{"title":"Mechanics (3D printing)","description":null,"products":[{"product_id":"gewindespindel-300mm-t8-2-d-8mm-2mm-steigung-gewindestange","title":"T8-2 lead screw - 300 mm, Ø 8 mm, 2 mm pitch","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTrapezoidal lead screw for linear movements, 300 mm effective length\u003c\/li\u003e \u003cli\u003eNominal diameter 8 mm, pitch 2 mm, thread type ACME (T8)\u003c\/li\u003e \u003cli\u003e8 mm diameter screw end for bearing support and drive coupling\u003c\/li\u003e \u003cli\u003eDesigned for precision and rigidity to enable repeatable positioning\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe trapezoidal lead screw is a machine element for converting rotary motion into linear motion and serves as a central component in positioning devices, 3D printers, measuring instruments, and laboratory automation systems. With an ACME thread (T8 profile), it achieves high efficiency and self-locking properties.\u003c\/p\u003e \u003cp\u003eWith a pitch of 2 mm, the nut moves axially by this distance per revolution. The 8 mm nominal diameter provides sufficient load capacity for typical applications with loads in the single- to double-digit kilogram range. The effective length of 300 mm correspondingly limits the travel distance; longer strokes require a smaller pitch or multi-start lead screws.\u003c\/p\u003e \u003cp\u003eMounted in rack-and-pinion drives or with a coupling at the screw end, the lead screw drives carriages linearly. When building gantry machines, CNC positioning tables, or dosing units, the lead screw is often the mechanical centerpiece; its rigidity and preload determine accuracy and repeatability.\u003c\/p\u003e \u003cp\u003eThe free screw end with an 8 mm diameter accommodates bearing mounts or can be coupled directly to a motor. Operation requires a drive motor (stepper motor or servo motor with suitable power) and a trapezoidal lead screw nut matching the thread type.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe exposed lead screw poses a risk of injury when rotating. During operation, a protective housing must prevent contact with the rotating thread. Before starting work, ensure that the bearing support provides sufficient lateral stability and that the drive motor can safely handle the loads on the lead screw.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Lead screw 300mm T8-2 (d=8mm, 2mm pitch), threaded rod\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997794410845,"sku":"F23108563","price":5.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gewindespindel-300mm-t8-2-d8mm-2mm-steigung-gewindestange-funduino-3470368.jpg?v=1791493407"},{"product_id":"meterware-ptfe-schlauch-4-x-2-mm-weiss","title":"PTFE tube 4 x 2 mm - sold by the meter, white, -20 to +200 °C","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePTFE tubing, 4 mm outer diameter, 2 mm wall thickness, sold by the meter, white\u003c\/li\u003e \u003cli\u003eChemically resistant, temperature range from -20 °C to +200 °C\u003c\/li\u003e \u003cli\u003e2 mm inner diameter for liquid and gas supply\u003c\/li\u003e \u003cli\u003eFlexible design with a smooth inner surface, minimal friction\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003ePTFE tubing sold by the meter is used for conveying liquids and gases in chemically demanding applications. The fluoropolymer material is resistant to almost all chemicals, alkalis, and acids. This makes the tubing indispensable wherever standard plastics would be damaged by aggressive media.\u003c\/p\u003e \u003cp\u003eThe material withstands operating temperatures from -20 °C to +200 °C, and the 2 mm inner diameter is suitable for fine dosing and compact tubing arrangements. The smooth PTFE surface reduces flow resistance and deposits, allowing even more viscous liquids to continue flowing. The tubing is purchased by the meter as needed and secured with suitable connectors or clamps.\u003c\/p\u003e \u003cp\u003eTypical applications include laboratory setups with chemical recirculation, analytical instruments for sample delivery, prototypes of dosing and pressure systems, and liquid cooling circuits with high-quality or aggressive media.\u003c\/p\u003e \u003cp\u003eWhen working with the tubing, note that connectors and clamps must be procured separately. The choice of connection method depends on the medium and the pressure. Above approximately 10 bar, stronger tubing classes are required.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003ePTFE tubing is intended exclusively for laboratory setups, prototypes, and development purposes, not for permanent installation in household systems. When handling aggressive or toxic chemicals, occupational safety measures and applicable safety regulations must be followed. If in doubt, clarify compatibility with the manufacturer of the medium to be conveyed before use.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Sold by the meter - PTFE tubing, 4 x 2 mm, white\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997844349277,"sku":"F23108852","price":1.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/meterware-ptfe-schlauch-4-x-2-mm-weiss-funduino-1442043.jpg?v=1791494720"},{"product_id":"gewindespindel-400mm-t8-2-d-8mm-2mm-steigung-gewindestange","title":"T8 lead screw - 400 mm, Ø 8 mm, 2 mm pitch, with brass nut","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eLead screw with T8 trapezoidal thread, 400 mm length\u003c\/li\u003e \u003cli\u003eDiameter 8 mm, thread pitch 2 mm\u003c\/li\u003e \u003cli\u003eSteel material, including brass lead screw nut\u003c\/li\u003e \u003cli\u003eConverts rotary motion into linear motion\u003c\/li\u003e \u003cli\u003eFor linear axes, 3D printers, and CNC machines\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis lead screw with a trapezoidal thread operates purely mechanically. The brass nut runs along the steel thread and converts each rotation of the lead screw into an axial feed of 2 mm. This moves an attached carriage or tool head forward or backward by exactly this amount with each rotation.\u003c\/p\u003e \u003cp\u003eThe 400 mm long lead screw with an 8 mm diameter fits into compact installation spaces where longer versions would not fit. The included nut has a flange with mounting holes for attachment to a carriage or bracket. Wear remains low because the trapezoidal thread distributes high surface pressure, while the 2 mm pitch offers a favorable compromise between speed and force for many applications.\u003c\/p\u003e \u003cp\u003eIn 3D printers, the lead screw typically controls the Z-axis, thereby determining the layer thickness and printing accuracy. In CNC machines and linear guides, it performs precise positioning tasks. It is also the key component for controlled linear movements in DIY projects with an electric drive.\u003c\/p\u003e \u003cp\u003eThe lead screw requires an external drive source, typically a stepper motor or servo motor connected via a coupling. The maximum usable travel is determined by the 400 mm length minus the space required for the nut and its mounting. At higher rotational speeds, vibrations occur and can be minimized through rigid mounting.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eLead screws can rotate rapidly during operation. Loose clothing, hair, and fingers must be kept away from the rotating lead screw. This component is intended exclusively for building prototypes and DIY projects.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 400 mm T8-2 lead screw (d=8 mm, 2 mm pitch), threaded rod\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997865124189,"sku":"F23108562","price":4.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gewindespindel-400mm-t8-2-d8mm-2mm-steigung-gewindestange-funduino-3812904.jpg?v=1791493772"},{"product_id":"push-fitting-fur-1-75mm-filament-m6-4mm-schlauch-ohne-anschlag","title":"Push Fitting M6 - 4 mm Tube, Without Stop, 1.75 mm Filament","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePush fitting for 1.75 mm filament in Bowden systems\u003c\/li\u003e \u003cli\u003eM6 threaded connection for screwing into an extruder or hotend\u003c\/li\u003e \u003cli\u003eTubing connection for a 4 mm outer diameter\u003c\/li\u003e \u003cli\u003eWithout a stop, the tube can be pushed through\u003c\/li\u003e \u003cli\u003eSpring-loaded clamping ring with access clip, tool-free installation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis push fitting connects the Bowden tube to the extruder or hotend. The M6 thread is screwed into the corresponding hole, while the 4 mm tube is inserted from the opposite side. Inside, there is a spring-loaded clamping ring with teeth that guides the filament and securely holds the tube.\u003c\/p\u003e \u003cp\u003eWhen inserted, the teeth of the clamping ring slide over the tube and allow it to pass only in the insertion direction. Pulling it out is possible only when the black plastic clip on top is pressed, releasing the clamping force. As the fitting has no stop, the tube can penetrate continuously into the housing; there is no insertion-depth limit, so the tube is stopped only by external resistance, such as the hotend itself.\u003c\/p\u003e \u003cp\u003eThe nickel-plated metal housing and the black plastic clip withstand the temperatures and forces that occur during printing. The fitting is suitable as a replacement part in case of wear or for retrofitting during printer modifications. The fitting is ready for immediate use with PTFE tubes with a 4 mm outer diameter.\u003c\/p\u003e \u003cp\u003eThe tube must be externally limited to prevent it from entering the fitting completely. This requires a suitable fastening or a stop on the hotend thread.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis component is intended exclusively for building and maintaining 3D printers. It becomes hot during printing and can cause burns; work on the printer must be performed only when it is switched off and cooled down. Work on the printer's electrical installation is reserved for qualified electricians.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* Push fitting for 1.75 mm filament, M6, 4 mm tube - Without stop\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997881999709,"sku":"F23106891","price":1.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/push-fitting-fuer-175mm-filament-m6-4mm-schlauch-ohne-anschlag-funduino-8303429.png?v=1791494300"},{"product_id":"master-creality-carborundum-glasplatte-verschiedene-ausfuhrungen","title":"Creality glass plate - carborundum build plate, various models","description":"\u003ch2\u003eCreality Carborundum Glass Plate\u003c\/h2\u003e \u003ch3\u003eOverview:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGlass plate with Carborundum coating\u003c\/li\u003e \u003cli\u003eExtremely good adhesion\u003c\/li\u003e \u003cli\u003eAdhesion decreases as the heated bed temperature decreases\u003c\/li\u003e \u003cli\u003eEasy removal of objects\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eScope of delivery:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x Creality Carborundum Glass Plate\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Ender 3 Pro","offer_id":66042318651741,"sku":"F23105212","price":24.9,"currency_code":"EUR","in_stock":false},{"title":"CR-10S Pro","offer_id":66045719773533,"sku":"F23105175","price":24.9,"currency_code":"EUR","in_stock":false},{"title":"Ender 6","offer_id":66045720035677,"sku":"F23105170","price":24.9,"currency_code":"EUR","in_stock":true},{"title":"CR-10S Pro V2","offer_id":66045704470877,"sku":"F23105224","price":24.9,"currency_code":"EUR","in_stock":false},{"title":"Ender-5 Pro","offer_id":66045704274269,"sku":"F23105294","price":24.9,"currency_code":"EUR","in_stock":false},{"title":"Ender-7","offer_id":66045707485533,"sku":"F23105168","price":24.9,"currency_code":"EUR","in_stock":true},{"title":"Ender 5","offer_id":66045724000605,"sku":"F23105233","price":24.9,"currency_code":"EUR","in_stock":false},{"title":"Ender 3","offer_id":66045737992541,"sku":"F23105183","price":24.9,"currency_code":"EUR","in_stock":false},{"title":"CR-5 Pro High T.","offer_id":66045738942813,"sku":"F23105190","price":24.