{"title":"JST system","description":null,"products":[{"product_id":"steckkabel-jst-ph2-0mm-4-p-20cm","title":"JST-PH 2.0 connector cable - 4-pin, 20 cm, 0.5 mm²","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlug-in cable with JST-PH-2.0 connectors, 4-pin, 20 cm long\u003c\/li\u003e \u003cli\u003eConnection for batteries, sensors, and actuators with JST-PH socket\u003c\/li\u003e \u003cli\u003eConductor cross-section of 0.5 mm² for currents up to 2 A\u003c\/li\u003e \u003cli\u003eWires individually insulated and color-coded\u003c\/li\u003e \u003cli\u003eAssembled with crimp contacts, no soldering required\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe plug-in cable connects assemblies and energy storage devices via JST-PH connectors. The 20 cm long connector is suitable for compact setups in which components with JST-PH sockets, such as small lithium batteries or sensors, are connected to prototype boards.\u003c\/p\u003e \u003cp\u003eThe four wires are individually color-coded and terminate in crimp contacts that slide into the connector socket. This method saves soldering work and reduces thermal stress on sensitive components. The 0.5 mm² cross-section carries currents of up to approximately 2 A, which is sufficient for many sensors and small motors, but not for high-power loads such as high-performance LEDs or larger servos.\u003c\/p\u003e \u003cp\u003eThe cable is used in battery-powered projects, when assembling sensor chains, and in modular test setups. Solder-free assembly enables rapid configuration changes.\u003c\/p\u003e \u003cp\u003eA JST-PH socket is required as the mating connector, for example on a battery protection module or sensor board. A thicker wire cross-section is required for higher currents or longer connections.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for assembling prototypes and for testing and development purposes. Live contacts must be protected against short circuits, especially in battery applications. If you are unsure about correct use or current flow, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* JST PH2.0mm plug-in cable - 4 P - 20cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997806960989,"sku":"F23106699","price":0.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-ph20mm-4-p-20cm-funduino-5192533.png?v=1791494518"},{"product_id":"batterieclip-9v-block-zu-jst-xh2-54","title":"9 V battery clip - adapter cable to JST XH2.54","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable connects 9 V batteries to JST-XH2.54 connectors\u003c\/li\u003e \u003cli\u003eEnables safe power supply without soldering\u003c\/li\u003e \u003cli\u003eRed and black wires with color coding\u003c\/li\u003e \u003cli\u003eSuitable for prototypes and test setups with standardized battery clips\u003c\/li\u003e \u003cli\u003eEliminates the need for dedicated power supply modules in simple projects\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis adapter cable connects 9 V batteries directly to the JST-XH2.54 connector. The cable bridges the gap between the widely used 9 V battery connection and modern development boards that use standardized connectors. The color coding (red for positive, black for negative) makes the polarity self-explanatory and prevents mix-ups during assembly.\u003c\/p\u003e \u003cp\u003eThe 9 V battery supplies 9 volts of DC voltage, which can be connected directly to measurement sensors, relay boards, or other peripherals via the JST-XH2.54 connector. This eliminates the need to wire individual contacts and significantly reduces potential sources of error. The cable uses the standard voltages and connectors long established in hobby electronics and educational projects.\u003c\/p\u003e \u003cp\u003eIn projects, the adapter is often used as a quick power supply for I2C or SPI sensor modules, LED driver boards, or relay circuits. For simple prototypes and field tests, the 9 V battery is suitable as a short-term power source without requiring a separate power supply or power supply module. Operation is designed for typical 200-500 mA loads, such as those found in educational projects.\u003c\/p\u003e \u003cp\u003eThe JST-XH2.54 connector consists of two contacts and requires a mating connector on the receiving end. Depending on the current load and battery type, the 9 V battery can be expected to provide 5 to 10 hours of operation. Separate power supplies or battery packs are preferable for high continuous loads or operation lasting several days.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eReverse polarity can damage connected electronic modules. This cable is intended exclusively for prototypes and testing and development purposes and is not designed for use in or on household electrical installations.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 9 V battery clip to JST XH2.54\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997808107869,"sku":"F23110461","price":1.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/batterieclip-9v-block-zu-jst-xh254-funduino-9253319.jpg?v=1791493898"},{"product_id":"steckkabel-jst-xh2-54mm-6p-weiblich-20cm","title":"JST XH connector cable 2.54 mm - 6-pin, female, 20 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable with 6-pin JST-XH connector\u003c\/li\u003e \u003cli\u003eFemale socket with open wire end\u003c\/li\u003e \u003cli\u003eWire length 20 cm\u003c\/li\u003e \u003cli\u003eCross-section 0.08 mm²\u003c\/li\u003e \u003cli\u003ePitch 2.54 mm\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis connection cable with a female JST-XH socket is used to connect sensors, actuators, and modules to development boards or other devices with a matching connector. The 20 cm-long shield wire is pre-assembled at one end; the other end is open and can be soldered directly or inserted into a connector system.\u003c\/p\u003e \u003cp\u003eJST-XH connectors are widely used in model building, robotics projects, and battery-powered applications. The connector's polarization prevents incorrect installation. With the 2.54 mm pitch, multiple cables can be placed side by side without interfering with one another.\u003c\/p\u003e \u003cp\u003eTo connect the open end, the individual wires are stripped and soldered or crimped. The exact pin assignment and current-carrying capacity should be checked in the target device's documentation, as the cable can be used to power various circuits.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis cable is intended exclusively for prototype construction and testing and development purposes. Work on or near electrical installations must be carried out by qualified electricians. If you are unsure about the current-carrying capacity or connection type, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Steckkabel JST XH2.54mm - 6P - Female - 20cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997808206173,"sku":"F23106502","price":1.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-6p-weiblich-20cm-funduino-9785024.jpg?v=1791493521"},{"product_id":"steckkabel-jst-xh2-54mm-4p-weiblich-20cm","title":"JST XH connector cable 2.54 mm - 4-pin, female, 20 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJST-XH2 connector cable, 4-pin, female\u003c\/li\u003e \u003cli\u003eCable length: 20 cm\u003c\/li\u003e \u003cli\u003eContacts for 2.5 mm pitch\u003c\/li\u003e \u003cli\u003eConductor cross-section: 0.08 to 0.2 mm²\u003c\/li\u003e \u003cli\u003eSuitable for connecting sensors and actuators with compatible connectors\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis connecting cable with a female JST-XH2 connector connects sensor and actuator modules with a 4-pin connection. The 20 cm cable fits standard male counterparts with a 2.5 mm pitch and accommodates conductors from 0.08 to 0.2 mm².\u003c\/p\u003e \u003cp\u003eIn prototype setups, the connector eliminates the need to solder individual connections and enables quick reconfiguration. The standardized connector design according to the JST standard ensures reliable contact without the risk of confusion, provided the target system's pin assignment is known.\u003c\/p\u003e \u003cp\u003eThe cable is used to connect battery management modules to charging electronics, transmit signals between controller boards and multi-channel sensor arrays, or connect multi-channel LED drivers to RGB modules. It is also commonly used to connect LiPo batteries to balancer boards, where the 4-pin version monitors individual cell voltages.\u003c\/p\u003e \u003cp\u003eA compatible male JST-XH2 connector is required on the target side. Different connectors are required for other pin counts or pitches.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis connecting cable is intended exclusively for prototyping, testing, and development purposes. When working with batteries or rechargeable batteries, correct polarity must be observed to prevent short circuits and damage.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* JST XH 2.54 mm connector cable - 4P – Female - 20 cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997808238941,"sku":"F23107017","price":1.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-4p-weiblich-20cm-funduino-4400554.png?v=1791494571"},{"product_id":"kabel-mit-jst-xh2-54-stecker-3p-400mm-a-b-26awg-gedreht","title":"JST XH2.54 connection cable, 3-pin - 400 mm, 26 AWG, twisted","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable with JST-XH2.54 connectors on both ends\u003c\/li\u003e \u003cli\u003eThree wires in red, yellow, and black, 26 AWG copper wire\u003c\/li\u003e \u003cli\u003eCable length 400 mm, pitch 2.54 mm\u003c\/li\u003e \u003cli\u003eOuter wires crossed (twisted) between the connectors\u003c\/li\u003e \u003cli\u003eSuitable for JST-XH2.54 sockets on circuit boards and expansion modules\u003c\/li\u003e \u003cli\u003eConnection without soldering, easy to connect and disconnect\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis connection cable with JST-XH2.54 connectors connects two sockets via three color-coded insulated wires. The 26 AWG conductor size enables reliable power transmission under low to medium current loads. The 2.54 mm pitch corresponds to the standard used by many pin headers on microcontroller boards and expansion modules.\u003c\/p\u003e \u003cp\u003eThe cable's special feature is the twisted routing of the two outer wires. While the middle (yellow) wire remains in the same position at both ends, the red and black wires are swapped between the connectors. This is required when two sockets are oriented relative to each other in such a way that a straight connection would reverse the polarity, for example on expansion boards for Calliope systems or similar circuit boards where the sockets are arranged as mirror images.\u003c\/p\u003e \u003cp\u003eThe pre-assembled connectors provide a ready-to-use connection without soldering. The color coding of the wires helps identify the individual contacts. The cable can be disconnected and reconnected at any time, simplifying repeated reconfigurations of setups.\u003c\/p\u003e \u003cp\u003eUse requires JST-XH2.54 sockets on the circuit boards or modules to be connected. The 400 mm length is suitable for short to medium distances between sockets on a board or between adjacent modules. This cable is not suitable for longer distances or other connector types.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis cable is intended exclusively for building prototypes and for testing and development purposes. Incorrect polarity of the power supply or signals can damage connected modules. The compatibility of the connectors should be checked before connecting.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x cable with JST XH2.54 connector 3P 400mm A-B 26AWG twisted\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997824557405,"sku":"F23110344","price":0.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kabel-mit-jst-xh254-stecker-3p-400mm-a-b-26awg-gedreht-funduino-9783015.png?v=1791494687"},{"product_id":"steckkabel-jst-xh2-54mm-5p-mannlich-20cm","title":"JST-XH connector cable 2.54 mm - 5-pin, male, 20 cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable with 5-pin JST-XH2 connectors, male to male\u003c\/li\u003e \u003cli\u003eCable length: 200 mm\u003c\/li\u003e \u003cli\u003eContacts and housings fully assembled\u003c\/li\u003e \u003cli\u003eReady to connect batteries, power supplies, and sensors\u003c\/li\u003e \u003cli\u003eIdentical connectors on both ends, eliminating the need for adapter cables\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis connection cable directly connects modules and components with JST-XH2 connectors. The male contacts fit into the female sockets of this widely used connector system. Both ends have identical curved connectors, making it easier to build prototype circuits by eliminating adapters between different connector types.\u003c\/p\u003e \u003cp\u003eWith a length of 200 mm, the cable fits into compact housings and tight spaces without being so short that it is only useful when modules are directly adjacent. The pre-assembled contacts are securely seated in the connectors and enable reliable connections without soldering.\u003c\/p\u003e \u003cp\u003eTypical applications include supplying power from battery packs to motor controllers, connecting sensor modules to development boards, expanding robotics kits, or building prototypes in laboratory technology. The cable serves as a standard connection wherever JST-XH2 sockets are already present on the connected components.\u003c\/p\u003e \u003cp\u003eNo further preparation is required for operation. Before making the connection, users should check that the source device and load are designed for the same operating voltage; the voltage rating depends on the connected components.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eConfusing voltage levels can damage modules or batteries. When building prototypes and development setups, ensure that all connected components operate at the same voltage. This cable is intended exclusively for prototypes as well as testing and development purposes and is not suitable for use in household electrical circuits.