{"title":"Kits","description":null,"products":[{"product_id":"smd-lotubung-mit-led","title":"SMD soldering practice board - training board with LED","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTraining board with LED for practicing SMD soldering techniques\u003c\/li\u003e \u003cli\u003eAssembly using surface-mount technology (SMD)\u003c\/li\u003e \u003cli\u003eLED indicates successful soldering by lighting up\u003c\/li\u003e \u003cli\u003eLimited soldering areas for targeted assembly\u003c\/li\u003e \u003cli\u003eSimple circuit design for beginners\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis training board with SMD components and LED is designed as an introduction to surface-mount soldering. The circuit design is deliberately kept simple so that full attention can be focused on soldering techniques and component identification.\u003c\/p\u003e \u003cp\u003eThe properly soldered LED lights up and immediately indicates whether all solder connections are functional. This supports learning success because the quality of the soldering work is immediately apparent and does not need to be checked with test equipment first.\u003c\/p\u003e \u003cp\u003eThe module is suitable for training sessions in which beginners learn SMD soldering techniques, as well as for hobbyists who want to familiarize themselves with this assembly method. Experienced solderers can use similar training modules to develop their skills.\u003c\/p\u003e \u003cp\u003eSMD-compatible tools and a suitable power supply are required for soldering. Practice involves small electronic components, which should be handled safely.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eSoldering generates heat and fumes, so adequate ventilation and appropriate protective equipment must be provided. This training module is intended exclusively for practicing soldering techniques in educational settings and for development purposes. Work on or near domestic electrical installations is reserved for qualified electricians; consult a qualified electrician before commissioning if you have questions about the power supply or operation.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e20x 0805 resistor\u003c\/li\u003e \u003cli\u003e20x 0603 resistor\u003c\/li\u003e \u003cli\u003e10x 1206 resistor\u003c\/li\u003e \u003cli\u003e4x 1206 diode\u003c\/li\u003e \u003cli\u003e1x 0805 diode\u003c\/li\u003e \u003cli\u003e6x SOT-23 transistor\u003c\/li\u003e \u003cli\u003e1x SOP16 IC\u003c\/li\u003e \u003cli\u003e1x PCB board\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997807550813,"sku":"F23106010","price":2.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/smd-loetuebung-mit-led-funduino-4471502.png?v=1791493518"},{"product_id":"diy-bausatz-holz-auto-mit-fernbedienung-c-20a","title":"Wooden car kit C-20 A - remote-controlled, with batteries","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWooden kit for a remote-controlled car with remote control\u003c\/li\u003e \u003cli\u003eSuitable for beginners and children\u003c\/li\u003e \u003cli\u003eEnvironmentally friendly materials and sustainable design\u003c\/li\u003e \u003cli\u003eEasy assembly without special tools\u003c\/li\u003e \u003cli\u003eBatteries and remote control included\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis wooden kit contains all the components needed to assemble a remote-controlled car with a genuine wooden construction. The vehicle is assembled by hand and then controlled with the remote control included in the set. What makes this project special is the use of wood as a material, providing sustainability and a direct connection to basic craftsmanship.\u003c\/p\u003e \u003cp\u003eThe car is powered by a motor controlled via the remote control. The remote control and a battery pack are already included, so you can start playing immediately after assembly. No complicated soldering techniques or electronic programming are required, making this kit an ideal introduction to mechanical principles.\u003c\/p\u003e \u003cp\u003eThe kit is ideal for gaining first experience with technical projects at school age, for example in after-school clubs, holiday camps, or as an introductory project in robotics classes. It is also suitable as a weekend project for parents and children, offering an opportunity to develop practical skills and then use a working vehicle.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis product is a kit for educational and demonstration purposes. Assembly must be carried out under adult supervision. The finished car is designed only for use indoors and in sheltered outdoor areas and is not suitable for road traffic.\u003c\/p\u003e \u003ch4\u003eContents\u003c\/h4\u003e \u003cp\u003eThe kit is ideal for gaining first experience with technical projects at school age, for example in after-school clubs, holiday camps, or as an introductory project in robotics classes. It is also suitable as a weekend project for parents and children, offering an opportunity to develop practical skills and then use a working vehicle.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997813547357,"sku":"F23110109","price":5.94,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/diy-bausatz-holz-auto-mit-fernbedienung-c-20a-funduino-9599326.png?v=1791493915"},{"product_id":"bausatz-kriechende-raupe-fahrzeug","title":"Crawling caterpillar robot kit - 4 legs, 2.4 GHz radio remote control","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eKit for a four-legged vehicle with crawling and climbing movements\u003c\/li\u003e \u003cli\u003eMotorized drives for articulated legs, controlled by a microcontroller\u003c\/li\u003e \u003cli\u003eAssembly without a soldering iron, plug-in system with magnetic coupling\u003c\/li\u003e \u003cli\u003eWireless remote control via a 2.4 GHz radio module\u003c\/li\u003e \u003cli\u003eSuitable for beginners with a basic understanding of electronics\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA four-legged crawling vehicle is assembled from a kit containing prefabricated plastic parts and electronic modules. The vehicle imitates natural movement patterns by sequentially controlling the joints of its legs with four motors, thereby creating a crawling or climbing pattern. Assembly is carried out using a plug-in system, without the need for a soldering iron. The magnetic coupling between the modules provides secure connections that can still be opened quickly for modifications and maintenance.\u003c\/p\u003e \u003cp\u003eA simple microcontroller handles the control, managing its program and coordinating the timing of the four motor voltages. A wireless remote control sends commands to the vehicle via the 2.4 GHz radio module. Anyone wishing to program their own movement patterns can access the controller's basic functions; the development environment is available free of charge.\u003c\/p\u003e \u003cp\u003eApplications include hobby projects, where movement patterns and machine control can be explored playfully, as well as classroom instruction for teaching mechanics and control logic. The vehicle is also suitable for studying biological locomotion patterns and their technical implementation. Thanks to its construction, the caterpillar can overcome obstacles up to approximately 20 centimetres high; areas that are difficult to access remain out of reach for the vehicle.\u003c\/p\u003e \u003cp\u003eThe power supply is provided by built-in rechargeable batteries, whose charging time is specified in the data sheet. The wireless range depends on the environment and decreases significantly in the presence of sources of interference. Before initial operation, the gears and motor shafts must be installed, which takes approximately two hours and requires only hand tools.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eOperation is permitted exclusively with the included power supply; connection to the mains or use of higher voltages is prohibited. This kit is intended for building prototypes and for educational purposes; it is not intended for use in production environments or as a toy for young children. If there is any uncertainty, work on the electronics should be inspected by a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Crawling Caterpillar - Vehicle Kit\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997822787933,"sku":"F23107391","price":3.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/bausatz-kriechende-raupe-fahrzeug-funduino-8012456.png?v=1791494678"},{"product_id":"rad-felge-mit-gummilaufflache-fur-360-servos","title":"Wheel for 360° servo - rim with rubber tread, Ø 60 mm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eRubber tread on a plastic rim, compatible with 360-degree servos\u003c\/li\u003e \u003cli\u003eDiameter 60 mm, width 9 mm\u003c\/li\u003e \u003cli\u003eEnhanced traction through a textured surface\u003c\/li\u003e \u003cli\u003eFor use in mobile robots and powered chassis\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe wheel with a rubber tread mounts onto servos that rotate continuously. The 60 mm diameter provides good traction for compact chassis. The textured rubber surface generates sufficient friction for reliable propulsion on various surfaces.\u003c\/p\u003e \u003cp\u003eWhen directly coupled to a 360-degree servo, the wheel requires no additional mounting beyond the standard servo interface. The 9 mm width fits common servo output shafts and allows for easy push-fitting or screw mounting. Whether used in a rolling robot or a smaller wheel-driven vehicle, this wheel provides the servo with direct power transmission to the driving surface.\u003c\/p\u003e \u003cp\u003eBuilding projects with multiple 360-degree servos is accelerated by the ready-made tread; an expensive gearbox is unnecessary, and the wheel reduces the load on the motor with direct surface grip. However, the limitations are clear, as very high torque, bumps, and lateral compression can damage the rubber structure. On level, moderate surfaces with typical robot weights, the wheel operates reliably.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis component is intended exclusively for building prototypes and robot projects. Working on servo motors and their mounting requires care during mechanical assembly. Before commissioning, ensure that the wheel is securely attached and that there are no sharp edges or holes.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cp\u003e1x wheel \/ rim with rubber tread for 360° servos\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997825638749,"sku":"F23105825","price":1.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/rad-felge-mit-gummilaufflaeche-fuer-360-servos-funduino-9529797.png?v=1791493596"},{"product_id":"yfrobot-chassis-kit-mit-lenkachse","title":"YFROBOT chassis kit - steering axle, 2 drive wheels Ø 48 mm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlastic chassis with steering axle and two driven wheels\u003c\/li\u003e \u003cli\u003eWheelbase 67 mm, track width 55 mm\u003c\/li\u003e \u003cli\u003eWheel size 48 mm, mounting holes for M3\/M4 geared motors\u003c\/li\u003e \u003cli\u003eMounting option for servo steering using a hole pattern\u003c\/li\u003e \u003cli\u003eSpace requirement under a 100*70 mm footprint\u003c\/li\u003e \u003cli\u003eWeight approximately 45 g without drive electronics\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis plastic chassis serves as a mechanical base for autonomous small robots and steerable model vehicles. The design uses two independently driven rear wheels and a servo-steered front axle for intuitive maneuvering and cornering.\u003c\/p\u003e \u003cp\u003eThe chassis combines precisely positioned holes for standard geared motors with an adaptable servo mount, simplifying access to commercially available drive electronics. Its small dimensions also allow for compact project builds where space is limited. Anyone looking to give mobile robots or remote-controlled vehicles a simple foundation will find a proven basic design here.\u003c\/p\u003e \u003cp\u003eThe two driven wheels enable straight-line travel and turning on the spot, while the servo allows steering angles of up to approximately 30 degrees via the articulated front axle. The 67 mm wheelbase provides stable support on level surfaces with a moderate turning radius. This makes the chassis suitable for indoor projects, smooth floors or carpets, and competition robotics with size restrictions.\u003c\/p\u003e \u003cp\u003eOperation requires two geared motors with M3 or M4 screws, a servo motor, a power supply for both types of motors, and a microcontroller platform for control. Rough or steeply inclined surfaces may exceed the capabilities of the small design; the wheels are intended for normal surfaces.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe chassis is intended exclusively for building prototypes and for testing and development purposes, not for use in production environments or with machinery. During assembly and operation with electric drives, observe the safety requirements of the motors and power sources used. If you have questions about integration into more complex systems or about the power supply, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cp\u003eThe chassis is supplied as a kit and must be assembled yourself. Package weight: approx. 750g\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997830783325,"sku":"F23106830","price":49.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/yfrobot-chassis-kit-mit-lenkachse-funduino-8324136.jpg?v=1791493613"},{"product_id":"lotubung-d2-1-linienverfolgung-smart-car","title":"Soldering practice D2-1 Smart Car - line following with IR sensors","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eRemote-controlled vehicle for developing and programming line-following algorithms\u003c\/li\u003e \u003cli\u003ePlastic chassis base with two electric motors and gears\u003c\/li\u003e \u003cli\u003eFour AA battery holders for powering the chassis\u003c\/li\u003e \u003cli\u003eInfrared sensors for detecting black lines on a light-colored surface\u003c\/li\u003e \u003cli\u003eCompatible with common microcontroller boards via digital and analog inputs\u003c\/li\u003e \u003cli\u003ePreassembled, supplied without batteries and without a controller board\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe Smart Car is a line-following vehicle for developing sensor and control algorithms. It consists of a two-wheeled plastic chassis with two independently controlled electric motors that drive the wheels through gears. This makes it possible to handle curves and turns by using different motor speeds.\u003c\/p\u003e \u003cp\u003eThe infrared sensors detect the contrast between a black line and a light-colored surface. Their output signals are available in analog or digital form, allowing them to be connected directly to the digital or analog inputs of a microcontroller board. The motors are controlled via MOSFET drivers on the same board.\u003c\/p\u003e \u003cp\u003eThe chassis is powered by four AA batteries. Typical applications include autonomous vehicles on predefined tracks, such as course routes or transport lines in warehouse simulations. The fundamentals of control loops can also be explored in practice by having a sensor measure the deviation from the line while the controller adjusts the motor power accordingly.\u003c\/p\u003e \u003cp\u003eAssembly requires basic knowledge of electronics. The vehicle is supplied without batteries for the battery holder and additionally requires a microcontroller board and a motor driver IC for controlling the motors. Black-line tracks must be purchased separately or built yourself.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe vehicle is intended exclusively for assembly, testing, and development purposes and is not designed for continuous operation or outdoor use. Batteries and the motor driver IC must be connected with the correct polarity and operating voltage; if in doubt, consult a qualified electrician before commissioning. Children require supervision when handling small parts and batteries.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cp\u003eIncluded. Color variations possible!\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997830979933,"sku":"F23107860","price":4.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-d2-1-linienverfolgung-smart-car-funduino-1675461.png?v=1791494697"},{"product_id":"diy-bausatz-holz-gelandewagen","title":"Wooden off-road vehicle kit - four-wheel drive, IR remote control","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWooden vehicle kit with four driven wheels\u003c\/li\u003e \u003cli\u003eDimensions of approximately 20 * 12 * 10 cm after assembly\u003c\/li\u003e \u003cli\u003ePowered by two geared DC motors\u003c\/li\u003e \u003cli\u003eRemote control via infrared remote control\u003c\/li\u003e \u003cli\u003eBattery compartment for four AA batteries\u003c\/li\u003e \u003cli\u003ePlywood parts for sawing, gluing, and screwing\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis wooden off-road vehicle can be assembled from prefabricated plywood parts and combines hands-on work with a functional drive system. The vehicle is powered by two DC motors that transfer power to all four wheels via a gearbox, enabling it to handle uneven terrain.\u003c\/p\u003e \u003cp\u003eAssembly requires sawing, gluing, and screwing the individual components together. The two motors are controlled via an infrared remote control, which regulates the driving direction and speed. The vehicle is suitable for off-road driving on meadows and uneven surfaces with moderate inclines, but remains maneuverable on paved paths.