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/6-F23105212-M_01.jpg?v=1791485617"},{"product_id":"0-3mm-extruder-duse-fur-2-85mm-filament","title":"0.3 mm extruder nozzle - for 2.85 mm filament, copper core","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eReplacement extruder nozzle for 2.85 mm filament\u003c\/li\u003e \u003cli\u003e0.3 mm nozzle diameter for fine print details\u003c\/li\u003e \u003cli\u003eCompatible with standard hot ends of common 3D printers\u003c\/li\u003e \u003cli\u003eCopper core for optimal heat conduction\u003c\/li\u003e \u003cli\u003eThread for secure attachment\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eAn extruder nozzle with a 0.3 mm opening significantly refines print output for 2.85 mm filament compared with standard nozzles. The small diameter reduces the extrusion width and enables finer structures, but requires higher printing temperatures and closer process monitoring.\u003c\/p\u003e \u003cp\u003eThe copper core efficiently conducts heat from the heater block to the printing material, which is particularly critical with small nozzle openings. The thread fits standard hot ends with a metric connection; before installation, the diameter and thread length must be checked against the existing printer.\u003c\/p\u003e \u003cp\u003eApplications include high-resolution miniature parts, detailed models with thin walls, and gears in the millimeter range. This nozzle is also suitable for prints with fine surface structures or lettering with line widths below 1 mm.\u003c\/p\u003e \u003cp\u003eThe 0.3 mm format requires consistently high-quality filament; any fibers or contamination in the material can compromise the flow rate. The print head must be replaced when standard nozzles (0.4 mm or larger) are to be used again.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe nozzle operates at printing temperatures between 200 and 250 degrees Celsius; avoid contact with the hot end. Use gloves or tools to replace the hot nozzle. Allow it to cool for at least five minutes after printing before removing the nozzle.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* 0.3 mm extruder nozzle for 2.85 mm filament\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66043882209629,"sku":"F23107036","price":1.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/03mm-extruder-duese-fuer-285mm-filament-funduino-3609028.jpg?v=1791486390"},{"product_id":"master-creality-pei-druckplatte-verschiedene-ausfuhrungen","title":"Creality PEI build plate - magnetic, up to 200 °C, various versions","description":"\u003ch2\u003eThe Creality PEI Build Plate in a Variety of Versions\u003c\/h2\u003e \u003ch3\u003eOverview:\u003c\/h3\u003e \u003cp\u003eThis build plate consists of two parts:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eThe magnetic base plate\u003c\/li\u003e \u003cli\u003eand the powder-coated PEI build plate\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe combination of these two plates ensures excellent adhesion and easy removal of printed objects. The PEI build plate is heat-resistant up to 200°C.\u003c\/p\u003e \u003cp\u003eSelect your Creality 3D printer from the list and look forward to your new PEI build plate!\u003c\/p\u003e \u003ch3\u003eScope of delivery\u003c\/h3\u003e \u003cp\u003e1x Creality PEI build plate -  various versions\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Ender 5 Plus","offer_id":66043921465693,"sku":"F23105285","price":56.47,"currency_code":"EUR","in_stock":false},{"title":"Ender 3","offer_id":66045698376029,"sku":"F23105380","price":34.16,"currency_code":"EUR","in_stock":false},{"title":"Ender 3 Pro","offer_id":66045693854045,"sku":"F23105434","price":34.16,"currency_code":"EUR","in_stock":false},{"title":"CR-20","offer_id":66045693985117,"sku":"F23105477","price":34.16,"currency_code":"EUR","in_stock":false},{"title":"Ender 3S","offer_id":66045693919581,"sku":"F23105462","price":34.16,"currency_code":"EUR","in_stock":false},{"title":"Ender 5","offer_id":66045693952349,"sku":"F23105512","price":34.16,"currency_code":"EUR","in_stock":false},{"title":"CR-10 V3","offer_id":66045694050653,"sku":"F23105430","price":43.59,"currency_code":"EUR","in_stock":false},{"title":"Ender 5 Pro","offer_id":66045694148957,"sku":"F23105526","price":34.16,"currency_code":"EUR","in_stock":false},{"title":"CR-X","offer_id":66045694181725,"sku":"F23105458","price":43.59,"currency_code":"EUR","in_stock":false},{"title":"CR-X Pro","offer_id":66045694116189,"sku":"F23105473","price":43.59,"currency_code":"EUR","in_stock":false},{"title":"CP-01","offer_id":66045694214493,"sku":"F23105499","price":34.16,"currency_code":"EUR","in_stock":false},{"title":"Ender 5S","offer_id":66045694345565,"sku":"F23105519","price":34.16,"currency_code":"EUR","in_stock":false},{"title":"Ender 3 V2","offer_id":66045734650205,"sku":"F23105287","price":34.16,"currency_code":"EUR","in_stock":false},{"title":"Ender 3 Max","offer_id":66045735174493,"sku":"F23105508","price":43.59,"currency_code":"EUR","in_stock":false},{"title":"CR-10S Pro V2","offer_id":66045735108957,"sku":"F23105495","price":43.59,"currency_code":"EUR","in_stock":false},{"title":"CR-10S Pro","offer_id":66045735272797,"sku":"F23105274","price":43.59,"currency_code":"EUR","in_stock":false},{"title":"CR-10 V2","offer_id":66045735371101,"sku":"F23105376","price":43.59,"currency_code":"EUR","in_stock":false},{"title":"CR-6 SE","offer_id":66045739958621,"sku":"F23105278","price":35.74,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-creality-pei-druckplatte-verschiedene-ausfuehrungen-funduino-7597827.jpg?v=1791489569"},{"product_id":"creality-upgrade-fur-z-achse-zusatzliche-gewindespindel-inkl-schrittmotor-und-doppelschraube","title":"Creality Z-axis lead screw - with stepper motor, for Ender-3","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUpgrade for Ender-3, Ender-3 Pro, and Ender-3 V2\u003c\/li\u003e \u003cli\u003eInstallation of an additional lead screw on the Z-axis\u003c\/li\u003e \u003cli\u003eIncreased precision and performance compared to the factory-installed lead screw\u003c\/li\u003e \u003cli\u003eImproved load capacity and noise reduction\u003c\/li\u003e \u003cli\u003eRepeatable positioning accuracy of 0.01mm\u003c\/li\u003e \u003cli\u003eHigh-quality steel for increased Z-axis stability\u003c\/li\u003e \u003cli\u003eOptimized print results\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eScope of delivery\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1x Creality Z-axis upgrade - Additional lead screw incl. stepper motor and double screw\u003c\/li\u003e \u003c\/ul\u003e","brand":"Creality","offers":[{"title":"Default Title","offer_id":66044232204637,"sku":"F23107023","price":34.16,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/creality-upgrade-fuer-z-achse-zusaetzliche-gewindespindel-inkl-schrittmotor-und-doppelschraube-funduino-2329747.jpg?v=1791488857"},{"product_id":"master-creality-dauerdruckfolie-verschiedene-ausfuhrungen","title":"Creality continuous printing film - replacement film for adhesive mounting, for various printer models","description":"\u003ch2\u003eEnduring print surface film compatible with Creality FDM printers\u003c\/h2\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eReplacement adhesive film for Creality 3D printers\u003c\/li\u003e \u003cli\u003eEasy installation\u003c\/li\u003e \u003cli\u003eResidue-free removal\u003c\/li\u003e \u003cli\u003eWith elegant branding\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eManufacturer's recommendation: \u003c\/strong\u003eWhen replacing the film, heat the heated bed to approx. 50° C!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThe products may differ from the images shown!\u003c\/p\u003e \u003ch3\u003eScope of delivery\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x Creality continuous printing film - various versions\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Ender 3","offer_id":66044280668509,"sku":"F23105379","price":4.29,"currency_code":"EUR","in_stock":false},{"title":"CR-20","offer_id":66048340525405,"sku":"F23105476","price":4.29,"currency_code":"EUR","in_stock":false},{"title":"Ender 3S","offer_id":66048315818333,"sku":"F23105461","price":4.29,"currency_code":"EUR","in_stock":false},{"title":"Ender 5","offer_id":66048293994845,"sku":"F23105511","price":4.29,"currency_code":"EUR","in_stock":false},{"title":"CP-01","offer_id":66048345440605,"sku":"F23105498","price":4.29,"currency_code":"EUR","in_stock":false},{"title":"Ender 5S","offer_id":66048295305565,"sku":"F23105518","price":4.29,"currency_code":"EUR","in_stock":false},{"title":"Ender 3 V2","offer_id":66048411926877,"sku":"F23105284","price":4.29,"currency_code":"EUR","in_stock":false},{"title":"Ender 3 Pro","offer_id":66048355565917,"sku":"F23105433","price":4.29,"currency_code":"EUR","in_stock":false},{"title":"Ender 5 Pro","offer_id":66048300515677,"sku":"F23105525","price":4.29,"currency_code":"EUR","in_stock":false},{"title":"CR-10 Max","offer_id":66048411894109,"sku":"F23105286","price":13.11,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-creality-dauerdruckfolie-verschiedene-ausfuehrungen-funduino-4802432.jpg?v=1791501857"},{"product_id":"master-creality-3d-drucker-zahnriemen-fur-y-achse","title":"Creality timing belt - Y-axis for 3D printers, various models","description":"\u003ch2\u003eQuality directly from the manufacturer\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eThe timing belts are imported directly from the manufacturer, guaranteeing exceptional quality. Please select the appropriate model from the variant selection.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eScope of delivery\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x Creality 3D printer - timing belt for the Y-axis\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The images may vary depending on the selected version!\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Ender 3 V2","offer_id":66044334047581,"sku":"F23105263","price":5.02,"currency_code":"EUR","in_stock":true},{"title":"Ender 3 Max","offer_id":66045712499037,"sku":"F23105369","price":5.02,"currency_code":"EUR","in_stock":true},{"title":"CR-10S Pro","offer_id":66045714104669,"sku":"F23105408","price":3.99,"currency_code":"EUR","in_stock":false},{"title":"CR-X","offer_id":66045714137437,"sku":"F23105414","price":3.99,"currency_code":"EUR","in_stock":false},{"title":"CR-X Pro","offer_id":66045714465117,"sku":"F23105439","price":3.99,"currency_code":"EUR","in_stock":false},{"title":"CR-10S","offer_id":66045714727261,"sku":"F23105522","price":5.55,"currency_code":"EUR","in_stock":true},{"title":"CR-10 S5","offer_id":66045715415389,"sku":"F23105257","price":7.44,"currency_code":"EUR","in_stock":true},{"title":"Ender 7","offer_id":66045719707997,"sku":"F23105452","price":7.44,"currency_code":"EUR","in_stock":true},{"title":"CR-10","offer_id":66045736255837,"sku":"F23105515","price":5.55,"currency_code":"EUR","in_stock":true},{"title":"CR-10 Max","offer_id":66045736386909,"sku":"F23105468","price":7.44,"currency_code":"EUR","in_stock":true},{"title":"CR-10 V2","offer_id":66045720199517,"sku":"F23105470","price":5.55,"currency_code":"EUR","in_stock":true},{"title":"Ender 3 Pro","offer_id":66045737927005,"sku":"F100013.2","price":4.99,"currency_code":"EUR","in_stock":false},{"title":"CR-6 Max","offer_id":66045754802525,"sku":"F23105506","price":3.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-creality-3d-drucker-zahnriemen-fuer-y-achse-funduino-6642030.jpg?v=1791488502"},{"product_id":"drag-chain-schleppkette-kabelfuhrung-kabelkanal-r28-10x10mm","title":"Drag chain R28 - cable guide 10 x 10 mm, red polyamide","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDrag chain for cable routing in machines and moving applications\u003c\/li\u003e \u003cli\u003eOpen link system with round joints\u003c\/li\u003e \u003cli\u003eMaterial, plastic (polyamide), color, red\u003c\/li\u003e \u003cli\u003eFlexible arrangement of multiple cables with different diameters possible\u003c\/li\u003e \u003cli\u003eTemperature-resistant up to approx. 80 °C\u003c\/li\u003e \u003cli\u003eModular design for variable lengths\u003c\/li\u003e \u003cli\u003eEasy installation without special tools\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA drag chain guides cables and hoses neatly along moving machine parts and protects them from damage. The red polyamide link system of this chain allows multiple cables of different thicknesses to be routed in parallel. The open links with round joints ensure predictable movements and bend radii, even with frequent extension and retraction.