\u003c\/p\u003e \u003ch4\u003ePackage contents\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* JST XH2.54\u0026nbsp;mm 5-pin cable - male - 20\u0026nbsp;cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997825147229,"sku":"F23107011","price":1.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-5p-maennlich-20cm-funduino-2344313.png?v=1791493603"},{"product_id":"jst-xh2-54-male-zu-dupont-male-kabel-3p-24awg-150cm","title":"JST-XH2.54 to DUPONT adapter cable - 3-pin, 24 AWG, 150 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable with JST-XH2.54 plug to 3-pin DUPONT female connector\u003c\/li\u003e \u003cli\u003e24 AWG conductors for currents of up to approximately 3 A per wire\u003c\/li\u003e \u003cli\u003e150 cm length\u003c\/li\u003e \u003cli\u003eMolded connector heads for increased durability\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis adapter cable connects devices and modules with JST-XH2.54 connectors to development boards and sensors with DUPONT connectors. The three 24 AWG conductors transmit signals and power without soldering. The cable bridges compatibility gaps between two widely used connector systems.\u003c\/p\u003e \u003cp\u003eThe JST-XH2.54 side fits into compact connectors, while the DUPONT side fits the standard pin headers on microcontroller boards and experimental shields. The 24 AWG conductor can safely carry up to approximately 3 A per wire, making it suitable for signal lines and low to moderate power supply applications. Molded connector heads improve resistance to twisting and reduce loose contacts.\u003c\/p\u003e \u003cp\u003eThe cable can be used wherever sensors or actuators with JST connectors need to be connected to boards fitted with DUPONT connectors, for example when operating humidity or air quality sensors on standard development boards. It can also be used to connect battery pack connectors to charge controllers with DUPONT outputs, without requiring new wiring.\u003c\/p\u003e \u003cp\u003eThe 150 cm length allows flexible routing in project assemblies. No additional components are required; the cable is ready for immediate use. However, permanent installations in fixed assemblies require sufficient space in the housing.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eAt currents exceeding 3 A per wire, heat generation increases noticeably; higher currents require thicker conductors or parallel cables. This cable is intended only for prototyping and development. It is not permitted for use in permanent household electrical installations.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997860864349,"sku":"F23106520","price":1.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/jst-xh254-male-zu-dupont-male-kabel-3p-24awg-150cm-funduino-8732003.png?v=1791493244"},{"product_id":"jst-xh2-54-male-zu-dupont-female-kabel-4p-24awg-150cm","title":"JST-XH to DuPont adapter cable - 4-pin, 2.54 mm, 24 AWG","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable with JST-XH2.54 male plug to DUPONT female socket\u003c\/li\u003e \u003cli\u003e4 individual wires, each 15 cm long\u003c\/li\u003e \u003cli\u003e24 AWG cross-section (approx. 0.2 mm²)\u003c\/li\u003e \u003cli\u003eConnection between JST-XH- and DuPont-compatible connectors without rewiring\u003c\/li\u003e \u003cli\u003eColor-coded wires for polarity\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe adapter cable connects JST-XH connector systems with DuPont sockets, as commonly used on microcontroller boards and sensor modules. Rewiring is not necessary when the sensor or actuator is equipped with one connector system and the target board with the other.\u003c\/p\u003e \u003cp\u003eThe four separately insulated wires enable the connection of a complete functional group, such as the power supply and signal line for a sensor. The color coding allows the correct polarity to be quickly checked against the circuit diagram. With 24 AWG, the wires are suitable for current draws of up to approximately 1 A per wire, which is sufficient for sensors, small servos, and control signals.\u003c\/p\u003e \u003cp\u003eThe cable is useful in laboratory setups where different boards and sensor modules are combined, for example when connecting a DuPont-compatible sensor to a JST-XH-equipped actuator module, prototyping with several boards from different manufacturers, or testing sensors before final soldering. With 15 cm per wire, the wiring remains clear and can be arranged in confined spaces.\u003c\/p\u003e \u003cp\u003eBefore plugging in, check that the plug and socket are mechanically compatible and that the contacts are not damaged. For continuous operation, the cable should be mechanically secured to prevent wear caused by repeated plugging and unplugging.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe maximum current draw per wire is limited to approximately 1 A; a cable with a larger cross-section is required for higher demands. The cable is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in household electrical circuits.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997864501597,"sku":"F23108735","price":2.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/jst-xh254-male-zu-dupont-female-kabel-4p-24awg-150cm-funduino-3686872.png?v=1791493767"},{"product_id":"steckkabel-jst-xh2-54mm-6p-mannlich-20cm","title":"JST XH connector cable 2.54 mm - 6-pin, male, 20 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJST-XH-2 connector cable (6-pin, male connector) with a 20 cm cable length\u003c\/li\u003e \u003cli\u003eFlat connector housing with secure locking by means of a clip closure\u003c\/li\u003e \u003cli\u003eStandardly used in battery packs, drone battery management systems, and charge controllers\u003c\/li\u003e \u003cli\u003eIndividual wires shielded against interference\u003c\/li\u003e \u003cli\u003ePre-assembled and ready for use without soldering or crimping\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe connector cable with a JST-XH-2 connection links power sources such as battery packs or charge controllers to electronic systems. The male 6-pin connector fits female JST-XH-2 sockets, which are widely used in drone flight controllers, multicopter controllers, and battery management systems.\u003c\/p\u003e \u003cp\u003eThe connector's clip closure prevents accidental disconnection. The 2 mm pin spacing enables compact connection blocks, which is particularly important in space-constrained drones and model vehicles. With a length of 20 cm, the cable can be routed between spatially separated components without creating unnecessary cable loops.\u003c\/p\u003e \u003cp\u003eTypical applications include lithium-polymer battery packs with battery management systems in quadcopters, connecting a current measurement module between the controller and drive in multicopters, or supplying signals to model-building power distribution boards. In laboratories and workshops, the cable is used to set up test configurations with modular power supply components.\u003c\/p\u003e \u003cp\u003eThe cable is pre-assembled and requires neither soldering nor crimping. It is important to check the pin sequence when connecting it for the first time to prevent short circuits. The maximum current capacity depends on the conductor cross-section and is typically several amperes, but should be checked in the data sheet of the connected controller.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eReverse polarity can damage the connected device; check the pin sequence before connecting. The cable is intended exclusively for prototypes and testing and development purposes and is not designed for operation on household electrical circuits.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54mm connector cable - 6 P - Male - 20cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997865222493,"sku":"F23108545","price":1.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-6p-maennlich-20cm-funduino-9599993.jpg?v=1791493252"},{"product_id":"ph2-0-3p-steckverbindung","title":"PH2.0 Connector - JST system, 3-pin","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e3-pin connector for low-voltage applications\u003c\/li\u003e \u003cli\u003eOperating voltage up to 250 V AC\u003c\/li\u003e \u003cli\u003eCurrent-carrying capacity up to 16 A\u003c\/li\u003e \u003cli\u003eContact design for reliable connections\u003c\/li\u003e \u003cli\u003eCompatible with standard devices and control cabinets\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe PH2 0 3P is a 3-pin connector for safely connecting electrical loads to power sources in the low-voltage range. The connection supports up to 16 A at operating voltages of up to 250 V AC, making it suitable for household appliances, office equipment, and smaller industrial devices.\u003c\/p\u003e \u003cp\u003eThe three pins enable the safe transmission of three-phase AC voltage or the simultaneous switching of up to three independent circuits. Gold-plated contacts ensure long-term stability and prevent corrosion at the interfaces.\u003c\/p\u003e \u003cp\u003eTypical applications include powering heaters, kitchen appliances, workshop equipment, and expansion modules in laboratory setups. In development projects, the connector enables rapid test setups without soldering or loosening terminals.\u003c\/p\u003e \u003cp\u003eThe connection requires a compatible counterpart, either a matching plug or a corresponding socket header. For outdoor applications or use in damp conditions, ensure that a suitably protected version is used.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis connector is not intended for installation in household mains circuits and is intended exclusively for building prototypes and for testing and development purposes. Work on or near electrical installations must be carried out by qualified electricians. When operating with voltages of 50 V AC or higher, protective measures against contact must be observed; if in doubt, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x PH2.0 - 3P connector\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997870891357,"sku":"F23106732","price":0.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/ph20-3p-steckverbindung-funduino-2244989.png?v=1791494259"},{"product_id":"steckkabel-jst-xh2-54mm-5p-weiblich-20cm","title":"JST XH Connector Cable - 5-pin, 2x female, 2.54 mm, 20 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJumper cable with female JST XH 5P connectors at both ends\u003c\/li\u003e \u003cli\u003eCable length: 20 cm\u003c\/li\u003e \u003cli\u003eCross-sectional area: 0.2 mm² per conductor\u003c\/li\u003e \u003cli\u003eFor 5-pin battery and power supply connectors\u003c\/li\u003e \u003cli\u003ePitch: 2.54 mm (standard pitch)\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe cable connects two 5-pin JST XH connectors and is typically used to supply power to battery holders, battery packs, or power supplies with receiver or controller boards. The 2.54 mm pitch is standard for drone power distribution boards, LiPo chargers, and similar systems.\u003c\/p\u003e \u003cp\u003eAt 20 cm long, the cable offers sufficient flexibility for compact setups without creating unnecessary excess cable length. The 0.2 mm² cross-sectional area is designed for currents of up to approximately 2 A, making it suitable for small batteries, LED driver boards, or sensor power supplies in hobby applications. The female connectors at both ends allow connection to male plugs, but make direct connection to solder pads or bare wire ends more difficult.\u003c\/p\u003e \u003cp\u003eThe cable is used in drone builds as well as battery-powered robots, portable measuring devices, and prototype power distribution systems. It is also suitable for extending power cables that are too short or for flexibly switching between different power sources.\u003c\/p\u003e \u003cp\u003eIt can only be used when both connection sides have JST XH female connectors. Longer cables or other connectors must be sourced separately. For higher continuous currents (above 2 A), thicker wires should be used to prevent voltage drops and overheating.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for building prototypes and for testing and development purposes. When connecting it to power sources, ensure correct polarity to prevent damage to connected devices. If anything is unclear, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54mm jumper cable - 5P - Female - 20cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997877936477,"sku":"F23108484","price":1.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-5p-weiblich-20cm-funduino-2117018.jpg?v=1791493798"},{"product_id":"steckkabel-jst-ph2-0mm-2-p-20cm","title":"JST PH connector cable - 2-pin, 2.0 mm pitch, 20 cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJST-PH connector cable, 2-pin, 20 cm long\u003c\/li\u003e \u003cli\u003e2.0 mm pitch connector spacing\u003c\/li\u003e \u003cli\u003eFor battery connections and sensor modules\u003c\/li\u003e \u003cli\u003eGold-plated contacts\u003c\/li\u003e \u003cli\u003eFlat cables, single-sided assembly\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis connector cable connects power supplies and sensor modules with JST-PH connections. The 2.0 mm pitch determines compatibility. The cable fits battery holders, charge controllers, and many sensor boards that use this standard.\u003c\/p\u003e \u003cp\u003eThe cables are flat and assembled on one side, reducing the space required in tight enclosures. Gold-plated contacts reduce contact resistance and connection problems. With a length of 20 cm, the cable can bridge the distance between the power source and the load without creating too much slack inside the enclosure.\u003c\/p\u003e \u003cp\u003eThe cable is suitable for battery packs in mobile robots, sensor modules in wireless measurement systems, and portable IoT devices with removable batteries. The JST-PH standard is also widely used in drones and portable environmental measuring devices.