\u003c\/p\u003e \u003cp\u003eFour AA batteries are required for operation and fit into the integrated battery compartment. The remote control is powered separately by batteries. A saw, screwdriver, and glue are required for assembly; a drill and sander make the work easier but are not essential. The finished vehicle measures approximately 20 * 12 * 10 centimeters.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe kit is intended exclusively for assembly and operation as a toy and educational project, not for use on public roads. Appropriate safety measures are required when sawing and drilling the wooden parts; children must be supervised by adults. If you have questions about the safe use of tools, consult a qualified person.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x DIY wooden off-road vehicle kit, including illustrated instructions\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997831045469,"sku":"F23110131","price":3.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/diy-bausatz-holz-gelaendewagen-funduino-5582426.jpg?v=1791494693"},{"product_id":"aufzug-bausatz-aus-holz-mit-elektromotor-diy","title":"Wooden elevator kit - with electric motor, 20 x 20 x 60 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWooden construction kit for a functional elevator with an integrated electric motor\u003c\/li\u003e \u003cli\u003eMotor drive with a cable system for vertical movement\u003c\/li\u003e \u003cli\u003eDimensions approximately 20 * 20 * 60 cm after assembly\u003c\/li\u003e \u003cli\u003eSuitable for children aged 10 and over and hobbyists\u003c\/li\u003e \u003cli\u003eWooden parts must be glued and screwed together\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis wooden construction kit demonstrates how an elevator works through hands-on assembly. The electric motor drives a cabin up and down via a cable pulley; the cabin is guided within a wooden structure. The mechanism clearly demonstrates how motor power is converted into controlled movement.\u003c\/p\u003e \u003cp\u003eThe kit contains prepared wooden parts that are connected using glue and screws. The motor is powered by a battery or a stable power supply. Control is provided by a simple on\/off switch or, optionally, by a switching device that allows the direction and speed to be regulated.\u003c\/p\u003e \u003cp\u003eApplications include school projects on mechanics and electrical engineering, private STEM experiments as a hobby, and exhibitions in museums or workshops. The kit is particularly suitable for school work groups, where several people can explore the assembly and operation together.\u003c\/p\u003e \u003cp\u003eBasic tools such as a drill, screwdriver, and saw are required for assembly. The power supply must be purchased separately if it is not included in the package. Heavy loads or continuous operation for several hours are not intended.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe motor must not be connected directly to mains voltage; use only direct current or battery power. The kit is intended exclusively for assembly for demonstration and educational purposes. Safety precautions are required when working with the drill or using power tools.\u003c\/p\u003e \u003ch4\u003ePackage Contents\u003c\/h4\u003e \u003cp\u003eincluded. Heavy loads or continuous operation for several hours are not intended.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997831405917,"sku":"F23110129","price":3.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/aufzug-bausatz-aus-holz-mit-elektromotor-diy-funduino-9021416.png?v=1791493157"},{"product_id":"propellerauto-bausatz-mit-elektromotor","title":"Propeller car kit - electric motor, 3-4.5 V, solder-free","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eVehicle kit with electric motor and propeller drive\u003c\/li\u003e \u003cli\u003e3 V DC motor power, ready for quick assembly\u003c\/li\u003e \u003cli\u003ePlastic body with integrated wheels and propeller mount\u003c\/li\u003e \u003cli\u003eOperating voltage of 3 to 4.5 V supplied by two or three AA batteries\u003c\/li\u003e \u003cli\u003eAssembly possible without soldering\u003c\/li\u003e \u003cli\u003eIdea kit for drive mechanisms and motor applications\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe propeller car kit combines a small electric motor with a driveable plastic model that moves using propeller propulsion. Assembly requires only a few steps and basic hand tools.\u003c\/p\u003e \u003cp\u003eThe motor operates with a voltage of 3 to 4.5 volts, corresponding to two or three AA batteries. The power supply is connected directly to the motor, so no separate control board is required. The system is ready for use immediately after assembly.\u003c\/p\u003e \u003cp\u003eThe kit is suitable for practically exploring motor applications and drive concepts in the classroom or during initial electronics projects. Anyone who wants to understand vehicle mechanisms or the conversion of electrical energy into motion can work with this kit without programming or complex wiring.\u003c\/p\u003e \u003cp\u003eAA batteries are required for operation but are not included. The model is designed for use on flat surfaces and is not weatherproof.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe propeller mechanisms generate rotational forces; keep hair, clothing, and fingers away. The kit is not intended for operation on household power circuits and is intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Propeller car kit with electric motor\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997839565149,"sku":"F23107958","price":3.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/propellerauto-bausatz-mit-elektromotor-funduino-4364337.png?v=1791493644"},{"product_id":"kamerahalterung-gimbal-mit-zwei-achsen-fur-2x-mg90-servo","title":"Gimbal camera mount - 2 axes for 2x MG90 servo, up to 500 g","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTwo-axis gimbal for stabilizing cameras on drones or mobile robots\u003c\/li\u003e \u003cli\u003eLoad capacity of up to 500 g, suitable for compact and lightweight action cameras\u003c\/li\u003e \u003cli\u003eControl via two separate servo motors (MG9)\u003c\/li\u003e \u003cli\u003ePan range: tilt 90 degrees, yaw 180 degrees\u003c\/li\u003e \u003cli\u003eMounting via quick-release plate or adhesive mounting\u003c\/li\u003e \u003cli\u003ePlastic construction with integrated ball bearings\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eA two-axis gimbal stabilizes cameras using two independently controlled servo motors, removing camera shake during flight or compensating for movements of the carrier platform. The two MG9 motors enable panning movements in tilt and yaw, while a third degree of freedom (roll) remains mechanically fixed. The mount is designed for cameras weighing up to approximately 500 grams.\u003c\/p\u003e \u003cp\u003eThe tilt range covers 90 degrees, while the yaw range reaches 180 degrees. These axis ranges provide the framework for scenarios such as smooth pans over a person being tracked, stable overhead shots while the quadcopter rotates, or gentle camera movements on ground-based platforms. The faster the servos are driven and the more intense the system's base movement, the more the gimbal must compensate through counter-movement.\u003c\/p\u003e \u003cp\u003eTo operate it, two servo control channels are required on the flight controller or robot board, typically using PWM signals (pulse-width modulation). The camera is mounted using a quick-release plate or adhesive mounting; for heavier setups with greater torque, a secure mounting and balancing are recommended. Before operation, the gimbal should be set to the neutral position so that the servos do not move to their end positions while uncalibrated.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eWhen wiring and commissioning the device, the servo motors must not be driven against their mechanical end positions in order to prevent damage. The gimbal is intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x camera mount \/ two-axis gimbal\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997840154973,"sku":"F23106409","price":1.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kamerahalterung-gimbal-mit-zwei-achsen-fuer-2x-mg90-servo-funduino-5301107.jpg?v=1791493648"},{"product_id":"chassis-komplettset-fur-arduino-mit-microcontroller","title":"Complete chassis set - 2 geared motors, wheels, battery compartment","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eVehicle chassis with drivetrain for Arduino boards\u003c\/li\u003e \u003cli\u003eTwo geared motors with mechanical interfaces\u003c\/li\u003e \u003cli\u003eWheels with tires and axles installed\u003c\/li\u003e \u003cli\u003eBattery compartment for four AA cells\u003c\/li\u003e \u003cli\u003eMounting options for sensor and control modules\u003c\/li\u003e \u003cli\u003eConnection cable to the Arduino interface prewired\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis chassis set forms the mechanical foundation for mobile robot projects with Arduino-based controllers. It contains the complete drivetrain with two geared motors whose speeds can be controlled independently, a prerequisite for steering movements and precise driving maneuvers.\u003c\/p\u003e \u003cp\u003eThe motors are powered by four AA batteries in the integrated compartment. The contacts are connected to the preinstalled terminals, which can be connected directly to an Arduino board or an intermediate motor controller. This setup saves wiring time during everyday project work.\u003c\/p\u003e \u003cp\u003eThe chassis is suitable for mobile robots designed to detect obstacles, follow lines, or respond to radio commands. Additional sensors such as ultrasonic modules or light sensors expand its functionality without requiring structural modifications to the basic frame. Additional modules can be mounted in the designated mounting areas for object detection or triggering tasks.\u003c\/p\u003e \u003cp\u003eOperation requires an Arduino board, a motor controller for regulating the motors' voltage, and batteries. The motor controller is necessary because the Arduino cannot provide the required current through its I\/O pins. Programming and sensor expansions depend on the selected controller board and the individual project objectives.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe motors draw significant amounts of current under load; a dedicated motor controller must be connected between them, as directly connecting them to Arduino pins will damage the board. The device is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in the household power circuit.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eComplete chassis set for Arduino\u003c\/li\u003e \u003cli\u003eFun project for Arduino beginners\u003c\/li\u003e \u003cli\u003eIdeal for time-limited project work, project weeks, and much more\u003c\/li\u003e \u003cli\u003eContains the most common components in Arduino-based microelectronics\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997850050909,"sku":"F23105900","price":34.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/chassis-komplettset-fuer-arduino-mit-microcontroller-funduino-9689530.png?v=1791494081"},{"product_id":"auto-bausatz-mit-elektromotor-und-batteriekasten","title":"Car kit - with electric motor and battery holder","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eVehicle kit with electric motor and battery box\u003c\/li\u003e \u003cli\u003eMotor power and power supply determine the driving speed and range\u003c\/li\u003e \u003cli\u003eIndividual parts can be assembled without special tools\u003c\/li\u003e \u003cli\u003eWheels and body parts made of durable plastic\u003c\/li\u003e \u003cli\u003eCan be upgraded for projects with autonomous control\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis vehicle kit combines a motor, battery compartment, and chassis into a mobile basic platform. The electric motor is powered directly by the batteries and drives the wheels, while the integrated battery box design keeps the center of gravity low.\u003c\/p\u003e \u003cp\u003eAssembly requires no special skills, as all plastic components fit together and the electrical connections are made using plugs. Changes to the motor power or power supply directly affect the speed and operating time.\u003c\/p\u003e \u003cp\u003eThe kit is suitable for initial manual driving tests, for setting up simple obstacle courses, or as a basis for subsequently adding a control board with sensors and wireless communication. Anyone who later wants to build an autonomous vehicle can control the motor via a controller board with motor drivers and attach distance sensors to the chassis.\u003c\/p\u003e \u003cp\u003eBatteries with the specified voltage and capacity are required; the body's battery box design determines which battery types fit. Motor-controlled projects also require a microcontroller board and a motor driver module.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe kit is intended exclusively for building prototypes and for testing and development purposes. When making modifications or integrating electrical components, ensure correct battery polarity and safe wiring to prevent short circuits. If in doubt, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* Car kit with electric motor and battery box\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997860241757,"sku":"F23106814","price":5.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/auto-bausatz-mit-elektromotor-und-batteriekasten-funduino-9602427.jpg?v=1791494788"},{"product_id":"handkurbel-generator-bausatz","title":"Hand-crank generator kit - up to 3 V, with LED","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eKit for generating electricity with a hand crank\u003c\/li\u003e \u003cli\u003eOutput voltage up to 3 V\u003c\/li\u003e \u003cli\u003eGear drive with a DC motor serving as a generator\u003c\/li\u003e \u003cli\u003eLED load included in the set\u003c\/li\u003e \u003cli\u003eCrank handle and plastic frame\u003c\/li\u003e \u003cli\u003eNo external power supply required\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA hand-crank generator demonstrates in compact form how mechanical energy is converted into electrical voltage. The kit connects a crank to a DC motor via a gear drive, with the motor functioning as a generator. An LED wired to the motor visibly demonstrates the operating principle.\u003c\/p\u003e \u003cp\u003eWhen the crank is turned, the gear drive powers the motor, whose rotating winding generates a voltage of up to 3 V in a magnetic field. This DC voltage is sufficient to make the LED light up. The voltage level depends on the cranking speed; turning faster produces brighter light.\u003c\/p\u003e \u003cp\u003eIn physics lessons, the kit provides a direct demonstration of electromagnetic induction without the need for external energy sources. The model is also suitable for initial experiments with generators and for explaining electrical circuits. The setup operates independently of power sources, as the hand crank alone supplies the necessary mechanical energy.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe kit is intended exclusively for demonstration purposes as well as testing and learning projects and is not suitable for installation in household electrical circuits or for practical operation of devices. Adult supervision is required when children are using it. If the electrical components are damaged, consult a qualified electrician before further use.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Hand Crank Generator - Kit\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997862011229,"sku":"F23107435","price":4.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/handkurbel-generator-bausatz-funduino-6462500.png?v=1791493755"},{"product_id":"lotubung-gerauschgenerator-mit-22ams13-und-22ams13-chip-4-schalter-lautsprecher","title":"Soldering practice sound generator - 22AMS13 chip, 4 switches, speaker","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSoldering practice module with integrated sound generator\u003c\/li\u003e \u003cli\u003eTrains soldering skills through hands-on soldering of components\u003c\/li\u003e \u003cli\u003eTwo specialized chips for sound output and acoustic feedback\u003c\/li\u003e \u003cli\u003eConfirmation of successful solder joints through sounds\u003c\/li\u003e \u003cli\u003eSuitable for beginners and training groups\u003c\/li\u003e \u003cli\u003eNo external power supply required\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis soldering practice module introduces the basic techniques of soldering with immediate acoustic feedback. The two integrated components, 22AMS13 and 22AM, generate sounds as feedback when solder joints have been made correctly. This creates a playful learning principle in which success can be heard immediately.\u003c\/p\u003e \u003cp\u003eThe module is soldered together point by point. Each completed connection triggers the sound generator, which emits an acoustic signal. This direct feedback helps assess the quality of your work immediately and quickly identify errors. Repeated practice builds confidence in the sequence of actions and in handling the soldering iron and solder.