{"title":"Servo motors","description":null,"products":[{"product_id":"fs90r-360-micro-servo-getriebemotor","title":"FS90R Micro Servo 360° - continuous rotation, 4.8-6 V, 60 RPM","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eServo motor with 360-degree rotation and slip-ring contacts for continuous rotation\u003c\/li\u003e \u003cli\u003eOperating voltage 4.8 to 6 V, speed approximately 60 revolutions per minute at 5 V\u003c\/li\u003e \u003cli\u003eTorque approximately 1.3 newton meters\u003c\/li\u003e \u003cli\u003ePWM control via standard servo signal, one control signal per motor\u003c\/li\u003e \u003cli\u003eCompact dimensions for space-constrained installations in small robots or mobile models\u003c\/li\u003e \u003cli\u003eUse of common development environments, such as Arduino or MicroPython\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis micro servo with an unlimited range of rotation replaces the angle control of a standard servo with continuous rotation. The slip-ring system enables full 360-degree rotations without mechanical stops. Control is provided via PWM signals using the standard servo protocol, as output by any microcontroller board or conventional servo controller.\u003c\/p\u003e \u003cp\u003eAn operating voltage between 4.8 and 6 volts determines the possible applications. The module connects directly to 5 V logic pins on standard boards; for 3.3 V systems, an external power supply or level shifter is required. The maximum speed of approximately 60 revolutions per minute at optimal voltage and light load enables smooth, controllable movements. The torque of approximately 1.3 newton meters is sufficient for light loads of up to around 200 grams in typical applications.\u003c\/p\u003e \u003cp\u003eApplications include robotics, mobile robots with drive wheels, camera mounts with continuously adjustable panning, and object sorters with rotating mechanisms. Smaller applications, such as miniature gear systems in model kits, also benefit from the compact dimensions.\u003c\/p\u003e \u003cp\u003eThe motor requires an external power supply that operates independently of the control signal. An average 5 V power supply or a battery-powered supply with sufficient capacity is necessary. Loads over approximately 200 grams result in reduced speed and excessive power consumption.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe slip-ring system may generate heat under load; avoid operating at excessively low voltages or with continuous peak loads. The module is not intended for installation in household electrical circuits and is intended exclusively for building prototypes and for testing and development purposes. Work on or near electrical installations must be carried out by a qualified electrician; if in doubt, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x FS90R 360° Micro Servo - Gear Motor\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997812334941,"sku":"F23108874","price":9.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/fs90r-360-micro-servo-getriebemotor-funduino-9808703.jpg?v=1791493524"},{"product_id":"servomotor-typ-es08maii-es08ma2-vgl-mit-emax","title":"ES08MAII servo motor - 1.8 kg·cm, 3.3-6 V, 9 g","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMiniature servo motor with plastic gears for control tasks in model making and robotics projects\u003c\/li\u003e \u003cli\u003eTorque 1.8 kg·cm at 4.8 V\u003c\/li\u003e \u003cli\u003eOperating voltage 3.3 to 6 V\u003c\/li\u003e \u003cli\u003eTravel time 60° in approximately 0.1 seconds\u003c\/li\u003e \u003cli\u003eControl via PWM signal (1000 to 2000 microseconds)\u003c\/li\u003e \u003cli\u003eDimensions 23 * 12 * 29 mm, weight approximately 9 grams\u003c\/li\u003e \u003cli\u003ePlastic gears and metal shaft, standard 3-pin connector\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis servo motor controls movement sequences in compact applications where space is limited while fast, precise positioning commands are required. A plastic gear train converts the motor's power into torque, while the internal electronics receive PWM signals and independently regulate the position.\u003c\/p\u003e \u003cp\u003eThe device operates across a voltage range of 3.3 to 6 V and can therefore be connected directly to microcontroller boards without additional level shifting. The PWM pulse length between 1000 and 2000 microseconds sets the desired angular position; at 1500 microseconds, the shaft is in the center position. A single servo requires only three wires: power, ground, and control signal.\u003c\/p\u003e \u003cp\u003eApplications range from model aircraft and small robot gripper arms to camera pan mechanisms in surveillance setups. The low weight of approximately 9 grams and compact external dimensions also enable assemblies with multiple units. The available torque of 1.8 kg·cm is fully sufficient for propeller adjustment, steering servo functions, or opening and closing mechanisms.\u003c\/p\u003e \u003cp\u003eA power source capable of supplying the required current peaks is necessary, typically a charged battery pack or a regulated power supply rated at approximately 1 A or more. PWM control requires an output with variable pulse duration, which common microcontrollers provide. The servo reaches approximately 60 degrees in 0.1 seconds; this design is not intended for precision applications requiring accuracy to tenths of a degree.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eMoving parts can cause pinching or apply torque without warning; keep hands and long hair away during operation. This device is intended exclusively for prototypes, model making, and development purposes and is not suitable for installation in household systems.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x servo motor type ES08MAII, ES08MA2, comparable to EMAX\u003c\/li\u003e \u003cli\u003e4x control horns \u0026amp; mounting screws\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997814530397,"sku":"F23106821","price":7.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/servomotor-typ-es08maii-es08ma2-vgl-mit-emax-funduino-2050997.png?v=1791494643"},{"product_id":"rad-felge-mit-gummilaufflache-fur-360-servos","title":"Wheel for 360° servo - rim with rubber tread, Ø 60 mm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eRubber tread on a plastic rim, compatible with 360-degree servos\u003c\/li\u003e \u003cli\u003eDiameter 60 mm, width 9 mm\u003c\/li\u003e \u003cli\u003eEnhanced traction through a textured surface\u003c\/li\u003e \u003cli\u003eFor use in mobile robots and powered chassis\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe wheel with a rubber tread mounts onto servos that rotate continuously. The 60 mm diameter provides good traction for compact chassis. The textured rubber surface generates sufficient friction for reliable propulsion on various surfaces.\u003c\/p\u003e \u003cp\u003eWhen directly coupled to a 360-degree servo, the wheel requires no additional mounting beyond the standard servo interface. The 9 mm width fits common servo output shafts and allows for easy push-fitting or screw mounting. Whether used in a rolling robot or a smaller wheel-driven vehicle, this wheel provides the servo with direct power transmission to the driving surface.\u003c\/p\u003e \u003cp\u003eBuilding projects with multiple 360-degree servos is accelerated by the ready-made tread; an expensive gearbox is unnecessary, and the wheel reduces the load on the motor with direct surface grip. However, the limitations are clear, as very high torque, bumps, and lateral compression can damage the rubber structure. On level, moderate surfaces with typical robot weights, the wheel operates reliably.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis component is intended exclusively for building prototypes and robot projects. Working on servo motors and their mounting requires care during mechanical assembly. Before commissioning, ensure that the wheel is securely attached and that there are no sharp edges or holes.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cp\u003e1x wheel \/ rim with rubber tread for 360° servos\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997825638749,"sku":"F23105825","price":1.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/rad-felge-mit-gummilaufflaeche-fuer-360-servos-funduino-9529797.png?v=1791493596"},{"product_id":"hc-020k-schrittzahler-fur-motoren-wheel-encoder","title":"HC-020K encoder - optical speed sensor, 2 pieces, 5 V","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eIncremental encoder for detecting rotations on motor shafts\u003c\/li\u003e \u003cli\u003eDetects up to 20 pulses per revolution\u003c\/li\u003e \u003cli\u003eDigital output on two channels (A and B)\u003c\/li\u003e \u003cli\u003eOperating voltage 5 V\u003c\/li\u003e \u003cli\u003eIncludes mounting ring and adapter sleeves for various shaft diameters\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eAn incremental encoder enables precise measurement of rotational speed and direction on motor shafts. The module detects rotations through optical sensing and outputs the detected pulses on two outputs with different phase positions. This makes it possible not only to calculate the rotational speed but also to determine the direction in which the shaft is rotating.\u003c\/p\u003e \u003cp\u003eThe two outputs enable a resolution of up to 20 pulses per revolution. This level of accuracy allows even small movements to be detected and processed in control applications. The 5 V operating voltage enables direct connection to common microcontroller boards and motor controllers without additional level shifting.\u003c\/p\u003e \u003cp\u003eTypical applications include automated guided vehicles that determine their position using wheel pulses, or robots that control arm movements based on the angle of rotation. The module is also suitable for speed controllers for DC motors. The included adapter sleeves fit various shaft diameters; non-standard shafts require a customized mounting solution.\u003c\/p\u003e \u003cp\u003eThe module requires a stable 5 V power supply and a microcontroller with at least two digital inputs for processing the pulses. An optocoupler or a Schmitt trigger input improves noise immunity but is not strictly required.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe module is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in household electrical circuits. Improper attachment to rotating parts may cause damage to the module or injury; the mounting must be carefully checked before commissioning. If you have questions about integrating it into control applications, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x HC-020K step counter for motors - Wheel Encoder\u003c\/li\u003e \u003cli\u003econsisting of: 1x slotted disc, 1x Wheel Encoder and cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997838844253,"sku":"F23107589","price":3.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/hc-020k-schrittzaehler-fuer-motoren-wheel-encoder-funduino-2280708.png?v=1791494055"},{"product_id":"kamerahalterung-gimbal-mit-zwei-achsen-fur-2x-mg90-servo","title":"Gimbal camera mount - 2 axes for 2x MG90 servo, up to 500 g","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTwo-axis gimbal for stabilizing cameras on drones or mobile robots\u003c\/li\u003e \u003cli\u003eLoad capacity of up to 500 g, suitable for compact and lightweight action cameras\u003c\/li\u003e \u003cli\u003eControl via two separate servo motors (MG9)\u003c\/li\u003e \u003cli\u003ePan range: tilt 90 degrees, yaw 180 degrees\u003c\/li\u003e \u003cli\u003eMounting via quick-release plate or adhesive mounting\u003c\/li\u003e \u003cli\u003ePlastic construction with integrated ball bearings\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eA two-axis gimbal stabilizes cameras using two independently controlled servo motors, removing camera shake during flight or compensating for movements of the carrier platform. The two MG9 motors enable panning movements in tilt and yaw, while a third degree of freedom (roll) remains mechanically fixed. The mount is designed for cameras weighing up to approximately 500 grams.\u003c\/p\u003e \u003cp\u003eThe tilt range covers 90 degrees, while the yaw range reaches 180 degrees. These axis ranges provide the framework for scenarios such as smooth pans over a person being tracked, stable overhead shots while the quadcopter rotates, or gentle camera movements on ground-based platforms. The faster the servos are driven and the more intense the system's base movement, the more the gimbal must compensate through counter-movement.\u003c\/p\u003e \u003cp\u003eTo operate it, two servo control channels are required on the flight controller or robot board, typically using PWM signals (pulse-width modulation). The camera is mounted using a quick-release plate or adhesive mounting; for heavier setups with greater torque, a secure mounting and balancing are recommended. Before operation, the gimbal should be set to the neutral position so that the servos do not move to their end positions while uncalibrated.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eWhen wiring and commissioning the device, the servo motors must not be driven against their mechanical end positions in order to prevent damage. The gimbal is intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x camera mount \/ two-axis gimbal\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997840154973,"sku":"F23106409","price":1.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kamerahalterung-gimbal-mit-zwei-achsen-fuer-2x-mg90-servo-funduino-5301107.jpg?v=1791493648"},{"product_id":"servo-tester-esc-checker-pwm-controller","title":"Servo tester - 3 modes for servo, ESC, and PWM, 4.8-6 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eUniversal tester for servo motors and electronic speed controllers (ESCs)\u003c\/li\u003e \u003cli\u003ePWM control with manual operation via potentiometer\u003c\/li\u003e \u003cli\u003eOperating voltage from 4.8 to 6.0 volts\u003c\/li\u003e \u003cli\u003eThree modes: servo testing, ESC checking, and PWM generation\u003c\/li\u003e \u003cli\u003eCompact, portable design with battery compartment\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis tester tests and controls servo motors and speed controllers directly, without a transmitter or receiver. The device generates standardized PWM signals that can be used to manually adjust servo positions and check ESC functions.