\u003c\/p\u003e \u003cp\u003eThe modular design allows the chain length to be flexibly adapted to the actual routing requirements. Links can be added or removed without requiring elaborate tools. At operating temperatures of up to approximately 80 degrees Celsius, the material retains its stability.\u003c\/p\u003e \u003cp\u003eTypical applications include gantry robots and linear axes, which require drag chains to protect their supply lines from wear. In machining centers with tools mounted on turrets or in mobile gripper systems, a chain also ensures reliable routing of power and control lines. It prevents cable breakage caused by kinking and thus avoids costly downtime.\u003c\/p\u003e \u003cp\u003eCorrectly sizing the travel distance and minimum bend radius according to the manufacturer's specifications is essential for a long service life. If the drag chain is sized too narrowly, both the cables and the links will wear out more quickly. Securing the chain at both ends prevents uncontrolled snaking during movement.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eDrag chains are machine protection components used in the construction of systems and special-purpose machines. When integrating them into existing systems or production equipment, the applicable machinery directives must be observed. If in doubt, consult the manufacturer's specifications regarding the permissible travel distance and bend radii.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1*  Drag Chain \/ Drag Chain \/ Cable Guide \/ Cable Duct R28, 10x10mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66044373401949,"sku":"F23110310","price":11.48,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/drag-chain-schleppkette-kabelfuehrung-kabelkanal-r28-10x10mm-funduino-6334089.png?v=1791488385"},{"product_id":"hitzebestandiges-polyimid-klebeband-braun-200mm-30m-druckbettbeschichtung","title":"Polyimide tape - brown, 200 mm x 3 m, up to 260 °C","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eHeat-resistant polyimide tape in brown\u003c\/li\u003e \u003cli\u003eWidth: 200 mm\u003c\/li\u003e \u003cli\u003eLength: 3 meters\u003c\/li\u003e \u003cli\u003eSuitable for temperatures up to approximately 260 degrees Celsius\u003c\/li\u003e \u003cli\u003eFor electrical and thermal insulation\u003c\/li\u003e \u003cli\u003eRetains its adhesion even after exposure to heat\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis polyimide tape provides insulation for high-temperature applications. While ordinary adhesive tapes fail when exposed to higher temperatures, this product retains its adhesion and integrity up to approximately 260 degrees Celsius. The brown version meets the standard for thermal insulation foils.\u003c\/p\u003e \u003cp\u003eHeating occurs quickly during soldering, electronic repairs, or PCB assembly. The tape remains in place where standard adhesive tapes would swell or come loose. A roll measuring three meters in length and 200 mm in width is suitable for larger areas, such as insulating sections of PCBs or protecting sensitive components during soldering.\u003c\/p\u003e \u003cp\u003eThe tape is used when working on PCBs under a soldering iron, covering capacitors and coils before heat is applied, and insulating conductive tracks in high-frequency or heavily heated circuits. Its use is generally limited to repair, prototyping, and development work; it is not designed for permanent installation in power networks or machinery.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe tape is intended exclusively for assembly and insulation during testing and development. It is not intended for installation in household electrical circuits or industrial systems. Caution is required when working with high temperatures to avoid burns. For questions about integration into larger systems, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Heat-resistant polyimide tape - brown, 200mm * 30m, print bed coating\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66044525445469,"sku":"F23106831","price":24.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/hitzebestaendiges-polyimid-klebeband-braun-200mm-30m-druckbettbeschichtung-funduino-3991304.jpg?v=1791487396"},{"product_id":"0-2mm-extruder-duse-fur-2-85mm-filament","title":"Extruder nozzle 0.2 mm - for 2.85 mm filament, steel","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eReplacement nozzle for filament 3D printers, diameter 0.2 mm\u003c\/li\u003e \u003cli\u003eFor 2.85 mm wide filament\u003c\/li\u003e \u003cli\u003ePrecision steel construction\u003c\/li\u003e \u003cli\u003eCompatible with standard hotend threads (M6 or M7)\u003c\/li\u003e \u003cli\u003eDirect replacement without modifications\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe 0.2 mm extruder nozzle is a replacement wear part for filament 3D printers and determines the thickness of the plastic strands deposited on the print bed. The small opening enables significantly finer structures than standard nozzles with a diameter of 0.4 mm, but requires slower print speeds and higher temperatures to press the plastic material through the narrow opening while keeping it sufficiently fluid.\u003c\/p\u003e \u003cp\u003eThe nozzle is screwed onto the hotend's heater block thread and replaces the worn or damaged previous nozzle. Damaged nozzles can often no longer be cleaned and discolor the print. The narrow 0.2 mm bore allows extremely fine details such as gears, relief patterns, or wall thicknesses from approximately 0.3 mm to be printed, which is not possible with wider nozzles.\u003c\/p\u003e \u003cp\u003eThis size is frequently used for miniature models, for producing highly detailed replacement parts, or in manufacturing processes where surface quality is crucial. A test print with the new nozzle quickly reveals whether the print temperature is set correctly and whether the nozzle is compatible with your printer.\u003c\/p\u003e \u003cp\u003eOperation requires a printer with a compatible hotend thread; the common sizes are M6 and M7. Selection and replacement should only be carried out with the heater block switched off and completely cooled. The precision of the bore is subject to wear and can deteriorate over time due to scratches or contamination, requiring regular replacement.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe heater block reaches operating temperatures above 200 °C. The nozzle may only be replaced after cooling down to prevent burns. This product is intended exclusively for the assembly and operation of 3D printers in private households or workshops, not for installation in industrial or commercial production facilities.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* 0.2mm extruder nozzle for 2.85mm filament\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66044528099677,"sku":"F23107035","price":1.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/02mm-extruder-duese-fuer-285mm-filament-funduino-6615156.jpg?v=1791487477"},{"product_id":"master-creality-resintank-ersatztank-fur-3d-drucker","title":"Creality Resin Tank - replacement tank with FEP film, various printer models","description":"\u003ch2\u003eCreality Replacement Tank for Resin Printers\u003c\/h2\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOriginal replacement part directly from the manufacturer!\u003c\/li\u003e \u003cli\u003eResin tank for 3D printers\u003c\/li\u003e \u003cli\u003eSuitable for selected Creality devices\u003c\/li\u003e \u003cli\u003eFEP film already installed\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eScope of delivery\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x Creality resin tank - replacement tank for 3D printers \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Halot-One CL-60","offer_id":66044677063005,"sku":"F23105429","price":45.15,"currency_code":"EUR","in_stock":false},{"title":"Halot-Sky CL-89","offer_id":66045719249245,"sku":"F23105267","price":45.15,"currency_code":"EUR","in_stock":false},{"title":"LD-002R","offer_id":66045719576925,"sku":"F23105375","price":45.15,"currency_code":"EUR","in_stock":false},{"title":"LD-006","offer_id":66045720723805,"sku":"F23105283","price":51.45,"currency_code":"EUR","in_stock":false},{"title":"LD-002H","offer_id":66045720789341,"sku":"F23105273","price":45.15,"currency_code":"EUR","in_stock":false},{"title":"Halot-Lite CL-89L","offer_id":66045721870685,"sku":"F23105372","price":51.45,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-creality-resintank-ersatztank-fuer-3d-drucker-funduino-3333796.jpg?v=1791492475"},{"product_id":"creality-linearlager-lm10uu-10-x-19-x-55-mm","title":"Creality Linear Bearing LM10UU - 10 x 19 x 55 mm","description":"\u003ch3\u003eOverview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCreality LM10UU linear bearing\u003c\/li\u003e \u003cli\u003eOriginal and sourced directly from the manufacturer\u003c\/li\u003e \u003cli\u003eSuitable for the Creality CR-5 Pro 3D printer\u003c\/li\u003e \u003cli\u003eExtremely quiet and smooth operation\u003c\/li\u003e \u003cli\u003eBearing dimensions: 10 x 19 x 55 mm (inner diameter x outer diameter x length)\u003c\/li\u003e \u003cli\u003eHole diameter: 10 mm\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eScope of delivery\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x Creality LM10UU linear bearing\u003c\/li\u003e \u003c\/ul\u003e","brand":"Creality","offers":[{"title":"Default Title","offer_id":66044715925853,"sku":"F23108935","price":9.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/creality-linearlager-lm10uu-10-x-19-x-55-mm-funduino-8600347.png?v=1791487585"},{"product_id":"creality-u-formige-kugellager-4-x-13-x-4-mm-2-stuck","title":"Creality U-shaped ball bearing - 4 x 13 x 4 mm, 2 pieces","description":"\u003ch3\u003eOverview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOriginal replacement part directly from the manufacturer\u003c\/li\u003e \u003cli\u003eU-shaped ball bearings for extruders \/ filament feeding\u003c\/li\u003e \u003cli\u003eHigh-quality workmanship\u003c\/li\u003e \u003cli\u003eQuiet operation \u003c\/li\u003e \u003cli\u003eDimensions: 4 x 13 x 4 mm\u003c\/li\u003e \u003cli\u003e2 bearings included\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eScope of delivery\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x Creality U-shaped ball bearings - 4 x 13 x 4 mm - 2 pieces\u003c\/li\u003e \u003c\/ul\u003e","brand":"Creality","offers":[{"title":"Default Title","offer_id":66044814852445,"sku":"F23106103","price":4.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/creality-u-foermige-kugellager-4-x-13-x-4-mm-2-stueck-funduino-5210935.jpg?v=1791488636"},{"product_id":"master-creality-3d-drucker-zahnriemen-fur-x-achse","title":"Creality X-axis timing belt - for various 3D printers","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eThe timing belts are imported directly from the manufacturer, ensuring unique quality. Please select the appropriate model from the variant selection.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1x Creality 3D printer - timing belt\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The images may vary depending on the selected version!