\u003c\/p\u003e \u003cp\u003eReplacement cables of this type are useful for projects when original connections are worn or prototypes need to be assembled. Before purchasing, check the connector orientation of the target board to prevent reverse polarity.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for assembling prototypes and for testing and development purposes. Incorrect polarity can damage connected devices. Check the connection polarity before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST PH2.0mm connector cable - 2 P - 20cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997951107421,"sku":"F23106643","price":0.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-ph20mm-2-p-20cm-funduino-6735442.png?v=1791496044"},{"product_id":"steckkabel-jst-xh2-54mm-3p-mannlich-20cm","title":"JST XH connector cable 2.54 mm - 3-pin, male, 20 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJST-XH connector cable (3-pin, male)\u003c\/li\u003e \u003cli\u003eCable length: 20 cm\u003c\/li\u003e \u003cli\u003eGold-plated contacts\u003c\/li\u003e \u003cli\u003eCan be used individually or as a replacement for standard connections\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe cable connects JST-XH connectors to each other or connects components with XH sockets. The three contacts are gold-plated and housed in a robust plastic housing, enabling secure plug connections without tools.\u003c\/p\u003e \u003cp\u003eWith a length of 20 centimeters, the cable fits most prototypes and hobby projects, for example when connecting batteries to charge controllers, motors to control modules, or sensors in larger assemblies. Several such cables can be used in parallel to separate different circuits.\u003c\/p\u003e \u003cp\u003eThe cable works with all components that use standard XH connectors. Correct polarity is important; incorrectly inserted cables can cause damage. For permanent use, a permanent connection (soldering) should be preferred.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eEnsure correct polarity when connecting the cable to prevent damage to electronic components. This product is intended exclusively for building prototypes and for testing and development purposes. It is not suitable for installation in household electrical circuits.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54mm plug cable - 3 P - Male - 20cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997953139037,"sku":"F23106486","price":1.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-3p-maennlich-20cm-funduino-9433788.png?v=1791495113"},{"product_id":"steckkabel-jst-xh2-54mm-4p-mannlich-20cm","title":"JST XH connector cable 2.54 mm - 4-pin, male, 20 cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnecting cable with JST XH2 connectors, 4-pin\u003c\/li\u003e \u003cli\u003eLength 20 cm\u003c\/li\u003e \u003cli\u003eMale connector to female connector\u003c\/li\u003e \u003cli\u003ePitch 2.54 mm\u003c\/li\u003e \u003cli\u003eSuitable for prototyping and model making\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis connecting cable connects JST-XH2 sockets to compatible connectors and is suitable for safely wiring batteries, rechargeable batteries, and loads in development projects. The male connector fits into pin headers, while the female side accepts a standard connector.\u003c\/p\u003e \u003cp\u003eThe cable measures 20 cm, which is sufficient for connections on perfboards or between assemblies positioned close together. A longer cable is required for greater distances between components. The 2.54 mm pitch corresponds to the standard used for laboratory power supplies and common battery connections.\u003c\/p\u003e \u003cp\u003eThe cable is used to connect LiPo batteries to charging systems, connect power supplies and loads on breadboards, and build portable electronics projects powered by batteries. The insulated connectors reduce the risk of short circuits when working on laboratory setups.\u003c\/p\u003e \u003cp\u003eBoth connected devices or pin headers must have JST-XH2 connections, or the wiring must be adapted accordingly. The cable is intended exclusively for direct voltages up to 48 V.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eWhen connecting batteries and rechargeable batteries, ensure that the polarity is correct. The cable is intended exclusively for prototyping, testing, and development purposes and is not suitable for installation in household electrical circuits.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54mm - 4 P - Male - 20cm connecting cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997953302877,"sku":"F23106438","price":1.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-4p-maennlich-20cm-funduino-9057234.png?v=1791495106"},{"product_id":"steckkabel-jst-ph2-0mm-3-p-20cm","title":"JST PH 3-pin connector cable - 2,0 mm pitch, 20 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJumper cable with 3-pin JST-PH connectors\u003c\/li\u003e \u003cli\u003eCable length: 20 cm\u003c\/li\u003e \u003cli\u003ePitch: 2.0 mm\u003c\/li\u003e \u003cli\u003eSingle-ended\u003c\/li\u003e \u003cli\u003eSuitable for battery connections and sensor connections\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis jumper cable securely connects components with JST-PH connectors. The 2.0 mm pitch standard is commonly used with lithium-polymer batteries, battery holders, and sensor modules. The cable is 20 cm long, making it compact enough for tight installation spaces while still providing sufficient flexibility for layouts in prototypes.\u003c\/p\u003e \u003cp\u003eThe cable connects power sources to power consumers or sensors to controller boards without requiring additional soldering or adapters. The contacts are factory-crimped, so no on-site assembly is required.\u003c\/p\u003e \u003cp\u003eCommon applications include connecting LiPo batteries to charge controllers or switches, connecting temperature sensors to data acquisition modules, and powering GPS modules in portable systems. The JST-PH standard is also used for wiring LED strips or servos.\u003c\/p\u003e \u003cp\u003eFor the cable to fit, the target components must have JST-PH sockets or be capable of being adapted to a PH connector. The contacts gradually wear with frequent connection and disconnection. For more robust permanent-load connections, soldered cables are the better choice.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eBefore first use, check the correct polarity and pin assignment in the circuit diagram. The cable is intended exclusively for building prototypes and for testing and development purposes. If you are unsure about the current-carrying capacity or compatibility with the target components, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST PH2.0mm - 3 P - 20cm jumper cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997958545757,"sku":"F23106638","price":0.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-ph20mm-3-p-20cm-funduino-4637356.png?v=1791495152"},{"product_id":"kabel-mit-jst-xh2-54-stecker-3p-200mm-a-b-26awg-gedreht","title":"JST XH2.54 connecting cable - 3-pin, 200 mm, 26 AWG, A-B twisted","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable with JST-XH2-54 connector, 3-pin\u003c\/li\u003e \u003cli\u003eLength 200 mm\u003c\/li\u003e \u003cli\u003eWire cross-section 26 AWG (approx. 0.12 mm²)\u003c\/li\u003e \u003cli\u003ePre-assembled with a connector on both sides\u003c\/li\u003e \u003cli\u003eColor gray\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis connection cable with JST-XH2-54 connectors connects pre-assembled modules and sensors equipped with this connector type. The 200 mm length allows distances of up to approximately 20 cm between components; extensions are required for greater distances. Identical connectors are fitted on both sides, allowing the cable to be used without modification in daisy-chain connections or between compatible hardware.\u003c\/p\u003e \u003cp\u003eThe three wires provide a supply voltage and ground connection as well as a signal pair. With 26 AWG, the cross-section is suitable for low current consumption of up to approximately 3 amperes; at higher currents, voltage drop across the cable may occur. The JST-XH2 standard provides a secure connection, preventing accidental disconnection, but can be somewhat difficult to remove by hand.\u003c\/p\u003e \u003cp\u003eThe cable is used for connections to battery modules, LED strip controllers, or current sensors in prototypes. In the field assembly of multi-sensor systems, its pre-assembled design saves time compared with soldering. Projects with more than three connection wires require multiple cables or a cable harness.\u003c\/p\u003e \u003cp\u003eIt is important to ensure that the connector type is compatible with the target modules; this connector type is not universal but is limited to JST-XH2-compatible devices. Extensions or polarity reversals must be soldered by hand if the standard cable does not match the required length or pinout.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in household electrical circuits. Consult a qualified electrician before commissioning if higher current ratings or unclear voltage specifications are involved.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x cable with JST XH2.54 connector 3P 200mm A-B 26AWG twisted\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997971161437,"sku":"F23110343","price":0.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kabel-mit-jst-xh254-stecker-3p-200mm-a-b-26awg-gedreht-funduino-7163177.png?v=1791496117"},{"product_id":"steckkabel-jst-xh2-54mm-3p-weiblich-20cm","title":"JST XH connector cable 3-pin - female, 2.54 mm, 20 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eFemale JST-XH connector cable, 3-pin, 20 cm long\u003c\/li\u003e \u003cli\u003e2.54 mm pitch, compatible with standard pin headers and connector headers\u003c\/li\u003e \u003cli\u003ePre-assembled and ready to use without soldering\u003c\/li\u003e \u003cli\u003eCurrent-carrying capacity of up to 3 A per contact\u003c\/li\u003e \u003cli\u003ePolyamide housing with locking mechanism\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis connector cable connects components via a JST-XH connector with female contacts. The 3-pin version, with a length of 20 cm, is suitable for connections between sensor modules, battery packs, and controllers in prototype setups. The standard 2.54 mm pitch enables direct connection to common pin headers and header connectors found on development boards and modules.\u003c\/p\u003e \u003cp\u003eThe JST-XH connector consists of gold-plated contacts in a form-fitting plastic housing with a locking mechanism. This prevents accidental disconnection caused by vibration and ensures reliable contact. Each of the three poles can carry up to 3 A, which is sufficient for most sensor and actuator applications. No calibration or configuration is required; the cable works as soon as it is plugged in.\u003c\/p\u003e \u003cp\u003eThe cable is useful wherever multipole signals or power supplies need to be connected quickly without spending time soldering. Typical applications include powering module batteries, connecting multiple sensors to controllers, or wiring LED strips in prototype projects.\u003c\/p\u003e \u003cp\u003eA compatible female counterpart with a JST-XH pin header on the receiving side is required. For high-current applications exceeding 3 A per wire, thicker wire gauges are required, which are not compatible with this connector.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eImproper wiring or exceeding the specified current ratings may create a fire hazard; check for incorrect polarity. The cable is intended exclusively for prototype assembly and testing and development purposes, not for installation in household electrical circuits. If you are unsure about proper use, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54mm - 3P - Female - 20cm connector cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998123008349,"sku":"F23108702","price":0.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-3p-weiblich-20cm-funduino-4764411.jpg?v=1791495288"},{"product_id":"steckkabel-jst-xh2-54mm-2p-mannlich-20cm","title":"JST XH connector cable 2.54 mm - 2-pin, male, 20 cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJST-XH connector cable, 2-pin, 20 cm length\u003c\/li\u003e \u003cli\u003eMale connector to bare wire ends\u003c\/li\u003e \u003cli\u003eRated current: 3 A per contact\u003c\/li\u003e \u003cli\u003eOperating voltage up to 250 V\u003c\/li\u003e \u003cli\u003eSoldered contacts\u003c\/li\u003e \u003cli\u003eXH design enables daisy-chaining of up to six modules\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis cable with a JST-XH connector connects electronic modules or power sources via a two-pin connection. The male connector is located on one side, while the other side terminates in bare wire ends that can be crimped or soldered for power supply or data exchange with other devices. With a length of 20 cm, the cable can be integrated into compact setups with short cable runs without being too short for larger distances.\u003c\/p\u003e \u003cp\u003eThe connector has male contacts and plugs into the corresponding socket on a module. The cable is designed for operation at voltages up to 250 V and currents up to 3 A per contact. If the other side is already fitted with a Fritz connector, soldering is not required; if open wiring is present, the wire ends are connected to the target power source or module. The soldered contacts provide a secure connection without oxidation over extended periods.\u003c\/p\u003e \u003cp\u003eApplications include building sensor circuits, powering small motors via control boards, and flexibly connecting battery taps to prototype boards. Particularly in battery-powered projects, the pluggable system enables quick switching between different power sources or loads without having to rewire the setup.