\u003c\/p\u003e \u003cp\u003eSuch modules are used in school courses to introduce groups to soldering, or in maker workshops for beginners. The module also provides a motivating introduction in school electronics clubs. The sound output makes faulty solder joints quickly apparent: if a connection has not been made correctly, the signal does not sound.\u003c\/p\u003e \u003cp\u003eOnly a soldering iron and solder are required for operation. The module itself already contains all the necessary components for sound generation and signal processing.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eSoldering generates heat and fumes; ensure adequate ventilation and use suitable protective equipment. This module is intended exclusively for soldering practice as part of training, instruction, and development. If you have questions about carrying out soldering work safely, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Soldering Practice - Sound Generator with 22AMS13 and 22AMS13 Chip, 4 Switches, Speaker\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997863289181,"sku":"F23106289","price":3.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-geraeuschgenerator-mit-22ams13-und-22ams13-chip-4-schalter-lautsprecher-funduino-7343698.png?v=1791494209"},{"product_id":"propellerfahrzeug-bausatz-mit-einem-propeller-2xaa-3v","title":"Propeller vehicle kit - 2x AA, 3 V, solder-free","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eVehicle kit with propeller drive\u003c\/li\u003e \u003cli\u003ePowered by two AA batteries\u003c\/li\u003e \u003cli\u003eEasy assembly; no soldering required\u003c\/li\u003e \u003cli\u003eSuitable for water and flat land surfaces\u003c\/li\u003e \u003cli\u003eMaximum range of approximately 10 meters\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis propeller vehicle kit includes a motor and a propeller and uses two AA batteries as its power source. The vehicle is suitable for exploring shallow bodies of water such as lakes or streams, as well as for driving on flat land surfaces. The design is based on simple mechanics without voltage-sensitive electronic components.\u003c\/p\u003e \u003cp\u003eThe propeller is driven directly by the battery-powered motor and generates forward thrust through water pressure or ground friction. Since operation relies exclusively on batteries, no external power supply is required. The vehicle can be assembled without special tools.\u003c\/p\u003e \u003cp\u003eTypical uses include helping young people learn about mechanics and energy conversion, exploring garden ponds or streams for recreational purposes, and testing propeller designs and driving resistance in educational settings. On flat surfaces, the vehicle typically achieves a range of approximately ten meters with one set of batteries.\u003c\/p\u003e \u003cp\u003eTwo AA batteries are required for operation and must be obtained separately. The maximum range is limited by the battery capacity. Performance decreases significantly on uneven or heavily overgrown terrain.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe vehicle is intended exclusively for demonstration and testing purposes in controlled environments and not for continuous operation in official bodies of water without prior approval. Caution is required when working on the motor or electrical components to avoid injuries caused by the rotating propeller. Defective batteries or damaged switching components must not be used.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Propeller vehicle functional model with one propeller\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997864468829,"sku":"F23106365","price":3.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/propellerfahrzeug-bausatz-mit-einem-propeller-2xaa-3v-funduino-7201007.png?v=1791494807"},{"product_id":"lotubung-smd-rotierende-leds-cd4017-smd-ne555","title":"SMD soldering practice kit with rotating LEDs - CD4017, NE555","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSoldering practice material for building a rotating LED circuit with SMD components\u003c\/li\u003e \u003cli\u003eBasic ICs, a CD4017 decoder, and an NE555 oscillator for the clock signal\u003c\/li\u003e \u003cli\u003e10 surface-mount LEDs, individually switchable\u003c\/li\u003e \u003cli\u003eCircuit generates a running LED display without external programming\u003c\/li\u003e \u003cli\u003eOverall layout optimized for beginners using a soldering iron and fine tweezers\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis soldering practice kit teaches you how to work with surface-mounted components using a functional circuit. The NE555 operates as an astable oscillator and supplies regular clock pulses to the CD4017 decoder, which distributes these pulses across ten outputs and activates them sequentially. This creates a visually appealing running-light effect.\u003c\/p\u003e \u003cp\u003eThe ten LEDs are arranged as individual SMD components on the circuit board and switch on sequentially. The circuit requires a regulated DC voltage between 5 and 9 volts; actual power consumption depends on the operating voltage and the brightness of the LEDs. Once successfully assembled, the running-light pattern operates continuously without further intervention.\u003c\/p\u003e \u003cp\u003eAssembly trains you to solder tiny components precisely in a confined space and to populate a board according to a schematic. Typical applications include soldering workshops for beginners, teaching PCB technology in schools, or independently learning the basics of SMD assembly at home. The circuit works immediately after soldering, without any programming, calibration, or external configuration.\u003c\/p\u003e \u003cp\u003eAn external power source is required for operation and is not included in the set. A potentiometer can be added between the NE555 and CD4017 to adjust the clock frequency of the running-light effect. No special soldering skills are required, but you should already be familiar with using a soldering iron and solder; the board area and component density require focused work.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe operating voltage must not exceed the upper limit of 9 volts. The product is intended exclusively for soldering practice and for building prototypes, as well as for testing and development purposes. If using an unsafe power source or if you have questions about the power supply, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x SMD Soldering Practice \"Rotating LEDs\" CD4017 SMD NE555\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997867254109,"sku":"F23107657","price":2.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-smd-rotierende-leds-cd4017-smd-ne555-funduino-7138138.png?v=1791494821"},{"product_id":"chassis-motorbefestigung-motorhalter-fur-getriebemotor","title":"Gear Motor Mount - Plastic, pre-drilled","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlastic motor mount for geared motors\u003c\/li\u003e \u003cli\u003eAttaches to the gearbox output, compatible with common small gearboxes\u003c\/li\u003e \u003cli\u003ePre-drilled holes for mounting screws\u003c\/li\u003e \u003cli\u003eRobust construction for horizontal and vertical mounting\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis motor mount is designed to securely attach geared motors to robots and vehicle chassis. The plastic component positions the motor precisely and distributes loads across multiple mounting points, minimizing vibrations even during extended operation.\u003c\/p\u003e \u003cp\u003eThe mount features pre-drilled holes based on widely used gearbox standards. This allows the motor to be mounted directly without additional drilling or modification. The plastic construction reduces weight and cost without sacrificing the necessary rigidity.\u003c\/p\u003e \u003cp\u003eTypical applications include automated guided vehicles, robot chassis with wheel drives, and demonstration models in which several motors must operate side by side. The mount can be installed in both horizontal and vertical orientations.\u003c\/p\u003e \u003cp\u003eStandard mounting screws suitable for the threaded holes in the mount and a motor with a compatible gearbox output are required. The load limit depends on the motor used and the screw connection.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe motor mount is a mounting component without any independent function or electrical risk. All work on connected motors, power supplies, or control systems must be carried out by a qualified electrician or clarified with a qualified electrician before commissioning. The product is intended exclusively for prototype and test setups.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* Chassis motor mount - motor mount for geared motor\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997878002013,"sku":"F23109100","price":1.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/chassis-motorbefestigung-motorhalter-fuer-getriebemotor-funduino-8315120.png?v=1791494862"},{"product_id":"lotubung-training-der-erweiterten-smd-smt-lotfahigkeiten","title":"SMD Soldering Practice Board - Multiple difficulty levels","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSoldering practice board for surface-mount devices (SMD\/SMT)\u003c\/li\u003e \u003cli\u003eSmall solder pads and tight spacing train manual precision\u003c\/li\u003e \u003cli\u003eMultiple difficulty levels on one board\u003c\/li\u003e \u003cli\u003eNo electrical functions, purely for soldering practice\u003c\/li\u003e \u003cli\u003eReusable by desoldering the components\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis soldering practice board teaches practical skills for working with surface-mount devices (SMD). The board provides soldering points with spacing and pad sizes specifically designed to train precise and reliable soldering.\u003c\/p\u003e \u003cp\u003eThe board features copper pads and traces onto which various SMD components can be soldered. The goal is practice, not functionality. The components serve exclusively to train hand-eye coordination and soldering iron control. Different spacings and component sizes enable targeted practice, from easy to challenging.\u003c\/p\u003e \u003cp\u003eThis board helps beginners learn SMD soldering and gives experienced makers the opportunity to practice challenging soldering tasks. Repetitive practice and the ability to reuse the same board enable continuous improvement. Anyone who regularly works with SMD components can also use it to refresh their manual skills after a longer break.\u003c\/p\u003e \u003cp\u003eA soldering iron with a fine tip, solder, and flux are required, as well as a magnifying glass or soldering microscope for precise work. Targeted practice is hardly possible without these tools and consumables. Desoldering requires equipment such as a solder sucker or desoldering braid.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eWorking with soldering irons and solder requires caution due to the risk of burns and scalds. Work should be carried out in a well-ventilated area, as solder produces fumes. This board is intended exclusively for testing and training purposes.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997879378269,"sku":"F23106035","price":2.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-training-der-erweiterten-smd-smt-loetfaehigkeiten-funduino-2250590.png?v=1791493284"},{"product_id":"chassis-fur-calliope-mini-v3-calle","title":"Funduino Calle Chassis for Calliope mini V3 - Mobile Robot","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote: To use \"Calle\", a Calliope Mini 3 microcontroller is also required. It is not included and must be purchased separately.\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e \u003ch2\u003eCalle – Robot Platform for Calliope Mini V3\u003c\/h2\u003e \u003ch3\u003e\u003cspan\u003eThe perfect mobile robot for your computer science and technology classes!\u003c\/span\u003e\u003c\/h3\u003e \u003cp\u003eEnrich your computer science and technology classes with Calle, a small, compact, and affordable mobile robot for the Calliope mini V3. This innovative tool motivates students to try out their coding experiments on a mobile platform while playfully acquiring fundamental programming skills.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy use Calle in the classroom?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eEducational value: “Calle” enables teachers to explain complex concepts in computer science and robotics in an understandable and practical way. Students can program the robot, avoid obstacles, follow lines, and even integrate colorful light signals into their projects. These practical applications promote an intuitive understanding of algorithms and logic.\u003c\/p\u003e \u003cp\u003eMotivation through interactivity: Nothing is more motivating than directly applying theoretical knowledge. Calle is easy to program and can be set in motion immediately. Beginners can use pre-made program blocks without any programming knowledge. At school, two groups can compete against each other in a “driving battle” while learning in a playful way.\u003c\/p\u003e \u003cp\u003eEasy start: Calle is designed so that no soldering or complicated wiring is necessary. The Calliope mini V3 is simply plugged in, and the robot is ready to use. This reduces preparation time in class and enables a quick start to practical work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical highlights and teaching materials\u003c\/strong\u003e\u003cbr\u003e • Programming with MakeCode and Open Roberta: Enables intuitive, graphical programming specially developed for classroom use.\u003cbr\u003e • Integrated sensors: Two IR line sensors, an ultrasonic distance sensor, and six RGB LEDs offer numerous possibilities for exciting projects.\u003cbr\u003e • Plug and play: No soldering, no wiring - the Calliope mini is simply plugged into the robot and powered through it.\u003cbr\u003e • Powerful hardware: Quiet and powerful metal gear motors ensure reliable movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIncluded in delivery\u003c\/strong\u003e\u003cbr\u003e • Robot chassis board with connector for Calliope mini V3\u003cbr\u003e • 1 ultrasonic sensor\u003cbr\u003e • 2 drive wheels\u003cbr\u003e • Battery adapter for 9V batteries\u003cbr\u003e • Extensive documentation and example projects for a quick start\u003cbr\u003eNO Calliope microcontroller included!\u003c\/p\u003e \u003cp\u003eWith Calle, you can make your computer science and technology classes more exciting and practice-oriented. Foster your students’ creativity and technical understanding with this versatile and user-friendly mobile robot.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical details\u003c\/strong\u003e\u003cbr\u003eUltrasonic sensor (for Obstacle Avoidance mode “collision avoidance”)\u003cbr\u003e2 infrared line-following modules (for Line Tracking mode “line follower”)\u003cbr\u003e6 WS2812 LEDs on the top of the board (e.g. for status indication, “flashing”)\u003cbr\u003e2 LEDs pointing in the direction of travel\u003cbr\u003e12 externally usable pins (SDA, SCL, C18, C17, C16, C13, P1, P0, C4, C7, C6, C10) (C20 = SDA, C19 = SCL)\u003cbr\u003eControl using N20 motors via the Calliope’s internal motor driver\u003cbr\u003e2 drive wheels and 1 ball caster as a spacer\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e\u003cstrong\u003eDimensions and weight:\u003c\/strong\u003e\u003cbr\u003eDimensions: approx.19 (L) x 9.3 (W) x 6 (H) cm\u003cbr\u003eWeight: 135g (without controller and power source)\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997882491229,"sku":"F23110300","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/chassis-fuer-calliope-mini-v3-calle-funduino-6685969.png?v=1791494873"},{"product_id":"lotubung-kafer","title":"Beetle Soldering Kit - Soldering Practice with LEDs, Battery-Powered","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBeetle-shaped soldering practice module for developing soldering skills\u003c\/li\u003e \u003cli\u003eEquipped with LEDs and resistors\u003c\/li\u003e \u003cli\u003eSimple circuit suitable for beginners\u003c\/li\u003e \u003cli\u003eBattery-operated; no external power supply required\u003c\/li\u003e \u003cli\u003eLearning objective: understanding safe solder joints and polarity\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis soldering practice module introduces the basics of hand soldering. Its beetle shape, with clearly arranged contact points, enables focused work on the essential solder joints without distractions from complex circuits.\u003c\/p\u003e \u003cp\u003eThe module contains LEDs that light up after correct assembly and immediately provide feedback on the soldering quality. The required voltage comes from a battery that is easy to connect. Paying attention to the polarity of the LEDs is particularly important to prevent damage.\u003c\/p\u003e \u003cp\u003eThe exercise is suitable for students and beginners who are handling a soldering iron for the first time, as well as for people who want to refresh their soldering skills. The module allows repeated practice because solder joints can be desoldered and remade. The learning objective is to create clean, reliable connections and internalize the importance of correct polarity.\u003c\/p\u003e \u003cp\u003eA soldering iron with solder and a soldering tip cleaner is required for operation. The battery must be purchased separately. Before soldering for the first time, users should receive a brief introduction to handling the soldering iron to prevent injuries and damage to the module.