\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Ender 5","offer_id":66045051109725,"sku":"F23105266","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"Ender 5S","offer_id":66045700440413,"sku":"F23105371","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"CR-20","offer_id":66045700473181,"sku":"F23105453","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"Ender 3 Max","offer_id":66045700505949,"sku":"F23105318","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"CR-10","offer_id":66045700669789,"sku":"F23105342","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"CR-10 V3","offer_id":66045701652829,"sku":"F23105491","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"SV01","offer_id":66045701620061,"sku":"F23105311","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"CR-10S Pro V2","offer_id":66045701914973,"sku":"F23105295","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"CR-10S Pro","offer_id":66045701783901,"sku":"F23105521","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"CR-X","offer_id":66045701816669,"sku":"F23105505","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"CR-X Pro","offer_id":66045702406493,"sku":"F23105514","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"CP-01","offer_id":66045703160157,"sku":"F23105367","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"CR-10S","offer_id":66045703651677,"sku":"F23105348","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"CR-10 Mini","offer_id":66045703422301,"sku":"F23105354","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"CR-20 Pro","offer_id":66045703782749,"sku":"F23105469","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"CR-200B","offer_id":66045710532957,"sku":"F23105330","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"CR-X V2","offer_id":66045710926173,"sku":"F23105303","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"Ender 2","offer_id":66045710991709,"sku":"F23105423","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"CR-10 S4","offer_id":66045711384925,"sku":"F23105370","price":5.55,"currency_code":"EUR","in_stock":true},{"title":"CR-10 S5","offer_id":66045711450461,"sku":"F23105425","price":5.55,"currency_code":"EUR","in_stock":true},{"title":"Ender 6","offer_id":66045724361053,"sku":"F10072.1","price":12.67,"currency_code":"EUR","in_stock":true},{"title":"Ender 5 Plus","offer_id":66045724164445,"sku":"F10072.2","price":7.16,"currency_code":"EUR","in_stock":true},{"title":"CR-10 V2","offer_id":66045735666013,"sku":"F23105336","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"Sermoon D1","offer_id":66045735862621,"sku":"F23105324","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"CR-10 Max","offer_id":66045736485213,"sku":"F23105264","price":5.55,"currency_code":"EUR","in_stock":true},{"title":"CR-6 Max","offer_id":66045736124765,"sku":"F23105455","price":5.55,"currency_code":"EUR","in_stock":true},{"title":"Ender 2 Pro","offer_id":66045748019549,"sku":"F23105258","price":3.67,"currency_code":"EUR","in_stock":false},{"title":"Ender 5 Pro","offer_id":66045739368797,"sku":"F23105426","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-creality-3d-drucker-zahnriemen-fuer-x-achse-funduino-5231177.jpg?v=1791488772"},{"product_id":"master-creality-magnetische-bauplatte-verschiedene-ausfuhrungen","title":"Creality magnetic build plate - for various 3D printers","description":"\u003ch2\u003eThe Creality magnetic build plate - It doesn't get any easier!\u003c\/h2\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe product consists of a build plate and an underside. The underside is adhered to the printer's build area. Since both the underside and the build plate itself are magnetic, the following advantages result when using it: \u003c\/p\u003e \u003cul\u003e \u003cli\u003eThe finished part can be easily removed from the printer together with the build plate\u003c\/li\u003e \u003cli\u003eBy gently bending the build plate, the part can be removed from the plate with ease\u003c\/li\u003e \u003cli\u003eSince mechanical wear is reduced to a minimum, the product is characterized by a long service life\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eCompatibility\u003c\/h3\u003e \u003cp\u003eThe product variants 235 x 235 mm - Ender Logo and 235 x 235 mm - Creality Logo can be used with the following devices: \u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003cspan\u003eEnder 3 V2, Ender 3, Ender 3 Pro, Ender 3S, CR-20, CP-01, Ender 5, Ender 5S, Ender 5 Pro\u003c\/span\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003e\u003cspan\u003eScope of delivery\u003c\/span\u003e\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\u003cspan\u003e1x Creality - Magnetic build plate - various versions\u003c\/span\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThe products may differ from the images shown!\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"CR-10S Pro","offer_id":66048408682845,"sku":"F23105276","price":17.99,"currency_code":"EUR","in_stock":false},{"title":"CR-10 V2","offer_id":66048379158877,"sku":"F23105377","price":17.99,"currency_code":"EUR","in_stock":false},{"title":"CR-X Pro","offer_id":66048340558173,"sku":"F23105474","price":17.99,"currency_code":"EUR","in_stock":false},{"title":"CR-10S Pro V2","offer_id":66048345506141,"sku":"F23105496","price":17.99,"currency_code":"EUR","in_stock":false},{"title":"Ender 3 Max","offer_id":66048292323677,"sku":"F23105509","price":17.99,"currency_code":"EUR","in_stock":false},{"title":"CR-10S","offer_id":66048379847005,"sku":"F23105381","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"CR-10","offer_id":66048415400285,"sku":"F23105289","price":17.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-creality-magnetische-bauplatte-verschiedene-ausfuehrungen-funduino-7266216.jpg?v=1791501091"},{"product_id":"sbr16uu-lagerblock-gleitblock-fur-linearfuhrung-3d-drucker","title":"SBR16UU linear bearing block - 16 mm linear guide, up to 45 kg, M5","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSlide block for 16 mm linear rails, open design\u003c\/li\u003e \u003cli\u003eFour plastic rollers in two rows\u003c\/li\u003e \u003cli\u003eMaximum load capacity of 45 kg per block\u003c\/li\u003e \u003cli\u003eM5 mounting holes on the top\u003c\/li\u003e \u003cli\u003eSuitable for horizontal and vertical mounting\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis slide block connects to an SBR16 rail to form a two-axis linear guide. The rollers enable low-friction longitudinal movement with high rigidity. Lubrication is not required.\u003c\/p\u003e \u003cp\u003eFor loads of up to 45 kg per block, the open design provides sufficient load capacity. Multiple blocks on one rail provide correspondingly greater load-bearing safety, for example when moving workpieces or building XY tables. The M5 holes allow tools or brackets to be attached directly.\u003c\/p\u003e \u003cp\u003eThe blocks work reliably in all planes, whether as a travel axis on a milling machine or as a guide element in laboratory setups. In model making, they are used to move camera sliders or position measuring instruments.\u003c\/p\u003e \u003cp\u003eA suitable SBR16 rail of the appropriate length is required. The mounting holes must be matched to the fasteners of the target object. Dust or chips should be removed regularly to minimize wear.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis slide block is a mechanical guide element without a power supply and must not be connected directly to the power grid. It is intended exclusively for prototype, testing, and development setups. When working on installed linear axes with electric drives, ensure that all power sources are disconnected before performing maintenance or modifications.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x\u0026nbsp;SBR16UU slide block for 3D printers\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045152100701,"sku":"F23106354","price":4.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/sbr16uu-lagerblock-gleitblock-fuer-linearfuehrung-3d-drucker-funduino-4386282.png?v=1791488825"},{"product_id":"creality-694zz-rillenkugellager","title":"Creality 694ZZ Deep-Groove Ball Bearing - 4 x 11 x 4 mm","description":"\u003ch3\u003eOverview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOriginal replacement part from the manufacturer\u003c\/li\u003e \u003cli\u003eBall bearing for Creality 3D printers\u003c\/li\u003e \u003cli\u003eQuiet and smooth operation\u003c\/li\u003e \u003cli\u003eType: 694ZZ\u003c\/li\u003e \u003cli\u003eDimensions: 4 x 11 x 4 mm\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eScope of delivery\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x Creality 694ZZ deep-groove ball bearing\u003c\/li\u003e \u003c\/ul\u003e","brand":"Creality","offers":[{"title":"Default Title","offer_id":66045331636573,"sku":"F23108997","price":3.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/creality-694zz-rillenkugellager-funduino-2310881.jpg?v=1791489039"},{"product_id":"0-3mm-extruder-duse-fur-1-75mm-filament","title":"Extruder nozzle 0.3 mm - brass, for 1.75 mm filament","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eReplacement nozzle for 3D printers with 1.75-mm filament\u003c\/li\u003e \u003cli\u003eOpening diameter: 0.3 mm\u003c\/li\u003e \u003cli\u003eBrass version for high thermal conductivity\u003c\/li\u003e \u003cli\u003eCompatible with common extruders in Bowden and direct-drive configurations\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe extruder nozzle with a 0.3-mm opening serves as a replacement print head for 3D printers with 1.75-mm filament. The small diameter enables very fine details and smooth surfaces in printed results, but requires precise leveling and tighter tolerances for material feeding than larger nozzles.\u003c\/p\u003e \u003cp\u003eThe brass material transfers heat evenly to the filament and enables consistent extrusion even at higher printing speeds. The nozzle can be screwed into standard extruder heads with an M6 or M7 thread and works with both Bowden systems and direct-drive setups, provided the operating temperature of the printer hotend is between 200 and 300 degrees Celsius.\u003c\/p\u003e \u003cp\u003eThe fine nozzle is particularly suitable for projects requiring sharp edges, closely spaced structures, or precise mechanical parts. When used with highly filled or fiber-reinforced materials, printing pressure may increase and the nozzle may wear out more quickly. Replacing the nozzle does not require recalibrating the printer firmware; simply screw in the new nozzle and configure the printer as usual.\u003c\/p\u003e \u003cp\u003eReplacement is necessary when the opening has narrowed due to wear or contamination, or when material is leaking. Compatibility can be checked using the thread (M6 or M7) and the installation height of the hotend. The hotend head should be cooled before installation.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe nozzle reaches temperatures of up to 300 degrees Celsius during printing. Intended exclusively for the assembly, maintenance, and testing of 3D printers. Before installation or replacement, wait until it has cooled down, and if you are unsure about the correct installation position, consult a qualified electrician or the printer manufacturer.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 0.3 mm extruder nozzle for 1.75 mm filament\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045608362333,"sku":"F23106591","price":3.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/03mm-extruder-duese-fuer-175mm-filament-funduino-4035335.png?v=1791489337"},{"product_id":"hitzebestandiges-polyimid-klebeband-braun-50mm-30m-druckbettbeschichtung","title":"Polyimide Tape - 50 mm x 30 m, up to 260 °C, brown","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePolyimide adhesive tape for heat resistance up to 260 °C\u003c\/li\u003e \u003cli\u003eWidth 50 mm, length 30 m\u003c\/li\u003e \u003cli\u003eSolvent-free acrylic adhesive\u003c\/li\u003e \u003cli\u003eBrown coloring for visibility\u003c\/li\u003e \u003cli\u003eTear-resistant and dimensionally stable even under thermal stress\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis heat-resistant polyimide adhesive tape is suitable for applications where standard adhesive tapes fail. The material remains functional up to 260 °C and loses neither its adhesive strength nor its structure when exposed to heat or repeated temperature changes.\u003c\/p\u003e \u003cp\u003eThe solvent-free acrylic adhesive adheres reliably to surfaces such as glass, metal, and plastics without leaving residue. The brown coloring makes the tape visible and simplifies inspection of bonded areas. Thanks to its tear resistance, it also withstands mechanical stress.\u003c\/p\u003e \u003cp\u003eTypical applications include heat shielding around solder joints, insulating components in devices that generate heat, attaching sensors in thermal environments, and sealing cable transitions next to heat sources. The tape is also used for masking circuit boards during repairs.\u003c\/p\u003e \u003cp\u003eThe adhesive tape is supplied on a 30 m roll. For lasting adhesion, surfaces should be clean and dry before application.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eWhen working with heat-resistant adhesive tapes near soldering equipment or other heat sources, exercise caution to avoid burns. The product is intended exclusively for test, development, and prototype setups. Work on or near electrical installations must be carried out by qualified electricians.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Heat-resistant polyimide adhesive tape - brown, 50mm * 30m, print bed coating\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045618782557,"sku":"F23106861","price":9.