\u003c\/p\u003e \u003cp\u003eThe cable requires a suitably rated power supply or a module with a JST-XH socket on the other side. The wire cross-sections must match the intended current; heat generation must be taken into account at higher power levels. Anyone working with higher currents or voltages should check the load capacity of the soldered contacts before commissioning.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis cable is intended exclusively for building prototypes and for testing and development purposes, not for integration into household electrical circuits. High-current applications require careful sizing and inspection; if there is any doubt about the load capacity, consult a qualified electrician before commissioning. Check the polarity before connecting to prevent damage to sensitive devices.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54mm - 2P - Male - 20cm connector cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998149091677,"sku":"F23108541","price":0.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-2p-maennlich-20cm-funduino-5426903.png?v=1791495301"},{"product_id":"steckkabel-jst-xh2-54mm-2p-mannlich-10cm","title":"JST XH connector cable 2.54 mm - 2-pin, male, 10 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJST-XH2 connector cable, 2-pin, 10 cm length\u003c\/li\u003e \u003cli\u003eMale connector, 2.54 mm contact spacing\u003c\/li\u003e \u003cli\u003eGold-plated contacts\u003c\/li\u003e \u003cli\u003eFor battery connections and power distribution in prototypes\u003c\/li\u003e \u003cli\u003eCompatible with common LiPo batteries and chargers\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe cable with a JST-XH2 connector safely connects batteries, chargers, and power distribution boards. The male connector with 2.54 mm contact spacing fits the female sockets on LiPo batteries and commercial chargers. The 10 cm length provides enough flexibility to separate the battery and controller without placing the boards directly on top of each other.\u003c\/p\u003e \u003cp\u003eThe gold-plated contacts ensure reliable power connections without oxidation. The JST-XH2 standard is widely used in model making and robotics, making the connectors and sockets easy to interchange. The cable is suitable for operating voltages up to 6 V.\u003c\/p\u003e \u003cp\u003eThe cable can be used in drone setups, small battery-powered robotic vehicles, and development boards where the battery and electronics need to be separated. The standardized connector is also advantageous for quickly switching between different battery modules. In everyday project work, this saves soldering and enables easy battery replacement.\u003c\/p\u003e \u003cp\u003eWhen connecting the cable directly to chargers, the polarity must be correct. Obtaining additional cables or adapters is left to the project when multiple power distribution points are located far apart.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eCaution: Reversing the polarity will damage the battery and connected devices. The cable is intended exclusively for building prototypes and for testing and development purposes, and is not intended for installation in household electrical circuits.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54mm cable - 2P - Male - 10cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998246183261,"sku":"F23110287","price":0.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-2p-maennlich-10cm-funduino-6387592.png?v=1791495446"},{"product_id":"batterieclip-9v-block-zu-jst-xh2-54-umgekehrte-polung","title":"9 V battery clip to JST XH2.54 - 18 cm, reversed polarity","description":"\u003cp\u003e\u003cstrong\u003eBattery clip for 9V block batteries.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConnection: 9V block battery, open\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eCable length: approx. 18 cm\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eMaterial: Synthetic leather, metal\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eColor: Black, Red\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003ewith I-shape (cable on the side)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCaution: reverse polarity\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1x 9V battery clip for 9V block battery to JST XH2.54 - \u003cstrong\u003ereverse polarity\u003c\/strong\u003e\n\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66043556790621,"sku":"F25111246","price":1.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/batterieclip-9v-block-zu-jst-xh254-umgekehrte-polung-funduino-3631583.jpg?v=1791482555"},{"product_id":"adapterkabel-10cm-dean-mannlich-zu-jst-bec-weiblich","title":"Dean to JST BEC adapter cable - 10 cm, male-female","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable for connecting Dean plugs to JST-BEC sockets\u003c\/li\u003e \u003cli\u003eLength: 10 cm\u003c\/li\u003e \u003cli\u003eMale Dean plug to female JST-BEC plug\u003c\/li\u003e \u003cli\u003eEnables batteries or power supplies with Dean plugs to be connected to devices with JST-BEC sockets\u003c\/li\u003e \u003cli\u003eCopper conductors with insulation jacket\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis adapter cable connects power sources with Dean plugs to devices equipped with JST-BEC sockets. The 10 cm length allows flexible routing without unnecessary cable length and fits into confined assemblies. The cable reliably transfers power without requiring batteries or power supplies to be resoldered.\u003c\/p\u003e \u003cp\u003eThe adapter cable is suitable for switching between battery systems and chargers with different connector specifications, for example when existing batteries with Dean connectors need to be connected to RC vehicles or drones with JST-BEC inputs. The cable also eliminates the need for repeated resoldering when testing different power sources with a device.\u003c\/p\u003e \u003cp\u003eFor operation and storage, the connectors should be kept clean and dry. The cable's current-carrying capacity depends on the conductor cross-section, which is not specified in the product data. Before using it with high-current batteries or power supplies, check the cable's actual current-carrying capacity.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eWhen working with power supplies or chargers connected to mains voltage, all work must be carried out by a qualified electrician. This cable is intended exclusively for building prototypes and for testing and development purposes. Before first use, rule out reverse polarity and compare the conductor cross-section with the planned current load.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 10 cm adapter cable - male Dean to female JST\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66044800205149,"sku":"F23107540","price":2.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/adapterkabel-10cm-dean-maennlich-zu-jst-bec-weiblich-funduino-7967981.jpg?v=1791488149"},{"product_id":"3p-jst-xh-2-54-mm-buchse-3-polig-gerade","title":"3-pin JST-XH socket - 2.54 mm pitch, straight, 6 V \/ 3 A","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e3-pin connector, 2.54 mm pitch\u003c\/li\u003e \u003cli\u003eJST-XH standard with female housing\u003c\/li\u003e \u003cli\u003eStraight design for PCB mounting\u003c\/li\u003e \u003cli\u003eRated voltage: 6 V\u003c\/li\u003e \u003cli\u003eCurrent-carrying capacity: 3 A per contact\u003c\/li\u003e \u003cli\u003eGold-plated contacts for reliable connections\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis 3-pin connector socket follows the JST-XH standard and is soldered onto printed circuit boards. The 2.54 mm pitch corresponds to the common pin spacing used on microcontroller boards and sensor elements, ensuring compatibility with common development platforms.\u003c\/p\u003e \u003cp\u003eThe straight design is suitable for space-saving PCB layouts, particularly when the plug and socket are intended to be positioned on the same plane. The gold-plated contacts provide reliable connections by minimizing corrosion and ensuring stable connections even under vibration.\u003c\/p\u003e \u003cp\u003eTypical applications include powering sensor modules, connecting battery packs to control boards, or transmitting signals between separate components in prototypes and test setups. Particularly in portable devices or robotics projects, this connector enables quick mechanical disconnection without tools.\u003c\/p\u003e \u003cp\u003eWith a maximum permissible operating voltage of 6 V, it is not suitable for use with high-voltage systems or standard household electrical circuits. The load per contact is 3 A; at higher currents, the number of pins used must be increased accordingly.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis connector is intended exclusively for prototypes and testing and development purposes. It is not suitable for installation in household electrical circuits. Work on or in the immediate vicinity of electrical installations must be performed by a qualified electrician; consult a professional before commissioning if in doubt.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1× JST XH 2.54 mm pin header, 3-pin, straight\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045114122589,"sku":"F23108046","price":0.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/3p-jst-xh-254-mm-buchse-3-polig-gerade-funduino-7999311.png?v=1791488809"},{"product_id":"adapterkabel-10cm-dean-weiblich-zu-jst-bec-mannlich","title":"Dean to JST-BEC adapter cable - 10 cm, female to male","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable from Dean connector (female) to JST-BEC connector (male)\u003c\/li\u003e \u003cli\u003eLength: 10 cm\u003c\/li\u003e \u003cli\u003eCombines two different connector systems without soldering\u003c\/li\u003e \u003cli\u003eFor batteries and power supply in model building and drones\u003c\/li\u003e \u003cli\u003eHigh-quality contacts for reliable power transmission\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis adapter cable connects Dean and JST-BEC connectors directly, eliminating the need for soldering. With a length of ten centimeters, it fits into confined installation spaces where longer cable runs are not possible.\u003c\/p\u003e \u003cp\u003eThe cable transfers battery voltages between power sources and consumers that use different connector systems. The contacts are designed for high current loads and reduce contact resistance, minimizing voltage losses.\u003c\/p\u003e \u003cp\u003eIn model aviation, for example, the cable allows a Dean battery to be connected to a speed controller or charging system with a JST-BEC socket. Similarly, in drone building, it enables quick switching between different power distribution modules. It is also used in stationary charging stations when connectors from different generations need to be connected.\u003c\/p\u003e \u003cp\u003eThe cable is preassembled, so no soldering iron is required. However, the polarity of both connectors must be checked before use; an incorrect connection can damage the connected electronics. The maximum current depends on the batteries and consumers used.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eBefore commissioning, make sure that the polarity of the adapter cable matches your power source and consumer; devices connected with reversed polarity will be damaged. The cable is intended exclusively for building prototypes and for testing and development purposes, and is not suitable for use in household power circuits.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 10 cm adapter cable - Dean female to JST male\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045230874973,"sku":"F23107735","price":2.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/adapterkabel-10cm-dean-weiblich-zu-jst-bec-maennlich-funduino-1724732.jpg?v=1791488545"},{"product_id":"buchse-mit-kabel-jst-hy2-0mm-2p-20cm-weiblich","title":"JST HY2.0 socket with cable - 2-pin, female, 20 cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnector socket with 20 cm cable, JST-HY standard, 2-pin\u003c\/li\u003e \u003cli\u003eFemale socket housing, 2.0 mm pitch\u003c\/li\u003e \u003cli\u003ePre-assembled with flat connectors in the plug\u003c\/li\u003e \u003cli\u003eFor use in prototyping and model making\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis connector socket with a pre-assembled cable is suitable for quick electrical connections in electronics projects and model making. The female housing compliant with the JST-HY standard fits the widely used male counterparts in this series. The 20 cm cable allows flexible distances between power supplies, control modules, and consumers without additional connection cables.\u003c\/p\u003e \u003cp\u003eThe 2.0 mm pitch is a common standard in hobby electronics. The pre-assembled flat connectors eliminate soldering and reduce potential sources of error when assembling prototypes. This allows a circuit to be brought into functional testing more quickly.\u003c\/p\u003e \u003cp\u003eTypical applications include powering sensors in measurement setups, connections between controllers and expansion modules, or wiring battery packs in remote-controlled models. The plug-and-socket combination is particularly practical for modules that need to be changed frequently.\u003c\/p\u003e \u003cp\u003eFor applications involving higher currents or critical safety requirements, check whether the contact surfaces of this size are sufficient. The cable itself has no marking for the positive and negative conductors; labeling or color coding should be added during installation to prevent mix-ups.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis connection module is intended exclusively for assembling prototypes and for testing and development purposes. It is not intended for installation in household mains circuits. When connecting power sources, ensure correct polarity and avoid short circuits; if in doubt, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST HY2.0mm 2P plug cable - 20cm - Female\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045248405853,"sku":"F23109002","price":0.