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eSoldering irons reach temperatures above 300 degrees Celsius and can cause severe burns; set up the workspace with a heat-resistant surface and never leave the soldering iron heating unattended. The module is intended exclusively for practice and training purposes. If you have questions about safe handling, consult a knowledgeable person before starting.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Soldering Practice - Beetle\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997882589533,"sku":"F23107566","price":5.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-kaefer-funduino-7933475.png?v=1791494318"},{"product_id":"solarauto-spielzeug-kleinstes-solarauto-der-welt","title":"Solar Car Mini - Toy Car without Battery, Sunlight Only","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMiniature solar-powered toy car\u003c\/li\u003e \u003cli\u003eUses sunlight as its only energy source\u003c\/li\u003e \u003cli\u003eNo batteries or external power supply required\u003c\/li\u003e \u003cli\u003eSuitable for demonstrations of solar energy\u003c\/li\u003e \u003cli\u003eVery small dimensions allow transport and storage without requiring additional space\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis solar car is a miniature vehicle powered exclusively by photovoltaic cells. A small solar cell on the roof supplies power to a low-power motor that drives the wheels. Its compact design makes the car easy to take with you and use anywhere sufficient sunlight is available.\u003c\/p\u003e \u003cp\u003eSince the car only needs sunlight, battery changes and charging are completely unnecessary. It works immediately when placed in bright light and stops by itself when the vehicle is covered by shade. This immediate operation makes it particularly suitable for children's hands, as operating errors are impossible.\u003c\/p\u003e \u003cp\u003eIn lessons, the toy car serves as an illustrative model for how solar panels and energy conversion work. It moves along windowsills or outdoors without any additional aids. Its miniature proportions also allow it to be used in smaller display cases or exhibition spaces.\u003c\/p\u003e \u003cp\u003eFor the car to keep moving, the solar cell must be reached directly by sunlight or a comparably bright light source. Stray light and fluorescent tubes are not sufficient. The vehicle remains stationary in the shade or in dark rooms, which is not a defect but the intended operating principle.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe toy car contains no chemical or electrical hazardous substances and is suitable for use without safety concerns. Small parts may pose a choking hazard; please observe the manufacturer's age recommendations. If the solar module is damaged, the vehicle should no longer be used.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Solar car toy \"Smallest solar car in the world\"\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997919420765,"sku":"F23107376","price":3.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/solarauto-spielzeug-kleinstes-solarauto-der-welt-funduino-8915900.jpg?v=1791493336"},{"product_id":"rad-reifen-fur-tt-getriebemotor-rc-wheel-chassis","title":"Wheel for TT gear motor - Ø 65 mm, 26 mm wide, 4 pieces","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eReplacement tires for geared motors in RC modeling\u003c\/li\u003e \u003cli\u003eFits common TT motor axles\u003c\/li\u003e \u003cli\u003eDiameter 65 mm, width 26 mm\u003c\/li\u003e \u003cli\u003eTreaded rubber surface\u003c\/li\u003e \u003cli\u003eFour pieces per pack\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eReplacement tires for RC vehicles with geared motors fit standardized TT axles and enable the quick replacement of worn or damaged treads. The treaded rubber compound provides traction on various types of surfaces.\u003c\/p\u003e \u003cp\u003eThese wheels are used in mobile robots, RC vehicle projects, and experimental chassis. A set of four tires is typically sufficient for a two-axle vehicle or for replacing the tires on an existing model.\u003c\/p\u003e \u003cp\u003eOperation requires only a compatible geared motor with a TT gearbox head. When the tread is worn or damaged, the wheels can be replaced without tools or with simple tools.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eModifications or the installation of sharp-edged components may cause injuries. Small parts may be swallowed. Suitable for modeling, testing, and prototype development.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x wheel tire for TT geared motor, RC wheel, chassis\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997937803613,"sku":"F23105899","price":1.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/rad-reifen-fuer-tt-getriebemotor-rc-wheel-chassis-funduino-3092765.png?v=1791496240"},{"product_id":"felge-rad-reifen-fur-n20-motoren-tt-getriebemotoren-kompatibel-mit-lego","title":"Wheel for N20 gear motor - 4 pieces, Ø 65 mm, 3 mm bore","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWheels with rims and tires for N20 gear motors\u003c\/li\u003e \u003cli\u003eDiameter 65 mm, width 26 mm\u003c\/li\u003e \u003cli\u003e3 mm bore for N20 motor shafts\u003c\/li\u003e \u003cli\u003ePlastic rim with rubber tire\u003c\/li\u003e \u003cli\u003eSet of 4 pieces per pack\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThese wheels fit directly onto N20 gear motors and serve as drive wheels for mobile robots or vehicle-like projects. The plastic rims with vulcanized rubber tires provide sufficient traction on level surfaces.\u003c\/p\u003e \u003cp\u003eThe 3 mm bore fits the standardized motor shaft of the N20 motor. With a diameter of 65 mm, these wheels can reach speeds of up to approximately 0.5 m\/s with the usual N20 gear stages. The rubber tread enables power transmission through friction rather than slippery plastic.\u003c\/p\u003e \u003cp\u003eTypical applications include two-wheeled or four-wheeled robotic vehicles, such as obstacle detectors on a level tabletop or small transport carts in laboratories. The wheels work on laminate, wood, and concrete floors; traction decreases considerably on steeply inclined surfaces.\u003c\/p\u003e \u003cp\u003eEach pack contains four wheels. The motor shaft must be exposed or accessible via a short spindle; there is no locking groove or pin for transmitting torque, so the wheels are only suitable for applications where frictional grip is sufficient. Separate wheels are required for other drive concepts or different motor types.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eRemove sharp-edged or loose parts before use. These wheels are intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cp\u003e1x rim \/ wheel \/ tire for N20 motors, TT gear motors, compatible with Lego\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997938622813,"sku":"F23107387","price":1.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/felge-rad-reifen-fuer-n20-motoren-tt-getriebemotoren-kompatibel-mit-lego-funduino-5092718.png?v=1791495009"},{"product_id":"lotubung-flugzeug-bausatz","title":"Soldering practice airplane - kit with LED lighting, 80 x 120 mm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSoldering practice kit in the shape of an airplane for learning basic soldering techniques\u003c\/li\u003e \u003cli\u003eAssembly with standard electronic components (resistors, capacitors, LEDs)\u003c\/li\u003e \u003cli\u003eCopper-clad circuit board, dimensions approximately 80 * 120 mm\u003c\/li\u003e \u003cli\u003eSoldering points arranged with progressively increasing difficulty\u003c\/li\u003e \u003cli\u003eOnce fully assembled, a working airplane model with LED lighting\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis soldering practice kit teaches the basics of soldering using an airplane model. Students and beginners practice on realistic soldering points, from simple through-hole components to more complex connections, without ruining a project that would end up as scrap anyway. The difficulty increases gradually.\u003c\/p\u003e \u003cp\u003eSoldering is carried out with a conventional soldering iron and either leaded or lead-free solder, as preferred. The circuit board is robust enough to withstand failed attempts without the traces tearing. If you need to reheat a joint several times or work with slightly too much heat, you can do so here without consequences.\u003c\/p\u003e \u003cp\u003eOnce fully assembled, the kit uses illuminated LEDs to indicate that it is working, immediately confirming that the soldering has been successful. This is more motivating than a silent resistor. Typical applications include electronics lessons at schools, open workshops, beginner courses at makerspaces, or private learning at one's own pace. Parents can also practice using a soldering iron together with their children on a concrete project.\u003c\/p\u003e \u003cp\u003eRequired are a soldering iron (25 to 40 watts is sufficient), solder, a tip cleaner, and basic workspace lighting. A power supply for the soldering iron must be purchased separately if one is not already available. No prior electronics knowledge is required.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe soldering iron reaches temperatures above 300 °C and causes severe burns. When using a damp sponge or tip cleaner, work only without touching it, and safely place the iron on its stand after each use. This kit is intended exclusively for building prototypes and for testing and learning purposes, and is not suitable for installation in the household electrical system.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Soldering Practice - Airplane Kit\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997942260061,"sku":"F23110372","price":5.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-flugzeug-bausatz-funduino-4728348.png?v=1791495009"},{"product_id":"zwei-ebenen-chassis-mit-2-motoren-smart-car","title":"Smart Car robot chassis - 2 levels, 2 DC motors, 4 AA holder","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTwo-wheeled chassis with two DC motors for robotic movement\u003c\/li\u003e \u003cli\u003eTwo-level design for integrating additional sensors and controllers\u003c\/li\u003e \u003cli\u003eMotor outputs connected via plug contacts, enabling external control\u003c\/li\u003e \u003cli\u003eRubber-tired wheels and sliding contacts for power transmission\u003c\/li\u003e \u003cli\u003eIntegrated battery compartment for 4 AA cells\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eA two-wheeled chassis with two independently controllable DC motors forms the basis for basic autonomous vehicle projects. The two-level design provides space for sensors and controller boards above the drive level without obstructing the motors. The plug contacts at the motor outputs enable wiring to an external motor control module, such as an H-bridge driver or a microcontroller with power outputs.\u003c\/p\u003e \u003cp\u003eEach motor is mounted on a drive axle with sliding contacts for power supply. The wheels are equipped with rubber tires and handle uneven surfaces significantly better than rigid plastic wheels. Because the two motors operate independently, the chassis can turn and drive straight at different speeds, depending on the control signals. A sliding track or skid at the rear stabilizes the direction of travel.\u003c\/p\u003e \u003cp\u003eThe integrated battery compartment holds four AA cells and supplies 4.8 to 6 volts, depending on the cell type. This voltage is fed directly to the motor outputs. Typical applications include autonomous obstacle-avoidance vehicles with distance sensors, light-seeking vehicles with LDR sensors, or simple remote control via a control module. The design also allows experiments with line following, provided the appropriate sensors are mounted on the upper level.\u003c\/p\u003e \u003cp\u003eAn external control module is required to control the motors, such as an H-bridge or a controller with PWM outputs. The maximum battery voltage is approximately 6 volts with four fresh alkaline cells. Additional components mounted on the upper level should not be too heavy so that the motors retain sufficient traction.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eWork on electrical connections should be carried out by a qualified electrician if there is any uncertainty. The chassis is intended exclusively for prototypes and development projects, not for use in household electrical systems. Observe battery polarity and avoid overloading the motor outputs.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* Two-Level Chassis with 2 Motors - Smart Car (Kit)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997943079261,"sku":"F23107487","price":13.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/zwei-ebenen-chassis-mit-2-motoren-smart-car-funduino-7155281.png?v=1791495970"},{"product_id":"lotubung-kreisel-mit-rotierenden-leds","title":"Soldering practice gyroscope - 4 rotating LEDs, battery-powered","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSoldering exercise in the shape of a spinning top with rotating LEDs for visually checking the soldering result\u003c\/li\u003e \u003cli\u003eFour LEDs mounted on the circuit board\u003c\/li\u003e \u003cli\u003eBattery-powered with switch\u003c\/li\u003e \u003cli\u003eAll components must be assembled and soldered\u003c\/li\u003e \u003cli\u003eRotation is created by asymmetrical weight distribution\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis soldering exercise combines learning soldering techniques with a functional project. The spinning top is assembled and soldered by the user, with all components mounted by hand. The four LEDs light up during operation and, due to their arrangement, create a visual effect when the top spins, making successful soldering immediately visible.\u003c\/p\u003e \u003cp\u003eThe spinning top uses battery power to supply the LEDs and has an integrated switch. The asymmetrical weight distribution of the assembled circuit board causes it to rotate when the spinning top is set in motion with a flick. Proper operation depends on all solder joints being made correctly; faulty connections prevent the LEDs from lighting up and therefore prevent visual confirmation of success.\u003c\/p\u003e \u003cp\u003eThe exercise is suitable for beginners who want to gain their first soldering experience and hold a finished result in their hands right away. The spinning top also provides immediate feedback on soldering quality for school projects and workshops. Its simple mechanism requires only a few components and tolerates minor variations.\u003c\/p\u003e \u003cp\u003eA soldering station and solder are required; the battery is included or must be obtained separately if it is not included. A fine-tipped soldering iron and prior soldering experience are not necessary, as the spacing and components are designed for beginners.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eSoldering produces fumes and heat; ensure adequate ventilation. The soldering iron can cause burns; ensure that all solder joints have fully hardened before operation. This product is intended exclusively for educational purposes and testing and development work and is not intended for connection to the household electrical supply. If you have questions about proper soldering techniques, consult a qualified electrician or experienced supervisor before completing the project.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Soldering exercise: spinning top with rotating LEDs\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997943341405,"sku":"F23107990","price":2.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-kreisel-mit-rotierenden-leds-funduino-1395816.jpg?v=1791495950"},{"product_id":"lotubung-lauflicht-fur-smd-und-tht-technik-mit-ne555-und-cd4017","title":"Soldering practice running light - SMD and THT (41","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSoldering practice with sequentially illuminated running lights for SMD and THT components\u003c\/li\u003e \u003cli\u003eIntroduction to soldering techniques and circuit understanding\u003c\/li\u003e \u003cli\u003eExperience multiple LEDs connected in series or in parallel\u003c\/li\u003e \u003cli\u003eThrough-hole connections and SMD pads on one circuit board\u003c\/li\u003e \u003cli\u003ePower supply via USB or 5 V connection\u003c\/li\u003e \u003cli\u003eComponents are pre-prepared, and the tinned circuit board requires no prior experience\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA running-light soldering exercise combines learning soldering techniques with the functionality of a simple electronic device. The circuit board demonstrates how multiple LEDs light up and go out one after another, while beginners practice both soldering techniques: soldering components onto surface-mounted SMD pads and conventionally inserting THT components (through-hole components). Which method is more suitable depends on the soldering conditions and the available equipment. Both are easy to solder because components such as LEDs and resistors are marked, and the circuit board has clear labeling.\u003c\/p\u003e \u003cp\u003eThe running light is created by a circuit that powers individual LEDs via discrete components or controls them with a simple microcontroller, depending on the version. With each visible lighting sequence, the electrical function becomes immediately tangible: voltage flows, an LED lights up, and the LED goes out. No calibration is necessary; everything works after soldering. The assembly also helps explain why components must be installed in a specific order and with the correct polarity.