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/hitzebestaendiges-polyimid-klebeband-braun-50mm-30m-druckbettbeschichtung-funduino-1068999.jpg?v=1791489712"},{"product_id":"teflon-ptfe-hot-end-isolator-coupler-koppler-fur-ultimaker-2-0-fur-1-75mm-filament","title":"PTFE Insulator Coupler for Ultimaker 2 - GF20, 1.75 mm Filament","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGlass-fiber-reinforced PTFE isolator coupler for Ultimaker 2 and 2+\u003c\/li\u003e \u003cli\u003eFilament diameter: 1.75 mm\u003c\/li\u003e \u003cli\u003eOperating temperature up to 250 °C, briefly up to 300 °C\u003c\/li\u003e \u003cli\u003eStepped cylindrical shape with a central through-hole for thermal insulation\u003c\/li\u003e \u003cli\u003eReplacement part without electrical connections, easy replacement without additional tools\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe isolator coupler is a stepped plastic component positioned between the hot nozzle area and the cooler extruder section. Glass-fiber-reinforced PTFE (GF20) conducts heat less effectively than pure PTFE, preventing the filament from softening above the print nozzle. The stepped shape fits precisely into the hot end holder, and 1.75 mm filament passes through the central bore.\u003c\/p\u003e \u003cp\u003eAs a wear part, the coupler is exposed to repeated thermal stress. Friction with the filament can cause the bore to widen over time, or the material may age and become brittle. Replacement is then necessary to restore reliable printing results. The component can be installed in the existing assembly without tools.\u003c\/p\u003e \u003cp\u003eThe replacement coupler is designed for Ultimaker 2 and Ultimaker 2+. It is suitable for hot end maintenance when print quality deteriorates or filament feeding problems occur. No additional accessories are required for operation, as all necessary mounting surfaces are already present.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis component is intended exclusively for maintenance, repair, and operating purposes on 3D printers. It is not a toy and should not be put in the mouth. After removal from the printer, the component may remain hot for several minutes. Avoid touching it with bare hands and allow it to cool before handling.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* Teflon PTFE Hot End Isolator Coupler for Ultimaker 2.0 for 1.75mm Filament\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045620158813,"sku":"F23107046","price":5.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/teflon-ptfe-hot-end-isolator-coupler-koppler-fuer-ultimaker-20-fuer-175mm-filament-funduino-7512352.png?v=1791489705"},{"product_id":"master-mk8-extruder-duse-fur-1-75mm-filament","title":"MK8 Nozzle - Brass, M6 Thread, for 1.75 mm Filament, Various Sizes","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eReplacement nozzle for 1.75 mm filament, multiple sizes available\u003c\/li\u003e \u003cli\u003eM6 threaded connection for MK8 extruder head\u003c\/li\u003e \u003cli\u003eBrass design for standard printing temperatures\u003c\/li\u003e \u003cli\u003eResistance to wear when used with high-temperature filaments\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe nozzle is a wear replacement part for 3D printers with an MK8 extruder system and a 1.75 mm filament diameter. It melts the plastic material and dispenses it in a fine stream.\u003c\/p\u003e \u003cp\u003eThe brass nozzle conducts heat evenly to the melting area. The thread design enables quick replacement on the print head without special tools. Multiple opening sizes allow adjustment to different layer heights and printing speeds.\u003c\/p\u003e \u003cp\u003eThe nozzle is used with common printers based on the MK8 standard as well as compatible hotend assemblies. It replaces worn or clogged original nozzles and is regularly kept as part of a maintenance stock.\u003c\/p\u003e \u003cp\u003eCommon operating temperatures for PLA, PETG, and ABS range from 190 to 250 degrees Celsius. High-temperature filaments may require a nozzle made of a harder alloy. Wear occurs more rapidly with abrasive materials such as carbon-reinforced plastic mixtures.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe nozzle heats up during printing and poses a burn hazard; only touch it once it has cooled down. This product is intended exclusively for use in 3D printers and is not suitable for other applications.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x MK8 extruder nozzle for 1.75 mm filament\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"0.3 mm","offer_id":66045621403997,"sku":"F23109063","price":1.07,"currency_code":"EUR","in_stock":true},{"title":"0.35 mm","offer_id":66045757849949,"sku":"F23109064","price":1.07,"currency_code":"EUR","in_stock":true},{"title":"0.5 mm","offer_id":66045776724317,"sku":"F23109070","price":1.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-mk8-extruder-duese-fuer-175mm-filament-funduino-1937290.png?v=1791489942"},{"product_id":"anet-et5-et4-0-6mm-duse-fur-1-75mm-filament","title":"3D printer nozzle 0.6 mm - brass, M6, for ANET ET4 and ET5","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eReplacement nozzle for FDM 3D printers with a 0.6 mm opening\u003c\/li\u003e \u003cli\u003eCompatible with 1.75 mm filament diameter\u003c\/li\u003e \u003cli\u003eSuitable for ANET ET5 and ET4 printers\u003c\/li\u003e \u003cli\u003eEnables larger layer heights than standard nozzles\u003c\/li\u003e \u003cli\u003eIncreased throughput at the same print speed\u003c\/li\u003e \u003cli\u003eMade of brass with improved thermal conductivity\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe replacement nozzle for 1.75 mm filament with a 0.6 mm opening enables larger layer heights than smaller standard nozzles, thereby increasing the material flow per unit of time. This significantly reduces print times, especially for objects with low surface-resolution requirements.\u003c\/p\u003e \u003cp\u003eThe brass material transfers heat evenly to the filament, resulting in more consistent results and a more stable material flow. For ANET ET4 and ET5 printers, the nozzle fits directly into the designated hot-end thread; no modifications are required.\u003c\/p\u003e \u003cp\u003eThe larger outlet area is suitable for rapid prototypes, test prints, and structural parts where high resolution is not a priority. Finely detailed or thin-walled models, however, require the standard 0.4 mm nozzle. When switching between different nozzle sizes, the firmware setting for the layer height must be adjusted to achieve consistent results.\u003c\/p\u003e \u003cp\u003eThe printer should be allowed to cool completely before installation. The nozzle can be installed and removed more easily when the hot end is heated. In case of wear or clogging, replacement is recommended; attempting to clean it may damage its geometry.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eBe aware of the risk of burns from hot hot ends during installation and removal. Work on the printer should only be carried out once all components have cooled down. This consumable is intended for the assembly and operation of private 3D printers; for questions about installation, consult a qualified electrician or the manufacturer.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* ANET ET5 ET4 0.6 mm nozzle for 1.75 mm filament\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045628776797,"sku":"F23106000","price":2.2,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/anet-et5-et4-06mm-duese-fuer-175mm-filament-funduino-2045814.jpg?v=1791489883"},{"product_id":"blue-tape-klon-48mm-x-54-8m-druckbettbeschichtung","title":"Print bed coating Blue Tape - 48 mm x 8 m, self-adhesive","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSelf-adhesive coating for 3D printer beds, 48 mm wide\u003c\/li\u003e \u003cli\u003e8 meters per roll\u003c\/li\u003e \u003cli\u003eBlue-colored for optimal visual inspection\u003c\/li\u003e \u003cli\u003eAdheres to flat surfaces such as glass plates and aluminum profiles\u003c\/li\u003e \u003cli\u003ePrints can be easily removed after cooling\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis self-adhesive coating is designed to improve the adhesion of plastic prints to the print bed of FDM 3D printers. The blue film is applied to the flat printing surface and ensures optimal adhesion during printing.\u003c\/p\u003e \u003cp\u003eThe matte surface provides good grip for the liquid plastic material in the first print layer. After cooling, the prints detach on their own, eliminating the need for scraping or heating. The roll, measuring eight meters in length and 48 millimeters in width, is sufficient for covering the same print bed multiple times or for use on several devices.\u003c\/p\u003e \u003cp\u003eThe coating adheres to glass plates, aluminum profiles, and other smooth support surfaces. It is applied directly to the device's print bed and replaced when worn. Before applying it, the surface should be dry and free of grease.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis coating is intended exclusively for the assembly and commissioning of 3D printers, as well as for testing and development purposes. Replacing it while printing is in progress or when the print bed is hot poses a risk of burns; wait until the device has cooled down before carrying out any work.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045629006173,"sku":"F23108879","price":8.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/blue-tape-klon-48mm-x-548m-druckbettbeschichtung-funduino-6232714.jpg?v=1791490370"},{"product_id":"anet-3-8mm-teflonschlauch-0-5m-fur-3d-drucker-et4-et4x-et4-pro-et5-et5x-et5-pro","title":"PTFE tube 0.5 m - Ø 3 mm inner diameter, 8 mm outer diameter, for 3D printers","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTeflon tube for filament feeding in 3D printers\u003c\/li\u003e \u003cli\u003eInner diameter 3 mm, outer diameter 8 mm\u003c\/li\u003e \u003cli\u003eLength 0.5 m\u003c\/li\u003e \u003cli\u003ePTFE material (polytetrafluoroethylene) with low friction\u003c\/li\u003e \u003cli\u003eSuitable for Bowden extruder systems such as the one in the ANET ET4\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe Teflon tube with a 3 mm inner diameter is a replacement wear part for 3D printers with a Bowden drive. The PTFE material significantly reduces friction losses during filament transport between the extruder motor and print head. This directly improves extrusion stability and print quality.\u003c\/p\u003e \u003cp\u003eThe 0.5 m version fits compact printers such as the ANET ET4, where short feeding paths between the assemblies are typical. Longer tubes would take up space here and are not necessary. The tube is routed between the stationary extruder motor and the moving print head and guides the heated filament through under pressure.\u003c\/p\u003e \u003cp\u003eThis replacement part is used when the existing PTFE tube has worn surfaces, becomes less slippery, or loses throughput after repeated filament changes. Regular replacement after approximately 500 to 1,000 operating hours helps prevent delays in filament procurement. The module fits the existing tube connectors without additional adapters.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis wear part is intended exclusively for operating 3D printers in private workshops and for testing and development purposes. Qualified electricians should be consulted when working on the printer's electrical equipment, especially if modifications to the power supply or heating system are planned.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045629333853,"sku":"F23108445","price":3.4,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/anet-38mm-teflonschlauch-05m-fuer-3d-drucker-et4-et4x-et4-pro-et5-et5x-et5-pro-funduino-2660664.jpg?v=1791489799"},{"product_id":"m6x26-1-75-mm-mk8-extruder-pipe","title":"MK8 heatbreak M6x26 - ceramic tube, 1.75 mm filament","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eReplacement part for 3D printers, MK8 Hotend type\u003c\/li\u003e \u003cli\u003eTube made of ceramic insulation material\u003c\/li\u003e \u003cli\u003eInner diameter 3 mm for 1.75-mm filament\u003c\/li\u003e \u003cli\u003eLength 26 mm\u003c\/li\u003e \u003cli\u003eM6 thread for screwing into the print head\u003c\/li\u003e \u003cli\u003eTemperature-resistant up to 250 °C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe ceramic insulation tube is a replacement part for the MK8 Hotend and surrounds the area between the heating block and nozzle. It reduces heat loss upward and prevents filament from hardening in this area before it exits the nozzle.