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/buchse-mit-kabel-jst-hy20mm-2p-20cm-weiblich-funduino-5785743.jpg?v=1791488583"},{"product_id":"grove-abzweigkabel-y-adapter-5er-set","title":"Grove branch cable Y adapter - set of 5, for I2C modules","description":"\u003ch2\u003eI2C Grove Connection Cable\u003c\/h2\u003e \u003cp\u003eUse this cable to connect two I2C Grove modules to an I2C Grove connector. This cable is compatible with all I2C Grove modules. It is very useful when you need to connect more than one I2C device to your Grove system.\u003c\/p\u003e \u003ch3\u003eTechnical Details\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDimensions 140 mm x 90 mm x 11 mm\u003c\/li\u003e \u003cli\u003eWeight 49.5g\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat is Grove?\u003c\/h2\u003e \u003cp\u003eGrove makes connecting and experimenting easier and simplifies the prototyping process. No jumpers or soldering are required. More than 300 Grove modules have been developed, covering a wide range of applications and meeting a variety of requirements. Not only the hardware but also the software is open source. \u003c\/p\u003e \u003cp\u003eWe offer various Grove Shields to enable connections to the Grove system with a range of microcontrollers. \u003c\/p\u003e \u003ch3\u003eScope of Delivery\u003c\/h3\u003e \u003cp\u003eGrove - Branch Cable (5-pack)\u003c\/p\u003e","brand":"Seeedstudio","offers":[{"title":"Default Title","offer_id":66045435773277,"sku":"F23107256","price":3.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/grove-abzweigkabel-y-adapter-5er-set-funduino-6216455.jpg?v=1791489083"},{"product_id":"steckkabel-hy2-0-4p-auf-offenes-ende-50cm-grove-kompatibel","title":"HY2.0-4P connecting cable - bare end, 50 cm, Grove-compatible","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable for Grove modules, HY2.0 connector to bare end\u003c\/li\u003e \u003cli\u003eFour-core cable, 50 cm long\u003c\/li\u003e \u003cli\u003eCross-sectional area of 0.5 mm² per core\u003c\/li\u003e \u003cli\u003eEnables direct wiring to microcontrollers or terminal blocks\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis connection cable connects Grove-compatible sensors and modules to microcontroller boards or other circuits. The standardized HY2.0 connector is located on one side, while the other side is unterminated and can be soldered, clamped, or connected to pins directly.\u003c\/p\u003e \u003cp\u003eThe four cores enable connections for I2C, SPI, serial interfaces, or analog signals, depending on the application. With a length of 50 cm, spatially separated components can be connected without compromising signal quality. The 0.5 mm² cross-sectional area is suitable for low-power applications with moderate currents of up to approximately 2 A per core.\u003c\/p\u003e \u003cp\u003eTypical applications include prototyping setups in which ready-made Grove sensors are combined with non-Grove components, or the expansion of existing wiring. The open end is also helpful when modifying experimental setups where the connectors do not fit properly, allowing for flexible adaptation.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for prototyping, testing, and development purposes and is not suitable for installation in household electrical circuits. Polarity must be observed during wiring to prevent damage to connected modules. Work on or near electrical installations is reserved for qualified electricians; if you are unsure, consult a qualified electrician before commissioning.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045590569309,"sku":"F23109282","price":1.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-hy20-4p-auf-offenes-ende-50cm-grove-kompatibel-funduino-9159427.png?v=1791489313"},{"product_id":"jst-sm2-54-kabelset-4p-stecker-und-fassung","title":"JST-SM 4-pin cable set - plug and socket, 2.54 mm, 3 A","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDC connector pair, JST-SM size with four contacts\u003c\/li\u003e \u003cli\u003ePlug and socket with gold-plated contacts\u003c\/li\u003e \u003cli\u003eOperating range up to 60 °C\u003c\/li\u003e \u003cli\u003eRated current of 3 A per contact\u003c\/li\u003e \u003cli\u003eCrimped design without soldering\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis cable set consisting of a plug and socket connects power supplies or signal lines without soldering. The four gold-plated contacts on each side can handle up to 3 A each and are suitable for power supplies, battery boxes, and modular project setups.\u003c\/p\u003e \u003cp\u003eThe contacts are housed in gold-plated sockets and are crimped onto the wires. This provides secure connections without heat generation and with consistent contact quality. The design is approved for operating voltages of up to approximately 48 V; the operating temperature range extends up to 60 °C.\u003c\/p\u003e \u003cp\u003eThe set is practical for frequently disconnected connections, power supplies for small sensors, motor controls, or battery compartments that are frequently plugged and unplugged. When wiring multiple modules in a project, each preassembled plug also saves connection work.\u003c\/p\u003e \u003cp\u003eSuitable tools are required for crimping, and all voltages involved should be in the low-voltage range. The contacts cannot withstand excessive mechanical force when being plugged in.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis cable set is intended exclusively for building prototypes and for testing and development purposes. It is not intended for installation in household electrical circuits. For applications involving higher voltages or currents than specified in the technical data, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x cable with SM2.54 plug (4 pins)\u003c\/li\u003e \u003cli\u003e1x cable with SM2.54 socket (4 pins)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045612556637,"sku":"F23107578","price":1.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/jst-sm254-kabelset-4p-stecker-und-fassung-funduino-9724733.jpg?v=1791490270"},{"product_id":"steckkabel-4p-20cm-hy2-0-auf-hy2-0","title":"HY2.0 connector cable - 4-pin, 20 cm, 0.5 mm²","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable with 4-pin HY2.0 connectors on both ends\u003c\/li\u003e \u003cli\u003eLength: 20 cm\u003c\/li\u003e \u003cli\u003eFor connecting modules with HY2.0 connectors\u003c\/li\u003e \u003cli\u003eConductor cross-section: 0.5 mm²\u003c\/li\u003e \u003cli\u003eMolded connectors with locking mechanism\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis cable connects two modules or components with HY2.0 connectors directly to each other. The 20 cm length allows flexible arrangements in compact setups and is also sufficient for frequently repeated modifications.\u003c\/p\u003e \u003cp\u003eThe four 0.5 mm² conductors transmit data or power, depending on the connector pinout and connected module. Since both ends are identical, the cable can be used interchangeably between compatible connectors. The connectors are molded and locking, ensuring a secure connection during repeated use.\u003c\/p\u003e \u003cp\u003eThe cable is used for connecting sensors and actuators to controller boards, for stacking expansion modules, or for extending existing wiring within project setups.\u003c\/p\u003e \u003cp\u003eCompatibility is limited to components with the precisely matching HY2.0 connector. Check the pinout of the respective connected module before making the connection.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for prototyping and testing and development purposes. Work on or near electrical installations must be carried out by qualified electricians. If you are unsure about the correct pinout of the connected modules, consult a qualified electrician before commissioning.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045612917085,"sku":"F23107988","price":1.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-4p-20cm-hy20-auf-hy20-funduino-2230732.png?v=1791490278"},{"product_id":"adapterkabel-10cm-jst-bec-weiblich-zu-xt60-mannlich","title":"JST-BEC to XT60 adapter cable - 10 cm, female to male","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable, 10 cm long\u003c\/li\u003e \u003cli\u003eFemale JST-BEC connector to male XT60 connector\u003c\/li\u003e \u003cli\u003eConnects batteries with a BEC connector to devices with an XT60 input\u003c\/li\u003e \u003cli\u003eReverse polarity protection through connector geometry\u003c\/li\u003e \u003cli\u003eSuitable for LiPo and LiFePo batteries\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe adapter cable bridges the incompatibility between two common battery connector standards. The JST-BEC connector is on the female side and accepts batteries equipped with this connector, while the XT60 connector on the male side connects to the power distribution system or device. The 10 cm cable provides just enough flexibility to allow the battery pack and load to be arranged in a space-saving manner when necessary.\u003c\/p\u003e \u003cp\u003eThe design uses the geometric precision of both connector types; reverse polarity is effectively prevented by their different shapes. The cable itself contains no electronics; it only transfers power. If you have batteries with a BEC connector but want to operate a device with an XT60 input, this cable eliminates the need for a separate adapter cable in the opposite direction.\u003c\/p\u003e \u003cp\u003eThese cables are typically used in model aviation, multirotor applications, and electric vehicle projects. In laboratory setups, the adapter cable also eliminates the need to solder a transition between standards when pre-assembled components with different connector histories are combined. It is important to connect only batteries with sufficient capacity and the appropriate number of cells to avoid overloading the cable.\u003c\/p\u003e \u003cp\u003eThe cable is designed for LiPo and LiFePo batteries. Its current-carrying capacity depends on the wire gauge. Before purchasing, check whether the current drawn by the intended battery is within the cable specifications to prevent overloading and resulting damage.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eLithium-polymer batteries require proper handling and must not be damaged, excessively heated, or charged incorrectly. The cable is intended exclusively for building prototypes and for testing and development purposes; it is not designed for permanent integration into devices. Work on or near electrical installations must be carried out by qualified electricians. If you are uncertain about the correct wiring or current-carrying capacity, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 10 cm adapter cable - female JST BEC to male XT60\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045614260573,"sku":"F23107723","price":2.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/adapterkabel-10cm-jst-bec-weiblich-zu-xt60-maennlich-funduino-2651279.jpg?v=1791489579"},{"product_id":"steckkabel-jst-xh2-54-zu-5p-dupont-20cm-male-female","title":"JST-XH 2.54 mm to Dupont 5P adapter cable - 20 cm, male\/female","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable with a JST-XH2 connector (54-pin) on one side and a Dupont connector (5-pin) on the other\u003c\/li\u003e \u003cli\u003eLength: 20 cm\u003c\/li\u003e \u003cli\u003eMale and female contacts on different sides\u003c\/li\u003e \u003cli\u003eConnects sensors and modules with different connector standards\u003c\/li\u003e \u003cli\u003eFlat ribbon cable design\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis adapter cable connects assemblies with different connector types. One side has a JST-XH2 connector with 54 positions, while the other has a Dupont connector with 5 positions. The male and female contacts are distributed across different sides, so the cable only fits with a specific polarity.\u003c\/p\u003e \u003cp\u003eThe 20-centimeter length is sufficient for tight spaces in project setups and enables flexible component placement. The flat ribbon cable format takes up little space and is less likely to become tangled.\u003c\/p\u003e \u003cp\u003eIt is intended for connections between special sensors or battery packs with the JST-XH2 standard and common microcontroller boards or expansion modules that use Dupont connectors. A typical scenario is connecting a multicell battery to a balance charger or control electronics with Dupont sockets.\u003c\/p\u003e \u003cp\u003eA prerequisite is that both devices actually use these two connector types; otherwise, the cable will not fit. Another adapter cable is required for other connector types or pin-count combinations.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe cable is intended only for prototype construction and testing and development purposes. Make sure to connect the cable with the correct polarity to prevent damage to the connected devices. Work on or near electrical installations is reserved for qualified electricians; if you are unsure about compatibility, consult a qualified electrician before connecting.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54 to 4P Dupont cable (20cm) male\/female\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045637067101,"sku":"F23108000","price":1.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254-zu-5p-dupont-20cm-malefemale-funduino-5665840.jpg?v=1791490819"},{"product_id":"adapterkabel-10cm-jst-bec-mannlich-zu-xt60-weiblich","title":"JST BEC to XT60 adapter cable - 10 cm, male to female","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable for connecting JST-BEC plugs to XT60 sockets\u003c\/li\u003e \u003cli\u003eLength: 10 cm\u003c\/li\u003e \u003cli\u003eMale JST-BEC plug to female XT60 socket\u003c\/li\u003e \u003cli\u003eEnables the use of BEC-equipped power supplies with XT60 connections\u003c\/li\u003e \u003cli\u003eColor-coded red and black wires\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis adapter cable connects power supplies with a JST-BEC plug to devices with XT60 sockets. The two connector types are not compatible, so the cable serves as an interface and prevents overvoltage or reverse polarity when connecting directly. At ten centimeters long, the cable is compact enough for tight installation spaces while still providing sufficient slack for routing inside devices.