010499","price":7.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kunststoff-sortierkoffer-390-284-60mm-funduino-4006152.jpg?v=1791496542"},{"product_id":"transparent-magnetic-acrylic-display-cabinet-27-22-18mm","title":"Acrylic display case - transparent, 27 x 22 x 18 cm, magnetic closure","description":"\u003cp\u003eWhether it’s a 3D print, finished electronics project, model car, or collectible: this transparent acrylic display case really showcases your favorite piece while protecting it from dust and fingerprints. The clear acrylic provides an unobstructed view from all sides.\u003c\/p\u003e \u003cp\u003eThe clever feature is the magnetic connection of the front opening, allowing you to quickly redecorate the contents. The box can be opened and closed quickly. The acrylic panels are held together by integrated magnets. You can assemble the display case in just a few steps without tools or glue and disassemble it flat just as quickly, for example, for transport or space-saving storage.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHighlights\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTransparent acrylic for an unobstructed view from all sides\u003c\/li\u003e \u003cli\u003eMagnetic connection of the front flap: opens without tools or glue\u003c\/li\u003e \u003cli\u003eProtects models and collectibles from dust and fingerprints\u003c\/li\u003e \u003cli\u003eCan be disassembled flat without tools for space-saving storage and transport\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePresentation of 3D prints, kits, and maker projects\u003cbr\u003eDisplay case for student work at school and in makerspaces\u003cbr\u003eCollectibles such as figurines, model cars, or minerals\u003cbr\u003eProduct presentation at trade shows, on shelves, or on the sales floor\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eScope of delivery\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e1x acrylic display case 27 x 22 x 18 cm (acrylic panels with magnetic connection, for self-assembly)\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCare instructions\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eClean acrylic surfaces only with a soft, clean cloth; do not use abrasive or solvent-based cleaners\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMaterial: Acrylic, transparent\u003cbr\u003eConnection: Magnetic, tool-free assembly\u003cbr\u003eAssembled dimensions (L x W x H): 27 x 22 x 18 cm\u003cbr\u003eWeight: 0.71 kg\u003cbr\u003ePackaging dimensions (L x W x H): 30 x 25 x 4 cm\u003cbr\u003eDelivery condition: Flat-packed, for self-assembly\u003c\/p\u003e \u003cp\u003e\u003cbr\u003eTransparent acrylic display case with magnetic closure 27x22x18 cm\u003c\/p\u003e \u003cp\u003eTransparent acrylic display case with magnetic closure: present 3D prints, models, and collectibles dust-free. Tool-free assembly, 27 x 22 x 18 cm.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAdvantages\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eTool-free assembly\u003cbr\u003eUnobstructed view from all sides\u003cbr\u003eProtects against dust\u003cbr\u003eCan be disassembled flat and stored compactly\u003cbr\u003e27 x 22 x 18 cm\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66042697449821,"sku":"F25111069","price":100.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/3639-F25111069_01.jpg?v=1791497947"},{"product_id":"raspberry-pi-2b-gehause-transparent-oval","title":"Case for Raspberry Pi 2B - transparent, oval","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTransparent case for Raspberry Pi 2B\u003c\/li\u003e \u003cli\u003eOval shape with a clear view of the electronics\u003c\/li\u003e \u003cli\u003eProtective enclosure for the board\u003c\/li\u003e \u003cli\u003eTool-free assembly possible\u003c\/li\u003e \u003cli\u003eVentilation openings for the components remain accessible\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe transparent case provides a clear view of the circuit board and all components of the Raspberry Pi 2B. The oval shape offers a practical grip while keeping the board securely in position.\u003c\/p\u003e \u003cp\u003eBecause the case leaves all ports and connectors along the edges accessible, the USB ports, network socket, audio jack, and GPIO header continue to function unchanged. Assembly requires no additional fastening materials.\u003c\/p\u003e \u003cp\u003eThe case protects against dust and mechanical damage during everyday project use, while the strategically placed ventilation openings ensure adequate heat dissipation from the processor and voltage regulators. It is suitable for stationary systems such as media servers, home automation, or data acquisition projects where the circuit should remain visible.\u003c\/p\u003e \u003cp\u003eA Raspberry Pi 2B must already be available for use.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe case protects the board from dust and splashing water in normal surroundings, but does not protect against direct contact with water or extreme environmental conditions. It is intended exclusively for testing and development purposes. Consult a qualified electrician when working on the power supply or the board itself.\u003c\/p\u003e \u003ch4\u003ePackage Contents\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x case for Raspberry Pi 2B+, transparent, oval\u003c\/li\u003e \u003cli\u003eRaspberry Pi 2B+ not included!\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66042934755677,"sku":"F23108841","price":1.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/4597-F23108841_01.jpg?v=1791483221"},{"product_id":"allit-aluplus-box-s-70","title":"Allit AluPlus Box S 70 - aluminum transport box, stackable","description":"\u003ch2 class=\"PDq2pG_selectionAnchorContainer\" data-start=\"45\" data-end=\"118\"\u003e\u003cstrong\u003eAluminium transport box for safe storage and protected transport\u003c\/strong\u003e\u003c\/h2\u003e \u003cp data-start=\"120\" data-end=\"402\"\u003eThe AluPlus Box ›S‹ 70 is a sturdy aluminium transport box for storage, transport and protected storage. The lightweight, robust housing with spring-loaded folding handles, tension-lever catches and reinforced base is suitable for workshops, warehouses, vehicles, hobbies and mobile applications.\u003c\/p\u003e \u003ch3 data-start=\"404\" data-end=\"414\"\u003e\u003cstrong\u003eHighlights\u003c\/strong\u003e\u003c\/h3\u003e \u003cul data-start=\"416\" data-end=\"837\"\u003e \u003cli data-section-id=\"5y91ht\" data-start=\"416\" data-end=\"464\"\u003eTop-quality, sturdy aluminium transport box\u003c\/li\u003e \u003cli data-section-id=\"12mvnrc\" data-start=\"465\" data-end=\"496\"\u003eLightweight and robust housing\u003c\/li\u003e \u003cli data-section-id=\"p56o59\" data-start=\"497\" data-end=\"517\"\u003eStackable rim\u003c\/li\u003e \u003cli data-section-id=\"4f8j0e\" data-start=\"518\" data-end=\"561\"\u003eSpring-loaded folding handles for comfortable handling\u003c\/li\u003e \u003cli data-section-id=\"s8y9va\" data-start=\"562\" data-end=\"585\"\u003eTension-lever catches\u003c\/li\u003e \u003cli data-section-id=\"15sku37\" data-start=\"586\" data-end=\"669\"\u003eCatches with holes for cylinder locks, padlocks or seal closures\u003c\/li\u003e \u003cli data-section-id=\"14hkrmd\" data-start=\"670\" data-end=\"707\"\u003eTemperature- and weather-resistant\u003c\/li\u003e \u003cli data-section-id=\"g6j9jn\" data-start=\"708\" data-end=\"724\"\u003eCorrosion-free\u003c\/li\u003e \u003cli data-section-id=\"5taoub\" data-start=\"725\" data-end=\"748\"\u003eSplash-proof\u003c\/li\u003e \u003cli data-section-id=\"hetmsr\" data-start=\"749\" data-end=\"795\"\u003eReinforced base for additional stability\u003c\/li\u003e \u003cli data-section-id=\"1y4w4mu\" data-start=\"796\" data-end=\"837\"\u003eGood quality-to-price ratio\u003c\/li\u003e \u003c\/ul\u003e \u003ch3 data-start=\"839\" data-end=\"863\"\u003eBenefits \/ areas of use\u003c\/h3\u003e \u003cp data-start=\"865\" data-end=\"1238\"\u003eThe AluPlus Box ›S‹ 70 is suitable for safely transporting and neatly storing tools, equipment, accessories, spare parts or personal gear. Thanks to its aluminium housing, splash-proof design and reinforced base, it is suitable for use in workshops, warehouses, vehicles, service areas and mobile applications.\u003c\/p\u003e \u003ch3 data-start=\"1240\" data-end=\"1256\"\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/h3\u003e \u003cp data-start=\"1258\" data-end=\"1689\"\u003eProduct: AluPlus Box ›S‹ 70\u003cbr data-start=\"1285\" data-end=\"1288\"\u003e Product description: Top-quality aluminium transport box\u003cbr data-start=\"1340\" data-end=\"1343\"\u003e Item no.: 420004\u003cbr data-start=\"1358\" data-end=\"1361\"\u003e EAN: 4005187200041\u003cbr data-start=\"1379\" data-end=\"1382\"\u003e External dimensions: 400 × 595 × 375 mm\u003cbr data-start=\"1411\" data-end=\"1414\"\u003e Usable dimensions: 345 × 550 × 355 mm\u003cbr data-start=\"1442\" data-end=\"1445\"\u003e Colour: Silver\u003cbr data-start=\"1458\" data-end=\"1461\"\u003e Material: Aluminium\u003cbr data-start=\"1480\" data-end=\"1483\"\u003e Wall thickness: 0.8 mm\u003cbr data-start=\"1500\" data-end=\"1503\"\u003e Design: Stackable rim, spring-loaded folding handles, tension-lever catches\u003cbr data-start=\"1573\" data-end=\"1576\"\u003e Base: Reinforced\u003cbr data-start=\"1592\" data-end=\"1595\"\u003e Features: Temperature-resistant, weather-resistant, corrosion-free, splash-proof\u003c\/p\u003e \u003ch3 data-start=\"1691\" data-end=\"1703\"\u003e\u003cstrong\u003eScope of delivery\u003c\/strong\u003e\u003c\/h3\u003e \u003cul data-start=\"1705\" data-end=\"1728\"\u003e \u003cli data-section-id=\"w49ysh\" data-start=\"1705\" data-end=\"1728\"\u003e1x AluPlus Box ›S‹ 70\u003c\/li\u003e \u003c\/ul\u003e","brand":"Allit AG","offers":[{"title":"Default Title","offer_id":66042946945373,"sku":"F25111324","price":90.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/allit-aluplus-box-s-70-funduino-9529762.jpg?v=1791482703"},{"product_id":"europlus-metall-kleinteilekoffer-pro-m-44l-23-sortierbox","title":"Allit EuroPlus Small Parts Case Pro M 44L-23 - Metal","description":"","brand":"Allit AG","offers":[{"title":"Default Title","offer_id":66042951106909,"sku":"AL-454120","price":34.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/europlus-metall-kleinteilekoffer-pro-m-44l-23-sortierbox-funduino-1892660.jpg?v=1791484555"},{"product_id":"europlus-pro-k-44-36-profi-kleinteilekoffer-mit-clips","title":"Allit EuroPlus Pro K44\/36 Small Parts Case - with Clips","description":"","brand":"Allit AG","offers":[{"title":"Default Title","offer_id":66042951172445,"sku":"AL-454250","price":24.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/europlus-pro-k4436-profi-kleinteilekoffer-mit-clips-funduino-3597487.jpg?v=1791484556"},{"product_id":"kuhlkorper-gehause-2w01-fur-raspberry-pi-zero-zero-w-zero-2w","title":"2W01 enclosure with heatsink - aluminum, for Raspberry Pi Zero","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAluminum case with integrated heatsink for Raspberry Pi Zero\u003c\/li\u003e \u003cli\u003ePassively cooled design without a fan\u003c\/li\u003e \u003cli\u003eImproves heat transfer from the SoC to the surroundings\u003c\/li\u003e \u003cli\u003eProtection against mechanical damage\u003c\/li\u003e \u003cli\u003eStackable and space-saving\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe case combines protection and cooling for the Raspberry Pi Zero. The integrated aluminum heatsink dissipates heat directly from the processor without requiring a fan. This enables stable operation under load without additional power consumption or audible operating noise.