\u003c\/p\u003e \u003cp\u003eThree modes enable different applications. In servo mode, the motor's control range is traversed using the potentiometer. ESC mode checks the direction of rotation and performance of speed controllers. In PWM generation mode, a freely adjustable test pulse format is specified. The operating voltage between 4.8 and 6.0 volts is suitable for most common servos and basic controllers; higher voltages require an additional power supply.\u003c\/p\u003e \u003cp\u003eThe device is suitable for troubleshooting in model aircraft, drones, and robot drives before installation in the system. In workshop use, it eliminates the need to fully equip a test setup, allowing servo failures to be checked in isolation. The device is particularly useful when tuning ESC parameters or testing replacement parts.\u003c\/p\u003e \u003cp\u003eFour AA batteries are required for operation; alternatively, an external power supply within the specified voltage range can be connected. The device is intended exclusively as a testing and diagnostic tool and is not designed for continuously driving loads.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis device is intended exclusively for testing and commissioning servo motors and electronic controllers in development and workshop environments. It is not suitable for integration into household electrical circuits or permanent operating equipment. When working on or near power supply systems, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x\u0026nbsp;Servo Tester \/ ESC Checker\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997864337757,"sku":"F23109082","price":3.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/servo-tester-esc-checker-pwm-controller-funduino-8393354.jpg?v=1791493760"},{"product_id":"emax-es08mdii-es08md2-servomotor","title":"EMAX ES08MDII servo motor - mini servo 180°, 4.8-6 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMiniature servo motor for positioning tasks in robotics and model building\u003c\/li\u003e \u003cli\u003eRotation angle up to 180 degrees\u003c\/li\u003e \u003cli\u003eOperating voltage 4.8 to 6 volts\u003c\/li\u003e \u003cli\u003ePWM control via standard servo pulse width\u003c\/li\u003e \u003cli\u003eTorque of 1.9 Newton-centimeters at 5 volts\u003c\/li\u003e \u003cli\u003eFast response time of approximately 0.12 seconds\u003c\/li\u003e \u003cli\u003ePlastic gears with a metal wiper in the potentiometer\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eA miniature servo motor precisely executes positioning commands by controlling position and movement in one plane. The motor automatically adjusts its position using feedback on its current position as soon as a PWM signal specifies the desired angular position. This eliminates the need for separate position monitoring by the user.\u003c\/p\u003e \u003cp\u003eThe motor operates at voltages between 4.8 and 6 volts, with the available torque increasing with the supply voltage. Control is provided via PWM signals in the standard servo format, which is directly available on many microcontroller boards and does not require additional driver electronics. A rotation angle of up to 180 degrees covers most positioning tasks.\u003c\/p\u003e \u003cp\u003eTypical applications include robotics, such as robot arms or grippers, where multiple servo motors coordinate movement sequences. In model aircraft, the motor controls ailerons or landing flaps. In camera pan-tilt mounts, it enables smooth panning movements. In prototypes for automation tasks, it performs fast-reacting switching movements, such as opening and closing valves.\u003c\/p\u003e \u003cp\u003eThe motor requires a separate power supply with sufficient current capacity, as microcontroller boards usually cannot provide enough power for operation and rapid movements. The plastic gears enable compact designs but are not intended for continuous loads involving extreme forces. Repairs to the motor itself are not предусмотрены.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe servo motor is intended exclusively for building prototypes and for testing and development purposes. Fast or powerful movements pose a risk of injury from moving parts; take protective measures where required by the application. A separate power supply with sufficient current capacity is required.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Emax ES08MD Digital Metall Gear Servo\u003c\/li\u003e \u003cli\u003e4x control horns \u0026amp; mounting screws\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997927842141,"sku":"F23106817","price":22.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/emax-es08mdii-es08md2-servomotor-funduino-1667994.png?v=1791493870"},{"product_id":"funduino-mg995-servo-vgl-mit-towerpro-270-version","title":"Funduino MG995 servo - 270°, 10 kg·cm, 4.8-6 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAnalog servo with continuous rotation for motion applications\u003c\/li\u003e \u003cli\u003eTorque of 10 kg·cm at 5 V\u003c\/li\u003e \u003cli\u003eOperating voltage of 4.8 to 6 V\u003c\/li\u003e \u003cli\u003eRotation angle of 270 degrees\u003c\/li\u003e \u003cli\u003eControl signal via standard PWM\u003c\/li\u003e \u003cli\u003eBroad compatibility with common controller boards\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis continuously rotating servo drives mechanisms that require constant rotation instead of moving to a fixed angle like conventional servos. The 270-degree version limits rotation to less than one complete turn. The torque of 10 kg·cm is sufficient for light to medium loads such as joints on robot models, gears, or driven rollers.\u003c\/p\u003e \u003cp\u003eThe servo is controlled via a PWM signal from the controller board. The operating voltage is between 4.8 and 6 V, allowing it to be operated with the output voltage of many single-board computers and microcontroller boards. If the available voltage is too low, the power decreases; voltages above 6 V shorten the service life. A separate power supply for the servo reduces the load on the board's power supply when using multiple servos.\u003c\/p\u003e \u003cp\u003eApplications include vehicle drives for robotic vehicles, stirrers in manipulators, propeller drives in model aircraft, or rotating platforms in project assemblies. Multiple servos can be controlled in parallel via individual digital outputs, provided that the power supply can deliver the total current.\u003c\/p\u003e \u003cp\u003eOperation requires a controller board with PWM-capable digital outputs and a power supply with sufficient current, at least 500 mA per servo. The connector and cable length use the standard RC format; observe the polarity when connecting. Continuous rotation means that this servo cannot be positioned at an absolute angle like a conventional servo.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eEnsure that the power supply voltage is correct and between 4.8 and 6 V. The servo is intended exclusively for building prototypes and for testing and development purposes and is not suitable for connection to household mains wiring.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x TowerPro MG995 Servo - 270 ° Version\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997935870301,"sku":"F23107299","price":6.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/funduino-mg995-servo-vgl-mit-towerpro-270-version-funduino-8849110.png?v=1791495927"},{"product_id":"hc-020k-schrittzahler-fur-motoren-wheel-encoder-1","title":"HC-020K encoder - optical speed sensor, 2 pieces, 5 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOptical encoder for detecting motor speed and position\u003c\/li\u003e \u003cli\u003eSlotted optical switch principle with code disc, generating digital pulses\u003c\/li\u003e \u003cli\u003eConnection via three-pin header (VCC, GND, OUT)\u003c\/li\u003e \u003cli\u003eSupply voltage 4.5 to 5.5 V, detection frequency up to 100 kHz\u003c\/li\u003e \u003cli\u003eCan be connected directly to digital inputs or interrupt pins of microcontrollers\u003c\/li\u003e \u003cli\u003eScope of delivery: two sensor boards, two code discs, connection cable\u003c\/li\u003e \u003cli\u003eEnables simultaneous detection on two motors or wheels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eAn encoder of this type measures the speed and position of rotating shafts through optical pulse detection. The slotted optical switch consists of an infrared emitter diode and a phototransistor positioned opposite each other in a narrow slot. A slotted code disc is attached to the motor shaft and rotates through this slot. With each revolution, the edge of the disc interrupts the light beam several times, and the evaluation electronics convert these interruptions into digital square-wave signals.\u003c\/p\u003e \u003cp\u003eThe output signal is accessed via the third connection and can be connected directly to an interrupt input of a microcontroller, without having to pause the program loop. The current speed is calculated from the pulse frequency and the known number of slots in the code disc. With a supply voltage between 4.5 and 5.5 volts, the module is within the voltage range of common development boards and controllers. The maximum detection frequency of 100 kHz enables the measurement of rapidly rotating shafts.\u003c\/p\u003e \u003cp\u003eThe module is suitable for measuring the speed of DC motors, building encoders for robotic vehicles, and general pulse counting on rotating components. The scope of delivery includes two identical sensor-code disc pairs, allowing the module to be used simultaneously on two wheels of a vehicle to monitor both drive wheels independently or detect slipping and blockages. The sensor can also be used as a simple optical switch for object detection.\u003c\/p\u003e \u003cp\u003eFor operation, the supply voltage and ground must be connected to the pin header. The code discs must be attached to the motor shafts; mechanical coupling is the user's responsibility.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe module is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in household electrical circuits. Beware of rotating parts during operation to prevent crushing and abrasion injuries. If you have questions about the power supply or connection technology, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cp\u003eFor operation, the supply voltage and ground must be connected to the pin header. The code discs must be attached to the motor shafts; mechanical coupling is the user's responsibility.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997950812509,"sku":"F23106792","price":5.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/hc-020k-schrittzaehler-fuer-motoren-wheel-encoder-funduino-8479793.jpg?v=1791495106"},{"product_id":"servohalterung-fur-towerpro-sg90-mg90s-ts90a-emax-es08maii-es08ma2-es08mdii-es08md2","title":"Servo mount for SG90 and MG90s - plastic, 2 mounting points","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlastic bracket for micro servos with a gear shaft\u003c\/li\u003e \u003cli\u003eCompatible with TowerPro SG90 and MG90 s as well as equivalent models\u003c\/li\u003e \u003cli\u003eAttached with screws to the bracket; the servo remains removable\u003c\/li\u003e \u003cli\u003eHole pattern for universal mounting on frames and structures\u003c\/li\u003e \u003cli\u003eTwo mounting points for secure and adjustable positioning\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis plastic bracket enables the secure mounting of micro servos with a gear shaft in robotics and model-building projects. It is suitable for common servo types such as the SG90 and equivalent models, as well as the more robust MG90 s gearbox.\u003c\/p\u003e \u003cp\u003eThe servo is inserted into the bracket from above and secured with mounting screws. The design provides two anchor points that can be used for either tight or adjustable mounting, depending on requirements. The hole pattern allows mounting on standard frames and structures, such as those used in robotic arms, camera pans, and steering applications.\u003c\/p\u003e \u003cp\u003eTypical applications include building robotic arms with multiple controlled axes, pan and tilt mechanisms for sensors, and steering systems in model vehicles. In robotics, the bracket is often used multiple times to create kinematic chains.\u003c\/p\u003e \u003cp\u003eM2 or M2.5 mounting screws are required for installation, depending on the exact hole size of the selected bracket. The servo itself must be purchased separately if it is not already available.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis product is intended exclusively for building prototypes, tests, and development projects. In projects with moving parts, ensure that crushing and shearing points are mitigated by protective devices or safe clearances. Work on or near electrical installations must be carried out by qualified electricians; if anything is unclear, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x servo bracket\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997952876893,"sku":"F23109109","price":1.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/servohalterung-fuer-towerpro-sg90-mg90s-ts90a-emax-es08maii-es08ma2-es08mdii-es08md2-funduino-7879926.png?v=1791495578"},{"product_id":"funduino-mg995-servo-vgl-mit-towerpro-180-version","title":"Funduino MG995 servo - 180°, 13 kg*cm, 4,8-6 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAnalog servo with a 180-degree rotation range\u003c\/li\u003e \u003cli\u003eMaximum torque of 10 kg*cm at 4.8 V, 13 kg*cm at 6 V\u003c\/li\u003e \u003cli\u003eOperating voltage of 4.8 to 6 V\u003c\/li\u003e \u003cli\u003eControl via PWM signal (1–2 ms pulse width)\u003c\/li\u003e \u003cli\u003eConnector in standard servo format (3 pins, signal, GND, +V)\u003c\/li\u003e \u003cli\u003eFast response, robust gears for repeated loads\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe servo is an analog actuator for positioning and torque applications in a range of up to 180 degrees. It is controlled via PWM signals (pulse-width modulation), with a pulse width between 1 and 2 milliseconds determining the target position. Positioning accuracy depends on the stability of the controlling system.