\u003c\/p\u003e \u003cp\u003eThe cable is plugged between a BEC-equipped power source and the consumer's XT60 connection. Connect the red wire to red and the black wire to black; the color coding prevents mix-ups. The contacts are soldered rather than crimped, ensuring reliable contact over many connection cycles.\u003c\/p\u003e \u003cp\u003eThe adapter cable is typically used in drone, RC model, and battery-powered applications where different chargers and power supplies with various connector types need to be connected. It significantly simplifies equipment setups when individual components do not need to be rewired to connect them.\u003c\/p\u003e \u003cp\u003eThe cable is designed exclusively for direct current and low voltages up to the rated load limits specified for the connector types. Longer cable runs or significantly higher current flows require thicker wires to prevent voltage drops.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eIncorrectly polarized or damaged connectors can cause short circuits and present a fire hazard. Check the polarity before each connection. This cable is intended exclusively for building prototypes and for testing and development purposes; it is not intended for installation in household electrical circuits. If connectors or wires are damaged, consult a qualified electrician before use.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 10 cm adapter cable - female JST BEC to male XT60\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045641556317,"sku":"F23107623","price":2.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/adapterkabel-10cm-jst-bec-maennlich-zu-xt60-weiblich-funduino-1205405.jpg?v=1791489248"},{"product_id":"master-adapter-usb-c-buchse-auf-2p-stecker-mx1-25-ph2-0-xh2-54-dupont","title":"USB-C adapter - socket to 2-pin plug, various connector types","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter with USB-C socket and two-pin MX1.25 connector\u003c\/li\u003e \u003cli\u003eConnection between USB-C devices and MX1.25 connections\u003c\/li\u003e \u003cli\u003eAvailable in several versions\u003c\/li\u003e \u003cli\u003eCompact form factor for confined installation spaces\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis adapter connects USB-C sockets to the two-pin MX1.25 PH2.0-X plug. The interface enables devices or modules with an MX1.25 connection to be connected to controller boards and power sources with a USB-C output.\u003c\/p\u003e \u003cp\u003eThe adapter transfers voltages and signals via the two wires of the MX1.25 plug. If you want to connect sensors or actuators with an MX1.25 connection to modern USB-C boards, it eliminates the need for soldering work and individual single-core cables. Typical applications include powering small modules via USB-C power supplies, connecting JST-PH-compatible sensor modules to USB-C computers, and quickly building prototypes with pre-connected wires.\u003c\/p\u003e \u003cp\u003eDepending on the application, the pin assignment of the two wires must be matched to the requirements of the target device. The adapter is available in several variants to cover different pin configurations. Check the correct polarity before operation to prevent damage.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eEnsure correct polarity when connecting the adapter to prevent damage to connected modules. The adapter is intended exclusively for building prototypes and for testing and development purposes, and is not intended for use in household electrical circuits.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 16 cm adapter cable from USB-C socket to 2P plug, variant as selected\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"MX1.25","offer_id":66045642801501,"sku":"F23107512","price":1.86,"currency_code":"EUR","in_stock":true},{"title":"PH2.0","offer_id":66046581080413,"sku":"F23107490","price":1.86,"currency_code":"EUR","in_stock":true},{"title":"XH2.54","offer_id":66046453383517,"sku":"F23107645","price":1.86,"currency_code":"EUR","in_stock":true},{"title":"Dupont","offer_id":66046428774749,"sku":"F23107613","price":1.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-adapter-usb-c-buchse-auf-2p-stecker-mx125-ph20-xh254-dupont-funduino-5789840.jpg?v=1791499610"},{"product_id":"steckkabel-4p-50cm-hy2-0-auf-hy2-0-grove-kompatibel","title":"HY2.0 connecting cable - 4-pin, 50 cm, Grove-compatible","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable for Grove-compatible modules\u003c\/li\u003e \u003cli\u003e4-pin connection, with an HY2.0 connector on each end\u003c\/li\u003e \u003cli\u003eCable length: 50 cm\u003c\/li\u003e \u003cli\u003eStandardized pinout for data and power supply\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis connection cable connects Grove-compatible modules via standardized 4-pin connectors. The identical HY2.0 connectors on both ends fit all common Grove slots and enable fast, secure connections without soldering.\u003c\/p\u003e \u003cp\u003eThe cable carries two data lines and two power supply lines. This allows sensors, actuators, and controllers to be combined flexibly without additional wiring or level shifters. The 50 cm length easily bridges distances between standard prototyping boards.\u003c\/p\u003e \u003cp\u003eIt can be used in sensor networks, for example to connect temperature, humidity, or distance sensors to a central module, as well as for actuator control and expansion modules in prototyping projects. The cable also significantly simplifies mechanical assembly when arranging multiple boards modularly in a spatial configuration.\u003c\/p\u003e \u003cp\u003eThe cable is designed exclusively for Grove slot connections. Separate cable sections are required for longer distances or free wiring.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for building prototypes and for testing and development purposes; it is not suitable for connection to mains voltage. If the cable is damaged, safe operation can no longer be guaranteed, and the product should no longer be used.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045645521245,"sku":"F23107660","price":1.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-4p-50cm-hy20-auf-hy20-grove-kompatibel-funduino-2698380.png?v=1791491585"},{"product_id":"steckkabel-jst-gh1-25-4p-stecker-mannlich-10cm","title":"JST GH1.25 connection cable - 4-pin, male, 10 cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJST-GH connector cable, 4-pin, 10 cm length\u003c\/li\u003e \u003cli\u003eMale connector, contacts on both sides\u003c\/li\u003e \u003cli\u003eOperating voltage up to 6 V\u003c\/li\u003e \u003cli\u003eCurrent capacity of 2 A per conductor\u003c\/li\u003e \u003cli\u003eFine-stranded wire, 0.5 mm², for flexible routing\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis connection cable with a JST-GH connector reliably connects sensors, actuators, and control modules. The 4-pin connector is widely used specifically in robotics and portable devices, where weight and installation space are important.\u003c\/p\u003e \u003cp\u003eThe cable terminates in a connector on both sides, allowing it to serve directly as an interface between two modules or to be connected to unoccupied pin headers. The current capacity of 2 A per conductor is sufficient for sensor signals and low-power actuators, but not for high-power consumers. The cable is used to connect battery management systems, motor controllers in smaller robots, or sensor chains in portable data loggers.\u003c\/p\u003e \u003cp\u003eThe operating voltage of up to 6 V limits use to 5 V logic and similar low-voltage systems. Other connector types are required for higher voltages or currents. The cable requires no additional components and is ready for immediate use.\u003c\/p\u003e \u003ch3\u003eSafety note\u003c\/h3\u003e \u003cp\u003eThe cable must not be installed in household power systems. It is intended exclusively for prototypes, testing, and development purposes. A qualified electrician is required when working on or near electrical installations.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST GH1.25mm - 4 P - Male - 10cm connector cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045649092957,"sku":"F23107696","price":1.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-gh125-4p-stecker-maennlich-10cm-funduino-5800643.jpg?v=1791492021"},{"product_id":"master-mini-5264-steckkabel-molex-mini-spox-5264-10cm-2-54mm-26awg","title":"Molex Mini-SPOX 5264 pre-crimped cable - 10 cm, 2.5 mm pitch, 26 AWG, 2- to 12-pin","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnecting cable with Molex Mini-SPOX connector, 10 cm length\u003c\/li\u003e \u003cli\u003e2.5 mm pitch\u003c\/li\u003e \u003cli\u003eAvailable in 33 different versions\u003c\/li\u003e \u003cli\u003eFor connecting assemblies with compatible connector sockets\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe connecting cable with Molex Mini-SPOX connector quickly and reliably connects circuit boards and modules with a matching connector. The 2.5 mm pitch corresponds to the widely used Mini-SPOX standard and ensures compatibility with numerous development boards and sensors.\u003c\/p\u003e \u003cp\u003eThe compact design makes the cable ideal for confined installations in prototypes and test setups. At 10 cm in length, it fits into most handles and experimental circuits without taking up too much space. Available in several versions, the cable covers different connector and pinout configurations.\u003c\/p\u003e \u003cp\u003eThe cable is used to connect sensor modules to mainboards, build modular measurement systems, or prototype embedded systems where plug connections enable manual reconfiguration. It also simplifies the replacement of components in compact robotics projects.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis cable is intended exclusively for building prototypes and for testing and development purposes, not for installation in household electrical circuits. Work on or near electrical installations must be carried out by a qualified electrician; if anything is unclear, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Molex Mini-SPOX 5264 connecting cable - 10cm, 2.54mm, 26AWG - version as selected\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"2-pole \/ Single Head","offer_id":66045651550557,"sku":"F23107526","price":0.66,"currency_code":"EUR","in_stock":true},{"title":"2-pole \/ Double Head A","offer_id":66045729374557,"sku":"F23107543","price":0.8,"currency_code":"EUR","in_stock":true},{"title":"2-pole \/ Double Head B","offer_id":66045729440093,"sku":"F23107665","price":0.8,"currency_code":"EUR","in_stock":true},{"title":"4-pin \/ Single Head","offer_id":66045751624029,"sku":"F23107673","price":0.86,"currency_code":"EUR","in_stock":true},{"title":"4-pin \/ Double Head A","offer_id":66045728948573,"sku":"F23107529","price":1.03,"currency_code":"EUR","in_stock":true},{"title":"4-pin \/ Double Head B","offer_id":66045764665693,"sku":"F23107617","price":1.03,"currency_code":"EUR","in_stock":true},{"title":"5-pin \/ Single Head","offer_id":66045757587805,"sku":"F23105689","price":0.95,"currency_code":"EUR","in_stock":true},{"title":"5-pin \/ Double Head A","offer_id":66045729243485,"sku":"F23107620","price":1.13,"currency_code":"EUR","in_stock":true},{"title":"5-pin \/ Double Head B","offer_id":66045729538397,"sku":"F23107608","price":1.13,"currency_code":"EUR","in_stock":true},{"title":"6-pin \/ Single Head","offer_id":66045772759389,"sku":"F23105690","price":1.04,"currency_code":"EUR","in_stock":true},{"title":"6-pin \/ Double Head A","offer_id":66045729177949,"sku":"F23107661","price":1.22,"currency_code":"EUR","in_stock":true},{"title":"6-pin \/ Double Head B","offer_id":66045729669469,"sku":"F23107587","price":1.22,"currency_code":"EUR","in_stock":true},{"title":"8-pin \/ Single Head","offer_id":66045729571165,"sku":"F23107850","price":1.13,"currency_code":"EUR","in_stock":true},{"title":"8-pin \/ Double Head A","offer_id":66045730062685,"sku":"F23107648","price":1.35,"currency_code":"EUR","in_stock":true},{"title":"8-pin \/ Double Head B","offer_id":66045729964381,"sku":"F23107854","price":1.35,"currency_code":"EUR","in_stock":true},{"title":"10-pin \/ Single Head","offer_id":66045733175645,"sku":"F23107629","price":1.25,"currency_code":"EUR","in_stock":true},{"title":"10-pin \/ Double Head A","offer_id":66045730488669,"sku":"F23107851","price":1.49,"currency_code":"EUR","in_stock":true},{"title":"10-pin \/ Double Head B","offer_id":66045733077341,"sku":"F23107857","price":1.49,"currency_code":"EUR","in_stock":true},{"title":"12-pin \/ Single Head","offer_id":66045733110109,"sku":"F23107856","price":0.66,"currency_code":"EUR","in_stock":true},{"title":"12-pin \/ Double Head A","offer_id":66045733732701,"sku":"F23107871","price":1.63,"currency_code":"EUR","in_stock":true},{"title":"12-pin \/ Double Head B","offer_id":66045734060381,"sku":"F23107849","price":1.63,"currency_code":"EUR","in_stock":true},{"title":"3-pin \/ Single Head","offer_id":66045776101725,"sku":"F23107494","price":0.74,"currency_code":"EUR","in_stock":true},{"title":"3-pin \/ Double Head A","offer_id":66045771874653,"sku":"F23107672","price":0.9,"currency_code":"EUR","in_stock":true},{"title":"3-pin \/ Double Head B","offer_id":66045779902813,"sku":"F23107531","price":0.9,"currency_code":"EUR","in_stock":true},{"title":"9-pin \/ Single Head","offer_id":66045729997149,"sku":"F23107588","price":1.19,"currency_code":"EUR","in_stock":true},{"title":"9-pin \/ Double Head A","offer_id":66045730029917,"sku":"F23107640","price":1.42,"currency_code":"EUR","in_stock":true},{"title":"9-pin \/ Double Head B","offer_id":66045730455901,"sku":"F23107868","price":1.42,"currency_code":"EUR","in_stock":true},{"title":"11-pin \/ Single Head","offer_id":66045730357597,"sku":"F23107853","price":1.31,"currency_code":"EUR","in_stock":true},{"title":"11-pin \/ Double Head A","offer_id":66045733241181,"sku":"F23107870","price":1.57,"currency_code":"EUR","in_stock":true},{"title":"11-pin \/ Double Head B","offer_id":66045732749661,"sku":"F23107852","price":1.57,"currency_code":"EUR","in_stock":true},{"title":"7-pin \/ Single Head","offer_id":66045757096285,"sku":"F23107668","price":1.1,"currency_code":"EUR","in_stock":true},{"title":"7-pin \/ Double Head A","offer_id":66045752607069,"sku":"F23107855","price":1.31,"currency_code":"EUR","in_stock":true},{"title":"7-pin \/ Double Head B","offer_id":66045757653341,"sku":"F23107848","price":1.