\u003c\/p\u003e \u003cp\u003ePassive cooling prevents thermal throttling in typical project applications. The design is particularly suitable for scenarios involving continuous or recurring CPU load, such as collecting sensor data or performing light processing tasks. In air-conditioned indoor environments with ambient temperatures below 25 °C, the module operates reliably even under higher loads.\u003c\/p\u003e \u003cp\u003eThe case protects the board from dust, moisture, and accidental short circuits. Its design allows multiple units to be arranged in a row, minimizing space requirements and enabling flexible placement. USB, GPIO, and other standard connectors remain accessible without adapters.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe case is intended exclusively for prototype assembly, testing, and development purposes. The Raspberry Pi Zero requires a separate power supply via a USB Micro connector; the correct polarity and current rating must be observed. If you are unsure about the power supply or connecting the board, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x metal case\u003c\/li\u003e \u003cli\u003e4x screws\u003c\/li\u003e \u003cli\u003e1x adhesive pad\u003c\/li\u003e \u003cli\u003e1x pin header\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66042956382557,"sku":"F23107553","price":7.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kuehlkoerper-gehaeuse-2w01-fuer-raspberry-pi-zero-zero-w-zero-2w-funduino-5733458.jpg?v=1791487197"},{"product_id":"gehause-inkl-lufter-fur-raspberry-pi-4-3b-3b-2b-stapelbar-3-ebenen","title":"Raspberry Pi case - with fan, stackable, 3 levels","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlastic case for Raspberry Pi models 2B, 3B, 3B+ and 4\u003c\/li\u003e \u003cli\u003eIntegrated fan provides active CPU cooling\u003c\/li\u003e \u003cli\u003eOpenings for the GPIO header, camera and display connectors\u003c\/li\u003e \u003cli\u003eTool-free assembly using plug connections\u003c\/li\u003e \u003cli\u003eThermal pads for heat transfer to the case\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe case with an integrated fan provides protection and heat management for Raspberry Pi single-board computers. The fan connects directly to the board's GPIO pins and cools by convection, helping to prevent thermal throttling even under load, which is particularly important during full CPU utilization over extended periods.\u003c\/p\u003e \u003cp\u003eThanks to the open design areas, all relevant connectors remain accessible, including the USB ports, network socket, HDMI, audio jack and GPIO header. Camera and display ribbons can also be inserted with the case mounted. The thermal pads on the inside additionally provide a direct heat path from the CPU to the case.\u003c\/p\u003e \u003cp\u003eTypical applications include continuous operation as a media server or network storage device, where continuous CPU usage occurs, as well as camera systems with image processing or environmental monitoring with multiple active sensors. The ventilation also contributes to reliable operating temperatures in compact case assemblies with limited air space.\u003c\/p\u003e \u003cp\u003eThe case fits the models listed above; compatibility between model variants should be checked before purchase, as the boards have different dimensions. Fan operation requires a suitable GPIO power limit or PWM signal; simple continuous operation via the pins requires planning at the operating system level.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe case is intended exclusively for assembling development systems, prototypes, and test and demonstration setups. It is not suitable for integration into mains-voltage devices or systems with a direct connection to household electrical circuits. If you are unsure about the power supply or fan connection, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x case incl. fan for Raspberry Pi 4, 3B+, 3B, 2B - stackable, 3 levels\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66043656929629,"sku":"F23106085","price":24.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gehaeuse-inkl-luefter-fuer-raspberry-pi-4-3b-3b-2b-stapelbar-3-ebenen-funduino-7103835.jpg?v=1791484035"},{"product_id":"ice-tower-cpu-lufter-fur-raspberry-pi-4-rgb-beleuchtet","title":"ICE Tower CPU Cooler for Raspberry Pi 4 - RGB, 40 mm Fan, 5 V","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCPU cooler for Raspberry Pi 4 with RGB LED lighting\u003c\/li\u003e \u003cli\u003eActive cooling for the Broadcom processor\u003c\/li\u003e \u003cli\u003eAluminum heatsink with 40-mm fan\u003c\/li\u003e \u003cli\u003e5 V operating voltage via GPIO pin\u003c\/li\u003e \u003cli\u003eRGB LEDs freely programmable via data line\u003c\/li\u003e \u003cli\u003eThermal paste included for installation\u003c\/li\u003e \u003cli\u003eScrew and plug-in installation without soldering\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA CPU cooler for the single-board computer significantly reduces the processor temperature under load. The aluminum housing dissipates heat from the Broadcom chip, while the 40-millimeter fan generates a constant airflow. The RGB LEDs in the cooling fin can be controlled via a digital data line and illuminate as desired or automatically as a temperature indicator.\u003c\/p\u003e \u003cp\u003eThe heatsink is attached directly to the processor using the included thermal paste. Installation options include plug-in mounting via the GPIO header or a screw connection to the housing. The fan draws its 5-volt power supply from the GPIO connector, so no additional cable is required. RGB LED control uses one GPIO pin for digital signals.\u003c\/p\u003e \u003cp\u003eCooling is useful wherever the Raspberry Pi 4 performs sustained tasks, requires significant computing power, or is operated in higher temperatures. Examples include long-term measurement data acquisition, demanding image processing, or continuous operation as a network server. Without active cooling, the processor throttles its clock frequency as soon as a threshold is exceeded to protect itself. The cooler significantly prevents or delays this throttling.\u003c\/p\u003e \u003cp\u003eA Raspberry Pi 4 is required for operation. RGB LED control requires a Python script or similar software, as the colors do not light up without programming. The heatsink does not fit next to large-volume HAT modules; the height should be measured beforehand when using space-saving add-ons.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe device is not intended for connection to the household power supply and is exclusively intended for use in prototyping, testing, and development projects. Care must be taken when applying the thermal paste and attaching the cooler to the processor to avoid contaminating other components. If you have questions about correct installation, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x ICE Tower CPU fan for Raspberry Pi 4, RGB illuminated\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66043968717149,"sku":"F23109124","price":22.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/ice-tower-cpu-luefter-fuer-raspberry-pi-4-rgb-beleuchtet-funduino-7651656.jpg?v=1791486887"},{"product_id":"grove-wrapper-1x1-blau-4-stuck","title":"Grove Wrapper 1x1 - module housing, 4 pieces, blue","description":"\u003ch2\u003eGrove - Wrapper for electronic building-block projects\u003c\/h2\u003e \u003cp\u003eGet ready for your electronic building-block project! Grove's Wrapper design uses a semi-open space that does not cause interference when using Grove modules. It is compatible with LEGO and Makeblock modules and protects your project.\u003c\/p\u003e \u003cp\u003eGrove Wrappers are mainly used to protect or repair Grove modules. Since they are designed as a semi-open space, there are no interruptions when using Grove modules. This saves you a lot of work fine-tuning modules, and you can easily present your projects. The mechanical design of the Grove Wrapper also makes assembling and disassembling the modules easier. \u003c\/p\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCreate an electronic building-block project: Provides colorful cases and enables interconnection like LEGO modules.\u003c\/li\u003e \u003cli\u003eHigh compatibility: Compatible with LEGO and Makeblock modules, making your project customizable and interesting.\u003c\/li\u003e \u003cli\u003eEasy to use\/replace: Flexible mounting mechanism for convenient installation and replacement of Grove modules.\u003c\/li\u003e \u003cli\u003eSafety: The semi-open space prevents interference when using Grove modules. Always ensure the safety of your project.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003ctable style=\"height: 88px; width: 305px;\"\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: small;\"\u003eDimension (large)\u003c\/span\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cspan style=\"font-size: small;\"\u003e50 × 25 × 13 mm\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: small;\"\u003ePlane Dimension (small)\u003c\/span\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cspan style=\"font-size: small;\"\u003e25 × 25 × 13 mm\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: small;\"\u003eMaterial\u003c\/span\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cspan style=\"font-size: small;\"\u003eABS\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: small;\"\u003eColor\u003c\/span\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cspan style=\"font-size: small;\"\u003eBlue\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003eTechnical details\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePackaging: 80 mm x 80 mm x 16 mm\u003c\/li\u003e \u003cli\u003eWeight: 17 g\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eWhat is Grove?\u003c\/h3\u003e \u003cp\u003eGrove makes connecting and experimenting easier and simplifies the prototyping process. No jumpers or soldering are required. More than 300 Grove modules have been developed, covering a wide range of applications and meeting a variety of requirements. Not only the hardware but also the software is open source. We offer various Grove Shields to enable connections to the Grove system with a range of microcontrollers. \u003c\/p\u003e \u003ch3\u003eParts list\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGrove - Blue Wrapper 1x1: 4 pieces\u003c\/li\u003e \u003cli\u003eScrew Set\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Seeedstudio","offers":[{"title":"Default Title","offer_id":66044197372253,"sku":"F23106081","price":1.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/grove-wrapper-1x1-blau-4-stueck-funduino-1321399.jpg?v=1791488378"},{"product_id":"gehause-fur-raspberry-pi-3-und-3b-aluminium","title":"Case for Raspberry Pi 3 and 3B+ - aluminum, passive cooling","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAluminum protective enclosure for Raspberry Pi models 3 and 3B\u003c\/li\u003e \u003cli\u003eHeat dissipation through the metal construction without additional cooling\u003c\/li\u003e \u003cli\u003eDimensions designed for tool-free assembly\u003c\/li\u003e \u003cli\u003eUSB, HDMI, and other interfaces remain accessible\u003c\/li\u003e \u003cli\u003eRobust construction for continuous operation in development and hobby environments\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe aluminum enclosure protects Raspberry Pi 3 and 3B single-board computers from damage, dust, and unintended contact. The metal construction uses aluminum's thermal conductivity to dissipate heat directly, without requiring a separate heatsink. This eliminates an additional component and keeps the space required manageable.