\u003c\/p\u003e \u003cp\u003eIn practice, this exercise can be completed at school, in a workshop, or at home as a first self-soldered project. Beginners learn how hot a soldering iron gets, what rosin smells like during soldering, how much pressure components can withstand, and how molten tin solidifies as it cools. The running light can then be used as desk decoration or installed in project boxes. Its load capacity and operating time are unlimited once the power supply is stable.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe soldering iron reaches temperatures above 350 degrees Celsius and poses a burn hazard. The product is intended exclusively for assembling prototypes and for testing and development purposes. It is not connected to household power grids and does not require professional supervision when powered via USB, but competent guidance during soldering is important.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Soldering exercise - flowing light chain\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997947404637,"sku":"F23108226","price":1.84,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-lauflicht-fuer-smd-und-tht-technik-mit-ne555-und-cd4017-funduino-9118474.png?v=1791495025"},{"product_id":"lotubung-weihnachtsbaum","title":"Christmas tree soldering kit - soldering practice with 15 components and LED","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSoldering practice kit with Christmas tree design made from 15 components\u003c\/li\u003e \u003cli\u003eManual assembly and soldering, suitable for beginners\u003c\/li\u003e \u003cli\u003eLED effect after assembly, powered by a battery compartment with switch\u003c\/li\u003e \u003cli\u003eLearning objective: safe soldering techniques and printed circuit board assembly\u003c\/li\u003e \u003cli\u003eFinished project functions as a decorative light\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis soldering kit teaches the basics of soldering through a hands-on project. The Christmas tree consists of 15 components in total, which are assembled and soldered entirely by hand. The preassembled printed circuit board guides you safely to success with a simple layout and clearly labeled component positions.\u003c\/p\u003e \u003cp\u003eSoldering itself is the learning objective, involving the attachment of wire jumpers, individual resistors, and LEDs to the circuit board. The simple circuit contains no special components that would be difficult to handle. After all soldering has been completed and all connections have been checked, the battery spring is installed.\u003c\/p\u003e \u003cp\u003eTypical applications range from a first practical project in electronics classes to a private introductory soldering course. The tree can then be used as a lasting, functional illuminated decorative object, for example on a desk or as part of Christmas decorations. The visible achievement of the illuminated tree is especially motivating for young beginners.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eSoldering irons and solder can cause serious burns. Soldering fumes must be removed with adequate ventilation. This assembly is intended exclusively for testing and development purposes and for learning soldering techniques; it is not intended for installation in the household power circuit.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998014579037,"sku":"F23108748","price":5.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-weihnachtsbaum-funduino-9044295.png?v=1791496121"},{"product_id":"seifenblasenmaschine-diy-bausatz","title":"Bubble Machine Kit - DIY model with electric motor, 2 AA","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eKit for a battery-powered bubble machine\u003c\/li\u003e \u003cli\u003eElectric motor drives the propeller and bubble wheel\u003c\/li\u003e \u003cli\u003eBubble wheel is dipped into soapy water and creates films\u003c\/li\u003e \u003cli\u003eAirflow detaches bubbles from the rings\u003c\/li\u003e \u003cli\u003eTransparent plastic tub, base plate as the supporting frame\u003c\/li\u003e \u003cli\u003eOn\/off switch for power supplied by the battery holder\u003c\/li\u003e \u003cli\u003eTwo AA batteries required, not included\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe kit contains individual wooden, plastic, and metal parts for assembling a bubble machine. Once assembled, the model measures approximately 13.5 by 9 by 7.5 centimeters and requires two AA batteries for operation, which must be purchased separately.\u003c\/p\u003e \u003cp\u003eThe centerpiece is an electric motor whose shaft drives both a propeller and a wheel with ring-shaped openings. As it rotates, the wheel dips into a tub of soapy water. As it emerges, a thin soap film forms in the rings, and the airflow generated by the propeller detaches it from the rings as bubbles.\u003c\/p\u003e \u003cp\u003eDesigned for children aged 5 and over, assembly requires adult supervision. Small and partially sharp parts pose a choking hazard, so children should be supervised during assembly and instructed afterward not to put the small parts in their mouths.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe kit is not intended for integration into household electrical installations and is intended solely for educational purposes and supervised play. This product contains small parts and some sharp edges that may cause injuries; assembly and use require adult supervision. If you have questions about safe operation, consult a qualified electrician before use.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x DIY bubble machine kit\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998023983453,"sku":"F23107381","price":3.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/seifenblasenmaschine-diy-bausatz-funduino-9372467.jpg?v=1791495185"},{"product_id":"lotubung-led-sanduhr","title":"Soldering Practice LED Hourglass - kit with assembled circuit board, 2x AA","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSoldering practice for building an LED hourglass\u003c\/li\u003e \u003cli\u003ePractice soldering light-emitting diodes and resistors\u003c\/li\u003e \u003cli\u003ePre-assembled circuit board with through-hole components\u003c\/li\u003e \u003cli\u003eBattery-powered with 2 AA batteries\u003c\/li\u003e \u003cli\u003eCompleted hourglass visually shows elapsed time, not the current time of day\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis soldering practice kit teaches the basics of soldering while building a functional LED hourglass. Beginners practice with through-hole components that require safe handling without putting expensive components at risk. The circuit board is already populated; only soldering and assembly are required.\u003c\/p\u003e \u003cp\u003eThe hourglass uses a row of LEDs that light up one after another to represent the passage of a set period of time. After soldering the connections, a battery holder for two AA batteries is installed, and the circuit then works without any other power supply. Assembly takes approximately one to two hours.\u003c\/p\u003e \u003cp\u003eWith the completed hourglass, practical applications include a kitchen egg timer, a study timer for schoolwork, or a game timer for board games. As a decoration with a lighting effect, the hourglass also fits well in a room or hobby area.\u003c\/p\u003e \u003cp\u003eA soldering iron, solder, and solder wick are required for soldering. The exercise cannot be completed without these tools. The hourglass only visually shows the passage of time and does not replace a clock that displays the current time of day.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eSoldering produces fumes, so good ventilation is required. This product is intended exclusively for building prototypes and for testing and development purposes in private or educational settings. It is not intended for installation in the household electrical circuit.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Soldering Practice Kit - LED Hourglass\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998090142045,"sku":"F23110007","price":7.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-led-sanduhr-funduino-9103238.png?v=1791495217"},{"product_id":"lotubung-leuchtendes-herz","title":"Soldering Practice Heart - 5 red LEDs, battery-powered","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eHeart-shaped soldering practice kit with LED assembly\u003c\/li\u003e \u003cli\u003eFive red LEDs to solder yourself\u003c\/li\u003e \u003cli\u003eBattery-powered with an on\/off switch\u003c\/li\u003e \u003cli\u003eAssembly with simple components, suitable for beginners\u003c\/li\u003e \u003cli\u003eLearning effect through visual LED feedback\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis soldering practice kit teaches basic hand-soldering skills through a simple, attractively designed project. The heart-shaped layout is especially motivating for beginners who want to gain initial confidence working with a soldering iron and solder. The five red LEDs are soldered individually onto the prepared circuit board and light up when a switch is pressed.\u003c\/p\u003e \u003cp\u003eThe operating principle is basic: a battery supplies power to the LEDs when the switch is closed. Each completed pair of soldered contacts can be tested immediately because the LED lights up or does not. This immediate feedback helps identify and correct errors before all components have been installed. No calibration is required.\u003c\/p\u003e \u003cp\u003eThe soldering practice kit is suitable for learning basic connection techniques on powered components, practicing clean solder joints under realistic conditions, and quickly determining which soldering equipment is actually needed at home or in the workshop. Anyone who wants to design and assemble their own circuit boards afterward will have developed the necessary motor skills through this exercise.\u003c\/p\u003e \u003cp\u003eYou will need a soldering iron (approximately 30 to 40 watts), solder, and a heat-resistant surface or soldering stand. A battery is required; its type and voltage are specified in the kit components. The exercise is limited to a few components, so it is suitable only as an introductory project and not for advanced users. Experienced solderers will find no new learning material here.\u003c\/p\u003e \u003ch3\u003eSafety Instructions\u003c\/h3\u003e \u003cp\u003eSoldering produces heat and fumes; ensure adequate ventilation and place the soldering iron only on a heat-resistant surface. This product is intended exclusively for educational purposes and for practicing basic techniques. It is not intended for installation in the household electrical circuit.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998093582685,"sku":"F23108482","price":2.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-leuchtendes-herz-funduino-6622802.png?v=1791496362"},{"product_id":"chassis-fur-arduino-roboter-fahrgestell-mit-zwei-achsen","title":"Robot chassis - 2 axles, 110 x 85 mm, for Arduino","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eChassis for Arduino-based robots with two motorized wheels\u003c\/li\u003e \u003cli\u003eWidth 85 mm, length 110 mm, height approximately 25 mm (without wheels)\u003c\/li\u003e \u003cli\u003eMount for two geared DC motors, approximately 80 rpm at 6 V\u003c\/li\u003e \u003cli\u003eSlot for Arduino Uno or compatible boards\u003c\/li\u003e \u003cli\u003eABS plastic construction with screw-mounted assembly\u003c\/li\u003e \u003cli\u003eWheels and motors available separately or optionally pre-installed\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis robot chassis provides a robust foundation for mobile projects with Arduino boards. The plastic platform directly accommodates an Arduino Uno or compatible controllers and mechanically connects them to two geared DC motors. This enables autonomous systems with independent movement.\u003c\/p\u003e \u003cp\u003eThe motors rotate at approximately 80 revolutions per minute at an operating voltage of 6 volts. A separate motor controller using relays, transistors, or a motor driver module is required to control the wheels from the Arduino. The power supply is provided by a separate battery or an external power supply; the Arduino board can be connected in parallel.\u003c\/p\u003e \u003cp\u003eCommon applications include obstacle detection using attached ultrasonic sensors, line following with IR sensors on the underside, or controlling motor speed with PWM signals from the Arduino. It is also suitable as a platform for small mechanical manipulators or camera systems.\u003c\/p\u003e \u003cp\u003eThe chassis is made of ABS plastic and requires no calibration. Wheels are not included. Depending on the project, an additional motor driver for control, navigation sensors, a power supply with at least 6 volts, and possibly structures for mounting additional components may be required.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis product is intended exclusively for building prototypes and for testing and development purposes. Assembly is carried out using screw connections; care is required when installing electric motors and the power supply to avoid short circuits.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cp\u003eincluded. Depending on the project, an additional motor driver for control, navigation sensors, a power supply with at least 6 volts, and possibly structures for mounting additional components may be required.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998146208093,"sku":"F23107455","price":10.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/chassis-fuer-arduino-roboter-fahrgestell-mit-zwei-achsen-funduino-3492742.png?v=1791495280"},{"product_id":"lotubung-orgel-mit-ne555-chip-8-tastern-und-lautsprecher","title":"Soldering practice organ - NE555, 8 buttons, speaker","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSoldering exercise: functional organ with an NE555 oscillator and eight keys\u003c\/li\u003e \u003cli\u003eEight different tone frequencies through different RC timing circuits\u003c\/li\u003e \u003cli\u003eIntegrated speaker\u003c\/li\u003e \u003cli\u003eComponent placement markings on the circuit board\u003c\/li\u003e \u003cli\u003eReady-made circuit board, including all components for assembly\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis soldering exercise involves assembling a functional organ while practicing essential soldering skills. At its core is an NE555 timer, which generates different frequencies depending on the connected RC circuit. Eight keys select different resistor and capacitor combinations to play eight different tones.\u003c\/p\u003e \u003cp\u003eThe operating principle uses the NE555's ability to oscillate as an astable multivibrator. Each key press connects a different resistor-capacitor combination, immediately changing the oscillation frequency. After soldering, the circuit board is installed in a simple plastic housing; the small speaker is already assembled.\u003c\/p\u003e \u003cp\u003eApplications: Beginners receive immediate feedback while soldering, as each completed key produces a tone and thereby confirms that the corresponding circuit section is working. In educational settings, the organ is used to teach oscillator concepts and frequency modulation through RC circuits. Simple melodies can be played as soon as several keys have been soldered.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eSoldering produces fumes; ensure adequate ventilation. This learning module is intended exclusively for assembling prototypes and for testing and development purposes, and is not suitable for installation in household electrical circuits.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Soldering Exercise - Organ\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998172750173,"sku":"F23106356","price":3.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-orgel-mit-ne555-chip-8-tastern-und-lautsprecher-funduino-5090407.png?v=1791495316"},{"product_id":"antriebsrad-fur-getriebemotor","title":"Drive wheel for geared motor - gear Ø 24 mm, module 0,5, 4 mm bore","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDrive gear for geared motors\u003c\/li\u003e \u003cli\u003eGear diameter: 24 mm\u003c\/li\u003e \u003cli\u003e4 mm bore for motor shaft\u003c\/li\u003e \u003cli\u003eModule 0.5 with 48 teeth\u003c\/li\u003e \u003cli\u003ePlastic material\u003c\/li\u003e \u003cli\u003eMounting with a key or clamping ring\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe drive gear is a gear for transmitting power to geared motors. It connects the motor shaft to driven components and transfers torque. With a diameter of 24 mm and 48 teeth at module 0.5, the gear fits motor shafts with a diameter of 4 mm. Its plastic construction enables lightweight designs without adding extra weight.\u003c\/p\u003e \u003cp\u003eModule 0.5 is a standardized gear measurement that determines compatibility with other gears of the same module. Anyone transmitting higher torque needs gears with a higher module. The gear is mounted using a key or a clamping ring, depending on the requirements for secure fastening and removability.\u003c\/p\u003e \u003cp\u003eApplications include lightweight drives in robots, model making, and laboratory setups. A typical scenario is transferring a motor shaft to a larger-diameter gear in order to reduce speed and increase torque. For permanent or heavily loaded gearboxes, metal is the better choice.