\u003c\/p\u003e \u003cp\u003eTorque varies with the operating voltage. At 4.8 V, it is 10 kg*cm; at 6 V, it increases to 13 kg*cm. This makes the servo suitable for light to medium mechanical loads; higher voltages are not supported. The standard connector enables direct connection to common servo connections on microcontroller boards or servo driver modules.\u003c\/p\u003e \u003cp\u003eTypical applications include robot joint control, model aircraft, camera panning, and control valves in prototypes. In model making, the servo enables control of control surfaces or steering axes with high repeatability.\u003c\/p\u003e \u003cp\u003eAn external power supply in the range of 4.8 to 6 V is required for operation. PWM control is provided via a digital pin of the microcontroller, typically at a frequency of 50 Hz. A separate servo driver module is not strictly necessary if the microcontroller can provide sufficient current during idle operation; however, higher loads or multiple servos require an external power supply with sufficient capacity.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe servo is intended exclusively for building prototypes and for testing and development purposes. Do not overload the gears; blockages can cause damage and overheating. If there is no protection against mechanical overload, gears may break.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Funduino MG995 Servo, comparable to TowerPro - 180° Version\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997958283613,"sku":"F23109103","price":5.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/funduino-mg995-servo-vgl-mit-towerpro-180-version-funduino-4668295.png?v=1791496071"},{"product_id":"funduino-mg995-servo-vgl-mit-towerpro-360-version","title":"Funduino MG995 Servo - 360° continuous rotation, 4.8-7.2 V, 15 kg·cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eRotating servo actuator module for robotics and mechanical control tasks\u003c\/li\u003e \u003cli\u003eContinuous-rotation model without end stops, providing full 360-degree rotation\u003c\/li\u003e \u003cli\u003eOperating voltage 4.8 to 7.2 volts, with current consumption depending on load and rotational speed\u003c\/li\u003e \u003cli\u003ePWM control via standard servo signals (50 Hz)\u003c\/li\u003e \u003cli\u003eTorque of up to 15 kg·cm at optimal voltage\u003c\/li\u003e \u003cli\u003eDimensions and weight designed for installation in mobile robots\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis servo is a continuously rotating actuator module that differs from conventional positioning servos by allowing constant rotation in both directions instead. It is used in robot constructions, mobile platforms, and applications requiring the continuous rotation of wheels, shafts, or mechanisms.\u003c\/p\u003e \u003cp\u003eThe module is controlled using standard PWM signals, as supplied by any common microcontroller board. The control pulse width determines the direction and speed of rotation. It requires a power supply between 4.8 and 7.2 volts. Power consumption can be considerable under higher loads or at maximum speed, so the power supply should be adequately rated and should not be powered by the board's power supply.\u003c\/p\u003e \u003cp\u003eTypical applications include drive robots with direct wheel drive, rotating platforms for sensors or cameras, and manipulators with rotating axes. In a mobile platform, for example, two of these servos control the drive wheels, while PWM signals from an Arduino-compatible board enable forward, reverse, and turning movements.\u003c\/p\u003e \u003cp\u003eOperation requires a microcontroller board with PWM-capable digital outputs, a regulated power supply (battery or power adapter) with sufficient current capacity, and mechanical mounting hardware. The maximum limits are determined by the torque and rotational speed, which depend on the available voltage and the mechanical load.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThis module is intended exclusively for building prototypes and for testing and development purposes, and is not suitable for integration into household electrical circuits. During operation, torque and rotating parts can cause crushing injuries or other injuries. A qualified electrician must be consulted when working on the power supply or if there is any uncertainty about commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Funduino MG995 Servo, comparable to TowerPro - 360° version\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998106394973,"sku":"F23108963","price":6.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/funduino-mg995-servo-vgl-mit-towerpro-360-version-funduino-9841434.png?v=1791496167"},{"product_id":"funduino-sg90-servomotor-vgl-towerpro","title":"Funduino SG90 servo motor - 9 g, 180°, 3,5-6 V","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMicro servo motor with ~180° rotation angle, 9 g weight\u003c\/li\u003e \u003cli\u003ePWM control via a single digital pin\u003c\/li\u003e \u003cli\u003eOperating voltage 3.5 to 6 V\u003c\/li\u003e \u003cli\u003eJR connector with integrated signal wire\u003c\/li\u003e \u003cli\u003ePlastic housing with POM gears\u003c\/li\u003e \u003cli\u003eScope of delivery: motor, linkage arm, mounting screws\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis servo motor rotates an output shaft to a specified angle and automatically holds the position. A DC motor drives the shaft via plastic gears, while a potentiometer detects the current position. The internal control electronics adjusts the motor until the desired position is reached.\u003c\/p\u003e \u003cp\u003eThe control signal is sent via PWM over a single signal wire; a digital output from a microcontroller is sufficient. The pulse length directly determines the rotation angle. All three wires (power, signal, ground) run through the JR-compatible connector, so only one plug connection is required.\u003c\/p\u003e \u003cp\u003eThe low weight of 9 g and compact size enable use in lightweight mechanisms such as camera mounts, model vehicle steering systems, or robotics prototypes. The stall torque is not sufficient for permanently high loads or continuous rotation.\u003c\/p\u003e \u003cp\u003eOperation is possible at voltages between 3.5 and 6 V. Connection to 5 V microcontroller boards is possible, as is connection to 4.8 V battery packs in model vehicles. If you work with 3.3 V systems, you should check the lower voltage limit, as performance decreases there.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eIncorrect polarity can damage the servo; check the connector pin assignment before connecting it. The gears can be damaged by overloading or a jammed shaft; do not turn the shaft against its stop. This product is intended exclusively for building prototypes and for testing and development purposes, not for continuous operation in household power circuits.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eFunduino SG90 servo motor (cf. TowerPro)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998294876509,"sku":"F23107201","price":2.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/funduino-sg90-servomotor-vgl-towerpro-funduino-4116288.png?v=1791496607"},{"product_id":"funduino-standard-38g-servo-bauform-wie-sg5010","title":"Funduino standard servo 38 g - 180°, 4,8-6 V, 3,7 kg\/cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAnalog servo with a standard form factor for positioning tasks in model building and prototype development\u003c\/li\u003e \u003cli\u003eRotation range from 0 to 180 degrees, positioning time of approximately 0.19 seconds at full load\u003c\/li\u003e \u003cli\u003eOperating voltage: 4.8 to 6 volts\u003c\/li\u003e \u003cli\u003ePWM control signal (pulse-width modulation) via a standard servo connector\u003c\/li\u003e \u003cli\u003eMaximum load of approximately 3.7 kilograms with a 1-centimeter lever arm\u003c\/li\u003e \u003cli\u003ePlastic housing with plastic gears, dimensions of approximately 40*20*37 millimeters\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis analog servo responds to PWM signals and positions its output shaft according to the pulse pattern. Its rotation range of 0 to 180 degrees covers most standard applications.\u003c\/p\u003e \u003cp\u003eThe positioning time of approximately 0.19 seconds indicates the response speed at full load. The servo requires an operating voltage of 4.8 to 6 volts and can be connected directly to the PWM outputs of common microcontroller boards. It works with the standard logic levels of these boards without additional driver electronics.\u003c\/p\u003e \u003cp\u003eTypical applications include steering mechanisms in moving models, flaps and rudder controls in aircraft models, gripper arms in robotics prototypes, and simple rotational movements for visualizing sensor values. The maximum transferable load is approximately 3.7 kilograms with a simple lever arm, allowing you to quickly determine the system's limits.\u003c\/p\u003e \u003cp\u003eThe servo is supplied with a standard servo connector; depending on the overall setup, a separate power source in the 4.8 to 6 volt range must be available. Simultaneous movement of multiple servos requires a powerful power supply, as each active servo draws peak currents.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe servo is intended exclusively for building prototypes and for testing and development purposes and is not suitable for continuous operation in an uncontrolled environment. When operating more than one servo or using automated movement sequences, ensure an adequate power supply to prevent voltage drops. Before using the servo in applications with potential hazards, observe the applicable safety requirements.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Funduino Standard 38G Servo, form factor similar to SG5010\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998300479837,"sku":"F23106433","price":4.97,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/funduino-standard-38g-servo-bauform-wie-sg5010-funduino-2743845.png?v=1791495491"},{"product_id":"tiankongrc-ts90a-servo-3-3v","title":"TIANKONGRC TS90 A micro servo motor - 3,3-6 V, 1,5 kg·cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAnalog micro servo motor with plastic gears\u003c\/li\u003e \u003cli\u003eOperating voltage 3.3 to 6 V, torque up to 1.5 kg\/cm at 6 V\u003c\/li\u003e \u003cli\u003eControl via PWM signal (standard servo pulse)\u003c\/li\u003e \u003cli\u003eRotation angle 180 to 200 degrees, counterclockwise rotation\u003c\/li\u003e \u003cli\u003e3-pin connector for ground, voltage, and control signal\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis servo motor is controlled via PWM signals and is suitable for precise positioning tasks in RC models, robots, and moving mechanisms. The pulse duration determines the target position of the output shaft, while an internal plastic gear train transfers the power from the drive motor to the output shaft.\u003c\/p\u003e \u003cp\u003eThe operating voltage is between 3.3 and 6 V. Higher voltage increases both rotational speed and torque; at 4.8 V, the motor reaches 110 rpm and 1.3 kg\/cm, while at 6 V it reaches 130 rpm and 1.5 kg\/cm. The control system operates analogously, with the motor continuously adjusting its current position to the applied PWM signal.\u003c\/p\u003e \u003cp\u003eThe rotation range is 180 to 200 degrees counterclockwise. Typical applications include steering functions in model vehicles, rudder control in model aircraft, swiveling camera mounts, and robot arms. When stationary, the servo requires only a few milliamps, but power consumption increases significantly under load or when the shaft is blocked.\u003c\/p\u003e \u003cp\u003eConnection is made via a 3-pin connector with separate wires for ground, supply voltage, and control signal. The increased power consumption under load should be taken into account when designing the power supply.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eWhen directly connected to 5 V logic outputs of a microcontroller board, the servo's control signal may exceed its 3.3 V level; a level shifter is then required. This product is intended exclusively for building prototypes, tests, and development projects and is not suitable for operation in fixed installations or domestic electrical installations.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x TIANKONGRC TS90A Servo - 3.3V\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998357856605,"sku":"F23107286","price":3.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/tiankongrc-ts90a-servo-33v-funduino-9150836.png?v=1791496473"},{"product_id":"mg90s-metallgetriebe-micro-servo","title":"MG90S micro servo - metal gears, 2 kg·cm, 4.8-6 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMicro servo motor with metal gears for precise positioning\u003c\/li\u003e \u003cli\u003eControl via PWM signal (standard servo pulse)\u003c\/li\u003e \u003cli\u003eRotation angle up to 180°\u003c\/li\u003e \u003cli\u003eStall torque 2 kg\/cm at 4.8 V\u003c\/li\u003e \u003cli\u003e3-wire cable with JR-compatible connector\u003c\/li\u003e \u003cli\u003eOperating voltage 4.8 V\u003c\/li\u003e \u003cli\u003eCable length 24 cm\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis servo motor with metal gears rotates its output shaft through an angle of up to 180° and positions it precisely according to a PWM control signal. An internal control loop compares the pulse width of the control signal with the actual shaft position and adjusts the motor until the desired position is reached.\u003c\/p\u003e \u003cp\u003eThe 4.8 V power supply is provided through two wires of the three-pin connection cable, while the third wire carries the control signal. The JR-compatible connector plugs directly into receiver boards used in model making and can also be connected to PWM-capable outputs of microcontrollers. The metal gears provide a stall torque of 2 kg\/cm and enable more robust power transmission than plastic gears.\u003c\/p\u003e \u003cp\u003eThe motor is suitable for applications involving mechanical loads, such as panning small cameras, moving robot grippers, or controlling model vehicles and aircraft. Since the control system complies with the standard servo protocol, common servo libraries for microcontroller platforms can be used without additional electronics.