\u003c\/p\u003e \u003cp\u003eThe tube is suitable for a filament diameter of 1.75 mm and is screwed into the print head using an M6 thread. The ceramic withstands temperatures of up to 250 °C and remains effective as insulation at this temperature without bursting or changing shape.\u003c\/p\u003e \u003cp\u003eContinuous regular printer operation or switching to other filament types requires an intact insulation tube so that temperature control between the heated bed and nozzle works precisely. Wear caused by accumulated filament or deformation due to overloading visibly affects print quality.\u003c\/p\u003e \u003cp\u003eThis part is a wear item that should be replaced at regular intervals depending on frequency of use. Ordering requires that the MK8 Hotend is already available and that its exact year of manufacture or revision has been clarified, as several versions are available.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe tube is installed in a print head heated to at least 200 °C and sits directly next to the heating block. Before working in this area, allow the printer to cool completely and disconnect it from the power supply. This replacement is maintenance work on the printer itself and may only be carried out if the printer manufacturer's safety regulations are followed.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x M6x26 1.75 mm MK8 Extruder Pipe\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045636477277,"sku":"F23106586","price":1.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/m6x26-175-mm-mk8-extruder-pipe-funduino-1061426.png?v=1791489205"},{"product_id":"0-2mm-extruder-duse-fur-1-75mm-filament-kompatibel-zu-mk8","title":"Extruder nozzle 0.2 mm - for 1.75 mm filament, MK8, steel","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eReplacement nozzle for 3D printers using 1.75 mm filament\u003c\/li\u003e \u003cli\u003eOrifice diameter: 0.2 mm\u003c\/li\u003e \u003cli\u003eMade of hardened steel with a brass core\u003c\/li\u003e \u003cli\u003eDirect replacement for worn or clogged nozzles\u003c\/li\u003e \u003cli\u003eEnables higher print quality through precise layer heights\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eAn extruder nozzle with a diameter of 0.2 mm replaces the original nozzle in 3D printers that process 1.75 mm filament. The minimal orifice diameter enables significantly finer structures and better surface quality, as the layer height can be reduced to as little as 0.1 mm. Print speed decreases with smaller nozzles, so prints take longer.\u003c\/p\u003e \u003cp\u003eThe hardened steel design with a brass core provides wear resistance during extended use and withstands abrasive materials such as filled filaments better than pure brass nozzles. The material combines surface hardness with good thermal conductivity. A nozzle of this size requires the printer heater to maintain a stable temperature between 200 and 260 degrees Celsius, depending on the filament type.\u003c\/p\u003e \u003cp\u003eThe 0.2 mm nozzle is suitable for models with fine details, gears, miniature figures, or technical prototypes where precision takes priority over print speed. The small profile also shows its strengths when printing very thin walls.\u003c\/p\u003e \u003cp\u003eDirect replacement is only possible if the nozzle has the same thread size and the same design as the previous one. Before installation, the print head and nozzle thread must be thoroughly cleaned. The original filament should be unloaded from the printer before replacement.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe nozzle becomes hotter than 200 degrees Celsius during printing and remains thermally stressed for a long time after operation ends; burns are possible. The product is intended exclusively for installation in 3D printers and for testing and development purposes. Work on the heated print head requires care; the printer manufacturer's instructions must be followed.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 0.2mm extruder nozzle for 1.75mm filament, compatible with MK8 hotends\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045643227485,"sku":"F23109106","price":1.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/02mm-extruder-duese-fuer-175mm-filament-kompatibel-zu-mk8-funduino-6842688.jpg?v=1791490987"},{"product_id":"mk8-extruder-duse-0-4mm-fur-1-75mm-filament-anet-creality","title":"MK8 nozzle 0.4 mm - brass, 1.75 mm filament, for Anet","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eReplacement nozzle for 3D printers with 1.75 mm filament\u003c\/li\u003e \u003cli\u003eOrifice diameter: 0.4 mm\u003c\/li\u003e \u003cli\u003eMK8 thread for Anet print heads\u003c\/li\u003e \u003cli\u003eBrass construction\u003c\/li\u003e \u003cli\u003eMachined tip for precise layer resolution\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis nozzle is a replacement print head component for 3D printers with an MK8 connection. It processes 1.75 mm filament and produces narrow, detailed structures with a diameter of 0.4 mm. For Anet series printers, it fits directly into the existing heating system without any further modifications.\u003c\/p\u003e \u003cp\u003eBrass reliably conducts heat to the melting chamber and enables stable printing temperatures between approximately 200 and 280 degrees Celsius, depending on the filament type used. The prefabricated tip eliminates the need to calibrate or rework the diameter and resolution yourself.\u003c\/p\u003e \u003cp\u003eThis diameter is suitable for prints requiring a high level of detail, from functional parts with fine structures to decorative objects with visible layers. In development and prototyping, nozzle changes are common when precision takes priority over printing speed.\u003c\/p\u003e \u003cp\u003eNew or worn nozzles can be replaced without disassembling the entire print unit, provided the filament has been retracted and the print head has cooled down. Operation requires a functioning heated bed and the printer's appropriate control software, in which the nozzle size must also be entered.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe print head becomes hotter than 200 degrees Celsius during operation; avoid contact. This nozzle is intended exclusively for operating 3D printers for prototyping, testing, and development purposes, not for continuous commercial production use.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cp\u003ePrinter nozzle 1 x 0.4 mm inlet diameter 1.75 mm outlet diameter 0.4 mm screw thread: M6 hexagonal diameter: 6 mm\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045646897501,"sku":"F23107073","price":1.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/mk8-extruder-duese-04mm-fuer-175mm-filament-anet-creality-funduino-5537144.jpg?v=1791490689"},{"product_id":"push-fitting-fur-2-85mm-filament","title":"Push Fitting - push-in connector for 2.85 mm filament","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePush fitting for 2*8.5 mm filaments, tool-free push connection\u003c\/li\u003e \u003cli\u003eMaximum pressure load of 10 bar\u003c\/li\u003e \u003cli\u003eInner diameter of shaft connections: 5.32 mm\u003c\/li\u003e \u003cli\u003eM16*2 thread for the connection side\u003c\/li\u003e \u003cli\u003eSeal made of EPDM rubber\u003c\/li\u003e \u003cli\u003eHolds two filament strands in parallel\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe push fitting connects two 8.5 mm filaments in a pressure-tight manner without screw connections or compression fittings. It is simply pushed on and then held securely in the line by the retention fitting and internal retaining spring. This eliminates the need for tools during assembly and disassembly.\u003c\/p\u003e \u003cp\u003eThe connection withstands pressures of up to 10 bar, which is sufficient for compressed-air systems and low-pressure pneumatics. The EPDM seal used tolerates temperatures from –20 to +60 °C. The M16*2 thread on the connection side is screwed directly into a corresponding thread on the distributor or manifold; the shaft connections with an inner diameter of 5.32 mm accommodate the filament strands.\u003c\/p\u003e \u003cp\u003eAreas of application include pneumatic multi-line systems, such as in automation technology for connecting multiple compressed-air lines to central distribution blocks, as well as spraying systems and pressure-vacuum applications where two channels are used in parallel. Wear-related replacement is also simplified, as the filaments can be inserted and removed quickly.\u003c\/p\u003e \u003cp\u003eThe fitting requires a distributor with a matching M16-x-2 thread. For pressure applications above 10 bar or temperatures outside the permitted range, a different fitting is required.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003ePressure fittings are exposed to high loads when operated above the rated pressure; faulty connections and overpressure can cause uncontrolled pressure equalization and injuries. Before operation, check that all connections are secure and that the operating pressure does not exceed 10 bar. Work on pressure systems must be carried out by qualified electrical personnel or qualified pneumatic technicians; if in doubt, consult a qualified electrician before commissioning.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045656432989,"sku":"F23107047","price":1.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/push-fitting-fuer-285mm-filament-funduino-2408170.jpg?v=1791491794"},{"product_id":"0-4mm-extruder-duse-fur-1-75mm-filament","title":"Extruder Nozzle 0.4 mm - brass, M6 thread, 1.75 mm filament","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eReplacement nozzle for 1.75-mm filament with a 0.4-mm opening\u003c\/li\u003e \u003cli\u003eStandard diameter for layer resolution and print speed\u003c\/li\u003e \u003cli\u003eBrass construction with good thermal conductivity\u003c\/li\u003e \u003cli\u003eM6 threaded connection for common hotends\u003c\/li\u003e \u003cli\u003eOperating temperature of up to 300 °C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe extruder nozzle is a replacement nozzle for fused deposition modeling devices and directly determines the resolution of the printed result. The 0.4-mm opening is the standard for a balanced ratio between layer accuracy and print speed, while its 1.75-mm filament compatibility makes it suitable for most common printers.\u003c\/p\u003e \u003cp\u003eThe nozzle is made of brass and efficiently transfers the molten material. Its compact design with an M6 thread fits standard hotend mounts, while the nozzle tip is conically shaped and wear-resistant. The operating temperature reaches up to 300 °C, making it possible to print with standard plastics such as PLA, PETG, and ABS without additional measures.\u003c\/p\u003e \u003cp\u003eThe nozzle is used for printing prototypes with standard accuracy, as well as functional plastic models. Individual parts for crafts can also be produced with it, such as brackets or closure blocks. Anyone who prints frequently and needs to compensate for wear will have a replacement readily available.\u003c\/p\u003e \u003cp\u003eTo replace the nozzle, the hotend is heated to operating temperature. It can then be unscrewed with a wrench and replaced with a new one. After purchase, the printer itself is still required unless one is already available.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe nozzle reaches temperatures of up to 300 °C during operation and causes severe burns. Avoid contact with the hot print head. The product is intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* 0.4mm extruder nozzle for 1.75mm filament\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045659218269,"sku":"F23106913","price":1.23,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/04mm-extruder-duese-fuer-175mm-filament-funduino-5178069.jpg?v=1791492397"},{"product_id":"22x-extruder-dusen-set-0-2-mm-1-0-mm-fur-1-75-mm-filament","title":"Nozzle set for 3D printers - 22 pieces, 0.2-1.0 mm, 1.75 mm filament","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e22 extruder nozzles for filament with a diameter of 1.75 mm\u003c\/li\u003e \u003cli\u003eOrifice diameters of 0.2 mm and 1.0 mm\u003c\/li\u003e \u003cli\u003eMade of brass\u003c\/li\u003e \u003cli\u003eFor 3D printers with standard hotend threads\u003c\/li\u003e \u003cli\u003eCan be replaced without special tools\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis set contains 22 extruder nozzles for replacement in 3D printers using 1.75 mm filament. The two orifice diameters cover different requirements. 