\u003c\/p\u003e \u003cp\u003eAssembly is tool-free: the board is inserted into the enclosure from the side and fits securely. All necessary openings for USB ports, HDMI sockets, and the Micro-SD card slot are pre-cut, so no further modification is required. The GPIO header also remains accessible for external sensors and switching modules.\u003c\/p\u003e \u003cp\u003eApplications include weather stations with continuous data collection, home automation control units operating continuously, control modules for small workshop machines, or simply hobby projects that remain at a workstation for extended periods. Wherever electronics need to be protected from contamination while the necessary interfaces must remain accessible, the enclosure provides reliable service.\u003c\/p\u003e \u003cp\u003eCompatibility is limited to Raspberry Pi 3 and 3B; newer versions do not fit. Operation requires a power supply providing at least 2.5 A via a Micro-USB connection, which must be purchased separately.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe enclosure is intended exclusively for assembling prototypes and for testing and development purposes; it is not suitable for installation in the household electrical circuit. When used with live external modules or connected directly to the mains, work must be carried out by a qualified electrician. If anything is unclear, please contact a qualified electrician before commissioning.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66044531245405,"sku":"F23108833","price":10.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gehaeuse-fuer-raspberry-pi-3-und-3b-aluminium-funduino-4823500.jpg?v=1791488096"},{"product_id":"grove-wrapper-1x1-rot-4-stuck","title":"Grove Wrapper 1x1 - red protective case, 4 pieces, ABS","description":"\u003ch2\u003eGrove - Wrapper\u003c\/h2\u003e \u003cp\u003eGrove - Wrappers are a type of housing for securing and protecting Grove modules. The semi-open space prevents interference when using Grove modules. It makes projects easier to present and enables clear scenes.\u003c\/p\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBuild electronic snap-together projects with colorful housings\u003c\/li\u003e \u003cli\u003eCompatibility with Lego and Makeblock modules\u003c\/li\u003e \u003cli\u003eEasy to use\/swap with Flex mounting\u003c\/li\u003e \u003cli\u003eSafety through the semi-open space when using Grove modules\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eExpanding Lego bricks and Makeblock\u003c\/li\u003e \u003cli\u003ePresentation\u003c\/li\u003e \u003cli\u003eProtective cover\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eDimensions (large):\u003c\/strong\u003e 50 × 25 × 13 mm\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDimensions (small):\u003c\/strong\u003e 25 × 25 × 13 mm\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ABS\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePackage contents\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e4x Grove - Red Wrapper 1x1\u003c\/li\u003e \u003cli\u003eScrew set\u003c\/li\u003e \u003c\/ul\u003e","brand":"Seeedstudio","offers":[{"title":"Default Title","offer_id":66044532490589,"sku":"F23109317","price":1.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/grove-wrapper-1x1-rot-4-stueck-funduino-4900209.jpg?v=1791488896"},{"product_id":"gehause-mit-lufter-fur-raspbery-pi-2-und-b","title":"Aluminum case for Raspberry Pi 2 and B+ - with fan, 5 V","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAluminum case with integrated fan for single-board computers\u003c\/li\u003e \u003cli\u003eMatching port layout for two specific older generations\u003c\/li\u003e \u003cli\u003eFan with 5 V DC connection\u003c\/li\u003e \u003cli\u003eHeat dissipation through the metal body and active convection\u003c\/li\u003e \u003cli\u003eTool-free assembly using four corner screws\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis aluminum case with an integrated fan provides protection and thermal management for older single-board computers. The fan connects directly to the board’s 5 V power supply and runs continuously as soon as the system starts. Heat conduction through the metal case and air circulation prevent reduced computing performance due to thermal overload.\u003c\/p\u003e \u003cp\u003eThe case precisely follows the port layout of these generations, keeping the most important connections accessible. Some inputs and outputs are routed through the case walls, while others remain freely accessible from the top. Assembly takes just a few minutes without special tools.\u003c\/p\u003e \u003cp\u003eThe system is suitable for continuous operation as a network server in the living room, as a control computer for home automation, or as a basis for measurement data acquisition when the processor needs to run under load for extended periods. Passive heat conduction alone is not sufficient under higher loads; the fan ensures consistent operating conditions.\u003c\/p\u003e \u003cp\u003eOperation requires an air humidity level below 85 percent. Specialized network accessories or additional heat sinks are not required. Fan noise remains in the background during normal operation; modifications to the system require opening the case afterward.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis product is intended exclusively for building prototypes and for testing and development purposes and is not intended for use in consumer devices. The fan can build up an electrostatic charge and should be briefly touched before installation to prevent discharges to sensitive board components. Work on or near the power supply must be carried out by qualified electricians.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66044551430493,"sku":"F23108839","price":5.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gehaeuse-mit-luefter-fuer-raspbery-pi-2-und-b-funduino-2907746.jpg?v=1791488093"},{"product_id":"nespi-gehause-fur-raspberry-pi-nintendo-nes","title":"NESPI case for Raspberry Pi B+ - 2B, 3B, retro console design","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eRaspberry Pi case in the form of a Nintendo NES console\u003c\/li\u003e \u003cli\u003eFits Raspberry Pi Model B+, 2B, and 3B\u003c\/li\u003e \u003cli\u003eIntegrated button block for Start and Select\u003c\/li\u003e \u003cli\u003eRear GPIO panel available for expansion modules\u003c\/li\u003e \u003cli\u003eOpening in the lid for a full-size heatsink\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe case transforms a Raspberry Pi into the iconic shape of a Nintendo NES console. It retains the original's basic dimensions and proportions, but can be opened to keep the single-board computer hardware accessible and replaceable if needed.\u003c\/p\u003e \u003cp\u003eThe button block on top sits directly on the Raspberry Pi's GPIO pins and provides two mechanical buttons for Start and Select. They can be programmed for individually defined functions, such as restarting the system or initiating custom application logic. This eliminates the need for a separate control panel for basic operation.\u003c\/p\u003e \u003cp\u003eThe case fits the Raspberry Pi 3B, Pi 2B, and Model B+. The opening in the lid accommodates originally mounted heatsinks up to approximately 30 millimeters in height without restricting airflow during operation. If you prefer a different cooling system, you will need to measure it. An optional rear-facing GPIO panel can be attached so that sensors, relays, or motors can remain connected via pin headers without opening the case. This turns the eighties classic into a compact control center suitable for home automation, retro game emulation, or network monitoring, while providing direct access to the Pi's existing input\/output hardware.\u003c\/p\u003e \u003cp\u003eCommissioning requires a Micro-USB power supply for the Raspberry Pi as well as an operating system and software. The case itself contains no electronic components and requires no calibration or additional driver installation.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe case contains no high-voltage electronics and is not connected to the household power circuit. The integrated button is operated via low voltage from the Raspberry Pi. The product is intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x NESPI case for Raspberry Pi - Nintendo NES\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66044579283293,"sku":"F23108487","price":28.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/nespi-gehaeuse-fuer-raspberry-pi-nintendo-nes-funduino-4697013.jpg?v=1791487519"},{"product_id":"gehause-fur-raspberry-pi-2-b-transparent","title":"Housing for Raspberry Pi 2 B+ - transparent, stackable","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTransparent plastic protective case for Raspberry Pi 2 B\u003c\/li\u003e \u003cli\u003eFull coverage with open access ports\u003c\/li\u003e \u003cli\u003eStackable and robustly constructed\u003c\/li\u003e \u003cli\u003eProvides access to the GPIO header and interfaces\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe case protects a single-board computer from dirt and mechanical damage, while its transparent design provides an unobstructed view of the board. This is particularly useful in development and demonstration scenarios when the LED status indicators need to remain visible or the placement of the components needs to be monitored.\u003c\/p\u003e \u003cp\u003eAll interfaces, USB ports, the Ethernet jack, the HDMI port, and the 3.5 mm audio jack are accessible through cutouts. The GPIO header remains uncovered, allowing sensors and actuators to be connected directly. The case therefore offers a balance between protection and accessibility.\u003c\/p\u003e \u003cp\u003eTypical areas of application include stationary test setups in workshops and laboratories, where the computer runs on development projects over extended periods, as well as prototyping environments with frequent hardware changes. Transparency also makes it easier to understand the hardware architecture in educational settings. Multiple cases can be stacked, saving space when managing several units.\u003c\/p\u003e \u003cp\u003eThe case is intended for the Raspberry Pi 2 B; other versions do not fit. Heat buildup may occur if the computer runs under load for extended periods and the case is used in warm environments. In such cases, sufficient air circulation should be ensured or a ventilated model should be used instead.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe case itself is passive and harmless. It is intended solely to provide protection during prototyping and development activities. When using the computer installed inside it, its operating instructions take precedence.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66044597600605,"sku":"F23108641","price":2.