\u003c\/p\u003e \u003cp\u003eOperation requires a 4.8 V power source and a microcontroller or controller with a PWM-capable signal output. The 24 cm cable length determines the maximum distance between the servo motor and the control board.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis product is intended exclusively for building prototypes and for testing and development purposes. When connecting and operating the product, ensure that the power supply polarity is correct; incorrect connections may cause damage. If you are unsure about integrating the product into a larger system, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x MG90S metal gear micro servo\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998409630045,"sku":"F23107470","price":4.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/mg90s-metallgetriebe-micro-servo-funduino-5431341.png?v=1791496528"},{"product_id":"56-mm-rad-fur-micro-servo-sg90-sg92-mg90-servo-wheel-fur-robotik-modellbau","title":"Wheel for micro servo - Ø 56 mm, SG92, MG90","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlastic wheel for common micro servos with a 4 mm shaft diameter\u003c\/li\u003e \u003cli\u003eDiameter 56 mm, suitable for SG90, SG92, and MG90 servos\u003c\/li\u003e \u003cli\u003eFastened with four flat-head screws\u003c\/li\u003e \u003cli\u003eSuitable for mobility applications and mechanical drives\u003c\/li\u003e \u003cli\u003ePlastic material with black-and-white coloring\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis 56-millimeter wheel connects common micro servos directly to mechanical loads. The 4-millimeter shaft diameter fits the motor shafts of SG90, SG92, and MG90 servos. It is fastened with four flat-head screws that keep the wheel centered and create a secure connection without an additional coupling.\u003c\/p\u003e \u003cp\u003eThe plastic wheel is suitable for vehicle-like constructions in which two or four wheels are driven by four different servos. It can also be used as a drive wheel for elevators or as a rotary drive for measuring instruments. The black-and-white coloring enables optical speed measurement, for example in control projects.\u003c\/p\u003e \u003cp\u003eThe limits of the servo used apply during operation. The wheel itself can only carry the load supplied by the motor. At higher torques, plastic wheels may slip or wear; metal alternatives are required for such applications. The wheel is supplied without mounting hardware and requires four M2 or M2.5 screws for attachment.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eDuring operation, the rotating wheel can catch hair, clothing, or fingers. Do not touch moving parts during operation. The product is intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1× 56 mm servo wheel for SG90\/SG92\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66042598195549,"sku":"F23110462","price":1.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/3607-F23110462_01.png?v=1791497912"},{"product_id":"master-linearaktuator-wie-hydraulikzylinder-12v-150mm-20n-40n-60n-120n","title":"12 V Linear Actuator - 150 mm Stroke, IP54, 20-120 N","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eElectric linear actuator, 12 V DC\u003c\/li\u003e \u003cli\u003eStroke ranges and force vary depending on the variant\u003c\/li\u003e \u003cli\u003eDC motor with threaded drive\u003c\/li\u003e \u003cli\u003eIP54 protection against dust and splashing water\u003c\/li\u003e \u003cli\u003eSelectable fast-stroke mode for increased speed\u003c\/li\u003e \u003cli\u003eIntegrated limit switches\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe linear actuator moves loads in a straight line via an electrically driven lead screw. Its design follows the operating principle of a hydraulic cylinder, but it uses 12 V DC instead of hydraulic fluid. A three-phase brake secures the end position without a power supply.\u003c\/p\u003e \u003cp\u003eWhen current flows, a DC motor rotates the threaded nut while the rod can extend and retract linearly. Limit switches automatically interrupt the power supply when the maximum stroke is reached. Depending on the version, the stroke length and available force vary; choosing the right variant is particularly important for heavy loads.\u003c\/p\u003e \u003cp\u003eThe actuator is suitable for lifting tables, adjustable chairs and beds, storage management systems with access to multiple levels, or workshop carts with height-adjustable work surfaces. Such drives are also used in the manufacture of prostheses or medical devices.\u003c\/p\u003e \u003cp\u003ePower consumption depends on the load and stroke speed. In fast-stroke mode, the available force is reduced. Operation requires a 12 V power source with sufficient current capacity and a control relay or contactor to switch the motor and direction. The IP54 protection rating has limitations in cases of direct exposure to water or in dusty environments.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis linear actuator is intended exclusively for use in laboratory setups, prototypes, and testing and development projects. The component is not intended for operation in stationary systems or continuous production use and is not suitable for integration into household electrical installations. When working on the power supply or if you are unsure about the correct control method, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x linear actuator \/ lift rod, depending on the variant\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"with additional mounting holes \/ 20 N \/ 30 mm\/s","offer_id":66042951270749,"sku":"F23107365","price":47.27,"currency_code":"EUR","in_stock":true},{"title":"with additional mounting holes \/ 60 N \/ 8 mm\/s","offer_id":66046899290461,"sku":"F23107360","price":47.27,"currency_code":"EUR","in_stock":true},{"title":"with additional mounting holes \/ 120 N \/ 4 mm\/s","offer_id":66046902370653,"sku":"F23107364","price":47.27,"currency_code":"EUR","in_stock":true},{"title":"with additional mounting holes \/ 40 N \/ 15 mm\/s","offer_id":66046905549149,"sku":"F23107369","price":47.27,"currency_code":"EUR","in_stock":true},{"title":"without additional mounting holes \/ 20 N \/ 30 mm\/s","offer_id":66048232259933,"sku":"F23105720","price":47.27,"currency_code":"EUR","in_stock":true},{"title":"without additional mounting holes \/ 60 N \/ 8 mm\/s","offer_id":66046899257693,"sku":"F23107359","price":47.27,"currency_code":"EUR","in_stock":true},{"title":"without additional mounting holes \/ 120 N \/ 4 mm\/s","offer_id":66046906499421,"sku":"F23107370","price":47.27,"currency_code":"EUR","in_stock":true},{"title":"without additional mounting holes \/ 40 N \/ 15 mm\/s","offer_id":66046633967965,"sku":"F23107373","price":47.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-linearaktuator-wie-hydraulikzylinder-12v-150mm-20n-40n-60n-120n-funduino-6161713.png?v=1791499506"},{"product_id":"master-mikro-linearantrieb-hubstange-8mm-o-5-10mm-s-3-6v-30-40mm-hub","title":"Micro linear actuator - Ø 8 mm lift rod, 3-6 V, various stroke lengths","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eLinear actuator with push rod, electromagnetic drive\u003c\/li\u003e \u003cli\u003eStroke lengths from 5 to 10 mm\u003c\/li\u003e \u003cli\u003eOperating voltage 3 to 6 V\u003c\/li\u003e \u003cli\u003eOperating current approx. 30 mA\u003c\/li\u003e \u003cli\u003eAvailable in several variants\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA linear actuator with a push rod converts electrical energy into linear motion. The device uses an electromagnetic principle to move a rod out of its rest position and retract it again. With operating voltages between 3 and 6 V, the actuator is suitable for battery-powered systems and small electronic projects, as no separate power supply with higher voltages is required.\u003c\/p\u003e \u003cp\u003eThe linear actuator operates with low power consumption of approximately 30 mA. Depending on the version, the push rod extends between 5 and 10 mm, which is sufficient for compact mechanisms and limited space requirements. The voltage range enables direct operation from battery packs, DC power sources, or microcontroller boards with suitable outputs.\u003c\/p\u003e \u003cp\u003eExamples of applications include remote-controlled models with mechanical functions, automated closures in boxes or enclosures, lifting mechanisms in prototypes, or rotating and folding operations in model making. The actuator can also be used as a component in test and development setups to perform repeated linear movements without requiring motors with gear-based conversion.\u003c\/p\u003e \u003cp\u003eThis actuator is not designed for longer stroke lengths or faster motion sequences. Control via switches, relays, or digital outputs of a microcontroller is possible provided that the control circuit has sufficient current capacity. Thermal load should be taken into account during continuous operation.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe linear actuator is not intended for installation in the household power circuit. The device is intended exclusively for building prototypes and for testing and development purposes. Before commissioning it at higher voltages or in connection with electrical installation systems, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cp\u003e1x Micro linear actuator \/ push rod, 8mm Ø, 5~10mm\/s, 3-6V - optionally 30 or 45 mm stroke\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"30 mm stroke ","offer_id":66042956874077,"sku":"F23107515","price":34.71,"currency_code":"EUR","in_stock":true},{"title":"45 mm stroke","offer_id":66045743595869,"sku":"F23107618","price":34.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-mikro-linearantrieb-hubstange-8mm-oe-510mms-3-6v-30-40mm-hub-funduino-6204825.jpg?v=1791485563"},{"product_id":"master-emax-es08ma2-es08maii-es08ma-ii-micro-rc-servo-metallgetriebe","title":"EMAX ES08MA II micro servo - metal gears, 4.8-6 V, 2 directions of rotation","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMicro servo with metal gears for RC models and robotics\u003c\/li\u003e \u003cli\u003eOperating voltage 4.8 to 6 V (dual-action operation possible)\u003c\/li\u003e \u003cli\u003eControl range 60°, response time approximately 0.1 seconds\u003c\/li\u003e \u003cli\u003eConnection via standard servo connector with signal wire\u003c\/li\u003e \u003cli\u003eWeight under 10 g, compact design\u003c\/li\u003e \u003cli\u003eMetal gears for higher continuous loads\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis micro servo precisely drives small mechanisms and is used in RC models, robotics projects, and automation systems. The servo receives control signals via a signal wire and converts them into continuous positioning movements. With metal gears, it operates more durably and withstands higher loads than plastic versions without adding significant weight.\u003c\/p\u003e \u003cp\u003eThe servo requires a supply voltage between 4.8 and 6 V; both values are common, so it can be operated with 5 V logic boards as well as 6 V power supplies. The response time of approximately 0.1 seconds is sufficient for smooth movement sequences. The 60° control range covers steering mechanisms as well as lever or slider functions.\u003c\/p\u003e \u003cp\u003eTypical applications include rudder controls in aircraft models, camera alignment in drone frames, grippers or clamps in small robot arms, and moving components in prototypes. In a four-channel RC model, this servo could control wing elevons or rudders, while a central receiver controls all four servos via separate signal wires.\u003c\/p\u003e \u003cp\u003eThe servo connects to the controlling microcontroller or receiver via a single signal wire; accordingly, more outputs on the controller are sufficient for multiple servos. An external power supply should have sufficient capacity, as all controlled servos may demand their peak current simultaneously. Mechanical overloading caused by excessive torque requirements can lead to gear failure or blockage.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe servo is not intended for operation in household electrical circuits. It is intended exclusively for use in prototypes, testing, and development. When installing or modifying live components, or if you have questions about safe power supply, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1× EMAX ES08MA2 \/ ES08MAII \/ ES08MA II Servo (CW or CCW depending on the selected variant)\u003c\/li\u003e \u003cli\u003e4× control horns + mounting screws\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Reverse","offer_id":66043946762589,"sku":"F23105779.1","price":11.63,"currency_code":"EUR","in_stock":true},{"title":"Normal","offer_id":66045760766301,"sku":"F23105779","price":11.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-emax-es08ma2-es08maii-es08ma-ii-micro-rc-servo-metallgetriebe-funduino-1231725.png?v=1791473724"},{"product_id":"grove-kabel-fur-servo-4p-stecker-grove-hy-2-0-auf-3p-buchse-5er-set","title":"Grove servo cable - 4P HY-2.0 plug to 3P socket, set of 5","description":"\u003ch2\u003eGrove - Servo Branch Cable\u003c\/h2\u003e \u003cp\u003e4-pin connector (Grove HY-2.0) to 3-pin jumper cable for connecting a servo to the Grove system or connecting other components without a Grove socket.\u003c\/p\u003e \u003ch3\u003eDescription\u003c\/h3\u003e \u003cp\u003eThe cable enables the connection of, for example, a Grove Servo to other connectors (breadboards, etc.) that support 4 pins. Suitable for directly connecting Grove modules to Arduino. The pin headers are compatible with a 2.54 mm pitch.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat is Grove?\u003c\/strong\u003e\u003cbr\u003eGrove makes connecting and experimenting easier and simplifies the prototyping process. No jumpers or soldering are required. More than 300 Grove modules have been developed, covering a wide range of applications and meeting a variety of requirements. Not only the hardware but also the software is open source. We offer various Grove Shields to enable connections to the Grove system with various microcontrollers.\u003c\/p\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGrove servo special: Suitable for Grove Servo or other requirements.\u003c\/li\u003e \u003cli\u003e4-pin connector jumper, convertible into a 3-pin connector jumper branch cable.\u003c\/li\u003e \u003cli\u003eGrove Unified Socket: \"Plug and Play\" for versatile applications.