0.2 mm produces fine details and smooth surfaces, while 1.0 mm enables faster prints with less diameter-related material removal. The brass construction conducts heat reliably and wears evenly.\u003c\/p\u003e \u003cp\u003eYou can switch between the orifice diameters without needing special tools. The standard hotend thread fits common 3D printers; compatibility depends solely on the filament diameter and thread length. Before installation, the hotend temperature should match the material; for standard plastics, the range is between 190 and 250 °C.\u003c\/p\u003e \u003cp\u003eTypical applications include switching between highly detailed miniature prints and prototypes where speed takes priority. Quick replacement is also useful when dealing with material wear. A worn 0.2 mm nozzle can be replaced with a new one without replacing the entire hotend assembly.\u003c\/p\u003e \u003cp\u003eThe nozzles require a compatible hotend system with a 1.75 mm filament inlet. Cleaning worn nozzles is possible, but often not worthwhile for fine orifice diameters; as wear parts, they should be replaced routinely.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe nozzles reach temperatures above 200 °C during printing. Only replace them after they have cooled completely, and avoid contact with the hot hotend assembly. This accessory is intended exclusively for use with 3D printers.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x extruder nozzle set for 1.75 mm filament with the following sizes:\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045660758365,"sku":"F23106583","price":8.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/22x-extruder-duesen-set-02-mm-10-mm-fuer-175-mm-filament-funduino-1536136.jpg?v=1791491853"},{"product_id":"0-2mm-extruder-duse-fur-1-75mm-filament","title":"Extruder nozzle 0.2 mm - brass, for 1.75 mm filament","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eReplacement nozzle for 3D printers with 1.75 mm filament\u003c\/li\u003e \u003cli\u003e0.2 mm nozzle diameter for fine print details\u003c\/li\u003e \u003cli\u003eHigh-temperature brass construction\u003c\/li\u003e \u003cli\u003eConical threaded interface for replacement without disassembly\u003c\/li\u003e \u003cli\u003eSuitable for standard hotend mounts\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis printer nozzle with a 0.2 mm opening enables prints with significantly finer structures than larger standard nozzles. The smaller outlet area requires longer print times while improving surface quality, especially in detailed areas with wall thicknesses below 1 mm.\u003c\/p\u003e \u003cp\u003eThe brass material reliably transfers heat from the heating block to the filament. To replace it, the nozzle is unscrewed from the hotend without having to remove other components, simplifying repairs. Calibration adjustments are necessary when switching from standard to smaller openings because the Z-offset must be readjusted.\u003c\/p\u003e \u003cp\u003eApplications include miniature figures with fine facial details, gears with small tooth cross-sections, handcrafted models with surface textures, and prototypes with thin-walled functional surfaces. The 0.2 mm nozzle remains unsuitable for large, fast prints.\u003c\/p\u003e \u003cp\u003eThe nozzle fits only printers standardized for 1.75 mm filament and equipped with a conical threaded connection. During operation, nozzle temperatures of at least 200 °C are required, depending on the filament material. Wear caused by abrasive materials such as carbon nanotubes enlarges the opening and requires replacement.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe nozzle reaches temperatures above 200 °C during printing and can cause burns; handle only after it has cooled completely. The product is intended exclusively for use with 3D printers and is not a toy. Disconnect the printer from the power supply before working on it and allow sufficient cooling time.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* 0.2 mm extruder nozzle for 1.75 mm filament\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045661282653,"sku":"F23107039","price":1.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/02mm-extruder-duese-fuer-175mm-filament-funduino-7245654.jpg?v=1791491298"},{"product_id":"funduino-druckbettbeschichtungrau-druckbettfolie-vergleichbar-mit-buildtak-310mm-x-310mm","title":"Funduino Rough Print Bed Film - self-adhesive, 310 x 310 mm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSelf-adhesive build surface film for 3D printers\u003c\/li\u003e \u003cli\u003eTextured surface for reliable print adhesion\u003c\/li\u003e \u003cli\u003eDimensions 310 * 310 mm, suitable for common build beds\u003c\/li\u003e \u003cli\u003eEasy to apply without tools or adhesive\u003c\/li\u003e \u003cli\u003eReusable after removal and cleaning\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis self-adhesive build surface film creates the rough surface needed to ensure that the print adheres securely and evenly to the bed. The textured coating provides grip without additional aids such as glue or sprays while printing.\u003c\/p\u003e \u003cp\u003eThe film can be applied to the build bed quickly, and no re-leveling is necessary afterward. Once printing is complete, the finished part can be removed easily. The material withstands multiple cycles before wear noticeably reduces adhesion.\u003c\/p\u003e \u003cp\u003eThe film fits build beds measuring 310 * 310 mm and works with common FDM printers of this type. For larger or differently sized beds, check whether the film fits or can be cut to size. The rough texture is particularly suitable for filaments such as PLA and PETG, which can easily slip on smooth surfaces.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe film contains no substances that are released during or after printing. When applying and removing it, watch out for sharp edges on the build bed to avoid cuts.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* Funduino \"Rough\" build surface coating, build surface film, comparable to BuildTak, 310mm x 310mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045661970781,"sku":"F23108878","price":9.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/funduino-druckbettbeschichtungrau-druckbettfolie-vergleichbar-mit-buildtak-310mm-x-310mm-funduino-2282549.jpg?v=1791492166"},{"product_id":"mk8-m6-extruder-duse-0-6mm-fur-1-75mm-filament-anet-creality","title":"MK8 Nozzle 0.6 mm - M6 thread, for 1.75 mm filament","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eNozzle for fused deposition modeling 3D printers\u003c\/li\u003e \u003cli\u003eDiameter: 0.6 mm\u003c\/li\u003e \u003cli\u003eSuitable for 1.75 mm filament diameter\u003c\/li\u003e \u003cli\u003eMK8 design with M6 thread\u003c\/li\u003e \u003cli\u003eSteel body with brass tip\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis nozzle with a 0.6 mm opening is designed for 3D printers that process 1.75 mm filament. It fits MK8 extruder heads and is secured with an M6 thread.\u003c\/p\u003e \u003cp\u003eThe smaller opening produces thinner layer heights than larger standard nozzles, resulting in greater print detail. At the same time, this requires more precise temperature control and longer print times. The steel construction with a brass tip allows regular cleaning without damaging the nozzle.\u003c\/p\u003e \u003cp\u003eThe 0.6 mm nozzle is suitable for detailed mechanical parts with tight tolerances, miniatures with fine structures, prototypes with thin walls, and testing optimal layer heights for applications between standard and fine-detail printing. Replacing the original equipment enables different levels of detail in your printer fleet.\u003c\/p\u003e \u003cp\u003eFor operation, the entire print head system, from the extruder loop to the printer mainboard, must be calibrated for 1.75 mm filament. A higher extrusion temperature and slower print speed are usually required. Replacement nozzles are recommended because smaller openings can become clogged more quickly by contaminants.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe nozzle reaches temperatures above 200 °C during printing. Maintenance and replacement work may only be carried out after the printer has been switched off and the nozzle has cooled down. Explosive gas formation is not expected, but the risk of burns and potentially sharp edges require caution.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cp\u003ePrinter nozzle 1 x 0.6 mm inlet diameter 1.75mm outlet diameter 0.6 mm screw thread: M6 hexagonal diameter: 6 mm\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045662822749,"sku":"F23107075","price":1.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/mk8-m6-extruder-duese-06mm-fuer-175mm-filament-anet-creality-funduino-7706970.jpg?v=1791492168"},{"product_id":"gt2-6-zahnriemen-meterware","title":"GT2 timing belt - 6 mm wide, 2 mm pitch, sold by the meter","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGT2-profile timing belt with 6 mm tooth spacing, sold by the meter for flexible length adjustment\u003c\/li\u003e \u003cli\u003e2 mm pitch, 1.27 mm tooth height according to ISO 13050 standard\u003c\/li\u003e \u003cli\u003e6 mm width, available continuously from 1 meter\u003c\/li\u003e \u003cli\u003eFiberglass-reinforced tooth flanks for reliable power transmission\u003c\/li\u003e \u003cli\u003eCompatible with standard GT2 gears and drive wheels\u003c\/li\u003e \u003cli\u003eTypical applications include 3D printers, CNC machines, and robotics projects\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis GT2 timing belt is used to transmit motion in drive systems. The belt sold by the meter allows you to purchase the required length without waste and adjust it on site if needed. The GT2 profile is widely used and operates reliably in machines with moderate speeds and forces.\u003c\/p\u003e \u003cp\u003eThe belt transmits power through its tooth flanks to standard gears with GT2 pitch. This eliminates the slip that can occur with flat belts. The fiberglass reinforcement makes the tooth flanks durable and dimensionally stable. With its 6 mm width, the belt fits the usual guides in 3D printers, plotters, and positioning systems.\u003c\/p\u003e \u003cp\u003eSold by the meter, it is practical for rapid prototyping applications, such as building custom CNC machines or retrofitting robot axes. This allows the X-axis belt of a DIY milling machine to be cut to the exact length instead of being purchased with excess length and trimmed. It can be tensioned similarly to prefabricated belts when the axes are properly aligned.\u003c\/p\u003e \u003cp\u003eProper installation requires a level, wear-free setup with the gears correctly aligned. The belt requires appropriate pretensioning; if it is too tight, its service life is reduced, while if it is too loose, it will skip. Contamination from dust or oil impairs the tooth flanks. One end must be sealed before use, for example by gluing or sewing, to prevent the belt from fraying.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis belt is not intended for installation in machines connected to mains voltage. It is intended exclusively for building prototypes and for testing and development projects. Exercise caution when installing it in operating drives or performing maintenance; moving belts can catch limbs. If in doubt, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x GT2-6 timing belt - sold by the meter\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045663871325,"sku":"F23108867","price":2.