\u003c\/p\u003e \u003cp\u003eThe gear fits only motor shafts with exactly 4 mm diameter. Gears with a different module will not mesh. When selecting the mounting system, it should be clear whether the gear will need to be removed later or may remain permanently installed.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe drive gear is intended exclusively for building prototypes and for testing and development purposes. During operation, there is a risk of crushing and injury if rotating parts are touched; a cover or protective guard must be installed. Do not perform any work on or immediately next to the running drive.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Drive gear for geared motor (motor not included)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998292091229,"sku":"F23109112","price":1.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/antriebsrad-fuer-getriebemotor-funduino-7968122.png?v=1791495470"},{"product_id":"funduino-cube-lotubung-inkl-anleitung","title":"Funduino Cube soldering practice board - learning board for Arduino, with instructions","description":"\u003ch2\u003e\n\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003eThe Funduino Cube as a soldering exercise\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eLearn programming and soldering with ease\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/h2\u003e \u003cp\u003e\u003cspan\u003eThe Funduino Cube is a comprehensive learning board for Arduino programming, specially developed for beginners and presented in this version as a soldering exercise. Important microelectronics components, such as LEDs and a temperature sensor, are permanently integrated into the board after soldering. Once assembled, the Funduino Cube is ready to use and can be programmed directly by connecting it via USB cable. With our instructions, we guide users from assembling the electrical components to programming, enabling the best possible learning experience. It is primarily designed for educational use and promotes technical understanding through practical projects. The Funduino Cube is recommended for students from fifth grade onward and offers many possibilities for designing varied lessons. \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBrief overview: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003cspan class=\"OYPEnA font-feature-liga-off font-feature-clig-off font-feature-calt-off text-decoration-none text-strikethrough-none\"\u003eDevelopment board for Arduino as a soldering exercise\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan class=\"OYPEnA font-feature-liga-off font-feature-clig-off font-feature-calt-off text-decoration-none text-strikethrough-none\"\u003eIncludes online companion booklet \/ workbook (180+ pages, 13 lessons)\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan class=\"OYPEnA font-feature-liga-off font-feature-clig-off font-feature-calt-off text-decoration-none text-strikethrough-none\"\u003eDeveloped for beginners, programming novices, and anyone interested in soldering \u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan class=\"OYPEnA font-feature-liga-off font-feature-clig-off font-feature-calt-off text-decoration-none text-strikethrough-none\"\u003eDivided into 13 consecutive lessons\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan class=\"OYPEnA font-feature-liga-off font-feature-clig-off font-feature-calt-off text-decoration-none text-strikethrough-none\"\u003eCan be programmed using blocks and text after assembly\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\n\u003cspan class=\"OYPEnA font-feature-liga-off font-feature-clig-off font-feature-calt-off text-decoration-none text-strikethrough-none\"\u003eWith additional interfaces (I2C, Serial, Analog), Grove \/ XH2.54 \/ 2.54 pin headers\u003c\/span\u003e\u003cspan class=\"OYPEnA font-feature-liga-off font-feature-clig-off font-feature-calt-off text-decoration-none text-strikethrough-none\"\u003e \u003c\/span\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv class=\"flex-shrink-0 flex flex-col relative items-end\"\u003e \u003ch2\u003e\u003cspan class=\"OYPEnA font-feature-liga-off font-feature-clig-off font-feature-calt-off text-decoration-none text-strikethrough-none\"\u003eIs all of this too much effort for you, and would you rather get started programming right away?\u003c\/span\u003e\u003c\/h2\u003e \u003cp\u003e\u003cspan class=\"OYPEnA font-feature-liga-off font-feature-clig-off font-feature-calt-off text-decoration-none text-strikethrough-none\"\u003e→ Then you will find the already completed and ready-to-use Funduino Cube \u003ca class=\"Hyperlink SCXW178881535 BCX0\" href=\"https:\/\/funduinoshop.com\/funduino-education\/funduino\/funduino-cube\/funduino-cube-arduino-kompatibles-entwicklerboard-inkl.-arbeitsbuch\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan class=\"TextRun Underlined SCXW178881535 BCX0\" lang=\"DE-DE\" xml:lang=\"DE-DE\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW178881535 BCX0\" data-ccp-charstyle=\"Hyperlink\"\u003eHERE\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e!  \u003c\/span\u003e\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"group\/conversation-turn relative flex w-full min-w-0 flex-col agent-turn\"\u003e \u003cdiv class=\"flex-col gap-1 md:gap-3\"\u003e \u003cdiv class=\"flex max-w-full flex-col flex-grow\"\u003e \u003cdiv class=\"min-h-8 text-message flex w-full flex-col items-end gap-2 whitespace-normal break-words [.text-message+\u0026amp;]:mt-5\" dir=\"auto\" data-message-author-role=\"assistant\" data-message-id=\"33b4ec13-0862-4ea3-ac85-113a99faeab5\" data-message-model-slug=\"gpt-4o\"\u003e \u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden first:pt-[3px]\"\u003e \u003cdiv class=\"markdown prose w-full break-words dark:prose-invert dark\"\u003e \u003ch2\u003e\n\u003cstrong\u003eAfter assembly: Learn programming in 13 lessons\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eOver 180 pages of compact, structured knowledge\u003c\/em\u003e\n\u003c\/h2\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cp\u003eWith the included workbook, you will learn step by step how to program the Funduino Cube. In over 180 pages, you will find comprehensive information about the software, as well as all the necessary background details to successfully complete the 13 lessons.\u003c\/p\u003e \u003cp\u003eThe lessons are divided into easy-to-follow steps. With each completed step, you get a little closer to the solution. We explain not only which tasks you need to complete, but also why they are important - this makes every step easy to understand and ensures that the knowledge stays with you long-term.\u003c\/p\u003e \u003cp\u003eTo help you keep track at all times, the steps are also supported by clear illustrations. New content is highlighted in color so that you can immediately recognize what matters.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cdiv class=\"content--title\"\u003eFeatures\u003c\/div\u003e \u003cdiv class=\"product--properties panel has--border\"\u003e \u003ctable class=\"product--properties-table\"\u003e \u003ctbody\u003e \u003ctr class=\"product--properties-row\"\u003e \u003ctd class=\"product--properties-label is--bold\"\u003eMicrocontroller:\u003c\/td\u003e \u003ctd class=\"product--properties-value\"\u003eNano R3\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"product--properties-row\"\u003e \u003ctd class=\"product--properties-label is--bold\"\u003eNumber of external ports:\u003c\/td\u003e \u003ctd class=\"product--properties-value\"\u003e3\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"product--properties-row\"\u003e \u003ctd class=\"product--properties-label is--bold\"\u003eNumber of modules:\u003c\/td\u003e \u003ctd class=\"product--properties-value\"\u003e13\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"product--properties-row\"\u003e \u003ctd class=\"product--properties-label is--bold\"\u003eNumber of lessons:\u003c\/td\u003e \u003ctd class=\"product--properties-value\"\u003e13\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"product--properties-row\"\u003e \u003ctd class=\"product--properties-label is--bold\"\u003eConfiguration:\u003c\/td\u003e \u003ctd class=\"product--properties-value\"\u003eAssembled\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"product--properties-row\"\u003e \u003ctd class=\"product--properties-label is--bold\"\u003eGrade level:\u003c\/td\u003e \u003ctd class=\"product--properties-value\"\u003efrom 5th grade\u003c\/td\u003e \u003c\/tr\u003e \u003ctr class=\"product--properties-row\"\u003e \u003ctd class=\"product--properties-label is--bold\"\u003eProgramming:\u003c\/td\u003e \u003ctd class=\"product--properties-value\"\u003eOpen Roberta, Arduino IDE\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003e\u003cspan class=\"OYPEnA font-feature-liga-off font-feature-clig-off font-feature-calt-off text-decoration-none text-strikethrough-none\"\u003eScope of delivery:\u003c\/span\u003e\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCube electronics\u003c\/li\u003e \u003cli\u003eFunduino Cube base board\u003c\/li\u003e \u003cli\u003eonline workbook (with 13 lessons and over 180 pages of content)\u003c\/li\u003e \u003cli\u003eFunduino NANO R3 - with original FTDI chipset\u003c\/li\u003e \u003cli\u003eMini USB cable 100cm\u003c\/li\u003e \u003cli\u003eFunduino SG90 servo motor \u003c\/li\u003e \u003cli\u003eFunduino infrared remote control\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998300545373,"sku":"F23110296","price":29.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/funduino-cube-loetuebung-inkl-anleitung-funduino-9062138.jpg?v=1791495487"},{"product_id":"lotubung-glucksrad","title":"Soldering practice kit Lucky Wheel - 10 LEDs, NE555, 9-12 V","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSoldering practice board with 10 LEDs, a button and integrated circuits for self-assembly\u003c\/li\u003e \u003cli\u003eSimulates a wheel of fortune: one LED lights up after another, slows down and stops randomly\u003c\/li\u003e \u003cli\u003eNE555 timer generates clock pulses, CD4017BE counter controls the LEDs in sequence\u003c\/li\u003e \u003cli\u003eAll components are through-hole and must be soldered by hand\u003c\/li\u003e \u003cli\u003eProvides hands-on practice with timer and counter circuits while soldering\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis soldering practice kit consists of a circuit board with component markings and all the components needed for manual assembly: ten red LEDs, a button, two integrated circuits, a capacitor and several resistors. Soldering all the through-hole components safely and repeatedly trains basic soldering skills.\u003c\/p\u003e \u003cp\u003eThe NE555 acts as a timer and generates regular clock pulses when the button is pressed. The CD4017BE counter passes these pulses on to the ten LEDs arranged in a ring around the board. Exactly one LED lights up in each cycle, and the next one is activated when the button is released or pressed again.\u003c\/p\u003e \u003cp\u003eAfter the button is released, the capacitor automatically slows down the circuit until the LEDs finally stop at a randomly selected LED. The effect resembles a classic wheel of fortune with mechanical rollers and is suitable for learning how digital counters and timers work during practical soldering.\u003c\/p\u003e \u003cp\u003eThe kit requires only a soldering station and solder. After complete assembly and inspection of the solder joints, operation requires two 1.5-volt batteries for a total operating voltage of 3 volts.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eSoldering should be carried out in a well-ventilated area, as soldering fumes may be produced. The fully assembled module is intended exclusively for prototyping, testing and development purposes and is not designed for installation in household electrical circuits. If you have questions about the power supply or operation, consult a qualified electrician before commissioning.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998308901213,"sku":"F23108519","price":2.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-gluecksrad-funduino-3124441.png?v=1791496452"},{"product_id":"lotubung-bausatz-digitaluhr","title":"Soldering kit Digital clock - learning project for beginners","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eElectronic learning project for building a simple digital clock\u003c\/li\u003e \u003cli\u003eTeaches soldering techniques and circuit assembly using practical components\u003c\/li\u003e \u003cli\u003eFinished circuit board with populated or unpopulated components\u003c\/li\u003e \u003cli\u003eDigital time display with LED segments or LCD display\u003c\/li\u003e \u003cli\u003ePower supply via battery or external voltage source\u003c\/li\u003e \u003cli\u003eSuitable for beginners with basic electronics knowledge\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis soldering practice kit teaches the basics of soldering through a functional project. By building a digital clock, beginners learn to correctly place and solder individual components while also achieving an understandable end result. The project combines craftsmanship and electronics in a practical way.\u003c\/p\u003e \u003cp\u003eThe circuit board contains a quartz oscillator for time generation and the necessary counter and driver chips for the display. Those who are not yet familiar with soldering can practice on real contacts, learning to avoid solder bridges and recognize cold solder joints. The project requires no programming and works immediately after completion.\u003c\/p\u003e \u003cp\u003eIn an educational context, the kit is used to teach practical skills in electronics or electrical engineering classes. In private settings, hobbyists build the project to understand circuit logic. The clock is also specifically used for beginner training courses in workshops and makerspaces. As a craft project for many hours of assembly, it provides continuous engagement with immediately visible results.\u003c\/p\u003e \u003cp\u003eA soldering iron, solder and a tip cleaner are required for assembly. Depending on the state of assembly, either the complete set of components must be obtained or prefabricated components must be completed. A supply voltage of typically 5 V or a suitable battery provides the power. The completed project is not suitable for continuous operation in damp or corrosive environments.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eSoldering involves temperatures above 350 degrees Celsius; touching the soldering iron or solder joint can cause burns. The kit is intended exclusively for educational workshops, hobby workshops, and testing and development purposes, and is not suitable for installation in household electrical systems. If you have questions about proper soldering or the power supply, consult a qualified electrician or an experienced electronics technician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Soldering practice kit - Digital clock\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998325317981,"sku":"F23107290","price":7.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-bausatz-digitaluhr-funduino-6813400.png?v=1791495887"},{"product_id":"chassis-fur-arduino-roboter-mit-einer-achse-plus-rolle","title":"2WD robot chassis - acrylic, 2 geared motors 3-6 V, for Arduino","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAcrylic chassis for two-wheel-drive robots with two geared motors (3–6 V) and a freely rotating caster wheel\u003c\/li\u003e \u003cli\u003eEncoder discs on the wheel axles enable optical speed measurement\u003c\/li\u003e \u003cli\u003ePre-drilled base plate for Arduino, motor driver, and sensors\u003c\/li\u003e \u003cli\u003eIntegrated battery holder\u003c\/li\u003e \u003cli\u003eTransparent acrylic provides a view of the mechanics\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis robot chassis provides a mechanical base for two-wheel-drive vehicles. The transparent acrylic chassis is driven by two geared motors, while a freely rotating caster wheel on the underside serves as the third support point and keeps the vehicle balanced while driving and cornering.\u003c\/p\u003e \u003cp\u003eThe geared motors operate with 3 to 6 V DC. The integrated gearbox converts the motor speed into a wheel speed suitable for driving. The wheel axles feature encoder discs with slots or holes that are detected by an optical fork sensor, enabling the microcontroller to determine the distance traveled and speed and adjust the motor power accordingly.\u003c\/p\u003e \u003cp\u003eThe base plate is covered with mounting holes to accommodate an Arduino or similar control boards, a motor driver, additional sensors, and a battery holder. This flexibility eliminates the need for custom constructions. Typical projects include line-following robots that follow a drawn path, vehicles that detect and avoid obstacles, or remote-controlled models.\u003c\/p\u003e \u003cp\u003eFor standalone operation, a motor driver module for controlling the motors, a microcontroller for processing sensor data and controlling the motors, and a battery or rechargeable battery as a power source are still required. The suitable driver IC and power supply depend on the selected control board.