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eCompatible with the Grove servo series: RB-421, MG-995, SG-90, SG-5010.\u003c\/p\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eLength: 20 cm\u003c\/li\u003e \u003cli\u003eWeight: 32 g\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePackage contents\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGrove - Servo Branch Cable: 5 pieces\u003c\/li\u003e \u003c\/ul\u003e","brand":"Seeedstudio","offers":[{"title":"Default Title","offer_id":66044552872285,"sku":"F23109303","price":3.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/grove-kabel-fuer-servo-4p-stecker-grove-hy-20-auf-3p-buchse-5er-set-funduino-7272480.jpg?v=1791488902"},{"product_id":"servo-c05cls-5g","title":"C05CLS micro servo - 5 g, 0.39 kg\/cm, 4.8-6 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAnalog servo weighing 5 g\u003c\/li\u003e \u003cli\u003eTorque 0.39 kg\/cm (3.8 N·m)\u003c\/li\u003e \u003cli\u003eOperating voltage 4.8 to 6 V\u003c\/li\u003e \u003cli\u003eControl signal via PWM (pulse-width modulation)\u003c\/li\u003e \u003cli\u003eMetal gears and plastic housing\u003c\/li\u003e \u003cli\u003eDimensions 23 * 12 * 23 mm\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eAn ultralight analog servo is suitable wherever weight is critical and precise movements need to fit into small spaces. Typical applications include control surfaces on model aircraft, steering in mini robots, or flap mechanisms that need to respond quickly. The servo is controlled via a PWM signal from microcontroller boards or receivers, making it compatible with common robotics and model-building controllers.\u003c\/p\u003e \u003cp\u003eThe metal gearbox withstands frequent repeated loads for a long time. With a maximum torque of 0.39 kg\/cm, the servo can lift light loads and move small control surfaces against low resistance; with heavier loads or high inertia, movement becomes slower or may stall. The operating voltage is between 4.8 and 6 V; operation with 5 V logic is unproblematic, but it will not start reliably on 3.3 V systems or battery voltages below 4.8 V.\u003c\/p\u003e \u003cp\u003eIn model aviation, the servo is used for pitch control or flaps, while in ground-based models it is used for steering. In autonomous small robots, it controls grippers or lever arms. An aircraft controller with stabilization functionality needs approximately one such servo per control surface; multiple servos run in parallel on different PWM outputs of a controller.\u003c\/p\u003e \u003cp\u003eThe servo is supplied without a connector; the signal cable and power supply must be soldered or fitted with connectors. An external power supply for the servo is required if the microcontroller cannot provide sufficient current. Depending on the application, the servo may be exposed to high mechanical loads that cause wear; a replacement should be kept on hand.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe servo is operated with direct current and is not intended for installation in or connection to household electrical systems. It is intended exclusively for building prototypes and for testing and development purposes. Improper wiring with reversed polarity or overvoltage will damage the electronics; if in doubt, consult someone with electronics expertise before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Servo C05CLS - 5g (including screws)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66044950610269,"sku":"F23107768","price":11.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/servo-c05cls-5g-funduino-2924883.jpg?v=1791488423"},{"product_id":"master-mikro-linearantrieb-hubstange-8mm-o-3-5mm-s-3-6v-30-bis-130mm-hub","title":"Micro linear actuator - 8 mm diameter lift rod, 3-6 V","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eLinear actuator with push rod, electromagnetically operated\u003c\/li\u003e \u003cli\u003eStroke of up to 8 mm, speed of 3.5 mm\/s\u003c\/li\u003e \u003cli\u003eOperating voltage 3.6 V\u003c\/li\u003e \u003cli\u003eAvailable in several versions with different strokes and speeds\u003c\/li\u003e \u003cli\u003eCompact design for space-constrained applications\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA linear actuator converts electrical energy into straight-line forward motion. This model with a 3.6 V operating voltage works with batteries or power supplies for electronics prototypes. The push rod extends and retracts incrementally, allowing positioning operations without gears or racks.\u003c\/p\u003e \u003cp\u003eThe electromagnetic coil pulls the rod in when current flows, while a spring pushes it back when the power is off. This provides a simple, reliable source of motion that can be controlled without additional electronics. The low operating voltage enables direct connection to microcontroller outputs or low-voltage switching stages.\u003c\/p\u003e \u003cp\u003eApplications range from mechanical locks and latches to valve actuation and positioning tasks in measuring instruments. It can be used to create a door opener for cages or containers, as well as a simple sample dispenser for dosing liquids or powders. The compact size fits into enclosures where space is limited.\u003c\/p\u003e \u003cp\u003eThe actuator is connected via wire leads or flat connectors. The available variants differ in stroke and speed, allowing you to select the suitable version depending on the requirements of the task. Repetition rates of up to approximately 2 Hertz are common; continuous operation requires temperature monitoring.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eNot intended for installation in household mains circuits. Suitable exclusively for building prototypes and for testing and development purposes. Work on or near electrical installations requires a qualified electrician; if you are unsure about commissioning, consult a qualified electrician before starting.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Micro linear actuator \/ push rod, 8mm Ø, 3~5mm\/s, 3-6V - stroke length depending on the selected variant\u003c\/li\u003e \u003cli\u003eIncludes mounting screws, spacers, joint bracket and cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"30 mm","offer_id":66044963160413,"sku":"F23105801","price":26.39,"currency_code":"EUR","in_stock":false},{"title":"100 mm","offer_id":66046516986205,"sku":"F23107530","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"80 mm","offer_id":66046409703773,"sku":"F23107685","price":34.44,"currency_code":"EUR","in_stock":false},{"title":"130 mm","offer_id":66046310777181,"sku":"F23107755","price":54.44,"currency_code":"EUR","in_stock":false},{"title":"50 mm","offer_id":66046385520989,"sku":"F23107745","price":30.31,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-mikro-linearantrieb-hubstange-8mm-oe-35mms-3-6v-30-bis-130mm-hub-funduino-6294534.png?v=1791473920"},{"product_id":"digitaler-servo-motor-jst-1-0mm-1-7g-260","title":"Digital servo motor - JST 1.0 mm connector, 260°, 6 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDigital servo with a width of 10 mm and a weight of 17 g\u003c\/li\u003e \u003cli\u003eTorque of 4.8 Nm at an operating voltage of 6 V\u003c\/li\u003e \u003cli\u003eControl signal via PWM with JST connector\u003c\/li\u003e \u003cli\u003eFast response through digital control\u003c\/li\u003e \u003cli\u003eDesign suitable for tight spaces\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe digital servo is a compact actuator for precise angular positioning in models and robotics applications. At just 10 mm wide and weighing 17 g, it fits into designs where larger servo motors would take up too much space. A JST connector enables easy connection to control boards without soldering.\u003c\/p\u003e \u003cp\u003eThe component operates digitally rather than analogically, allowing the control system to respond more quickly to PWM signals and providing greater positioning accuracy. At an operating voltage of 6 V, the maximum torque is 4.8 Nm. When operating at 5 V, however, you should expect somewhat lower torque. This makes the motor flexible for use with various power supplies for microcontroller boards.\u003c\/p\u003e \u003cp\u003eTypical projects include camera mounts in drone models, where weight is critical, and joint control in lightweight robotic structures. The compact servo is also frequently used in model aircraft or boats, where several servos need to work together without overloading the battery.\u003c\/p\u003e \u003cp\u003eThe motor can be controlled directly by common microcontroller boards. Pulse-width modulation (PWM) is required for angular control, along with a stable power supply of 6 V or 5 V. For projects with multiple servos, the power supply should be generously dimensioned to prevent voltage drops under load.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis servo is intended exclusively for building prototypes and for testing and development purposes. The mechanical forces generated by the component may cause injuries if it is installed incorrectly. Rotating shafts and gears must be secured so that contact with body parts is prevented.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Digital servo motor JST 1.0mm, 1.7g, 260°, incl. screws\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045155836253,"sku":"F23107641","price":11.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/digitaler-servo-motor-jst-10mm-17g-260-funduino-2176438.jpg?v=1791488837"},{"product_id":"digitaler-micro-servo-2g-180-jst-1-0mm","title":"Funduino Micro digital servo - 180°, 2 g, JST 1.0 mm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTiny digital servo with a 180-degree range of motion\u003c\/li\u003e \u003cli\u003ePrecisely sets positions with position feedback\u003c\/li\u003e \u003cli\u003ePower supply via JST connector, control via PWM signal\u003c\/li\u003e \u003cli\u003eDimensions 10 * 10 * 23 mm, weight approximately 2 grams\u003c\/li\u003e \u003cli\u003eDigital control allows multiple servos to be connected to just a few controller pins\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis digital micro servo offers extremely compact dimensions for projects with limited installation space. Weighing just two grams and measuring 10 * 10 * 23 mm, the servo fits into even the smallest mechanisms. Digital control via PWM signals allows multiple servos to be controlled sequentially using just a few controller pins, greatly simplifying the wiring.\u003c\/p\u003e \u003cp\u003eThe servo sets positions within a 180-degree range and uses digital position feedback to reliably move to and hold the requested angles. This enables stable, precise operation without recalibration. Power is supplied via the integrated JST connector and must be provided separately.\u003c\/p\u003e \u003cp\u003eTypical applications include camera gimbals in drones and model aircraft, where weight is critical, as well as robotic grippers with multiple axes of movement. The servo can also be used as a control element in compact model vehicles or for positioning sensors in confined spaces.\u003c\/p\u003e \u003cp\u003eOperation requires a microcontroller board with PWM outputs and a suitable power source. The JST connection must be compatible with the existing cables; otherwise, rewiring is necessary.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe servo is intended exclusively for building prototypes and for testing and development purposes. It is not suitable for permanent installation in power supply systems. Ensure that the power supply polarity is correct to prevent damage. If you are unsure about integrating the servo into the overall system, consult a qualified electrician before commissioning.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045177889117,"sku":"F23105785","price":12.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/digitaler-micro-servo-2g-180-jst-10mm-funduino-4314655.jpg?v=1791488544"},{"product_id":"servo-controller-servomotor-treiberplatine-32-kanal","title":"32-channel servo controller - driver board, 32-bit CPU, 4.2-7.2 V","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e32-channel servo control board with independent 32-bit CPU\u003c\/li\u003e \u003cli\u003eMemory for up to 256 action groups, playable without a power supply\u003c\/li\u003e \u003cli\u003eControl via USB-C, UART, Bluetooth, Wi-Fi, or PS2 controller\u003c\/li\u003e \u003cli\u003eServo voltage 4.2–7.2 V, can be powered separately from the control system\u003c\/li\u003e \u003cli\u003eGalvanically isolated servo signals protect the logic from reverse current\u003c\/li\u003e \u003cli\u003eColor-coded pin headers for clear wiring of the 32 channels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA servo control board with its own CPU decouples the control of multiple servomotors from the main controller. Instead of wiring each servo individually to an Arduino, ESP32, or Raspberry Pi, this board handles the simultaneous control of up to 32 motors. This saves the main system considerable processing power and connections.\u003c\/p\u003e \u003cp\u003eControl is provided via four different channels: USB-C to a PC at 115200 baud, UART or Bluetooth at 9600 baud, Wi-Fi, or directly via a PS2 controller. The internal 16 MB flash memory buffers up to 256 action groups, allowing programmed motion sequences to run without an active connection. The board itself operates at 3.3 V, while the electronics require a 5 V operating voltage and the connected servos are powered separately with 4.2 to 7.2 V. Galvanic isolation of the servo signals prevents reverse currents from the motors from damaging the control logic.\u003c\/p\u003e \u003cp\u003eThe board can be used anywhere multiple servomotors need to be moved in coordination. Multi-axis robotic arms, hexapod or other multi-legged robots, complex motion sequences in animatronics, and other robotics projects with extensive servo choreography can be controlled and preprogrammed with it.\u003c\/p\u003e \u003cp\u003eAn external power supply with sufficient capacity for all connected servos is required for operation. Control from a PC is carried out using Windows 7-compatible or newer software for programming the action groups. The control voltage levels are not compatible with standard 5 V logic inputs when external sensors are to be connected.