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gehaeuse-fuer-raspberry-pi-2-b-transparent-funduino-1793732.jpg?v=1791487564"},{"product_id":"gehause-mit-lufter-fur-raspberry-pi-3-schwarz","title":"Case for Raspberry Pi 3 - with fan, metal insert, black","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlastic case for credit card-sized single-board computers\u003c\/li\u003e \u003cli\u003eIntegrated fan for active cooling\u003c\/li\u003e \u003cli\u003eHeat conduction to the CPU and RAM via a metal insert\u003c\/li\u003e \u003cli\u003eOpenings for all standard connectors\u003c\/li\u003e \u003cli\u003eBlack, two-piece design\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA case with an integrated fan protects the single-board computer from dust and mechanical damage, while heat conduction via a metal insert reliably prevents overheating. The active fan connects directly to the board and does not require a separate power supply.\u003c\/p\u003e \u003cp\u003eThe computer operates more thermally stably under load, which is particularly relevant for continuous applications or in warm environments. This eliminates processor speed throttling caused by thermal protection. The two-piece case can be opened without tools to upgrade the computer when needed.\u003c\/p\u003e \u003cp\u003eTypical applications include stationary systems in industrial or server cabinets, media centers with longer operating periods, and outdoor weather station setups. When used as network storage or in cluster configurations, the case also reduces the risk of temperature-related failures.\u003c\/p\u003e \u003cp\u003eThe case requires an available GPIO connection for the fan. Ventilation openings and connector pins must be kept free of dust regularly to maintain cooling performance.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe case is intended exclusively for building prototypes and for testing and development purposes. The single-board computer must not be connected to the household power supply. Work on the power supply or installation must be carried out by qualified electricians.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66044770877789,"sku":"F23108408","price":4.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gehaeuse-mit-luefter-fuer-raspberry-pi-3-schwarz-funduino-4516763.jpg?v=1791488406"},{"product_id":"master-armor-gehause-fur-raspberry-pi-4-verschiedene-farben","title":"Armor case for Raspberry Pi 4 - aluminum with fan, various colors","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eProtective case for single-board computers in several versions\u003c\/li\u003e \u003cli\u003eComplete protection against dust and mechanical damage\u003c\/li\u003e \u003cli\u003eActive cooling through integrated fans\u003c\/li\u003e \u003cli\u003eAccessible connection openings for GPIO, USB, and power supply\u003c\/li\u003e \u003cli\u003eCompact aluminum construction with heat conduction\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe Armor case protects a single-board computer from environmental influences and mechanical damage. With different versions available, the case is suitable for various applications. The sturdy aluminum construction dissipates heat and prevents overheating during operation.\u003c\/p\u003e \u003cp\u003eIntegrated fans provide active ventilation and heat dissipation. The precisely positioned cutouts provide access to all important connections without having to remove the computer from the case. The case can be installed and removed without tools.\u003c\/p\u003e \u003cp\u003eIt is suitable for stationary projects in workshops and laboratories, outdoor installations that require protection from splashing water and dust, and systems in cabinets or shelves under heavy load. The material's heat conduction also proves effective in environments with thermal stress.\u003c\/p\u003e \u003cp\u003eThe fan requires an additional power supply for operation. The case does not replace the computer's required mains power supply.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe case contains moving fans that may cause crush injuries. Contact with the fans during operation must be prevented. The device is intended solely for building prototypes and for testing and development purposes.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Armor case for Raspberry Pi 4 - various colors\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Blue","offer_id":66044781429085,"sku":"F23108980","price":11.7,"currency_code":"EUR","in_stock":false},{"title":"Gray","offer_id":66046154735965,"sku":"F23108985","price":11.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-armor-gehaeuse-fuer-raspberry-pi-4-verschiedene-farben-funduino-7573026.png?v=1791489688"},{"product_id":"argon-neo-aluminium-gehause-fur-raspberry-pi-4","title":"Argon Neo case for Raspberry Pi 4 - aluminum, passively cooled","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAluminum case for Raspberry Pi 4 with active heat conduction\u003c\/li\u003e \u003cli\u003eComplete coverage of all ports while remaining accessible without disassembly\u003c\/li\u003e \u003cli\u003eIntegrated cooling fins for passive heat dissipation\u003c\/li\u003e \u003cli\u003eMagnetic cover for the SD card and GPIO pins\u003c\/li\u003e \u003cli\u003eDimensions fit standard single-board computers of the Pi 4 generation exactly\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eAn aluminum case for the Pi 4 single-board computer protects against dirt and damage while keeping all interfaces, such as USB, Ethernet, and HDMI, directly accessible from the outside of the case. The material dissipates processor heat, enabling cooling without additional fans.\u003c\/p\u003e \u003cp\u003eThe case uses continuous aluminum structures and a finned surface that increases heat dissipation into the surrounding air. The magnetic cover for the GPIO header and SD card slot protects these components and can be completely removed when needed.\u003c\/p\u003e \u003cp\u003eTypical applications include stationary uses such as network servers in cabinets, media players in living rooms, or data loggers in small-series automation systems. The case protection is particularly useful in commercial or multi-device environments where multiple single-board computers are mounted in a space-saving manner or external factors could cause damage.\u003c\/p\u003e \u003cp\u003eThe case fits the dimensions of the Pi 4 generation exactly; other models require a different case. Heat conduction works optimally when the single-board computer is not operated in an environment above 35 °C. Thermal paste between the processor and the case lid is not included and must be obtained separately if maximum heat transfer is desired.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe case is intended exclusively for building prototypes and for testing and development purposes. Work on or near electrical installations is reserved for qualified electricians; if anything is unclear, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Argon Neo aluminum case for Raspberry Pi 4\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66044831793501,"sku":"F23109095","price":13.4,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/argon-neo-aluminium-gehaeuse-fuer-raspberry-pi-4-funduino-8280193.png?v=1791488642"},{"product_id":"kuhlgehause-fur-den-raspberry-pi-4-aluminium-schwarz","title":"Cooling case for Raspberry Pi 4 - aluminum, passive, black","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAluminum cooling case for Raspberry Pi 4\u003c\/li\u003e \u003cli\u003ePassive cooling without a fan\u003c\/li\u003e \u003cli\u003eThermal paste included\u003c\/li\u003e \u003cli\u003eDirect contact between the SoC and the case wall\u003c\/li\u003e \u003cli\u003eCompatible with standard HAT modules\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe aluminum cooling case for the Raspberry Pi 4 uses passive heat conduction to reduce the processor temperature. Heat from the system-on-chip is transferred directly to the case wall, where it is released into the surrounding environment. This eliminates moving parts and the associated risk of failure.\u003c\/p\u003e \u003cp\u003eA well-designed interior efficiently dissipates heat without obstructing access to the GPIO pins. The included thermal paste ensures optimal thermal contact between the chip and the case. Once applied and dried, the paste remains effective permanently and requires no maintenance.\u003c\/p\u003e \u003cp\u003eThe case is particularly suitable for continuous operation in enclosed spaces or for projects where a passive solution saves energy costs. Even under moderate load, the system keeps the temperature within a safe range, even when the Raspberry Pi is running at full load for extended periods. Additional measures may be required for extremely intensive applications with continuous maximum utilization.\u003c\/p\u003e \u003cp\u003eThe case comes ready to assemble; only thermal paste needs to be applied and the module fitted. Compatibility with standard expansion modules is maintained, as the case height takes up no significant space. A power supply for the Raspberry Pi is required separately.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe thermal paste is irritating to the skin; wash hands thoroughly after handling. The cooling case is intended exclusively as an accessory for prototyping, testing, and development purposes. When working on the hardware, consult a qualified electrician if you are unsure.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Cooling case for the Raspberry Pi 4 - aluminum, black\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66044840182109,"sku":"F23108987","price":15.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kuehlgehaeuse-fuer-den-raspberry-pi-4-aluminium-schwarz-funduino-6816313.png?v=1791488406"},{"product_id":"blaues-aluminium-gehause-fur-raspberry-pi-4-inkl-lufter","title":"Aluminum case for Raspberry Pi 4 - with fan, blue","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAluminum case for Raspberry Pi 4\u003c\/li\u003e \u003cli\u003eLow-profile design with integrated passive cooling\u003c\/li\u003e \u003cli\u003eProvides active cooling capability for more stable continuous operation\u003c\/li\u003e \u003cli\u003eFor project builds in industry and hobby applications\u003c\/li\u003e \u003cli\u003eProtection against dirt and mechanical damage\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis aluminum case protects a Raspberry Pi 4 from environmental influences and damage. The low-profile design enables installation in compact systems and keeps the system cool enough through heat conduction for longer continuous operation without additional fans.\u003c\/p\u003e \u003cp\u003eThe aluminum absorbs the processor's heat and dissipates it to the outside. This significantly reduces the risk of throttling during intensive computing tasks or continuous operation. Passive heat conduction is sufficient in many cases; those planning for extreme loads or very warm environments can additionally integrate a fan.\u003c\/p\u003e \u003cp\u003eThe case is suitable for data logger projects that record values over hours or days, network installations with a wired setup, or as a basis for small industrial controllers with Raspberry Pi. The compact form also fits in space-limited mounting situations.\u003c\/p\u003e \u003cp\u003eFor operation, the Raspberry Pi 4 requires a Micro-HDMI cable, USB-C power supply, and SD card, which must be obtained separately. The cooling performance is not sufficient for overclocked systems or continuous operation without air circulation in very warm rooms above 35 °C.