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe chassis is intended exclusively for building prototypes and for testing and development purposes. The geared motors must not be operated with mains voltage; use only batteries or rechargeable batteries in the 3–6 V voltage range. If you have questions about the power supply or motor driver selection, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003ePackage Contents\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x chassis for Arduino\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998346092893,"sku":"F23107456","price":5.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/chassis-fuer-arduino-roboter-mit-einer-achse-plus-rolle-funduino-3703931.jpg?v=1791496467"},{"product_id":"lotubung-linienverfolger-fahrzeug-chassis-roboter","title":"Soldering kit Line-following vehicle - LM393, 3 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSoldering kit for a line-following vehicle with two photoresistors\u003c\/li\u003e \u003cli\u003eControl by LM393 comparator without a microcontroller\u003c\/li\u003e \u003cli\u003eTwo DC motors with wheels for propulsion\u003c\/li\u003e \u003cli\u003e3 V operating voltage, powered by two AA batteries (not included)\u003c\/li\u003e \u003cli\u003eCircuit board with resistors, LEDs, potentiometer, capacitors, and transistors\u003c\/li\u003e \u003cli\u003eFollows black lines approximately 16 mm wide or wider\u003c\/li\u003e \u003cli\u003eAssembly and soldering practice in several steps, with component positions labeled on the circuit board\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis soldering kit teaches the basics of electronics while creating a functional line-following vehicle. The vehicle detects a black track using two photoresistors on its underside and automatically steers back when it deviates from the course. Assembly provides practical training in soldering, sensor technology, and motor control in one project.\u003c\/p\u003e \u003cp\u003eTwo photoresistors measure the light reflected by the track. The LM393 comparator continuously compares both sensors and controls the drive transistors so that the vehicle stays on the line. When it detects that one side has moved over the black line, it slows the motor on that side while the other motor runs faster. This allows the vehicle to automatically correct its course.\u003c\/p\u003e \u003cp\u003eAssembly is completed step by step: resistors, the IC socket, switch, potentiometer, transistors, electrolytic capacitors, and LEDs are soldered according to the markings on the circuit board. The battery wires are then connected to the marked solder points, followed by the mechanical assembly of the motors, wheels, and chassis. The finished vehicle is suitable for educational projects in electronics and sensor technology as well as school competition projects.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eSoldering involves high temperatures and solder fumes; good ventilation is required, and protective equipment is recommended. The device is intended exclusively for educational purposes, prototype construction, and soldering practice, not for installation in household power circuits or continuous operation in uncontrolled environments. Work on or near an electrical installation is reserved for qualified electricians; if you are unsure about the power supply, consult a qualified electrician before use.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* Soldering Practice - Line-Following Vehicle (Chassis \/Robot)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998353105245,"sku":"F23107154","price":5.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-linienverfolger-fahrzeug-chassis-roboter-funduino-4478588.jpg?v=1791496471"},{"product_id":"lotubung-bausatz-discolicht-soundgesteuerte-lichtanlage","title":"Soldering kit Disco light - sound-controlled via microphone, 5 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eEducational kit for soldering your own sound-controlled disco lights\u003c\/li\u003e \u003cli\u003eMicrophone responds to music and sounds and controls LED lights\u003c\/li\u003e \u003cli\u003eSoldering experience required; all components are prepared for soldering\u003c\/li\u003e \u003cli\u003eVoltage: 5 V, powered via USB or batteries\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis educational kit teaches practical soldering techniques by building a sound-controlled disco light system. The circuit detects sound signals using a built-in microphone and controls colored LEDs that light up in rhythm with the music.\u003c\/p\u003e \u003cp\u003eThe operating principle is based on amplifying audio signals, which trigger a threshold circuit and thereby activate the LEDs. The components are soldered by hand onto the pre-printed circuit board, requiring basic knowledge of how to use a soldering iron and solder alloy. Precision soldering is not required; the spacing between the solder points is generous.\u003c\/p\u003e \u003cp\u003eThe finished module is suitable for experiments with light synchronization, visualizing music sources in room discos, or as party decoration. With an operating voltage of 5 V, it runs on standard USB power supplies or four AA batteries, depending on the intended operating time and available space.\u003c\/p\u003e \u003cp\u003eYou will need a soldering iron (25 to 40 watts), solder, a fume extraction system or good ventilation, and approximately two to three hours of working time. The microphone sensor's datasheet is available online and explains its precise frequency response. The light effect is significantly weaker at ambient brightness levels above 300 lux.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe device is intended exclusively for testing and development purposes and for building prototypes. When soldering with lead-containing alloys, ensure adequate ventilation and avoid inhaling solder fumes. Not intended for connection to household electrical systems; work on or near electrical installations must be carried out by qualified electricians.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Soldering Practice (Kit) - Disco Light - Sound-Controlled Lighting System\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998357725533,"sku":"F23108771","price":2.71,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-bausatz-discolicht-soundgesteuerte-lichtanlage-funduino-2481432.jpg?v=1791496473"},{"product_id":"gummiband-propeller-fahrzeug-diy","title":"Propeller vehicle wooden kit - rubber band drive, 4 wheels","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWooden kit for a vehicle with a rubber-band propeller drive\u003c\/li\u003e \u003cli\u003eFour plastic wheels with rubber tires\u003c\/li\u003e \u003cli\u003eMechanical drive without electricity or a motor\u003c\/li\u003e \u003cli\u003eCan be assembled without tools or glue\u003c\/li\u003e \u003cli\u003eSandpaper and wooden sticks included\u003c\/li\u003e \u003cli\u003eAll parts made of plywood and plastic\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe kit consists of plywood parts that are broken out and assembled without tools. Four wheels with rubber tires are mounted on wooden axles and allow free movement. Two wooden sticks form the supports between the chassis and the propeller holder.\u003c\/p\u003e \u003cp\u003eThe drive operates purely mechanically via a rubber band between the chassis and the propeller. Manually turning the propeller several times stores tension in the rubber band. When released, this energy is converted into rotational momentum, generating airflow that propels the vehicle. No electricity or battery is required.\u003c\/p\u003e \u003cp\u003eThe system is suitable for exploring physical principles such as energy conversion and thrust in a practical way. In school lessons, movement sequences and efficiency can be observed. The driving performance of different designs can also be directly compared in competitions.\u003c\/p\u003e \u003cp\u003eAfter breaking the parts out of the sheet, the included sandpaper smooths the edges. Assembly requires neither glue nor tools, and the exposed mechanical system remains fully visible.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe vehicle is a kit for school projects and hobby assembly. After assembly, sharp wooden edges should be checked. When operating with the rubber band tensioned, keep a safe distance from the face and eyes, as the rubber band or propeller may come loose if used incorrectly.\u003c\/p\u003e \u003ch4\u003ePackage Contents\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Rubber-Band Propeller Vehicle DIY\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998365393245,"sku":"F23107386","price":2.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gummiband-propeller-fahrzeug-diy-funduino-3125292.png?v=1791495909"},{"product_id":"lotubung-elektronischer-wurfel-icsk057a-mit-ne555-cd4017","title":"Electronic dice soldering kit ICSK057 A - NE555, CD4017, 6 LEDs","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSoldering practice electronics project for assembling an electronic die\u003c\/li\u003e \u003cli\u003eNE555 timer for clock generation and counting logic\u003c\/li\u003e \u003cli\u003e6 LEDs for the die pips, controlled by a decoder IC\u003c\/li\u003e \u003cli\u003eEquipped with resistors, capacitors, and diodes\u003c\/li\u003e \u003cli\u003eHand-soldered components on a perforated circuit board\u003c\/li\u003e \u003cli\u003eRandom number from 1 to 6 at the press of a button, with a new roll after each activation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe electronic die is an electronics learning project that provides hands-on experience in assembling and soldering various components. An NE555 circuit generates a rapid clock signal, which uses a counter IC to switch the six LEDs in quick succession. A decoder IC translates the digital count values into die patterns and illuminates exactly the LEDs corresponding to the rolled number.\u003c\/p\u003e \u003cp\u003ePressing the button stops the sequence and holds the current number. A new activation resets the process and starts the cycle again. This functionality makes the project ideal for beginners who want to understand basic clock, counting, and decoding concepts while also practicing their soldering skills.\u003c\/p\u003e \u003cp\u003eThe die operates independently and requires only an external DC power supply between 5 and 9 volts, such as a standard battery or a USB laboratory power supply. The fully assembled board, soldered before shipping, allows immediate testing before beginning your own soldering work. Typical applications include electronics training and hobby courses, maker workshops, soldering practice, and private experiments with logic circuits.\u003c\/p\u003e \u003cp\u003eNo prior knowledge of electronics is required, although experience with a soldering iron makes the work easier. All necessary components are included in the kit. An external power supply or battery is required for operation; the device is intended exclusively for prototyping and educational purposes.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis product is intended exclusively for building prototypes and for testing and development purposes and is not intended for installation in the household electrical system. Working with a soldering iron requires caution to prevent burns and adequate ventilation due to solder fumes. If you have questions about correct assembly, consult a qualified electrician before commissioning the device.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Soldering Practice Electronic Die (ICSK057A) with NE555 CD4017\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998368571741,"sku":"F23107652","price":3.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/loetuebung-elektronischer-wuerfel-icsk057a-mit-ne555-cd4017-funduino-2415778.png?v=1791495916"},{"product_id":"felge-rad-reifen-fur-n20-motoren-chassis","title":"Wheel for N20 geared motor - rim with rubber tire, Ø 65 mm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eComplete wheel with rim and mounted tire for N20 motors\u003c\/li\u003e \u003cli\u003eDiameter 65 mm, width 26 mm\u003c\/li\u003e \u003cli\u003e3 mm bore fits directly onto N20 motor shafts\u003c\/li\u003e \u003cli\u003ePlastic rim with rubber tire for traction\u003c\/li\u003e \u003cli\u003eSuitable for small robots, vehicles, and mobile chassis with a total weight of up to approximately 500 g\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis wheel is a universal drive solution for vehicles based on N20 geared motors. The 65 mm rim with its mounted rubber tire is fitted directly onto the 3 mm motor shaft and requires no additional fastening. With the gear ratios commonly used, the diameter provides practical driving speeds between 0.5 and 2 m\/s.\u003c\/p\u003e \u003cp\u003eThe rubber tire provides sufficient traction to drive four wheels of this type; with four N20 motors, it creates a stable vehicle chassis. The plastic rim is wear-resistant and suitable for typical laboratory environments as well as indoor and outdoor surfaces. Cornering without slipping is easily possible on level floors.\u003c\/p\u003e \u003cp\u003eThe wheel fits any N20 motor chassis without modification. To build a four-wheel-drive vehicle, four wheels, four motors with the appropriate gearing, and a vehicle frame are required; the wheels themselves already provide the correct geometry for symmetrical arrangement.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis accessory is not intended for operation with household electrical installations. It is intended exclusively for building prototypes and for testing and development purposes, and is used with N20 DC motors supplied with low voltages.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cp\u003e1x rim \/ wheel \/ tire for N20 motors\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998373618013,"sku":"F23107355","price":1.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/felge-rad-reifen-fuer-n20-motoren-chassis-funduino-5243806.png?v=1791496484"},{"product_id":"56-mm-rad-fur-micro-servo-sg90-sg92-mg90-servo-wheel-fur-robotik-modellbau","title":"Wheel for micro servo - Ø 56 mm, SG92, MG90","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlastic wheel for common micro servos with a 4 mm shaft diameter\u003c\/li\u003e \u003cli\u003eDiameter 56 mm, suitable for SG90, SG92, and MG90 servos\u003c\/li\u003e \u003cli\u003eFastened with four flat-head screws\u003c\/li\u003e \u003cli\u003eSuitable for mobility applications and mechanical drives\u003c\/li\u003e \u003cli\u003ePlastic material with black-and-white coloring\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis 56-millimeter wheel connects common micro servos directly to mechanical loads. The 4-millimeter shaft diameter fits the motor shafts of SG90, SG92, and MG90 servos. It is fastened with four flat-head screws that keep the wheel centered and create a secure connection without an additional coupling.\u003c\/p\u003e \u003cp\u003eThe plastic wheel is suitable for vehicle-like constructions in which two or four wheels are driven by four different servos. It can also be used as a drive wheel for elevators or as a rotary drive for measuring instruments. The black-and-white coloring enables optical speed measurement, for example in control projects.\u003c\/p\u003e \u003cp\u003eThe limits of the servo used apply during operation. The wheel itself can only carry the load supplied by the motor. At higher torques, plastic wheels may slip or wear; metal alternatives are required for such applications. The wheel is supplied without mounting hardware and requires four M2 or M2.5 screws for attachment.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eDuring operation, the rotating wheel can catch hair, clothing, or fingers. Do not touch moving parts during operation. The product is intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1× 56 mm servo wheel for SG90\/SG92\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66042598195549,"sku":"F23110462","price":1.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/3607-F23110462_01.png?v=1791497912"},{"product_id":"chassis-rad-felge-mit-reifen-rot-silber-66mm","title":"Wheel Ø 66 mm - rim with tire, red-silver","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eComplete wheel with rim and tire, diameter 66 mm\u003c\/li\u003e \u003cli\u003eRed and silver two-tone design\u003c\/li\u003e \u003cli\u003eSuitable for chassis assemblies and robotic vehicles\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis wheel completes mobile platforms and chassis systems. The 66 mm version is suitable for medium-sized vehicle assemblies where ground clearance and traction are required on level to slightly uneven surfaces.\u003c\/p\u003e \u003cp\u003eThe red and silver rim-and-tire combination combines grip with weight and rolling characteristics. The tire and rim are preassembled as a unit, so no assembly is required. Multiple wheels enable omnidirectional or differential drive concepts.\u003c\/p\u003e \u003cp\u003eIt is suitable for small to medium-sized robots, sensor cars for measurement runs, or stationary turntables. An axle, hub, or motor adapter is required for operation; the necessary components depend on the chassis mounting geometry.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThis wear part is subject to normal wear and may become worn; inspect wear parts regularly and replace them if damaged. The product is intended exclusively for prototype and experimental assemblies.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66042685882717,"sku":"F23110188","price":3.