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe control board is intended exclusively for use in prototypes, tests, and development projects, and not for installation in household electrical systems or operation at mains voltage. Damage may occur at servo currents above 10 A per channel or total currents beyond the power supply limit; size the external power supply accordingly. If you have questions about the correct power supply or wiring, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Servo controller \/ servomotor driver board, 32-channel\u003c\/li\u003e \u003cli\u003e1x USB-C cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045238903133,"sku":"F23107833","price":34.8,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/servo-controller-servomotor-treiberplatine-32-kanal-funduino-1629090.png?v=1791488576"},{"product_id":"arduino-motor-engineering-kit-motors-backup-education","title":"Arduino Engineering Kit Motors Backup - 3 replacement motors for R2","description":"\u003ch2 id=\"product-details-information-tab-0\" class=\"product-details-information-tab-content-panel active\" data-action=\"pushable\" data-id=\"product-details-information-0\" data-pusher=\"sc-pushable-xs\"\u003eOverview\u003c\/h2\u003e \u003cdiv class=\"product-details-information-tab-content-panel active\" data-action=\"pushable\" data-id=\"product-details-information-0\" data-pusher=\"sc-pushable-xs\"\u003eThe Arduino Engineering Kit R2 contains all the components that students need to complete their projects. However, we know that the motors can sometimes burn out, break, or simply get lost in the excitement of using the kit.\u003cbr\u003e\u003cbr\u003eThe Engineering Kit - Motors Backup contains all the replacement motors that students need to complete their projects. This kit contains only motors for the Arduino Engineering Kit.\u003cbr\u003e\u003cbr\u003eWhat is included in the kit?\u003cbr\u003eThe Engineering Kit - Motors Backup contains a servo motor, a geared motor with encoder, and a micro DC motor with encoder. Each of these exclusive motors is required to build the projects in the Arduino Engineering Kit R2.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e \u003cdiv id=\"product-details-information-tab-1\" class=\"product-details-information-tab-content-panel \" data-action=\"pushable\" data-id=\"product-details-information-1\" data-pusher=\"sc-pushable-xs\"\u003e \u003ch2 class=\"product-details-information-tab-content-panel-title\"\u003eTechnical specifications\u003c\/h2\u003e \u003cdiv id=\"product-details-information-tab-content-container-1\" class=\"product-details-information-tab-content-container\" data-type=\"information-content-text\"\u003e \u003ch3\u003eServo\u003c\/h3\u003e \u003ctable style=\"height: 78px; width: 371px;\" border=\"0\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eModel designation\u003c\/td\u003e \u003ctd\u003eGS-9025MG\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating voltage range\u003c\/td\u003e \u003ctd\u003e4.8 - 6V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eStall torque\u003c\/td\u003e \u003ctd\u003e2.3 kg\/cm (4.8V)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eControl system\u003c\/td\u003e \u003ctd\u003ePositive PWM control 1500 u\/sec Neutral\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e \u003c\/p\u003e \u003ch3\u003eDC motor with encoder\u003c\/h3\u003e \u003ctable style=\"height: 78px; width: 359px;\" border=\"0\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eModel designation\u003c\/td\u003e \u003ctd\u003eTRK-370CA-17260-51V-EN\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating voltage range\u003c\/td\u003e \u003ctd\u003e12 V DC\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eStall current\u003c\/td\u003e \u003ctd\u003e1.85A Ref\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eEncoder output pulse\u003c\/td\u003e \u003ctd\u003e12 PPR\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003e\n\u003cbr\u003e MicroGeared DC Motor with Encoder\u003c\/h3\u003e \u003ctable style=\"height: 97px; width: 370px;\" border=\"0\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eModel designation\u003c\/td\u003e \u003ctd\u003eGM12-N20VA-08225-100-EN\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput voltage\u003c\/td\u003e \u003ctd\u003e3.5 - 16V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput current\u003c\/td\u003e \u003ctd\u003e5 mA\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eEncoder output pulse\u003c\/td\u003e \u003ctd\u003e3 PPR\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eGear ratio\u003c\/td\u003e \u003ctd\u003e100\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e \u003c\/div\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":66045252796765,"sku":"F23110616","price":45.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/arduino-motor-engineering-kit-motors-backup-education-funduino-4451758.jpg?v=1791487975"},{"product_id":"mini-servo-c02cls-2g","title":"C02CLS Mini Servo - 2 g, 180 Degrees, 4,8-6 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMiniature servo with analog control\u003c\/li\u003e \u003cli\u003eWeight: 2 g, travel range: 180 degrees\u003c\/li\u003e \u003cli\u003eOperating voltage: 4.8 to 6 V\u003c\/li\u003e \u003cli\u003eConnector and wires already installed\u003c\/li\u003e \u003cli\u003eSuitable for micro-robots and model aircraft\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis 2-gram servo is a precision servo for applications with strict weight requirements. Analog control is provided via pulse-width modulation; typically, a pulse length of 1 to 2 milliseconds determines the servo horn position. The 180-degree travel range extends from full deflection to the left, through the center position, to full deflection to the right.\u003c\/p\u003e \u003cp\u003eThe servo requires an operating voltage between 4.8 and 6 V, often supplied by a battery or battery pack for wireless models. Since the connector and connecting wires are already installed, no wiring is required. It can be controlled by a microcontroller board with a PWM output or by standard servo controllers.\u003c\/p\u003e \u003cp\u003eTypical applications include rudder control in micro-drones or model aircraft, toothed-belt and cable drives in robots, and folding mechanisms, such as those for camera housings or grippers. It can also be used to create head movements in animal or humanoid robots, provided that high force is not required.\u003c\/p\u003e \u003cp\u003ePower supply is important. A separate, stabilized power supply or a battery within the correct voltage range is required. The PWM control pin can be connected directly to 3.3 V or 5 V logic. Overdriving the servo or continuously loading it beyond 2 g will shorten the service life of the servo gears.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe servo motor shaft may rotate unexpectedly when power is applied. Keep fingers and loose clothing away. The module is intended exclusively for building prototypes and for testing and development purposes and is not suitable for connection to the household electrical circuit.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Servo C02CLS - 2g (including screws)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045377315165,"sku":"F23107697","price":12.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/mini-servo-c02cls-2g-funduino-2062406.jpg?v=1791489082"},{"product_id":"jr-futaba-servo-verlangerung-kabel-10cm-female-male","title":"Servo extension cable 10 cm - JR-Futaba, female to male","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable for model-building servos, 10 cm long\u003c\/li\u003e \u003cli\u003eSocket to plug (female-to-male)\u003c\/li\u003e \u003cli\u003eJR-standard plug connection\u003c\/li\u003e \u003cli\u003eSuitable for Futaba-compatible systems\u003c\/li\u003e \u003cli\u003eCan be used in both directions\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis extension cable connects model-building servos to a receiver or servo output over a distance of 10 centimeters. The female socket fits onto the male servo plug, while the male end connects to a compatible socket.\u003c\/p\u003e \u003cp\u003eThe JR format is standard for Futaba and is also used by many other manufacturers, so the cable works with all correspondingly equipped boards and receivers. For longer servo cable runs or servo positions located far apart in a model, the cable reliably bridges the distance between the controller and actuator.\u003c\/p\u003e \u003cp\u003eThe cable can be used in either direction as needed: a servo can be positioned closer to the receiver, or, conversely, the receiver can be positioned closer to the servo. No additional power supply or configuration is required for operation.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for testing and development purposes in model building and is not suitable for installation in household power circuits or vehicles with mains voltage. Twisted or faulty plug connections can cause malfunctions or damage; check the plug polarity before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JR-FUTABA servo extension cable 10cm, female \/ male\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045502816605,"sku":"F23108007","price":1.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/jr-futaba-servo-verlaengerung-kabel-10cm-female-male-funduino-7931607.png?v=1791490506"},{"product_id":"micro-servo-c017cls-1-7g","title":"C017CLS micro servo - 1.7 kg-cm, 0-180°, 4.8-6 V","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMicro servo with control signal connection\u003c\/li\u003e \u003cli\u003eOperating voltage 4.8 to 6 V\u003c\/li\u003e \u003cli\u003ePlug-in module for standard RC servo connectors\u003c\/li\u003e \u003cli\u003eMicro design weighing 7 g\u003c\/li\u003e \u003cli\u003eTorque up to 1.7 kg-cm\u003c\/li\u003e \u003cli\u003eRotation range 0 to 180 degrees\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis micro servo is an actuator for remote control via digital control signals. It is powered with a voltage between 4.8 and 6 V and accepts pulse-width modulation. The standard RC plug connection allows it to be connected to common servo drivers and remote control receivers without additional adapters.\u003c\/p\u003e \u003cp\u003eThe servo rotates its output between 0 and 180 degrees depending on the pulse duration. The 1.7 kg-cm torque is sufficient to actuate ailerons, rudders, or flaps on model aircraft and to switch light mechanical systems. Weighing 7 g, it adds minimal weight to the overall mass and also fits into confined installation spaces.\u003c\/p\u003e \u003cp\u003eThe servo is used in RC airplanes, helicopters, and boats where actuators need to be controlled precisely. It can also be used for mechanical control in lightweight robotics projects and model-making applications. For longer operating periods, the power supply should be dimensioned separately, especially when several servos move simultaneously or operate under continuous load.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe servo is intended exclusively for prototyping, testing, and development purposes and is not suitable for installation in household electrical circuits. When working with or in the immediate vicinity of electrical installations, a qualified electrician must be consulted. Reversed polarity at the connector can cause damage, so check the connecting cable before connection.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Servo C017CLS - 1.7g (including screws)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045612097885,"sku":"F23107702","price":11.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/micro-servo-c017cls-17g-funduino-3746682.jpg?v=1791490256"},{"product_id":"wdkj-d3009-300-grad-servo-wasserdicht","title":"WDKJ D3009 servo - waterproof, 300°, 15 kg·cm, 4.8-7.2 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWaterproof servo with a 300-degree rotation range\u003c\/li\u003e \u003cli\u003eTorque of 15 kg·cm at 6 V\u003c\/li\u003e \u003cli\u003eOperating voltage: 4.8 to 7.2 V\u003c\/li\u003e \u003cli\u003eConnection via standard connector\u003c\/li\u003e \u003cli\u003eMetal gears and sealed shaft\u003c\/li\u003e \u003cli\u003eSuitable for outdoor and humid environments\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis waterproof servo rotates continuously through 300 degrees and is suitable for outdoor or humid environments. The fully sealed housing with metal gears and sealed shaft protects against moisture and corrosion, while the standard connection cable can be connected to all common microcontroller boards.\u003c\/p\u003e \u003cp\u003eThe servo requires a supply voltage between 4.8 and 7.2 V and delivers a torque of 15 kg·cm within this range. This combination allows operation with both rechargeable batteries and laboratory power supplies. Higher voltages will damage the servo and are not permitted.\u003c\/p\u003e \u003cp\u003eThe servo can be used, for example, in weather station prototypes for controlling wind flaps, in mobile robots with joints, or in camera pans for outdoor projects. Its waterproof design is also a decisive advantage for irrigated model vehicles with continuous movements. The 300-degree range allows panning movements instead of the limited deflection possible with standard servos.\u003c\/p\u003e \u003cp\u003eA power supply in the range of 4.8 to 7.2 V is required for operation. No qualified electrician is required as long as the setup is limited to low voltage and no household electrical circuits are involved.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe servo is intended exclusively for building prototypes and for testing and development purposes. A voltage above 7.2 V will cause damage. Work on or near electrical installations must be carried out by qualified electricians; if you are unsure about the power supply, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x WDKJ D3009 300° servo with accessory set (servo horns, screws, etc.)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045613343069,"sku":"F23108755","price":18.