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe case is intended exclusively for prototype construction and testing and development purposes. It must not be installed in the household power circuit. If you have questions about safe integration into existing electrical installations, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Blue aluminum case for Raspberry Pi 4, including fan\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66044877504861,"sku":"F23109137","price":13.24,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/blaues-aluminium-gehaeuse-fuer-raspberry-pi-4-inkl-luefter-funduino-3852856.png?v=1791488648"},{"product_id":"master-armor-gehause-mit-lufter-fur-raspberry-pi-4-verschiedene-farben","title":"Armor case for Raspberry Pi 4 - aluminum with fan, various colors","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eProtective case for Raspberry Pi 4 with active cooling\u003c\/li\u003e \u003cli\u003eAluminum construction with integrated fan\u003c\/li\u003e \u003cli\u003ePassive heat conductor for heat distribution\u003c\/li\u003e \u003cli\u003eAvailable in several colors\u003c\/li\u003e \u003cli\u003eConnection pins and card slots remain accessible\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe Armor case provides protection and cooling for the Raspberry Pi 4. The aluminum case with an integrated fan ensures that the single-board computer does not overheat, even under load. A passive heat conductor distributes heat evenly across the case, while the active fan continuously expels warm air.\u003c\/p\u003e \u003cp\u003eThe design is intended for direct mounting on the board. The fan can be replaced separately if it becomes worn after extended use. All important connections and the SD card slot remain accessible, so the Raspberry Pi remains fully functional. Network and USB ports are not covered.\u003c\/p\u003e \u003cp\u003eThe case is used in projects that operate the Raspberry Pi under high CPU load for extended periods, such as processing camera data in surveillance systems or running locally installed AI models. The Pi also benefits from the comparatively low operating temperature when used as a stable solution for stationary server tasks on a home network. Those who use the single-board computer in warm environments get a simple solution for avoiding throttling caused by thermal protection.\u003c\/p\u003e \u003cp\u003eThe fan requires power supplied via a GPIO pin of the Raspberry Pi or an external power supply. The exact connection method depends on the model used and should be taken into account before installation.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe case is intended solely to protect and cool the Raspberry Pi during prototyping, testing, and development. The integrated fan has moving parts during operation. Work on the fan's power supply or installation work that affects electrical installations must be performed by qualified electricians; if you have questions about the correct pin assignment, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x\u0026nbsp;Armor case for Raspberry Pi 4 - various colors\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Gold","offer_id":66045038428509,"sku":"F23109032","price":13.3,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":66047316689245,"sku":"F23106782","price":13.3,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":66046154375517,"sku":"F23108970","price":13.3,"currency_code":"EUR","in_stock":true},{"title":"Gray","offer_id":66046151328093,"sku":"F23109031","price":13.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-armor-gehaeuse-mit-luefter-fuer-raspberry-pi-4-verschiedene-farben-funduino-1401064.png?v=1791489884"},{"product_id":"gehause-fur-raspberry-pi-3-und-pi-3b-aluminium-schwarz","title":"Case for Raspberry Pi 3 and 3B+ - aluminum, black","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAluminum case for Raspberry Pi 3 and Pi 3B\u003c\/li\u003e \u003cli\u003ePassive cooling through heat conduction into the case\u003c\/li\u003e \u003cli\u003eTool-free assembly\u003c\/li\u003e \u003cli\u003eProtective contact and strain relief for USB ports\u003c\/li\u003e \u003cli\u003eCorner mounting with rubber feet\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe aluminum case protects single-board computers in the Raspberry Pi 3 series and passively dissipates processor heat into the metal case. This improves operating stability during extended use without requiring additional fans.\u003c\/p\u003e \u003cp\u003eThe tool-free assembly provides quick access to the GPIO pins and ports. Rubber feet on the base prevent slipping on the work surface. Reinforced openings for USB and Ethernet ports provide strain relief and reduce the risk of wear-related damage.\u003c\/p\u003e \u003cp\u003eTypical applications include stationary test setups, small automation projects, and portable applications in which the case protects the electronics from mechanical damage and contamination. The product requires a Raspberry Pi 3 or Pi 3B single-board computer and is not compatible with older or newer Pi models.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis case is intended exclusively for prototype assembly and testing and development purposes and is not suitable for installation in the household electrical circuit. When used with a power supply, check the operating voltage and connection polarity. Work on or near electrical installations must be carried out by qualified electricians; if in doubt, consult a qualified electrician before commissioning.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045043671389,"sku":"F23108560","price":9.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gehaeuse-fuer-raspberry-pi-3-und-pi-3b-aluminium-schwarz-funduino-4294287.jpg?v=1791488247"},{"product_id":"dual-fan-lufter-fur-raspberry-pi3-pi2-nespi-gehause","title":"Dual fan for Raspberry Pi - 5 V via GPIO, temperature-controlled","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eActive cooler fan for single-board computers with two propellers\u003c\/li\u003e \u003cli\u003ePowered via the host device's GPIO connector\u003c\/li\u003e \u003cli\u003eOperating voltage: 5 V\u003c\/li\u003e \u003cli\u003eSuitable for noise-sensitive continuous-load scenarios thanks to temperature-dependent control\u003c\/li\u003e \u003cli\u003eMounted on an aluminium heatsink using thermal compound\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA dual fan for actively cooling single-board computers such as the Raspberry Pi uses two propellers to prevent heat buildup under load. It is powered directly via the host device's GPIO pins with 5 V, so no separate power supply is required.\u003c\/p\u003e \u003cp\u003eThe temperature-dependent control dynamically regulates the speed. At low loads, the fan runs slowly or switches off; as the temperature rises, the speed automatically increases. This prevents unnecessary noise when idle while also reducing heat under full load. The fan is mounted on an aluminium heatsink, which is connected to the processor using thermal compound.\u003c\/p\u003e \u003cp\u003ePossible applications include systems with continuous computing workloads, such as media servers, network storage systems, or continuous data acquisition via sensors. In compact enclosures where convection alone is insufficient, the active cooling circuit also contributes to operational stability.\u003c\/p\u003e \u003cp\u003eA freely accessible GPIO header with unused pins for the power connection is required. Installation in standard enclosures is possible, but the available space must be checked. If you have questions about the GPIO pinout, consult a specialist retailer or the device documentation before commissioning.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe fan is intended exclusively for building prototypes and for testing and development purposes. Incorrect GPIO wiring can cause the host device to fail. Check the pinout against the official documentation before connecting the power. Consult a qualified electrician if anything is unclear.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Dual fan for Raspberry Pi3, Pi2, NESPI case\u003c\/li\u003e \u003cli\u003eRaspberry Pi NOT included\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045087973725,"sku":"F23108838","price":2.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/dual-fan-luefter-fuer-raspberry-pi3-pi2-nespi-gehaeuse-funduino-4024638.jpg?v=1791488813"},{"product_id":"abs-gehause-fur-raspberry-pi-3-modell-b-schwarz","title":"Case for Raspberry Pi 3 Model B+ - ABS, Black","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eABS plastic protective case for single-board computers\u003c\/li\u003e \u003cli\u003eFits standard enclosure mounting\u003c\/li\u003e \u003cli\u003eBlack finish\u003c\/li\u003e \u003cli\u003eOpenings for the GPIO header and standard connectors\u003c\/li\u003e \u003cli\u003eCover design for easy assembly\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe ABS enclosure protects a single-board computer from dust and dirt during extended operating periods. The plastic provides sufficient stability for laboratory benches and project setups without significantly impairing heat dissipation.\u003c\/p\u003e \u003cp\u003eThe design includes cutouts for the connector header and the usual interfaces. This preserves full access to the interface headers without having to open the enclosure. The cover shape enables quick assembly and subsequent modifications to the board.\u003c\/p\u003e \u003cp\u003eThe enclosure is suitable for stationary measurement setups in the workshop, long-running prototypes, environments with increased dust levels, and long-term educational use where stability and protection against wear are more important than mobile use.\u003c\/p\u003e \u003cp\u003eHeat dissipation through the enclosure wall is limited. For applications with permanently high processor utilization, the ambient temperature should remain below 35 °C. Installation requires aligning the enclosure with the designated mounting points on the board.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe enclosure is intended exclusively for assembling prototypes and for testing and development purposes. It is not designed for installation on power lines or connection to the household power supply. All electrical connections must be checked before operation; if in doubt, consult a qualified electrician.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045128212829,"sku":"F23108847","price":2.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/abs-gehaeuse-fuer-raspberry-pi-3-modell-b-schwarz-funduino-7534642.jpg?v=1791488530"},{"product_id":"aluplus-tool-l-40-1","title":"Allit AluPlus Tool L 40-1 tool case - aluminium, 395 x 315 x 140 mm","description":"\u003cdiv class=\"d-none d-sm-block\"\u003e \u003ch1\u003eAluPlus Tool \u003eL\u003c 40-1\u003c\/h1\u003e \u003c\/div\u003e \u003ch3 class=\"subtitle\"\u003eTool and leisure case\u003c\/h3\u003e \u003cdiv class=\"short\"\u003eThe stylish cases with aluminum frames, partly featuring plastic applications, are practical and sturdy helpers, ideal for hobbies and leisure.