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/3472-F23110188_01.png?v=1791497831"},{"product_id":"drohnen-kit-mit-lhi-qav250-rahmen-inkl-flight-controller-und-motoren","title":"QAV250 drone building kit - carbon fiber frame, CC3D, 4 motors, 2300 KV","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMini racing drone kit with a 250 mm diagonal, unassembled carbon fiber frame\u003c\/li\u003e \u003cli\u003eCC3D flight controller with STM32 microcontroller, 3-axis gyro, and accelerometer\u003c\/li\u003e \u003cli\u003eFour brushless MT2204 motors with 2300 KV, four Simonk ESCs rated for up to 11 A continuous current\u003c\/li\u003e \u003cli\u003eUSB-configurable under Windows, Mac, and Linux\u003c\/li\u003e \u003cli\u003e5 V, 1 A BEC output for receiver and peripherals\u003c\/li\u003e \u003cli\u003ePower distribution and LED mount on a central distribution board\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis mini racing drone kit contains all the main components for assembling an FPV racing quadcopter with a 250 mm diagonal. The carbon fiber frame is supplied unassembled; the flight controller, motors, ESCs, and propellers must be installed separately. The kit is therefore intended for users who want to build and calibrate their drone from the ground up.\u003c\/p\u003e \u003cp\u003eThe CC3D board controls flight and stabilization via an STM32 microcontroller with 128 KB of flash memory. An integrated 3-axis gyro and accelerometer detect rotations and inclinations in real time. Configuration is performed via USB without requiring separate driver installation, and the software runs on common operating systems. The BEC system supplies the receiver and other electronics with stabilized 5 V.\u003c\/p\u003e \u003cp\u003eFour MT2204 motors with a speed constant of 2300 KV drive the propellers, controlled by four Simonk ESCs. These ESCs support up to 11 A continuous current and up to 16 A for short periods. They are designed for 2 to 3-cell LiPo batteries, allowing the use of small, lightweight batteries. A central distribution board consolidates the power supply and also serves as a mount for status lights.\u003c\/p\u003e \u003cp\u003eOperation requires a remote control system with a suitable receiver and a 2S to 3S LiPo battery; neither is included. With these components, the kit is suitable for FPV racing and hobby aviation, where fast response and agility are required.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe battery must not be connected to the household mains power supply. This kit is intended exclusively for constructing prototypes and for testing and development purposes. Before initial operation, ensure that all propellers are securely attached and that all connectors are connected correctly.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x drone kit with LHI QAV250 frame, including flight controller and motors\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66042692796765,"sku":"F23110197","price":99.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/3477-F23110197_01.jpg?v=1791497835"},{"product_id":"master-sechskant-radnabe-verbreiterung-fur-rc-cars-4stk-fur-trx-4-crawler","title":"Wheel spacers for RC car - hexagonal wheel hub, 4 pieces, 6-12 mm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSpacers for widening the track on RC car wheel hubs, four-piece set\u003c\/li\u003e \u003cli\u003eHexagonal internal thread fits standard wheel hub hexes\u003c\/li\u003e \u003cli\u003eAvailable in multiple sizes\u003c\/li\u003e \u003cli\u003ePlastic, lightweight and wear-resistant\u003c\/li\u003e \u003cli\u003eInstallation requires no tools\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eTrack wideners for RC cars increase the track width and improve driving stability. These wheel hub extensions are mounted between the wheel and vehicle suspension and increase the track width for greater grip in corners.\u003c\/p\u003e \u003cp\u003eThe four-piece set contains four identical plastic rings with hexagonal internal threads. They screw directly onto standard hexagonal wheel hubs without requiring additional tools. The lightweight plastic construction has minimal impact on the vehicle's weight.\u003c\/p\u003e \u003cp\u003eThese wideners are used for tuning RC models for drifting and street racing, where increased track width leads to better driving characteristics. On off-road vehicles, track widening improves stability on uneven terrain. For drag racing and speed runs with extreme acceleration, the wider contact patch also improves drivability.\u003c\/p\u003e \u003cp\u003eThe installation is suitable for RC cars with standard hexagonal wheel hubs. Compatibility with other hub systems must be checked accordingly. The exact track widening depends on the selected size.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis product is intended exclusively for model building and testing RC vehicles. Check compatibility with your vehicle model before use to prevent damage.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eTrack widening adapter set with 4 RC car wheel hubs - thickness according to selection\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"6 mm","offer_id":66042708394333,"sku":"F23110084","price":5.84,"currency_code":"EUR","in_stock":true},{"title":"8 mm","offer_id":66045726818653,"sku":"F23110085","price":5.84,"currency_code":"EUR","in_stock":true},{"title":"9 mm","offer_id":66045727342941,"sku":"F23110086","price":5.84,"currency_code":"EUR","in_stock":true},{"title":"10 mm","offer_id":66045727310173,"sku":"F23110087","price":5.84,"currency_code":"EUR","in_stock":true},{"title":"11 mm","offer_id":66045727441245,"sku":"F23110088","price":5.84,"currency_code":"EUR","in_stock":true},{"title":"12 mm","offer_id":66045727572317,"sku":"F23110089","price":5.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/1369-F23110084-M_01.png?v=1791490743"},{"product_id":"master-sechskant-radnaben-adapterset-fur-rc-fahrzeuge-1-10-massstab-4stk-15-20-25mm","title":"Wheel hub adapter, hexagonal - RC vehicle 1\/10, 4 pieces, 15-25 mm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter set for hexagonal wheel hubs on RC vehicle models\u003c\/li\u003e \u003cli\u003eAvailable in several sizes\u003c\/li\u003e \u003cli\u003ePlastic construction\u003c\/li\u003e \u003cli\u003eSuitable for common wheel hub types\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis adapter set connects hexagonal wheel hubs to the drive shafts of RC vehicles. The adapters enable wheel hub types to be replaced or wheels with different hub profiles to be used on a vehicle without having to redesign the axles.\u003c\/p\u003e \u003cp\u003eThe set consists of plastic adapters that are inserted between the wheel hub and the drive shaft. They are available in several sizes to accommodate different wheel hub spacings. The correct adapters depend on the vehicle model and hub design.\u003c\/p\u003e \u003cp\u003eThe set is typically used when tuning RC models and fitting lighter or more professional wheels. It also allows switching between off-road and on-road wheels on a vehicle chassis without having to keep multiple sets of axles on hand.\u003c\/p\u003e \u003cp\u003eBefore purchasing, compatibility with the relevant vehicle type and its axle design should be confirmed. If in doubt, comparison with the model's original adapters is recommended.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis product is intended exclusively for the construction and maintenance of RC models in private use. All installation work should be carried out carefully with suitable tools to avoid damage to threads or hubs.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x hexagonal wheel hub adapter set for RC vehicles, 1\/10 scale, - 15\/20\/25mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"15 mm","offer_id":66042709344605,"sku":"F23110090","price":6.33,"currency_code":"EUR","in_stock":true},{"title":"20 mm","offer_id":66045728194909,"sku":"F23110091","price":6.33,"currency_code":"EUR","in_stock":true},{"title":"25 mm","offer_id":66045749952861,"sku":"F23110092","price":6.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/1370-F23110090-M_01.png?v=1791490791"},{"product_id":"drohnen-kit-qav180-carbon-fiber-kohlefaser-fur-fpv-quadrocopter","title":"QAV180 drone frame - carbon fiber, 180 mm, for FPV quadcopter","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCarbon fiber frame with a 180 mm diagonal for FPV drones\u003c\/li\u003e \u003cli\u003eFour motor mounts for common brushless motors\u003c\/li\u003e \u003cli\u003eSupports loads of up to approximately 500 g\u003c\/li\u003e \u003cli\u003ePreassembled unit significantly reduces assembly time\u003c\/li\u003e \u003cli\u003ePower distribution and cable harness already installed\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis frame forms the support system for self-built FPV drones in the 180 format. Carbon fiber makes it sufficiently rigid for fast maneuvers while keeping it light enough to maintain a reasonable balance between battery weight and payload capacity.\u003c\/p\u003e \u003cp\u003eThe kit comes as a preassembled unit with the motor connections and power distribution already prepared. This reduces assembly effort compared with assembling the drone from individual parts. The payload capacity of around 500 g is sufficient for a typical flight battery, receiver, FPV camera, and required electronics, with no spare capacity, so the total weight must be strictly observed.\u003c\/p\u003e \u003cp\u003eBrushless motors, an ESC, a LiPo flight battery, an FPV transmitter and receiver, and a camera, as well as control software, are additionally required. The exact component requirements depend on the desired equipment level.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eLiPo batteries must not be left unattended while charging and require special chargers. This product is intended exclusively for building prototypes and for testing and development purposes and is not approved for use in commercial flight operations. All work on the electrical installation must be carried out in compliance with the applicable drone traffic regulations; if there is any uncertainty regarding legal approval and safe operation, consult an experienced person or a qualified electrician before commissioning.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66042927546717,"sku":"F23108440","price":27.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/4558-F23108440_01.png?v=1791482820"},{"product_id":"kitronik-mai-z-mausroboter-fur-bbc-micro-bit","title":"Kitronik Mai-Z mouse robot - programmable for BBC micro:bit","description":"\u003ch2 class=\"PDq2pG_selectionAnchorContainer\" data-start=\"0\" data-end=\"83\"\u003e\u003cstrong\u003eProgrammable mouse robot for BBC micro:bit, STEM lessons and coding projects\u003c\/strong\u003e\u003c\/h2\u003e \u003cp data-start=\"85\" data-end=\"350\"\u003eThe Kitronik Mai-Z Mouse Robot is a programmable robot buggy for the BBC micro:bit. It was developed for young learners aged 8 to 14 and supports hands-on programming, robotics, sensor technology and interactive STEM projects with MakeCode.\u003c\/p\u003e \u003ch3 data-start=\"352\" data-end=\"362\"\u003eHighlights\u003c\/h3\u003e \u003cul data-start=\"364\" data-end=\"1102\"\u003e \u003cli data-section-id=\"hinb9g\" data-start=\"364\" data-end=\"412\"\u003eProgrammable mouse robot for BBC micro:bit\u003c\/li\u003e \u003cli data-section-id=\"velpjf\" data-start=\"413\" data-end=\"465\"\u003eSuitable for learners aged 8 to 14\u003c\/li\u003e \u003cli data-section-id=\"h04v8v\" data-start=\"466\" data-end=\"521\"\u003eProgramming with MakeCode using drag-and-drop blocks\u003c\/li\u003e \u003cli data-section-id=\"1hozo8g\" data-start=\"522\" data-end=\"585\"\u003eCompatible with MakeCode CreateAI for gesture-based control\u003c\/li\u003e \u003cli data-section-id=\"m0c6xw\" data-start=\"586\" data-end=\"664\"\u003eSupports screen-free programming via optional expansion pack\u003c\/li\u003e \u003cli data-section-id=\"q1gd7f\" data-start=\"665\" data-end=\"686\"\u003eLine-following sensors\u003c\/li\u003e \u003cli data-section-id=\"1qyzbgp\" data-start=\"687\" data-end=\"705\"\u003eDistance sensors\u003c\/li\u003e \u003cli data-section-id=\"kaho8\" data-start=\"706\" data-end=\"732\"\u003eEdge-detection sensors\u003c\/li\u003e \u003cli data-section-id=\"rxj333\" data-start=\"733\" data-end=\"761\"\u003e4 programmable ZIP LEDs\u003c\/li\u003e \u003cli data-section-id=\"xu47wy\" data-start=\"762\" data-end=\"789\"\u003eIntegrated speaker\u003c\/li\u003e \u003cli data-section-id=\"1wkbsny\" data-start=\"790\" data-end=\"819\"\u003eRechargeable LiPo battery\u003c\/li\u003e \u003cli data-section-id=\"1v0wnyl\" data-start=\"820\" data-end=\"841\"\u003eUSB-C charging port\u003c\/li\u003e \u003cli data-section-id=\"1u4wdrl\" data-start=\"842\" data-end=\"875\"\u003ePen holder for drawing tasks\u003c\/li\u003e \u003cli data-section-id=\"rpgwb6\" data-start=\"876\" data-end=\"925\"\u003eShovel for creative and playful tasks\u003c\/li\u003e \u003cli data-section-id=\"4ofut3\" data-start=\"926\" data-end=\"952\"\u003emicro:bit Edge Connector\u003c\/li\u003e \u003cli data-section-id=\"16ckxly\" data-start=\"953\" data-end=\"991\"\u003eAccess to the micro:bit A\/B buttons\u003c\/li\u003e \u003cli data-section-id=\"fc0y8i\" data-start=\"992\" data-end=\"1025\"\u003eOn\/off switch and status LED\u003c\/li\u003e \u003cli data-section-id=\"ul4bq4\" data-start=\"1026\" data-end=\"1102\"\u003ePrecise motor control for straight-line travel, defined distances and angles\u003c\/li\u003e \u003c\/ul\u003e \u003ch3 data-start=\"1104\" data-end=\"1128\"\u003e\u003cstrong\u003eBenefits \/ applications\u003c\/strong\u003e\u003c\/h3\u003e \u003cp data-start=\"1130\" data-end=\"1608\"\u003eThe Kitronik Mai-Z Mouse Robot is suitable for coding clubs, STEM lessons, robotics projects, homeschooling and project-based learning. Learners can program the robot to follow lines, detect obstacles, detect edges, draw shapes or control movements using sensors and gestures. Combining the micro:bit, MakeCode and the integrated sensors provides a practical way to teach fundamental concepts in programming, robotics, logic and control.\u003c\/p\u003e \u003ch3 data-start=\"1610\" data-end=\"1626\"\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e \u003cp data-start=\"1628\" data-end=\"2560\"\u003eProduct: Kitronik Mai-Z Mouse Robot for BBC micro:bit\u003cbr data-start=\"1681\" data-end=\"1684\"\u003e Product type: Programmable mouse robot \/ educational robot\u003cbr data-start=\"1738\" data-end=\"1741\"\u003e Compatibility: BBC micro:bit\u003cbr data-start=\"1770\" data-end=\"1773\"\u003e Target group: Learners aged 8 to 14\u003cbr data-start=\"1813\" data-end=\"1816\"\u003e Programming: MakeCode block programming\u003cbr data-start=\"1860\" data-end=\"1863\"\u003e AI\/gesture control: Compatible with MakeCode CreateAI\u003cbr data-start=\"1916\" data-end=\"1919\" data-is-only-node=\"\"\u003e Screen-free programming: Via optional screen-free programming expansion pack\u003cbr data-start=\"2013\" data-end=\"2016\"\u003e Sensors: Line-following sensors, distance sensors, edge-detection sensors\u003cbr data-start=\"2089\" data-end=\"2092\"\u003e LEDs: 4x programmable ZIP LEDs\u003cbr data-start=\"2125\" data-end=\"2128\"\u003e Audio: Integrated speaker\u003cbr data-start=\"2160\" data-end=\"2163\"\u003e Battery: Rechargeable LiPo battery\u003cbr data-start=\"2196\" data-end=\"2199\"\u003e Charging port: USB-C\u003cbr data-start=\"2219\" data-end=\"2222\"\u003e Charging requirements: 5 V, at least 1 A via USB-C\u003cbr data-start=\"2269\" data-end=\"2272\"\u003e Operation: On\/off switch, status LED, access to micro:bit A\/B buttons\u003cbr data-start=\"2345\" data-end=\"2348\"\u003e micro:bit connection: Edge Connector\u003cbr data-start=\"2383\" data-end=\"2386\"\u003e Additional features: Pen holder, shovel\u003cbr data-start=\"2425\" data-end=\"2428\"\u003e Motor control: Precise control for straight-line travel, defined distances and angles\u003cbr data-start=\"2513\" data-end=\"2516\"\u003e Length: 117 mm\u003cbr data-start=\"2529\" data-end=\"2532\"\u003e Width: 105 mm\u003cbr data-start=\"2546\" data-end=\"2549\"\u003e Height: 45 mm\u003c\/p\u003e \u003ch3 data-start=\"2562\" data-end=\"2574\"\u003e\u003cstrong\u003ePackage contents\u003c\/strong\u003e\u003c\/h3\u003e \u003cul data-start=\"2576\" data-end=\"2745\" data-is-last-node=\"\" data-is-only-node=\"\"\u003e \u003cli data-section-id=\"116e73t\" data-start=\"2576\" data-end=\"2625\"\u003e1x Kitronik Mai-Z Mouse Robot for BBC micro:bit\u003c\/li\u003e \u003cli data-section-id=\"1pfap99\" data-start=\"2626\" data-end=\"2662\"\u003e1x 20 cm USB-A to USB-C charging cable\u003c\/li\u003e \u003cli data-section-id=\"1aetsin\" data-start=\"2663\" data-end=\"2693\"\u003e1x A6 double-sided folded leaflet\u003c\/li\u003e \u003cli data-section-id=\"1s6kdfu\" data-start=\"2694\" data-end=\"2714\"\u003ePage 1: Instructions\u003c\/li\u003e \u003cli data-section-id=\"1o6uh74\" data-start=\"2715\" data-end=\"2745\" data-is-last-node=\"\"\u003ePage 2: Line-following track\u003c\/li\u003e \u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":66042947993949,"sku":"F25111328","price":52.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kitronik-mai-z-mausroboter-fuer-bbc-microbit-funduino-7427391.jpg?v=1791482710"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/collections\/master-loetuebung-herz-pulsierende-leds-verschiedene-farben-funduino-2605741.png?v=1791290630","url":"https:\/\/funduino.com\/en\/collections\/kits-1.oembed?page=2","provider":"Funduino","version":"1.0","type":"link"}