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/wdkj-d3009-300-grad-servo-wasserdicht-funduino-7393717.png?v=1791490087"},{"product_id":"servo-spt5435-90-120-180-wasserdicht","title":"SPT5435 Servo - Waterproof, Metal Gears, 20 kg·cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDigital servo with waterproof housing\u003c\/li\u003e \u003cli\u003eTorque of 20 kg·cm at 6 V, 27 kg·cm at 8 V\u003c\/li\u003e \u003cli\u003e90°, 120°, or 180° travel version\u003c\/li\u003e \u003cli\u003eOperating voltage 4.8 to 8.4 V\u003c\/li\u003e \u003cli\u003ePWM control via standard servo connector\u003c\/li\u003e \u003cli\u003eMetal gears designed for high loads\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis waterproof digital servo is controlled via standard PWM signals and is suitable for applications where moisture or direct exposure to water is unavoidable. Depending on the version, it offers a travel range of 90°, 120°, or 180°.\u003c\/p\u003e \u003cp\u003eThe torque depends on the operating voltage and ranges from 20 kg·cm at 6 V to 27 kg·cm at 8 V. Digital control enables precise positioning without continuous pulses. The metal gears withstand high loads and repeated movements, making this servo suitable for demanding projects.\u003c\/p\u003e \u003cp\u003eTypical applications include outdoor robotic applications, model boats and amphibious vehicles, as well as motion mechanisms in damp environments. Its waterproof design also makes it interesting for irrigation or watering systems, where it can serve as a valve actuator.\u003c\/p\u003e \u003cp\u003eOperation requires a PWM-capable control board, such as a microcontroller board, and a power supply in the range of 4.8 to 8.4 V with sufficient current capacity for the desired load. A fuse in the power line is recommended.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe servo must not be used for installation in household electrical circuits. It is intended exclusively for building prototypes and for testing and development purposes. Work on or near electrical installations must be carried out by qualified electricians; if you are unsure about the power supply, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eServo SPT5435 90°-120°, 180° - Waterproof\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045626777949,"sku":"F23107835","price":27.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/servo-spt5435-90-120-180-wasserdicht-funduino-1024193.png?v=1791489763"},{"product_id":"master-servo-motor-extrem-stark-12-24v-winkel-oder-rotation","title":"Servo motor 12-24 V - high torque, angle or rotation, 120-380 kg","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eServo motor for angular or rotary movements with operating voltages of 12 V and 24 V\u003c\/li\u003e \u003cli\u003eHigh force output for load-bearing applications\u003c\/li\u003e \u003cli\u003eAvailable in multiple sizes\u003c\/li\u003e \u003cli\u003eControlled via standard servo signals or continuous speed control, depending on the version\u003c\/li\u003e \u003cli\u003eRobust design for industrial and project setups\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis servo motor generates high torque and is suitable for applications requiring angular positioning or continuous rotational movement under load. The choice between 12 V and 24 V operating voltage adapts to existing power supplies and enables different performance classes without additional converters.\u003c\/p\u003e \u003cp\u003eDepending on the selected version, the motor operates either as a conventional servo with position control or as a high-torque drive for continuous rotary movements. The robust construction ensures reliable operation even in harsh environments and with frequent switching cycles.\u003c\/p\u003e \u003cp\u003eThe motor is used in machine tool construction, robotics projects, gates and valve drives, as well as test benches where high forces are required in a compact design. It is also suitable for remote-controlled vehicle models with demanding steering tasks or for lifting platforms in laboratory setups.\u003c\/p\u003e \u003cp\u003eFor operation, in addition to a suitable power supply (12 V or 24 V, current consumption depending on the load and version), suitable control electronics and possibly braking resistors are required. The exact electrical limits for current and continuous torque can be found in the individual versions.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis product is not intended for installation in household electrical circuits and is exclusively intended for building prototypes and for testing and development purposes. High torque creates a risk of crushing and shearing at moving parts; appropriate protective devices are required. Work on or near electrical installations is reserved for qualified electricians; if anything is unclear, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Extremely powerful servo motor 12-24V - Angle or rotation. Force according to selection\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"120Kg","offer_id":66045630841181,"sku":"F23106649","price":57.93,"currency_code":"EUR","in_stock":true},{"title":"180Kg","offer_id":66045771514205,"sku":"F23106651","price":71.75,"currency_code":"EUR","in_stock":true},{"title":"260Kg","offer_id":66045770891613,"sku":"F23106650","price":71.75,"currency_code":"EUR","in_stock":true},{"title":"380Kg","offer_id":66045774823773,"sku":"F23106633","price":87.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-servo-motor-extrem-stark-12-24v-winkel-oder-rotation-funduino-2247429.png?v=1791476685"},{"product_id":"servo-tester-esc-checker-stv2-3","title":"Servo tester STV2.3 - ESC checker, 8 channels, 50-250 Hz","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eUniversal tester for servos and Electronic Speed Controllers (ESCs) with up to 8 channels\u003c\/li\u003e \u003cli\u003e1200 mAh battery capacity for mobile testing without an external power supply\u003c\/li\u003e \u003cli\u003eSignal injection from 50-250 Hz, adjustable via potentiometer\u003c\/li\u003e \u003cli\u003eServo testing for functionality, neutral position, and range of motion\u003c\/li\u003e \u003cli\u003eESC testing with rotation direction control and throttle activation without a propeller\u003c\/li\u003e \u003cli\u003eConnection compatibility with standard servo connectors and BEC power supply\u003c\/li\u003e \u003cli\u003eCompact design for field testing and workshop use\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis servo tester checks drive electronics without additional hardware. The device injects PWM signals in the range of 50 to 250 Hz to test servos and Electronic Speed Controllers at their actual operating point.\u003c\/p\u003e \u003cp\u003eServos are tested for functionality, correct neutral position, and full range of motion. The integrated potentiometer continuously controls the control signal, making movements and response behavior immediately visible. Electronic Speed Controllers can be tested without an attached propeller by checking the rotation direction and throttle activation.\u003c\/p\u003e \u003cp\u003eThe internal 1200 mAh battery enables on-site testing without connecting an external power supply. With up to eight channels testable simultaneously, the device also covers more complex systems. Compatibility with standard servo connectors usually eliminates the need for adapters.\u003c\/p\u003e \u003cp\u003eApplications include quick field diagnostics of RC models, maintenance before field testing, adjusting new controllers, and checking repaired components without complete assembly. Only the charged device itself is required for operation. The battery should be charged several times a year before extended storage to compensate for self-discharge.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis device is intended exclusively for testing servo drives and speed controllers during development, prototyping, and maintenance. Rotating components and shafts during ESC tests can cause injuries; perform tests without mounted propellers or wheels. Work on the power supply or high-energy batteries should, if in doubt, be carried out with the assistance of a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Servo Tester \/ ESC Checker STV2.3\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045646635357,"sku":"F23109058","price":7.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/servo-tester-esc-checker-stv23-funduino-6283927.png?v=1791491033"},{"product_id":"high-power-servo-asmc-04b-180kgcm","title":"ASMC-04B Servo - 180 kg·cm, 4.8-7.2 V, metal gears","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDigital servo with a maximum torque of 180 kg·cm\u003c\/li\u003e \u003cli\u003eControl via standard PWM (1–2 ms pulse width)\u003c\/li\u003e \u003cli\u003eOperating voltage 4.8–7.2 V\u003c\/li\u003e \u003cli\u003eRotation speed of 0.16 s\/60° at 6 V\u003c\/li\u003e \u003cli\u003eStandard servo connector, compatible with common servo connections\u003c\/li\u003e \u003cli\u003eMetal gears and reinforced bearing bushings for high loads\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis high-power servo provides 180 kg·cm of torque and is suitable for mechanical loads that would overwhelm other servos. It is controlled via PWM signals in the standard 1–2 ms range, as provided by common controller boards and receivers.\u003c\/p\u003e \u003cp\u003eThe servo is powered by an operating voltage of 4.8–7.2 V. At 6 V, it achieves a response speed of 0.16 s per 60° of rotation. The robust metal gear construction withstands continuous loads without wear; the reinforced bearing bushings remain secure even at high torques.\u003c\/p\u003e \u003cp\u003eApplications include robotics projects involving considerable leverage, such as gripper arms, tilting mechanisms, or swivel frames, as well as models with load-bearing functions. Its high torque also makes it suitable as a steering servo in mobile platforms with a large turning radius.\u003c\/p\u003e \u003cp\u003eExternal power within the specified voltage range is required for operation; current consumption under load exceeds 5 A and requires a suitably rated power supply. The servo is supplied without accessories; adapter parts and mounting brackets must be purchased separately.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe servo must not be connected to the household electrical supply. It is intended exclusively for prototype construction as well as testing and development purposes. The high torque presents a crushing and shearing hazard; the mechanism must not be touched or blocked during operation.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045650567517,"sku":"F23108492","price":69.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/high-power-servo-asmc-04b-180kgcm-funduino-7502792.png?v=1791490757"},{"product_id":"jr-futaba-servo-verlangerungskabel-20cm-female-male","title":"Servo extension cable - JR-Futaba, 20 cm, female-to-male","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eExtension cable for RC servos, 20 cm long\u003c\/li\u003e \u003cli\u003eFemale connector to male connector\u003c\/li\u003e \u003cli\u003eStandard JR\/Futaba servo connector format\u003c\/li\u003e \u003cli\u003ePre-assembled and ready for immediate use\u003c\/li\u003e \u003cli\u003eEnables flexible cable routing between the controller and servo\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis extension cable connects RC servo controllers to servo motors and bridges distances of up to 20 centimetres. The cable uses the JR\/Futaba connector format, eliminating the need for reconnection or soldering when assembling model-building projects.\u003c\/p\u003e \u003cp\u003eThe pre-assembled design means that the cable is ready for immediate use after unpacking. For longer distances between the controller and servo, or when multiple servos are controlled in a star configuration from a central point, the required total cable length can be achieved by combining several extension cables.\u003c\/p\u003e \u003cp\u003eThe cable is used in RC aircraft, helicopters, drones and remote-controlled vehicles, where it is routed between the receiver and the control servos for the elevator, rudder and ailerons. It also enables a practical arrangement without cable clutter on stationary test benches for servo motors.\u003c\/p\u003e \u003cp\u003eA receiver or controller with a JR\/Futaba servo socket is required. In larger setups, cable lengths from around 50 centimetres should be checked to ensure that signal attenuation remains within the permissible range and that the servo is controlled reliably.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis cable is intended exclusively for assembling model-building projects and prototypes. It must not be connected to the household power circuit or a building's electrical installation. If there is any uncertainty about the correct connection or use in larger systems, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JR-FUTABA servo extension cable 20cm, female \/ male\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045658726749,"sku":"F23107994","price":1.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/jr-futaba-servo-verlaengerungskabel-20cm-female-male-funduino-6305877.jpg?v=1791492306"},{"product_id":"gs-1502-1-5g-linearservo-fur-rc-modelle-2er-set","title":"GS-1502 Linear Servo - 2-piece set, 20 mm travel, 1.5 kg, 4.8-6 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTwo 5 g linear servos for RC models\u003c\/li\u003e \u003cli\u003eSpring-loaded 20 mm stroke\u003c\/li\u003e \u003cli\u003eMaximum thrust force of 1.5 kg\u003c\/li\u003e \u003cli\u003eOperating voltage of 4.8 to 6 V\u003c\/li\u003e \u003cli\u003eConnection via standard servo connector\u003c\/li\u003e \u003cli\u003eResponse time of approximately 0.5 s at 4.8 V\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe linear servo is designed for precise control of flaps, landing gear, or other linear extension mechanisms in model building. The gearbox converts the motor's rotation into linear motion, allowing it to travel approximately 20 mm forward and backward around a neutral point. The spring-loaded return to the neutral position ensures that the mechanism returns to its initial position even without active control.\u003c\/p\u003e \u003cp\u003eWith a thrust force of 1.5 kg, it can open and close a landing flap on smaller aircraft models or extend the nose landing gear. The connection voltage of 4.8 to 6 V is compatible with common RC receivers and flight battery voltage levels; below 4.8 V, the thrust force decreases, while above 6 V, the gearbox may be damaged. The servo responds to control signals with a delay of approximately half a second, which is sufficient for smooth functional movements but noticeable during very fast model maneuvers.