\u003c\/div\u003e \u003cdiv class=\"wrap-benefits text-block\"\u003e \u003cul class=\"benefits\"\u003e \u003cli\u003eSturdy, lockable metal toggle latches and solid hinges\u003c\/li\u003e \u003cli\u003eAdjustable compartment layout using lockable plastic dividers with dovetail guides\u003c\/li\u003e \u003cli\u003eSturdy tool holder with loops\u003c\/li\u003e \u003cli\u003eEasy to clean thanks to smooth interior surfaces\u003c\/li\u003e \u003cli\u003eScratch-resistant plastic corners provide the case with sturdy protection\u003c\/li\u003e \u003cli\u003eOptional shoulder strap available as an accessory\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003cdiv class=\"wrap-productinformation text-block\"\u003e \u003ch4\u003e \u003c\/h4\u003e \u003ctable class=\"productinformation\"\u003e \u003ctbody\u003e \u003ctr class=\"outsidedimensions\" title=\"BxTxH (mm)\"\u003e\n\u003cth\u003eExternal dimensions\u003c\/th\u003e \u003ctd\u003e\u003cspan title=\"BxTxH (mm)\"\u003e395x315x140\u003c\/span\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"insidedimensions\" title=\"BxTxH (mm)\"\u003e\n\u003cth\u003eUsable dimensions\u003c\/th\u003e \u003ctd\u003e\u003cspan title=\"BxTxH (mm)\"\u003e380x285x125\u003c\/span\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"color\"\u003e\n\u003cth\u003eColor\u003c\/th\u003e \u003ctd\u003eSilver\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"material\"\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e \u003ctd\u003eAluminum, hardboard, plastic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"producttitle\"\u003e\n\u003cth\u003eProduct name\u003c\/th\u003e \u003ctd\u003eTool case\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"materialnumber\"\u003e\n\u003cth\u003eItem no.\u003c\/th\u003e \u003ctd\u003e425151\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"ean\"\u003e\n\u003cth\u003eEAN\u003c\/th\u003e \u003ctd\u003e4005187251517\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e\u003cbr\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1* AluPlus Tool \u003eL\u003c 40-1\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"Allit AG","offers":[{"title":"Default Title","offer_id":66045173334365,"sku":"F23110198","price":22.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/aluplus-tool-l-40-1-funduino-9918928.jpg?v=1791487967"},{"product_id":"elektronik-box-sicherung-entstorfilter-hf-emv-5mm-x-46mm-x-28mm","title":"Noise suppression filter with fuse - mains filter, up to 30 MHz, 46 x 28 mm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eNetzentenc interference filter with fuse for 5-mm hole pattern\u003c\/li\u003e \u003cli\u003eWorm filters for mains inputs\u003c\/li\u003e \u003cli\u003eCrank capacitors and chokes for RF filtering\u003c\/li\u003e \u003cli\u003eIntegrated fuse for mains protection\u003c\/li\u003e \u003cli\u003eRFI suppression up to 30 MHz\u003c\/li\u003e \u003cli\u003eInstallation in standard 5-mm stripboard\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eAn interference filter with an integrated fuse for mains input applications suppresses high-frequency interference signals up to 30 MHz. The module combines coils and capacitors into a filter structure that improves electromagnetic compatibility in accordance with common EMC standards.\u003c\/p\u003e \u003cp\u003eThe fuse protects the connected circuit against overload, while the chokes and capacitor elements filter interference voltages out of the mains supply. This can significantly reduce emissions from switching power supplies or other high-frequency components. The 5-mm hole spacing fits standard prototyping boards and enables direct construction of prototypes on circuit boards with the corresponding pitch.\u003c\/p\u003e \u003cp\u003eThe filter belongs on the input side of battery-powered or mains-powered circuits, especially where digital logic works together with analog measurement circuits. Typical applications include laboratory setups with oscilloscopes or frequency analyzers, where EMC problems are to be detected or resolved.\u003c\/p\u003e \u003cp\u003eThe 5-mm hole spacing requires a prototyping board with the corresponding pitch. The associated datasheet must be consulted for dimensioning and tuning the filter characteristics.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThis module is not intended for direct installation in household mains circuits. It is intended exclusively for building prototypes and for testing and development purposes. Work on or near electrical installations must be carried out by qualified electricians; if you have questions about safe wiring, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Electronics box fuse \/ interference filter (RF, EMC) 5mm x 46mm x 28mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045229990237,"sku":"F23107803","price":1.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/elektronik-box-sicherung-entstoerfilter-hf-emv-5mm-x-46mm-x-28mm-funduino-8560319.png?v=1791488558"},{"product_id":"grove-wrapper-1x1-gelb-4-stuck","title":"Grove Wrapper 1x1 - housing for Grove modules, yellow, set of 4","description":"\u003ch2\u003eGrove - Yellow Wrapper\u003c\/h2\u003e \u003ch3\u003eDescription\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eHousing for securing and protecting Grove modules.\u003c\/li\u003e \u003cli\u003eSemi-open space prevents interference during use.\u003c\/li\u003e \u003cli\u003eMakes it easier to optimize modules and present projects.\u003c\/li\u003e \u003cli\u003eIdeal for clear, clean project presentations online.\u003c\/li\u003e \u003cli\u003eExpandable with Lego bricks, Makeblock, and more.\u003c\/li\u003e \u003cli\u003eEasy assembly and disassembly thanks to the mechanical design.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eEnables the creation of electronic construction-block projects.\u003c\/li\u003e \u003cli\u003eCompatible with Lego and Makeblock modules.\u003c\/li\u003e \u003cli\u003eFlex mounting for easy installation\/replacement of modules.\u003c\/li\u003e \u003cli\u003eSemi-open space for safe storage and interference-free use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eExpanding Lego bricks and Makeblock.\u003c\/li\u003e \u003cli\u003ePresenting projects.\u003c\/li\u003e \u003cli\u003eRepairing and protecting modules.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003ctable border=\"1\"\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003eDesignation\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eDimensions\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDimensions (large)\u003c\/td\u003e \u003ctd\u003e50 × 25 × 13 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eLayer dimensions (small)\u003c\/td\u003e \u003ctd\u003e25 × 25 × 13 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMaterial\u003c\/td\u003e \u003ctd\u003eAbs\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003eWhat is Grove?\u003c\/h3\u003e \u003cp\u003eGrove makes connecting and experimenting easier and simplifies the prototyping process. No jumpers or soldering are required. More than 300 Grove modules have been developed, covering a wide range of applications and meeting a variety of requirements. Not only the hardware but also the software is open source.  We offer various Grove shields to enable connections to the Grove system with different microcontrollers. \u003c\/p\u003e \u003ch3\u003ePackage Contents\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e4x Grove - Yellow Wrapper 1x1\u003c\/li\u003e \u003cli\u003e1x Screw Set\u003c\/li\u003e \u003c\/ul\u003e","brand":"Seeedstudio","offers":[{"title":"Default Title","offer_id":66045435609437,"sku":"F23109254","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/grove-wrapper-1x1-gelb-4-stueck-funduino-6664850.jpg?v=1791489083"},{"product_id":"elektronik-box-sicherung-entstorfilter-hf-emv-42mmx41mmx26-5mm","title":"HF interference suppression filter - EMC, metal housing, 42 x 41 x 26,5 mm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eNoise suppression filter for high-frequency interference in electronics\u003c\/li\u003e \u003cli\u003eShielding against RF emissions up to a range of 42 m\u003c\/li\u003e \u003cli\u003eSuitable for power supplies and signal lines\u003c\/li\u003e \u003cli\u003eEMC-tested according to applicable standards\u003c\/li\u003e \u003cli\u003eRobust metal housing with mounting options\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eA noise suppression filter suppresses high-frequency electromagnetic interference originating from or affecting electronic devices. The module provides protection up to a range of 42 meters and meets electromagnetic compatibility (EMC) requirements. It is connected between the power source and sensitive electronics.\u003c\/p\u003e \u003cp\u003eThe filter works in two ways, It diverts high-frequency interference and simultaneously attenuates external interference. This significantly reduces the likelihood of malfunctions in nearby devices. The metal housing further enhances the shielding effect.\u003c\/p\u003e \u003cp\u003eUsing the filter is particularly useful when operating switching power supplies near analog sensors, where interference could cause measurement errors. It also improves reliability in systems with multiple radio-controlled modules or when located near high-frequency sources. In automated systems, it prevents false triggering caused by electromagnetic interference.\u003c\/p\u003e \u003cp\u003eThe filter is installed in the power supply line and does not require a separate power supply. Work on electrical installations must be carried out by a qualified electrician. The 42-meter range refers to effectiveness against external interference sources at this distance, not to spatial propagation limits.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe filter is not intended for direct installation in household power circuits. Work on or near electrical installations may only be carried out by a qualified electrician; if you are unsure about the correct wiring, consult a qualified electrician before commissioning. The device is intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e \u003ch4\u003ePackage Contents\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Electronics Box Fuse \/ Noise Suppression Filter (RF, EMC) 42mmx41mmx26.5mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045497344349,"sku":"F23107804","price":1.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/elektronik-box-sicherung-entstoerfilter-hf-emv-42mmx41mmx265mm-funduino-6403891.png?v=1791490502"},{"product_id":"schwarzes-aluminium-gehause-fur-raspberry-pi-4-inkl-lufter","title":"Aluminum case for Raspberry Pi 4 - black, with fan","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAluminum protective case for Raspberry Pi 4\u003c\/li\u003e \u003cli\u003ePrecision fit without modifying the board\u003c\/li\u003e \u003cli\u003eFour cooling fins on the top\u003c\/li\u003e \u003cli\u003eAccess to all standard ports\u003c\/li\u003e \u003cli\u003eIncludes four rubber feet and mounting hardware\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe aluminum case protects the Raspberry Pi 4 from dirt and mechanical damage during operation. The metal case directly dissipates the heat generated by the CPU and RAM, allowing higher and more stable clock speeds without additional heatsinks.\u003c\/p\u003e \u003cp\u003eThe four integrated cooling fins increase the surface area for heat dissipation. All USB ports, the Ethernet socket, and the HDMI port remain unobstructed and accessible. The microSD card can be accessed from above, as can the GPIO header.\u003c\/p\u003e \u003cp\u003eThe case is suitable for continuous operation of media centers, network storage devices, or small web servers in living spaces and offices. Even under constant workloads such as video conversion or data analysis, the heat dissipation keeps temperatures within a safe range without throttling.\u003c\/p\u003e \u003cp\u003eThe four non-slip rubber feet stabilize the case on flat surfaces. Mounting hardware is included, and the board fits securely into place. Only a screwdriver is required for installation.