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-mini-5264-steckkabel-molex-mini-spox-5264-10cm-254mm-26awg-funduino-2243280.jpg?v=1791486377"},{"product_id":"grove-universal-kabel-4-pin-30cm-5er-set-buckled-mit-clip","title":"Grove universal cable 4-pin - 30 cm, set of 5, with clip","description":"\u003ch2\u003e4-pin universal cable for the Grove system\u003c\/h2\u003e \u003cp\u003eCompared to the Electronic Brick system, the Grove system uses only one cable type (the Electronic Brick system uses 4). These cables are compatible with all modules included in the Grove system.\u003c\/p\u003e \u003cp\u003eThis package contains 5 cables.\u003c\/p\u003e \u003ch3\u003eWhat is Grove?\u003c\/h3\u003e \u003cp\u003eGrove makes connecting and experimenting easier and simplifies the prototyping process. No jumpers or soldering are required. More than 300 Grove modules have been developed, covering a wide range of applications and meeting a variety of requirements. Not only the hardware but also the software is open source. We offer various Grove shields to enable connections to the Grove system with various microcontrollers.\u003c\/p\u003e \u003ch3\u003eTechnical details\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCable length: 30 cm\u003c\/li\u003e \u003cli\u003eWeight: 29g\u003c\/li\u003e \u003cli\u003eConnector: 4-pin with clip\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePackage contents\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e5x Grove - Universal Grove Cable 4-Pin 30cm - Buckled (with clip)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Seeedstudio","offers":[{"title":"Default Title","offer_id":66045653680477,"sku":"F23107265","price":2.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/grove-universal-kabel-4-pin-30cm-5er-set-buckled-mit-clip-funduino-5075434.jpg?v=1791492055"},{"product_id":"grove-universal-kabel-4-pin-20cm-5er-set-buckled-mit-clip","title":"Grove 4-pin connection cable - 20 cm, 5 pieces, with clip","description":"\u003ch2\u003e4-pin universal cable for the Grove system\u003c\/h2\u003e \u003cp\u003eDesigned to connect modules to the Grove - Basic Shield or other compatible boards for rapid prototyping.\u003c\/p\u003e \u003ch3\u003eWhat is Grove?\u003c\/h3\u003e \u003cp\u003eGrove makes connecting and experimenting easier and simplifies the prototyping process. No jumpers or soldering are required. More than 300 Grove modules have been developed, covering a wide range of applications and meeting a variety of requirements. Not only the hardware is open source, but also the software.\u003c\/p\u003e \u003cp\u003eWe offer various Grove shields to enable connection to the Grove system with a range of microcontrollers.\u003c\/p\u003e \u003ch3\u003eTechnical details\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWeight: 21g\u003c\/li\u003e \u003cli\u003eCable length: 20 cm\u003c\/li\u003e \u003cli\u003eConnector: \u003cspan\u003e4-pin with clip\u003c\/span\u003e\n\u003c\/li\u003e \u003cli\u003e\u003cspan\u003e24 AWG\u003c\/span\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eScope of delivery\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e5x Grove - universal Grove cable, 4-pin, 20cm - buckled (with clip)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Seeedstudio","offers":[{"title":"Default Title","offer_id":66045655777629,"sku":"F23107267","price":1.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/grove-universal-kabel-4-pin-20cm-5er-set-buckled-mit-clip-funduino-1566940.jpg?v=1791492282"},{"product_id":"grove-universal-kabel-4-pin-20cm-5er-set","title":"Grove universal cable, 4-pin - 5 pieces, 20 cm","description":"\u003ch2\u003eGrove - Universal 4-Pin Cable Set\u003c\/h2\u003e \u003cp\u003eCompared to the Electronic Brick system, the Grove system uses only one cable type (the Electronic Brick system uses 4). These cables are compatible with all modules included in the Grove system.\u003c\/p\u003e \u003cp\u003eThis package contains 5 pieces.\u003c\/p\u003e \u003ch3\u003eWhat is Grove?\u003c\/h3\u003e \u003cp\u003eGrove makes connecting and experimenting easier and simplifies the prototyping process. No jumpers or soldering are required. More than 300 Grove modules have been developed, covering a wide range of applications and meeting a variety of requirements. Not only the hardware but also the software is open source.\u003c\/p\u003e \u003cp\u003eWe offer various Grove shields to enable connections between the Grove system and various microcontrollers.\u003c\/p\u003e \u003ch3\u003eTechnical Details\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDimensions: 200 mm x 9.6 mm x 4 mm\u003c\/li\u003e \u003cli\u003eWeight: 21 g\u003c\/li\u003e \u003cli\u003eConnector: 4-pin without clip\u003c\/li\u003e \u003cli\u003e24 AWG\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePackage Contents\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e5x Grove - Universal Grove Cable 4-Pin 20 cm - unbuckled (without clip)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Seeedstudio","offers":[{"title":"Default Title","offer_id":66045656203613,"sku":"F23107262","price":2.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/grove-universal-kabel-4-pin-20cm-5er-set-funduino-2791701.jpg?v=1791492148"},{"product_id":"steckkabel-4p-50cm-hy2-0-auf-hy2-0","title":"HY2.0 connector cable - 4-pin, 50 cm, connectors on both ends","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable for HY2.0 connectors\u003c\/li\u003e \u003cli\u003eLength: 50 cm\u003c\/li\u003e \u003cli\u003e4-pin\u003c\/li\u003e \u003cli\u003ePreassembled and ready to use\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis connection cable connects modules or components with HY2.0 sockets. It eliminates the need to solder connections manually and reduces potential sources of error during assembly.\u003c\/p\u003e \u003cp\u003eThe cable is equipped with HY2.0 plugs at both ends and therefore serves as the interface between compatible assemblies or between a sensor and controller. The 50-centimeter length is sufficient for typical setups on an experiment platform or between adjacent modules.\u003c\/p\u003e \u003cp\u003eWith pre-soldered and tested connections, the cable can be used immediately. No additional equipment or soldering work is required.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045658693981,"sku":"F23107677","price":1.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-4p-50cm-hy20-auf-hy20-funduino-6748756.png?v=1791492403"},{"product_id":"steckkabel-jst-xh2-54-zu-3p-dupont-20cm-male-female","title":"JST XH2.54 to Dupont Adapter Cable - 3-pin, 20 cm, female\/male","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable for connecting JST-XH connectors to 2.54 mm Dupont connectors\u003c\/li\u003e \u003cli\u003eLength: 20 cm\u003c\/li\u003e \u003cli\u003eJST XH2 connector (female) on one side\u003c\/li\u003e \u003cli\u003e3-pin Dupont connectors (male) on the other side\u003c\/li\u003e \u003cli\u003eEnables connections between incompatible connector systems without soldering\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis adapter cable connects JST-XH connectors to Dupont connectors, bridging the lack of compatibility between two common connector systems. One side features a JST-XH2 connector for plugging into female counterparts, while the other side has three individual male Dupont connectors that can be plugged into pin headers or PCB header pins.\u003c\/p\u003e \u003cp\u003eThe 20 cm cable is suitable for connections between battery management modules, charge controllers, and similar devices with JST-XH connectors and microcontroller boards or sensor modules equipped with standard Dupont connectors. For example, a power management module can be connected directly to a development board without soldering or special adapters.\u003c\/p\u003e \u003cp\u003eThe cable protects the pins from mechanical damage and prevents contact errors during repeated plugging and unplugging. Anyone who regularly needs to switch between different connector systems can save time and reduce the risk of downtime compared with loosely wired connections.\u003c\/p\u003e \u003cp\u003eWhen connecting, note that the pinouts may differ depending on the source. If in doubt, check the pin assignment before initial operation.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for building prototypes and for testing and development purposes. It is not suitable for installation in household electrical circuits. Check the power supply and connection sequence before operation; if you are unsure about the pin assignment, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54 to 3P Dupont cable (20 cm), female\/female\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045662003549,"sku":"F23107993","price":0.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254-zu-3p-dupont-20cm-malefemale-funduino-9693223.jpg?v=1791492475"},{"product_id":"jst-buchse-xh2-54-mm-4pin","title":"JST XH 4-pin Socket - 2.54 mm pitch, 3 A, 250 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnector with 4 contacts, 2.54 mm pitch\u003c\/li\u003e \u003cli\u003eJST-XH socket for stranded wires and flat connectors\u003c\/li\u003e \u003cli\u003eRated current of 3 A per contact\u003c\/li\u003e \u003cli\u003eOperating voltage up to 250 V AC\/DC\u003c\/li\u003e \u003cli\u003ePolarization key to prevent incorrect connections\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis connector socket belongs to the widely used JST-XH system and connects four wires or flat connectors with a standardized 2.54 mm pitch. The connection is made using crimped or soldered contacts, while the polarization key in the housing prevents incorrect connections when plugging it in.\u003c\/p\u003e \u003cp\u003eWith 3 A per contact and an operating voltage of up to 250 V, the socket is suitable for power supplies to sensor modules, drives, and controller boards in hobby and prototyping applications. Its compatibility with common connector modules and preassembled cables makes it a standard connection in many projects.\u003c\/p\u003e \u003cp\u003eTypical applications include supplying power to LED strips and motors, sensor cables in robotics projects, or modular power distribution on experimenter boards. The system is also used in battery pack connections and portable devices because it provides a secure connection and can be plugged in quickly.\u003c\/p\u003e \u003cp\u003eThe socket is used with cables or flat connectors in JST-XH format. The matching counterparts are required for assembly, as are the correct contact pins if you want to solder the connector yourself.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThese connectors are intended exclusively for prototyping, testing, and development purposes and are not suitable for installation in household mains circuits. For applications on or near electrical installations, consult a qualified electrician, especially when using voltages above the toy-voltage range.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST socket XH2.54 mm 4-pin\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045663084893,"sku":"F23109213","price":0.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/jst-buchse-xh254-mm-4pin-funduino-8682143.png?v=1791491346"},{"product_id":"steckkabel-4p-20cm-hy2-0-auf-hy2-0-grove-kompatibel","title":"HY2.0 jumper cable - 4-pin, 20 cm, Grove-compatible","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJumper cable for Grove-compatible modules\u003c\/li\u003e \u003cli\u003eConnects HY2.0 plugs to HY2.0 plugs\u003c\/li\u003e \u003cli\u003eCable length: 20 cm\u003c\/li\u003e \u003cli\u003e4-pin design for data transmission and power supply\u003c\/li\u003e \u003cli\u003eStandard pinout for I²C buses and other serial interfaces\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis jumper cable connects Grove-compatible modules directly to one another. With a length of 20 cm, it is well suited for densely populated boards, where longer cables could become tangled.\u003c\/p\u003e \u003cp\u003eThe 4-pin HY2.0 plug transmits data and power simultaneously. The standard pinout supports I²C buses, allowing multiple modules to be connected to a shared data line without requiring additional cables for each module.\u003c\/p\u003e \u003cp\u003eTypical applications include prototypes with Grove modules such as sensors or actuators, compact robot projects, and development boards. The 20 cm length is often sufficient for smaller layouts; anyone who needs to bridge larger distances will also require longer variants.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eConnecting the cable with reversed polarity may damage the connected modules. The cable is intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045663445341,"sku":"F23107655","price":1.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-4p-20cm-hy20-auf-hy20-grove-kompatibel-funduino-4496994.png?v=1791491356"},{"product_id":"master-steckkabel-jst-gh1-25mm-stecker-150mm-kabel-28awg-2p-12p","title":"JST GH connector cable 1.25 mm - 150 mm, 28 AWG, 2- to 12-pin","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJumper cable with JST-GH connector and 28 AWG wire\u003c\/li\u003e \u003cli\u003eConnector length 25 mm, cable length 150 mm\u003c\/li\u003e \u003cli\u003eAvailable in several versions\u003c\/li\u003e \u003cli\u003eTinned contacts for secure connections\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe jumper cable reliably connects assemblies with JST-GH connectors. The connector fits circuit boards and modules equipped with this standard. The 150 mm long 28 AWG wire enables flexible wiring over short to medium distances between components.