\u003c\/p\u003e \u003cp\u003eThe set contains two identical servos; for symmetrical tasks such as controlling both ailerons on an aircraft model or both wheels of a steering axle in a car, they can be synchronized. The servo only requires the control signal line and power supply from the RC receiver for operation; no additional devices or programs are needed.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe servos are intended exclusively for model building and testing purposes. Do not use them in actuators for building or industrial automation systems. Powering them above 6 V poses a fire hazard; check that the battery is connected correctly with the polarity observed before closing the circuit.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e2x GS-1502 - 1.5g linear servo for RC models\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045659087197,"sku":"F23106991","price":20.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gs-1502-15g-linearservo-fuer-rc-modelle-2er-set-funduino-7734864.png?v=1791492408"},{"product_id":"farbskala-fur-servomotoren-kompatibel-mit-towerpro-emax","title":"Servo Motor Color Scale - SG90, MG90S, with Pointer","description":"\u003ch2 data-start=\"166\" data-end=\"226\"\u003e\u003cstrong data-start=\"166\" data-end=\"226\"\u003eColor scale for servomotors (SG90, MG90S \u0026amp; compatible models)\u003c\/strong\u003e\u003c\/h2\u003e \u003cp data-start=\"166\" data-end=\"226\"\u003e\u003cstrong data-start=\"166\" data-end=\"226\"\u003eVisualization made easy - rotation at a glance\u003c\/strong\u003e\u003c\/p\u003e \u003cp data-start=\"228\" data-end=\"528\"\u003eThis color scale was specially developed for use with standard servomotors such as the \u003cstrong data-start=\"309\" data-end=\"317\"\u003eSG90\u003c\/strong\u003e, \u003cstrong data-start=\"319\" data-end=\"328\"\u003eMG90S\u003c\/strong\u003e and similar models. It enables a \u003cstrong data-start=\"384\" data-end=\"437\"\u003eclear, visual representation of the motor's rotational movement\u003c\/strong\u003e - ideal for training, prototyping or use in interactive projects.\u003c\/p\u003e \u003ch3 data-start=\"228\" data-end=\"528\"\u003eAdvantages at a glance:\u003c\/h3\u003e \u003cul data-start=\"565\" data-end=\"1206\"\u003e \u003cli data-start=\"565\" data-end=\"731\"\u003e \u003cp data-start=\"567\" data-end=\"731\"\u003e\u003cstrong data-start=\"570\" data-end=\"608\"\u003eMake rotational movement visible:\u003c\/strong\u003e The high-contrast colors make the servo's rotation immediately apparent - ideal for analysis and teaching.\u003c\/p\u003e \u003c\/li\u003e \u003cli data-start=\"565\" data-end=\"731\"\u003e \u003cp data-start=\"567\" data-end=\"731\"\u003e\u003cstrong data-start=\"737\" data-end=\"766\"\u003eDetermine the angle of inclination:\u003c\/strong\u003e The scale helps you read and document precise angle changes.\u003c\/p\u003e \u003c\/li\u003e \u003cli data-start=\"846\" data-end=\"991\"\u003e \u003cp data-start=\"848\" data-end=\"991\"\u003e\u003cstrong data-start=\"851\" data-end=\"883\"\u003eFlexible applications:\u003c\/strong\u003e Whether in education, DIY projects or the laboratory - the color scale adapts to your requirements.\u003c\/p\u003e \u003c\/li\u003e \u003cli data-start=\"992\" data-end=\"1206\"\u003e \u003cp data-start=\"994\" data-end=\"1206\"\u003e\u003cstrong data-start=\"996\" data-end=\"1011\"\u003eWith pointer:\u003c\/strong\u003e A sturdy pointer is included and can be mounted directly on the servo horn using the screw included with the servos - no additional mounting hardware required.\u003c\/p\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct details:\u003c\/h3\u003e \u003cul data-start=\"1233\" data-end=\"1574\"\u003e \u003cli data-start=\"1233\" data-end=\"1311\"\u003e \u003cp data-start=\"1235\" data-end=\"1311\"\u003e\u003cstrong data-start=\"1235\" data-end=\"1254\"\u003eCompatibility:\u003c\/strong\u003e Suitable for SG90, MG90S and compatible 9g servomotors\u003c\/p\u003e \u003c\/li\u003e \u003cli data-start=\"1312\" data-end=\"1402\"\u003e \u003cp data-start=\"1314\" data-end=\"1402\"\u003e\u003cstrong data-start=\"1314\" data-end=\"1326\"\u003eMounting:\u003c\/strong\u003e Easy to attach - color scale on the housing, pointer on the servo horn\u003c\/p\u003e \u003c\/li\u003e \u003cli data-start=\"1403\" data-end=\"1508\"\u003e \u003cp data-start=\"1405\" data-end=\"1508\"\u003e\u003cstrong data-start=\"1405\" data-end=\"1418\"\u003eMaterial:\u003c\/strong\u003e Durable, lightweight plastic or self-adhesive version (depending on the model)\u003c\/p\u003e \u003c\/li\u003e \u003cli data-start=\"1509\" data-end=\"1574\"\u003e \u003cp data-start=\"1511\" data-end=\"1574\"\u003e\u003cstrong data-start=\"1511\" data-end=\"1522\"\u003eDesign:\u003c\/strong\u003e Multicolored, easy to read\u003c\/p\u003e \u003c\/li\u003e \u003cli data-start=\"1509\" data-end=\"1574\"\u003e\n\u003cstrong\u003eBoard dimensions:\u003c\/strong\u003e 69 x 68 x 2 mm\u003c\/li\u003e \u003cli data-start=\"1509\" data-end=\"1574\"\u003e\n\u003cstrong\u003eDimensions of the cutout for the servomotor:\u003c\/strong\u003e 23 x 13 mm\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications:\u003c\/h3\u003e \u003cul data-start=\"1598\" data-end=\"1726\"\u003e \u003cli data-start=\"1598\" data-end=\"1623\"\u003e \u003cp data-start=\"1600\" data-end=\"1623\"\u003eRobotics \u0026amp; mechatronics\u003c\/p\u003e \u003c\/li\u003e \u003cli data-start=\"1624\" data-end=\"1661\"\u003e \u003cp data-start=\"1626\" data-end=\"1661\"\u003eTechnical education \u0026amp; STEM projects\u003c\/p\u003e \u003c\/li\u003e \u003cli data-start=\"1662\" data-end=\"1697\"\u003e \u003cp data-start=\"1664\" data-end=\"1697\"\u003eMotion analysis \u0026amp; calibration\u003c\/p\u003e \u003c\/li\u003e \u003cli data-start=\"1698\" data-end=\"1726\"\u003e \u003cp data-start=\"1700\" data-end=\"1726\"\u003eInteractive installations\u003c\/p\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eScope of delivery:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1* Color scale for servomotors - Compatible with TowerPro, EMAX, ...\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045664788829,"sku":"F25110802","price":2.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/farbskala-fuer-servomotoren-kompatibel-mit-towerpro-emax-funduino-7818814.jpg?v=1791491050"},{"product_id":"master-elektrische-schubstange-hubstange-linearantrieb-6v-12v","title":"Linear actuator - push rod 6 V and 12 V","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eElectric linear actuator with push rod, 6 V DC\u003c\/li\u003e \u003cli\u003eStroke available in several versions\u003c\/li\u003e \u003cli\u003eOperating current approximately 0.5 to 1 A, depending on the design\u003c\/li\u003e \u003cli\u003eSimple two-point control via relay or transistor\u003c\/li\u003e \u003cli\u003eCompact design for model making and simple automation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe linear actuator converts electricity into linear motion by using a magnet inside a coil to push and pull a rod. The device operates with 6 V DC and requires an operating current of approximately 0.5 to 1 A, depending on the version; the required power supply must therefore be dimensioned accordingly.\u003c\/p\u003e \u003cp\u003eWhen connected to the power supply, the actuator is controlled via a relay or transistor, making it easy to control the direction of movement. The stroke varies depending on the model, allowing you to select the right version for different stroke lengths. Calibration is not required.\u003c\/p\u003e \u003cp\u003eTypical applications include simple model-making projects such as remote-controlled folding mechanisms, actuating switches or flaps using timer relays or sensors, and hobby automation projects where a short, powerful linear movement is required. The compact design fits into confined spaces, for example beneath a model aircraft wing for actuating control surfaces.\u003c\/p\u003e \u003cp\u003eOperation requires a power supply with at least 6 V DC and sufficient current capacity. A relay or transistor is also required for control if the actuator is not intended to remain switched on continuously. Use is limited to prototypes, tests, and project setups.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis linear actuator is intended exclusively for building prototypes and for testing and development purposes and is not designed for installation in household electrical circuits. Ensure the 6 V power supply is connected with the correct polarity during operation. Work on or near electrical installations must be carried out by qualified electricians; if in doubt, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Electric push rod \/ lift rod \/ linear actuator - 6V \/ 12V\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"45mm, 6V","offer_id":66045667541341,"sku":"F23108255","price":21.49,"currency_code":"EUR","in_stock":true},{"title":"45mm, 12V","offer_id":66045784916317,"sku":"F23108253","price":21.49,"currency_code":"EUR","in_stock":true},{"title":"90mm, 6V","offer_id":66045784850781,"sku":"F23108254","price":24.19,"currency_code":"EUR","in_stock":true},{"title":"90mm, 12V","offer_id":66045784588637,"sku":"F23108256","price":24.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-elektrische-schubstange-hubstange-linearantrieb-6v-12v-funduino-8272018.png?v=1791488808"},{"product_id":"servo-tester-esc-checker-im-metallgehause","title":"Servo tester and ESC checker - metal housing, PWM 50-200 Hz","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eServo tester and ESC checker in a robust metal housing\u003c\/li\u003e \u003cli\u003eTests servomotors and electronic speed controllers (ESCs) independently of the control unit\u003c\/li\u003e \u003cli\u003ePWM signal generator with a frequency range of 50 to 200 hertz\u003c\/li\u003e \u003cli\u003ePower supply via 2S to 3S lithium-polymer batteries (7.4 to 11.1 volts)\u003c\/li\u003e \u003cli\u003eOperation via rotary control and LED status indicator\u003c\/li\u003e \u003cli\u003eServo travel and neutral position can be checked without external hardware\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eA servo tester and ESC checker with a metal housing tests servomotors and electronic speed controllers directly for proper operation, without requiring a radio-control receiver or other control unit to be connected. The device generates PWM signals in the 50 to 200 hertz frequency range and outputs them to the device under test.\u003c\/p\u003e \u003cp\u003eThe rotary control allows the pulse width to be adjusted continuously, enabling you to check servo travel and the neutral position or adjust ESC speed settings. The LED status indicator shows whether the device is active and outputting the signal. This makes it quick to determine whether a servo is no longer responding, a controller is defective, or the mechanical load has become too high.\u003c\/p\u003e \u003cp\u003eThe tester is powered by 2S to 3S lithium-polymer batteries with a voltage between 7.4 and 11.1 volts. This eliminates the need to activate a complete radio-control system or set up a separate power supply for testing. In model aircraft, drones, or robotics projects, it saves time during troubleshooting in the workshop or on site.\u003c\/p\u003e \u003cp\u003eThe metal housing protects the electronics from impact damage that can occur during portable use. Only a suitable lithium-polymer battery is required for operation; the necessary connection cables for the servo or ESC are usually already attached to the tester.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis tester is intended exclusively for testing and development purposes. When working with lithium-polymer batteries, observe their safety instructions, particularly those concerning charging and storage. Not intended for connection to household power circuits.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Servo Tester \/ ESC Checker in metal housing\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045669998941,"sku":"F23108368","price":8.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/servo-tester-esc-checker-im-metallgehaeuse-funduino-8220935.png?v=1791492575"},{"product_id":"grove-servo","title":"Grove servo motor - angular positioning, 0.12 s\/60°","description":"\u003ch2\u003eGrove Servo Product Description\u003c\/h2\u003e \u003cp\u003eThe Grove Servo is a rotary actuator for precise angular positioning. Ideal for closed-loop systems with exact position control. With a Grove standard connector for easy plug-and-play without cable clutter.\u003c\/p\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eHigh accuracy: Closed-loop control of position, speed, and torque.\u003c\/li\u003e \u003cli\u003eHigh stability: Stable operation at low speed (0.12\/0.16 s\/60°).\u003c\/li\u003e \u003cli\u003eEasy to use: Compatible with the Grove port, simply plug and play.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eRobotics\u003c\/li\u003e \u003cli\u003ePrinting equipment\u003c\/li\u003e \u003cli\u003ePackaging equipment\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eTechnical Details\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDimensions: 60 mm x 60 mm x 14.5 mm\u003c\/li\u003e \u003cli\u003eWeight: 12.5 g\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eWhat is Grove?\u003c\/h3\u003e \u003cp\u003eGrove makes connecting and experimenting easier and simplifies the prototyping process. No jumpers or soldering are required. More than 300 Grove modules have been developed, covering a wide range of applications and meeting a variety of requirements. Not only the hardware but also the software is open source. We offer various Grove shields to enable connections to the Grove system with a range of microcontrollers.\u003c\/p\u003e \u003ch3\u003ePackage Contents\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGrove - Servo: 1\u003c\/li\u003e \u003cli\u003eGrove cable: 1\u003c\/li\u003e \u003cli\u003eServo horn: 3\u003c\/li\u003e \u003cli\u003eScrews: 3\u003c\/li\u003e \u003c\/ul\u003e","brand":"Seeedstudio","offers":[{"title":"Default Title","offer_id":66045674062173,"sku":"F23106324","price":5.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/grove-servo-funduino-5532650.png?v=1791492270"}],"url":"https:\/\/funduino.com\/en\/collections\/servomotors.oembed","provider":"Funduino","version":"1.0","type":"link"}