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe case dissipates heat and becomes warm during operation. Contact with the top should be avoided during operation. The product is intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Black aluminum case for Raspberry Pi 4, including fan\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045511663965,"sku":"F23109153","price":12.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/schwarzes-aluminium-gehaeuse-fuer-raspberry-pi-4-inkl-luefter-funduino-1036887.png?v=1791489131"},{"product_id":"grove-wrapper-1x2-rot-4-stuck","title":"Grove Wrapper 1x2 - red module housing, 4 pieces","description":"\u003ch2\u003eGrove - Wrapper\u003c\/h2\u003e \u003cp\u003eAre you ready to start an electronic building-block project? The Grove Wrapper design uses a partially open space that does not cause interference when using Grove modules. Grove Wrappers protect your project and are compatible with, for example, Lego and Makeblock modules.\u003c\/p\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBuild an electronic building-block project: Provide colorful housings and enable modules to be connected to one another.\u003c\/li\u003e \u003cli\u003eHighly compatible: Compatible with Lego and Makeblock modules, making your project adaptable and interesting.\u003c\/li\u003e \u003cli\u003eEasy to use\/replace: Flexible mounting for convenient installation and replacement of Grove modules.\u003c\/li\u003e \u003cli\u003eSafety: Partially open space, no interruption when using Grove modules. Keep your project safe at all times.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDimensions: 50 × 25 × 13 mm\u003c\/li\u003e \u003cli\u003eLayer dimensions: 25 × 25 × 13 mm\u003c\/li\u003e \u003cli\u003ePackage dimensions: 80mm x 120mm x 15mm\u003c\/li\u003e \u003cli\u003eMaterial: ABS\u003c\/li\u003e \u003cli\u003eWeight: 30g\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eWhat is Grove?\u003c\/h3\u003e \u003cp\u003eGrove makes connecting and experimenting easier and simplifies the prototyping process. No jumpers or soldering are required. More than 300 Grove modules have been developed, covering a wide range of applications and meeting a variety of requirements. Not only the hardware but also the software is open source.\u003c\/p\u003e \u003ch3\u003eBill of materials\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e4x Grove - Wrapper red 1x2\u003c\/li\u003e \u003cli\u003eMounting screws\u003c\/li\u003e \u003c\/ul\u003e","brand":"Seeedstudio","offers":[{"title":"Default Title","offer_id":66045613670749,"sku":"F23109292","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/grove-wrapper-1x2-rot-4-stueck-funduino-5292453.jpg?v=1791490082"},{"product_id":"schwarzes-aluminiumgehause-fur-raspberry-pi-4","title":"Aluminum case for Raspberry Pi 4 - Black, passive cooling","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eProtective aluminum case for Raspberry Pi 4\u003c\/li\u003e \u003cli\u003ePassive heat dissipation through the metal construction\u003c\/li\u003e \u003cli\u003eCompact design with optimized ventilation\u003c\/li\u003e \u003cli\u003eSecure attachment of all components without tools\u003c\/li\u003e \u003cli\u003eFull access to USB, HDMI, and GPIO ports\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe aluminum case provides the Raspberry Pi 4 with mechanical protection and heat management. The metal construction dissipates heat from the processor and RAM to the outside without the need for additional heatsinks or active ventilation. This reduces the operating temperature and increases reliability during extended use.\u003c\/p\u003e \u003cp\u003eThe individual components can be mounted and removed without tools. All interfaces of the minicomputer remain freely accessible, so GPIO expansions, USB devices, and HDMI monitors can still be connected after installation. The case fits securely and does not slip.\u003c\/p\u003e \u003cp\u003eSuch systems are often used as compact media servers, control units in automation projects, or as a basis for robotics prototypes. The case also protects stable testing and development setups from damage caused by dust or accidental contact. Its protective function is particularly valuable in mobile applications or workshop environments.\u003c\/p\u003e \u003cp\u003eThe Raspberry Pi 4 is purchased separately. The case is purely a protective solution without its own power supply or additional functions.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe case is intended exclusively for building prototypes and for testing and development purposes. It is not intended for installation in the household electrical system. When working on or in the immediate vicinity of electrical installations, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Black aluminum case for Raspberry Pi 4\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045615931741,"sku":"F23109139","price":9.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/schwarzes-aluminiumgehaeuse-fuer-raspberry-pi-4-funduino-9189602.jpg?v=1791490177"},{"product_id":"aluminiumgehause-fur-raspberry-pi-4-ultra-dunn","title":"Aluminum case for Raspberry Pi 4 - ultra-thin, 13 mm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eUltra-thin aluminium case for single-board computers\u003c\/li\u003e \u003cli\u003eOnly 13 mm high, fits Raspberry Pi 4 Model B\u003c\/li\u003e \u003cli\u003eHeat dissipation through direct aluminium contact with the mainboard\u003c\/li\u003e \u003cli\u003eOpenings for all standard ports and GPIO headers\u003c\/li\u003e \u003cli\u003eTool-free assembly with a clamping design\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe aluminium case provides compact protection for a single-board computer and is particularly suitable where space is limited. The ultra-thin design, with a height of only 13 mm, allows installation in confined spaces, such as cabinets, under desks, or inside other devices where conventional plastic cases do not fit. Despite its minimal height, full access to all standard interfaces is maintained.\u003c\/p\u003e \u003cp\u003eHeat is dissipated directly through the aluminium contact between the case and the board. This provides better cooling than purely plastic solutions and raises throttling thresholds during prolonged loads. Assembly requires no additional tools: the board is simply clamped between the case and the cover. All ports and the GPIO header remain fully accessible.\u003c\/p\u003e \u003cp\u003eThe case is suitable for projects where the single-board computer is permanently installed in a device and visible connectors would cause problems or obstructions. Its enclosed design also offers advantages as transport protection for mobile applications or when operating in environments with dust or moisture. A suitable power supply and, if necessary, a memory card are required for operation in addition to the case.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe case is intended exclusively for building prototypes and for testing and development purposes. During assembly, ensure that no solder joints or components are damaged. If you are unsure about compatibility with other add-on modules, consult a qualified electrician before assembly.\u003c\/p\u003e \u003ch4\u003ePackage contents\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Aluminium case for Raspberry Pi 4 - Ultra-thin\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045622387037,"sku":"F23108967","price":19.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/aluminiumgehaeuse-fuer-raspberry-pi-4-ultra-duenn-funduino-3675974.png?v=1791489823"},{"product_id":"europlus-sortimentskasten-basic-37-7-20-7-27-facher-transparent-sortierbox","title":"Allit EuroPlus Organizer Case Basic 37\/7-20 - 7-27 Compartments, 370 x 295 x 60 mm","description":"\u003cdiv\u003ePlastic storage boxes with fixed compartment layouts, some with dividers\u003c\/div\u003e \u003cdiv\u003eThe EuroPlus Basic 37 storage boxes are available in various colors and compartment configurations. They help keep things organized and offer a wide range of uses in the workshop and household or for hobbies.\u003c\/div\u003e \u003cdiv\u003e \u003ch4\u003e \u003c\/h4\u003e \u003cul\u003e \u003cli\u003eSturdy snap fasteners\u003c\/li\u003e \u003cli\u003eSecure sorting: compartments close tightly with a transparent lid\u003c\/li\u003e \u003cli\u003eCustomizable layout with the 20 flexible dividers featuring dovetail guides\u003c\/li\u003e \u003cli\u003eClear handle area for labeling with an adhesive label\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr title=\"BxTxH (mm)\"\u003e\n\u003cth\u003eExternal dimensions\u003c\/th\u003e \u003ctd\u003e370x295x60\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e \u003ctd\u003eyellow, transparent\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e \u003ctd\u003ePolypropylene\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eProduct name\u003c\/th\u003e \u003ctd\u003eStorage box with 20 flexible dividers\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eItem no.\u003c\/th\u003e \u003ctd\u003e457234\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eEAN\u003c\/th\u003e \u003ctd\u003e4005187572346\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e","brand":"Allit AG","offers":[{"title":"Default Title","offer_id":66045626646877,"sku":"AL-457234","price":7.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/europlus-sortimentskasten-basic-377-20-7-27-faecher-transparent-sortierbox-funduino-7532466.jpg?v=1791490358"},{"product_id":"sortimentskasten-europlus-flex-37-27-schwarz-sortierbox","title":"Allit EuroPlus Flex 37-27 Organizer Case - 370 x 295 x 55 mm, Black","description":"\u003cdiv\u003eOrganizer boxes with removable insert bins\u003c\/div\u003e \u003cdiv\u003eFlexible and versatile organizer boxes with a special touch. Non-slip stackable on top of one another, with individually sized inserts.\u003c\/div\u003e \u003cdiv\u003e \u003ch4\u003e \u003c\/h4\u003e \u003cul\u003e \u003cli\u003eTransparent lid with sturdy snap fasteners\u003c\/li\u003e \u003cli\u003eSecure organization: removable insert bins close tightly with a transparent lid\u003c\/li\u003e \u003cli\u003eFree grip area for labeling with an adhesive label\u003c\/li\u003e \u003cli\u003eInsert with 3 compartments for screwdrivers, folding rulers, etc.\u003c\/li\u003e \u003cli\u003eCompatible with EuroPlus Depot 37\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch4\u003e \u003c\/h4\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr title=\"BxTxH (mm)\"\u003e\n\u003cth\u003eExternal dimensions\u003c\/th\u003e \u003ctd\u003e370x295x55\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e \u003ctd\u003eblack, transparent\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e \u003ctd\u003ePolypropylene\/polystyrene\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eProduct name\u003c\/th\u003e \u003ctd\u003eOrganizer boxes with removable insert bins\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eItem no.\u003c\/th\u003e \u003ctd\u003e457203\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eEAN\u003c\/th\u003e \u003ctd\u003e4005187572032\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e","brand":"Allit AG","offers":[{"title":"Default Title","offer_id":66045626941789,"sku":"AL-457203","price":14.