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gt2-6-zahnriemen-meterware-funduino-3495381.jpg?v=1791492760"},{"product_id":"master-messing-duse-fur-1-75-mm-filament-kompatibel-mit-e3d-volcano-hotends","title":"Brass nozzle 1.75 mm filament - for E3D Volcano hotend, 0.6-1.2 mm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eReplacement brass nozzle for 3D printers with 1.75 mm filament diameter\u003c\/li\u003e \u003cli\u003eMultiple variants with different opening cross-sections available\u003c\/li\u003e \u003cli\u003eThermal conductivity enables temperature equalization in the print zone\u003c\/li\u003e \u003cli\u003eThreaded connection for common printhead mounts\u003c\/li\u003e \u003cli\u003eWear component; regular replacement extends printhead service life\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe brass nozzle is the central wear component of a 3D printer using 1.75 mm filament and directly determines print quality. It is screwed into the printhead and functions by being heated to the printing temperature. As plastic passes through, solidification fronts and frictional heat are generated and must be transferred evenly into the material.\u003c\/p\u003e \u003cp\u003eBrass offers two key advantages here. Its thermal conductivity is approximately ten times better than that of steel alternatives, creating a stable temperature gradient in the print zone and preventing quality fluctuations caused by local overheating. At the same time, wear is significantly lower than with carbide, so the nozzle lasts longer before scratches impair the surface finish. Multiple opening cross-sections are available; thicker lines require larger diameters, which increases the throughput speed.\u003c\/p\u003e \u003cp\u003eIn practice, the nozzle is used with standard plastics such as PLA or PETG, where the process windows are relatively broad. More demanding materials such as filled plastics or carbon-reinforced types also benefit from the thermal conductivity because they are less prone to clogging. However, the finest prints with microdetails require the smallest diameters, which limits the maximum printing speed.\u003c\/p\u003e \u003cp\u003eThe nozzle is replaced after the printhead has cooled, using a wrench. Regular replacement requires a suitable ratchet wrench or pliers. Compatibility is limited to printers with a threaded printhead mount for this design. Adapters are available for many common models but are not included.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe nozzle is heated to over 200 °C during operation and can cause burns. All work on the printhead must be carried out only after it has cooled sufficiently or while wearing protective gloves. This component is intended exclusively for building prototypes and operating private 3D printers, not for industrial manufacturing systems.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x MK8 Extruder Nozzle for 1.75mm Filament\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"0.6 mm","offer_id":66045681434973,"sku":"F23109071","price":1.11,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":66045724950877,"sku":"F23109072","price":1.64,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm","offer_id":66045725213021,"sku":"F23109073","price":1.64,"currency_code":"EUR","in_stock":true},{"title":"1.2 mm","offer_id":66045725475165,"sku":"F23109078","price":1.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-messing-duese-fuer-175-mm-filament-kompatibel-mit-e3d-volcano-hotends-funduino-3567604.jpg?v=1791489966"},{"product_id":"t2-5-zahnriemen-meterware","title":"T2.5 timing belt - sold by the metre, width 6 mm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTiming belt with 5 mm tooth pitch (T2 profile)\u003c\/li\u003e \u003cli\u003eSold by the metre, can be cut to any length\u003c\/li\u003e \u003cli\u003eWidth 6 mm\u003c\/li\u003e \u003cli\u003eTiming belt width 12 mm\u003c\/li\u003e \u003cli\u003ePlastic timing belt with steel flex core\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe T2 timing belt with a 5 mm tooth pitch is sold by the metre for small to medium drive solutions in prototypes and DIY projects. The timing belt can be cut to the required length, without leftover sections causing wear or the need to source new components.\u003c\/p\u003e \u003cp\u003eThe plastic material with an embedded steel flex core provides sufficient rigidity for straight runs while also allowing tight radii in arrangements with many curves. The 6 mm width at a timing belt width of 12 mm fits standard small gears and idler pulleys. Calibration is not required.\u003c\/p\u003e \u003cp\u003eTypical applications include driving model vehicles, operating axes in 3D printers and similar fabber machines, and small conveyor belts in laboratory setups. Sold-by-the-metre material is also useful as a replacement part when existing drives show gradual signs of wear.\u003c\/p\u003e \u003cp\u003eCutting is done with a sharp knife or scissors; deformed cut ends can easily be reworked. Suitable gears and pulleys must be sourced separately. The maximum circumferential speed depends on the load and design of the driven component.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe timing belt is not intended for use in machines that fall under the Machinery Directive or in systems with significant safety requirements. It is intended exclusively for prototypes and testing and development purposes. When testing at high speeds or under high loads, ensure that surrounding parts, clothing, and limbs cannot come into contact with the moving belt.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045681566045,"sku":"F23108601","price":3.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/t25-zahnriemen-meterware-funduino-5514316.jpg?v=1791491977"},{"product_id":"sbr12uu-lagerblock-gleitblock-fur-linearfuhrung-3d-drucker","title":"SBR12UU bearing block - 12 mm linear guide, up to 300 N","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSlide block for linear guides with a 12 mm rail profile\u003c\/li\u003e \u003cli\u003eOpen design with steel balls for movement in one plane\u003c\/li\u003e \u003cli\u003eLoad capacity of approximately 300 N\u003c\/li\u003e \u003cli\u003eApproximately 30 mm wide and 21 mm high\u003c\/li\u003e \u003cli\u003eUses the standard SBR12 rail profile\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe SBR12UU is a slide block for linear guides that enables movement on a rail with a 12 mm profile cross-section. It uses steel balls as rolling elements and therefore requires regular running-in or oiling to operate with reasonable resistance.\u003c\/p\u003e \u003cp\u003eWith a permissible load of approximately 300 N, the block is suitable for light to medium-duty applications such as model making, simple automation systems, or prototype construction. The open design makes it easy to maintain and cost-effective, but it does not provide protection against contamination.\u003c\/p\u003e \u003cp\u003eThe block fits the standard SBR12 rail profile and works with the guide rails commonly used for it. For operation, the rail must be mounted level and the system must be maintained with suitable oil or grease.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe block may jump out of the rail if improperly installed or overloaded. Moving parts should not be touched during operation. Work on the linear guide is intended for prototyping and development purposes.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x SBR12UU slide block for 3D printers\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045684711773,"sku":"F23106405","price":4.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/sbr12uu-lagerblock-gleitblock-fuer-linearfuehrung-3d-drucker-funduino-9354159.png?v=1791493069"},{"product_id":"drag-chain-schleppkette-kabelfuhrung-kabelkanal-15mm-x-20mm","title":"Drag chain 15 x 20 mm - plastic cable guide","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlastic drag chain for cable routing\u003c\/li\u003e \u003cli\u003eLength 1 m\u003c\/li\u003e \u003cli\u003eInternal height 40 mm, internal width 50 mm\u003c\/li\u003e \u003cli\u003e1:1 scale for industrial applications or models\u003c\/li\u003e \u003cli\u003eModular plug-in system for linking chains\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eA drag chain is used to guide and protect cables, hoses, and lines along moving machine components. It prevents damage caused by tensile stress, wear, and tangling. This 1 m plastic version is suitable for building test systems, model machines, and smaller industrial prototypes.\u003c\/p\u003e \u003cp\u003eThe principle is based on connecting individual links that move one after another without crushing or damaging their contents. With internal dimensions of 50 mm in width and 40 mm in height, typical ribbon cables, multiple individual wires, and thin hoses can be routed in parallel. The modular plug-in connection allows additional chain links to be purchased for individually extending the length.\u003c\/p\u003e \u003cp\u003eThe drag chain is used in CNC machines with moving tool heads, X-Y positioning systems, robot designs with swiveling arms, and manufacturing test systems that must route measurement cables or power supplies to a moving component. In larger model projects, the chain also reliably protects wiring from mechanical stress.\u003c\/p\u003e \u003cp\u003eApplications involving extremely high movement speeds or very long chain runs require systems made of steel or aluminum, which are not included here. The drag chain is not required for stationary installations; simpler cable ducts are sufficient in such cases. Connection to the moving machine is made using suitable mounts, which must be purchased separately.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe drag chain is intended exclusively for building prototypes and for testing and development purposes. It is not designed for installation in household electrical circuits. Before integration into operating machine systems, ensure that all electrical connections are inspected by a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1*  Drag Chain \/ Cable Guide \/ Cable Duct 15mm x 20mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045687595357,"sku":"F23107152","price":11.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/drag-chain-schleppkette-kabelfuehrung-kabelkanal-15mm-x-20mm-funduino-3698835.png?v=1791493014"},{"product_id":"push-fitting-fur-1-75mm-filament-m6-4mm-schlauch-creality-funduino-pro","title":"Push fitting M6 - 1.75 mm filament, 4 mm tube, for Creality","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePush fitting for 1.75-mm filament with M6 thread\u003c\/li\u003e \u003cli\u003eConnection for 4-mm tubing\u003c\/li\u003e \u003cli\u003ePush-fitting system for quick and secure connections\u003c\/li\u003e \u003cli\u003eSuitable for 3D printers and filament feed systems\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eA push fitting with a push-fitting system connects 1.75-mm filament to 4-mm tubing via an M6 threaded socket. The system operates on the compression principle: the filament is inserted into the fitting, where an internal clamping sleeve holds it securely in place.\u003c\/p\u003e \u003cp\u003eThe M6 thread enables integration into existing 3D printer systems and feed units with a standardized interface. The push-fitting design eliminates the need for screws at the tubing connection, simplifying installation and removal while providing a reliable seal.\u003c\/p\u003e \u003cp\u003eThis connector is used in the filament feed of FDM printers, in Bowden hotend systems to bridge the gap between the extruder and print head, and in modular printer conversions. Multiple units can be used to equip multi-filament printers.\u003c\/p\u003e \u003cp\u003eThe fitting requires 4-mm tubing, which must be obtained separately. Ensure that the filament is correctly aligned when inserting it to prevent jamming.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis connecting element is intended exclusively for assembling 3D printer systems and for testing and development purposes. It is not intended for operation in household electrical circuits. If you are unsure how to handle or correctly integrate it, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* push fitting for 1.75 mm filament, M6, 4 mm tubing - Creality, Funduino Pro\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045688873309,"sku":"F23106923","price":1.23,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/push-fitting-fuer-175mm-filament-m6-4mm-schlauch-creality-funduino-pro-funduino-2856071.jpg?v=1791492909"}],"url":"https:\/\/funduino.com\/en\/collections\/mechanics-3d-printing.oembed","provider":"Funduino","version":"1.0","type":"link"}