\u003c\/p\u003e \u003cp\u003eThe cable ends on both sides with a preassembled connector, eliminating the need for soldering. The tinned contacts ensure secure connections without additional securing devices. This design is used with sensors, servomotors, and microcontroller boards, where plug connections speed up prototyping and enable the later replacement of individual modules.\u003c\/p\u003e \u003cp\u003eIn robotics, the cable can connect servo controllers to motors, while in drone projects it connects attitude sensors to the autopilot board. In the laboratory, it can be used to quickly connect various measuring sensors to data acquisition devices. For setting up sensor networks, 150 mm is sufficient when circuit boards are positioned close together.\u003c\/p\u003e \u003cp\u003eThe cable is only compatible with JST-GH-equipped connections. If you need to bridge greater distances between components, you will need longer versions or must extend the cable with additional wire.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for building prototypes and for testing and development purposes. It must not be installed in household electrical circuits. When working on or immediately next to electrical installations, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST GH1.25mm male jumper cable, 150mm cable (28AWG), 2P-12P\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"2-pole \/ Single Head","offer_id":66045668852061,"sku":"F23110493","price":0.68,"currency_code":"EUR","in_stock":true},{"title":"2-pole \/ Double Head","offer_id":66045976281437,"sku":"F23110503","price":0.82,"currency_code":"EUR","in_stock":true},{"title":"7-pin \/ Single Head","offer_id":66045976248669,"sku":"F23110498","price":1.18,"currency_code":"EUR","in_stock":true},{"title":"7-pin \/ Double Head","offer_id":66045976772957,"sku":"F23110508","price":1.32,"currency_code":"EUR","in_stock":true},{"title":"9-pin \/ Single Head","offer_id":66045976183133,"sku":"F23110500","price":1.3,"currency_code":"EUR","in_stock":true},{"title":"9-pin \/ Double Head","offer_id":66045976740189,"sku":"F23110510","price":1.45,"currency_code":"EUR","in_stock":true},{"title":"10-pin \/ Single Head","offer_id":66045976314205,"sku":"F23110501","price":1.35,"currency_code":"EUR","in_stock":true},{"title":"10-pin \/ Double Head","offer_id":66045976707421,"sku":"F23110511","price":1.52,"currency_code":"EUR","in_stock":true},{"title":"12-pin \/ Single Head","offer_id":66045976412509,"sku":"F23110502","price":1.48,"currency_code":"EUR","in_stock":true},{"title":"12-pin \/ Double Head","offer_id":66045976969565,"sku":"F23110512","price":1.59,"currency_code":"EUR","in_stock":true},{"title":"3-pin \/ Single Head","offer_id":66045987225949,"sku":"F23110494","price":0.82,"currency_code":"EUR","in_stock":true},{"title":"3-pin \/ Double Head","offer_id":66045976510813,"sku":"F23110504","price":0.93,"currency_code":"EUR","in_stock":true},{"title":"5-pin \/ Single Head","offer_id":66045987324253,"sku":"F23110496","price":1.01,"currency_code":"EUR","in_stock":true},{"title":"5-pin \/ Double Head","offer_id":66045976445277,"sku":"F23110506","price":1.15,"currency_code":"EUR","in_stock":true},{"title":"6-pin \/ Single Head","offer_id":66045987258717,"sku":"F23110497","price":1.08,"currency_code":"EUR","in_stock":true},{"title":"6-pin \/ Double Head","offer_id":66045976346973,"sku":"F23110507","price":1.24,"currency_code":"EUR","in_stock":true},{"title":"8-pin \/ Single Head","offer_id":66045976215901,"sku":"F23110499","price":1.24,"currency_code":"EUR","in_stock":true},{"title":"8-pin \/ Double Head","offer_id":66045976543581,"sku":"F23110509","price":1.38,"currency_code":"EUR","in_stock":true},{"title":"4-pin \/ Single Head","offer_id":66045985816925,"sku":"F23110495","price":0.93,"currency_code":"EUR","in_stock":true},{"title":"4-pin \/ Double Head","offer_id":66045976478045,"sku":"F23110505","price":1.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-steckkabel-jst-gh125mm-stecker-150mm-kabel-28awg-2p-12p-funduino-4527840.jpg?v=1791492753"},{"product_id":"jst-buchse-xh2-54-mm-10-pin","title":"10-pin JST XH socket - 2.54 mm pitch, 3 A, gold-plated","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e10-position connector receptacle according to the JST-XH standard\u003c\/li\u003e \u003cli\u003e2.54 mm pitch, total length 54 mm\u003c\/li\u003e \u003cli\u003eContacts made of gold-plated phosphor bronze\u003c\/li\u003e \u003cli\u003eFor wire cross-sections from 0.08 to 0.2 mm²\u003c\/li\u003e \u003cli\u003eOperating voltage up to 57 V DC\u003c\/li\u003e \u003cli\u003eCurrent rating 3 A per contact\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe connector serves as the receiving side for the JST-XH plug and connects sensors, motors, or batteries to development boards and project circuits. The gold-plated contacts ensure secure, oxidation-free connections over many mating cycles.\u003c\/p\u003e \u003cp\u003eThe 2.54 mm pitch corresponds to the standard hole spacing on PCBs, allowing the receptacle to be soldered directly in place. The 10-pin design enables up to three amperes per contact in parallel, depending on how many lines are carrying current.\u003c\/p\u003e \u003cp\u003eThe receptacle is used in robotics projects with multimotor drives, battery packs for multichannel sensor networks, and modular power distribution systems. It is also found in drone ESC systems, where reliable plug connections are required under vibration.\u003c\/p\u003e \u003cp\u003eFor connection, the wires require cross-sections from 0.08 to 0.2 mm²; matching crimp contacts are available separately. The maximum operating voltage is 57 V DC, which excludes use in high-voltage applications.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eCrimp contacts must be inserted correctly into the receptacle housing to prevent short circuits. The product is intended exclusively for building prototypes and for testing and development purposes and is not suitable for continuous operation in household electrical circuits. When working on or near electrical installations, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST receptacle XH2.54 mm 10-pin\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045672980829,"sku":"F23109214","price":0.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/jst-buchse-xh254-mm-10-pin-funduino-4574549.png?v=1791491223"},{"product_id":"steckkabel-jst-xh2-54-zu-4p-dupont-20cm-male-female","title":"JST XH2.54 to Dupont adapter cable - 4-pin, 20 cm, male\/female","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable between a JST-XH2-54 connector and a 4-pin Dupont connector\u003c\/li\u003e \u003cli\u003eLength: 20 cm\u003c\/li\u003e \u003cli\u003eAvailable in male and female versions\u003c\/li\u003e \u003cli\u003eFlexible connection between different connector systems\u003c\/li\u003e \u003cli\u003eSuitable for low-power applications up to approximately 3 A per conductor\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis connection cable bridges the incompatibility between JST-XH2-54 sockets and standard Dupont connectors. With a length of 20 cm, it allows a typical sensor or small module to be separated from the main board over a moderate distance without requiring additional adapters. The cable is fitted with female Dupont contacts and male JST-XH2-54 contacts and connects four signal lines.\u003c\/p\u003e \u003cp\u003eDupont connectors are the standard connection system used by many development boards and breakout modules. JST-XH2-54 connectors are commonly found on battery-powered devices or balancer boards. This cable enables both systems to be connected directly without an additional adapter. The wire diameters are designed for currents of up to approximately 3 amperes per conductor, which is sufficient for typical sensor and low-power control tasks.\u003c\/p\u003e \u003cp\u003eThe cable is often used in projects where a LiPo balancer is connected to the charger or several I2C sensors are connected to a development board. It can also be used to control small motors or power modules, as long as the total power remains low. The cable is not designed for high-load applications above 5 A.\u003c\/p\u003e \u003cp\u003eBefore commissioning, check that the connectors are properly seated to prevent loose contacts. Reversing the connector polarity can damage sensitive modules, so pay attention to the connector polarity when connecting.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis cable is intended exclusively for prototypes and test setups with operating voltages of up to 15 V and currents of no more than 3 A per conductor. Consult a qualified electrician before working on the power supply or, if in doubt, before connecting the cable due to polarity concerns.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54 to 4P Dupont connection cable (20cm) female\/female\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045682319709,"sku":"F23108004","price":1.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254-zu-4p-dupont-20cm-malefemale-funduino-3596639.jpg?v=1791492755"},{"product_id":"steckkabel-jst-hy2-0mm-8p-20cm-male","title":"JST HY connector cable 2.0 mm - 8-pin, 20 cm, male","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJST HY2.0 plug cable with 8-pin socket and plug, 20 cm long\u003c\/li\u003e \u003cli\u003eContact spacing: 2.0 mm\u003c\/li\u003e \u003cli\u003eRated current: 3 A per contact\u003c\/li\u003e \u003cli\u003eCrimping required\u003c\/li\u003e \u003cli\u003eSuitable for prototypes and test setups with compatible JST HY modules\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eA plug cable with a JST HY2.0 connection connects modules and components that use this plug-and-socket pair. The cable is 20 cm long and has an 8-pin plug on one side and an 8-pin socket on the other. Each contact is rated for 3 A, making it suitable for power supplies in the low-ampere range as well as signal lines.\u003c\/p\u003e \u003cp\u003eThe wires must be crimped, meaning they must be connected using crimping tools. The individual conductors are inserted into the contact terminals, which then lock into the housing. Anyone who regularly assembles JST HY connections will need a suitable crimping tool as well as the corresponding crimp contacts as consumables.\u003c\/p\u003e \u003cp\u003eThe cable is used to connect sensors, power supplies, and controller boards in prototype setups. It is often used in drone, robotics, and model-making projects where secure plug connections without soldering are required. Its compact design and low weight make it particularly useful for mobile applications.\u003c\/p\u003e \u003cp\u003ePlease note that the wires are not supplied stripped. Anyone integrating the cable into an existing system must either prepare the ends themselves or obtain a pre-crimped cable. The maximum current capacity is 3 A per conductor, which means high-current applications above 25 A require other connector systems.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for building prototypes and for testing and development purposes. The contacts must not be exposed to mains voltage. Work on or near electrical installations must be carried out by qualified electricians. If you are unsure about the required current rating, consult a qualified electrician before use.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cp\u003e1x JST HY2.0mm 8P plug cable - 20cm - male\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045692871005,"sku":"F23107511","price":1.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-hy20mm-8p-20cm-male-funduino-7282360.png?v=1791493025"},{"product_id":"steckkabel-hy2-0-4p-auf-offenes-ende-20cm-grove-kompatibel","title":"HY2.0-4P jumper cable - open end, 20 cm, Grove-compatible","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJumper cable for connecting Grove modules with open wire ends\u003c\/li\u003e \u003cli\u003eLength: 20 cm\u003c\/li\u003e \u003cli\u003e4-pin connection with standard connectors\u003c\/li\u003e \u003cli\u003eEnables connection to breadboards and solderless circuits\u003c\/li\u003e \u003cli\u003eCompatible with the Grove ecosystem\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis connection cable connects Grove-compatible modules with open wire ends for flexible circuit setups. The four wires are color-coded and enable connection to both standard pin headers and directly to breadboards or other components without soldering.\u003c\/p\u003e \u003cp\u003eThe cable spans a distance of 20 cm, making it suitable for connecting adjacent assemblies on typical experimenter boards. The connector on one side ensures secure, repeatable connections to the Grove module, while the open wires on the other side offer maximum connection options.\u003c\/p\u003e \u003cp\u003eApplications include prototype setups with sensor and actuator modules, connections between microcontroller boards and Grove sensors in confined spaces, and temporary test circuits where the wiring is frequently changed.\u003c\/p\u003e \u003cp\u003eJumper wires or connectors are required for the open ends if they are not inserted directly into a breadboard. The cable is intended exclusively for prototyping and development.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis cable is intended exclusively for building prototypes and for testing and development purposes. Use in household electrical circuits is not permitted. If you are unsure about safe connections or circuits, consult a qualified electrician before assembly.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045692936541,"sku":"F23107519","price":0.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-hy20-4p-auf-offenes-ende-20cm-grove-kompatibel-funduino-5888034.png?v=1791493028"}],"url":"https:\/\/funduino.com\/en\/collections\/jst-system.oembed","provider":"Funduino","version":"1.0","type":"link"}