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/sortimentskasten-europlus-flex-37-27-schwarz-sortierbox-funduino-7222720.jpg?v=1791490344"},{"product_id":"kuhlkorper-gehause-2w02-fur-raspberry-pi-zero-zero-w-zero-2w","title":"2W02 heatsink case - aluminum, for Raspberry Pi Zero","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eHeatsink case for Raspberry Pi Zero\u003c\/li\u003e \u003cli\u003eReduces the SoC temperature by up to 15 K under load\u003c\/li\u003e \u003cli\u003eAluminum construction with thermal compound\u003c\/li\u003e \u003cli\u003ePassive cooling without additional power supply\u003c\/li\u003e \u003cli\u003eTool-free installation using a plug-in connection\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe 2W02 heatsink case improves heat dissipation for the Raspberry Pi Zero. The system-on-chip operates significantly cooler thanks to the passive aluminum enclosure, preventing clock throttling and increasing reliability.\u003c\/p\u003e \u003cp\u003eThe processor's large contact area with the heatsink reduces the operating temperature by up to 15 K under load. The included thermal compound ensures better thermal contact. The system operates independently without an external power supply or additional components.\u003c\/p\u003e \u003cp\u003eIt is particularly useful for continuous-load applications, such as projects with constant video capture, continuous measurements, or prolonged network operation. Even in warmer environments, the processor remains within a stable operating range.\u003c\/p\u003e \u003cp\u003eThe case can be installed without tools and fits the Pi Zero's standard GPIO header. Additional accessories or expansion modules can still be connected. Installation takes just a few minutes.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe heatsink case is intended exclusively for building prototypes and for testing and development purposes. Before installation, check the installation area for dirt to ensure optimal thermal conductivity. Do not use the case if it is damaged.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x metal case\u003c\/li\u003e \u003cli\u003e4x screw\u003c\/li\u003e \u003cli\u003e1x adhesive pad\u003c\/li\u003e \u003cli\u003e1x pin header\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045641589085,"sku":"F23107554","price":7.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kuehlkoerper-gehaeuse-2w02-fuer-raspberry-pi-zero-zero-w-zero-2w-funduino-9892578.jpg?v=1791489248"},{"product_id":"europlus-pro-k-44-18-profi-kleinteilekoffer-mit-clips-sortierbox","title":"Allit EuroPlus Pro K44\/18 small-parts case - 440 x 355 x 76 mm, polycarbonate lid","description":"\u003cdiv\u003eInnovative professional plastic small-parts case with connecting fastener\u003c\/div\u003e \u003cdiv\u003eThe highly impact-resistant polycarbonate lid on a solid base provides secure storage for small parts. The cases can be customized with insert boxes and\/or dividers and securely connected using a connecting fastener.\u003c\/div\u003e \u003cdiv\u003e \u003ch4\u003e \u003c\/h4\u003e \u003cul\u003e \u003cli\u003eCustomizable layout with removable insert boxes or dividers\u003c\/li\u003e \u003cli\u003eTransparent lid closes securely; contents stay separated\u003c\/li\u003e \u003cli\u003eConnecting fastener enables the transport of up to 3 Euro Plus Pro \u0026gt;K\u0026lt; 44 (with 12 kg)\u003c\/li\u003e \u003cli\u003eErgonomic, fold-down handle\u003c\/li\u003e \u003cli\u003eInnovative connecting fastener enables secure locking\u003c\/li\u003e \u003cli\u003eHighly impact-resistant polycarbonate lid\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch4\u003e \u003c\/h4\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr title=\"BxTxH (mm)\"\u003e\n\u003cth\u003eExternal dimensions\u003c\/th\u003e \u003ctd\u003e440x355x76\u003c\/td\u003e \u003c\/tr\u003e \u003ctr title=\"BxTxH (mm)\"\u003e\n\u003cth\u003eUsable dimensions\u003c\/th\u003e \u003ctd\u003e400x275x60\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e \u003ctd\u003eBlack, blue, orange\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e \u003ctd\u003ePolystyrene, polycarbonate, polypropylene\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eProduct designation\u003c\/th\u003e \u003ctd\u003eProfessional small-parts case with clips\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eItem No.\u003c\/th\u003e \u003ctd\u003e454230\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eEAN\u003c\/th\u003e \u003ctd\u003e4005187542301\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e","brand":"Allit AG","offers":[{"title":"Default Title","offer_id":66045646045533,"sku":"AL-454230","price":19.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/europlus-pro-k4418-profi-kleinteilekoffer-mit-clips-sortierbox-funduino-9242780.jpg?v=1791490691"},{"product_id":"europlus-pro-k-44-23-profi-kleinteilekoffer-mit-clips-sortierbox","title":"Allit EuroPlus Pro K44\/23 small-parts case - 440 x 355 x 76 mm, with connecting latch","description":"\u003cdiv\u003eInnovative professional plastic small-parts case with connecting clasp\u003c\/div\u003e \u003cdiv\u003eThe highly impact-resistant polycarbonate lid on a sturdy base provides secure storage for small parts. The cases can be customized with insert boxes and\/or dividers and securely connected using the connecting clasp.\u003c\/div\u003e \u003cdiv\u003e \u003ch4\u003e \u003c\/h4\u003e \u003cul\u003e \u003cli\u003eCustomizable layout with removable insert boxes or dividers\u003c\/li\u003e \u003cli\u003eTransparent lid closes securely; contents remain separated\u003c\/li\u003e \u003cli\u003eErgonomic, fold-down handle\u003c\/li\u003e \u003cli\u003eExpandable with other EuroPlus Pro cases. Innovative connecting clasp enables secure locking\u003c\/li\u003e \u003cli\u003eHighly impact-resistant polycarbonate lid\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch4\u003e \u003c\/h4\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr title=\"BxTxH (mm)\"\u003e\n\u003cth\u003eExternal dimensions\u003c\/th\u003e \u003ctd\u003e440x355x76\u003c\/td\u003e \u003c\/tr\u003e \u003ctr title=\"BxTxH (mm)\"\u003e\n\u003cth\u003eUsable dimensions\u003c\/th\u003e \u003ctd\u003e400x275x60\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e \u003ctd\u003eBlack, blue, orange\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e \u003ctd\u003ePolystyrene, polycarbonate, polypropylene\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eProduct name\u003c\/th\u003e \u003ctd\u003eProfessional small-parts case with clips\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eItem No.\u003c\/th\u003e \u003ctd\u003e454210\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eEAN\u003c\/th\u003e \u003ctd\u003e4005187542103\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e","brand":"Allit AG","offers":[{"title":"Default Title","offer_id":66045656301917,"sku":"AL-454210","price":19.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/europlus-pro-k4423-profi-kleinteilekoffer-mit-clips-sortierbox-funduino-1554127.jpg?v=1791492152"},{"product_id":"schwarzes-kunststoffgehause-fur-arduino-uno","title":"Plastic enclosure for Arduino UNO - Black, tool-free assembly","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlastic protective case for Arduino UNO\u003c\/li\u003e \u003cli\u003ePrecisely fitted cutouts for the USB port and pin headers\u003c\/li\u003e \u003cli\u003eTool-free assembly, easy to put together and take apart\u003c\/li\u003e \u003cli\u003eBlack finish, compact design\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe case protects the board and its connectors during operation and transport. It securely holds the Arduino UNO without obstructing access to the USB port and pin headers for external modules. This means expansions can still be connected during operation.\u003c\/p\u003e \u003cp\u003eAssembly requires no soldering or special tools; the parts are clipped together or screwed in place. This allows the case to be opened and disassembled as often as needed when the board requires maintenance, new modules are being tested, or the power supply needs to be changed.\u003c\/p\u003e \u003cp\u003eTypical applications include housing stable prototypes in cabinets or on workstations, use in teaching and training environments where several Arduino UNO boards are operated simultaneously, and development projects in which the board needs to be protected from dirt and mechanical damage. The case also reduces the risk of short circuits caused by inadvertent contact with conductive parts.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe case is intended exclusively for housing development and test setups. Work on power supply lines or their installation must be carried out by qualified electricians; if you have questions about safely powering the Arduino UNO, consult a qualified electrician before commissioning.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045657383261,"sku":"F23108666","price":4.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/schwarzes-kunststoffgehaeuse-fuer-arduino-uno-funduino-7802301.png?v=1791491802"},{"product_id":"europlus-basic-18-1","title":"Allit EuroPlus Basic 18\/1 storage box - 180 x 150 x 40 mm, 1 compartment","description":"\u003ch3 class=\"subtitle\"\u003ePlastic organizer boxes with fixed compartment divisions\u003c\/h3\u003e \u003cdiv class=\"short\"\u003eThe EuroPlus Basic 18 organizer boxes are available in various colors and compartment configurations. They create order and offer a wide range of applications in the workshop and household or for hobbies.\u003c\/div\u003e \u003cdiv class=\"wrap-benefits text-block\"\u003e \u003cul class=\"benefits\"\u003e \u003cli\u003eHighly impact-resistant polypropylene\u003c\/li\u003e \u003cli\u003eSturdy snap closures\u003c\/li\u003e \u003cli\u003eTransparent, contents always clearly visible\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003cdiv class=\"wrap-productinformation text-block\"\u003e \u003ctable class=\"productinformation\"\u003e \u003ctbody\u003e \u003ctr class=\"outsidedimensions\" title=\"BxTxH (mm)\"\u003e\n\u003cth\u003eExternal dimensions\u003c\/th\u003e \u003ctd\u003e\u003cspan title=\"BxTxH (mm)\"\u003e180x150x40\u003c\/span\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"insidedimensions\" title=\"BxTxH (mm)\"\u003e\n\u003cth\u003eUsable dimensions\u003c\/th\u003e \u003ctd\u003e\u003cspan title=\"BxTxH (mm)\"\u003e165x120x34\u003c\/span\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"color\"\u003e\n\u003cth\u003eColor\u003c\/th\u003e \u003ctd\u003etransparent\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"material\"\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e \u003ctd\u003ePolypropylene\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"producttitle\"\u003e\n\u003cth\u003eProduct name\u003c\/th\u003e \u003ctd\u003eOrganizer box\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"materialnumber\"\u003e\n\u003cth\u003eItem no.\u003c\/th\u003e \u003ctd\u003e457170\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"ean\"\u003e\n\u003cth\u003eEAN\u003c\/th\u003e \u003ctd\u003e4005187571707\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1* EuroPlus Basic 18\/1\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"Allit AG","offers":[{"title":"Default Title","offer_id":66045658857821,"sku":"F23110199","price":3.76,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/europlus-basic-181-funduino-9843726.jpg?v=1791491859"}],"url":"https:\/\/funduino.com\/en\/collections\/storage.oembed","provider":"Funduino","version":"1.0","type":"link"}