{"title":"GSM \u0026 GPRS","description":null,"products":[{"product_id":"sim800l-v2-0-5v-wireless-gsm-gprs-modul-quad-band-mit-antenne-m105","title":"SIM800L V2.0 GSM\/GPRS Module - Quad-Band, UART, SIM Slot","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGSM\/GPRS module for quad-band cellular networks (850\/900\/1800\/1900 MHz)\u003c\/li\u003e \u003cli\u003eOperating voltage 3.3 V; requires an external power supply with at least 2 A peak current\u003c\/li\u003e \u003cli\u003eSIM card interface and serial UART communication\u003c\/li\u003e \u003cli\u003eTransmitting and receiving antenna required\u003c\/li\u003e \u003cli\u003eSMS, voice calls, and data transmission supported\u003c\/li\u003e \u003cli\u003eSMD components mounted on a compact module\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe GSM\/GPRS module connects projects to the cellular network. It is a quad-band transceiver that operates in all GSM frequency bands commonly used worldwide, making it suitable for use independently of the local provider.\u003c\/p\u003e \u003cp\u003eThe module communicates with the control unit, such as a microcontroller board, via commands over the UART interface. Because the operating voltage is 3.3 V and the peak current can reach approximately 2 A, it requires a dedicated power supply rather than the power rail of a development board. Connecting it to a 5 V system requires a level shifter for the data lines. A SIM card with an activated cellular plan is inserted into the card slot; the antenna must be connected externally.\u003c\/p\u003e \u003cp\u003eThe module is suitable for remotely controlled alarm systems that send notifications via SMS, vehicle trackers with location updates via GPRS, or remote devices in hard-to-reach areas that receive data exclusively via cellular networks. Weather stations can also use it to transmit their readings to a server.\u003c\/p\u003e \u003cp\u003eA suitable external power supply (voltage regulator or battery), a valid SIM card with an enabled plan, and a cellular antenna are required. A level shifter is essential when connecting to 5 V logic; direct contact with 5 V will damage the module.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe module is not intended for installation in the household electrical circuit and is exclusively intended for building prototypes and for testing and development purposes. Operation requires an external power supply with at least 2 A peak current; an insufficient power supply will cause malfunctions. When used in a network setup or in systems with high-power electrical components, work on or near the electrical installation must be carried out by a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x SIM800L V2.0 5V Wireless GSM\/GPRS Module - Quad-Band, with M105 antenna\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997913194845,"sku":"F23108831","price":8.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/sim800l-v20-5v-wireless-gsmgprs-modul-quad-band-mit-antenne-m105-funduino-7253006.jpg?v=1791494952"},{"product_id":"gy-neo6mv2-gps-modul-apm2-5-mit-eeprom","title":"GY-NEO6MV2 GPS module - with EEPROM, UART, 5 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGPS module with NEO-6 chip for global positioning\u003c\/li\u003e \u003cli\u003eSerial UART connection for microcontrollers and single-board computers\u003c\/li\u003e \u003cli\u003eEEPROM memory for configurations and data\u003c\/li\u003e \u003cli\u003eOperating voltage 5 V, typical power consumption approximately 45 mA\u003c\/li\u003e \u003cli\u003eExternal active antenna for improved signal reception\u003c\/li\u003e \u003cli\u003eCompatible with APM and PX4 flight control systems\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe NEO-6 GPS module is used for precise positioning via satellite navigation. It receives signals from the GPS network and calculates latitude, longitude, and altitude from them. The UART connection makes it easy to connect the module to the serial port of a microcontroller or single-board computer.\u003c\/p\u003e \u003cp\u003eThe module requires an operating voltage of 5 V and consumes approximately 45 mA during operation. The EEPROM memory stores configurations and navigation parameters, allowing the module to retain the most recently used settings after restarting. An external active antenna (included or available separately) significantly improves signal reception, especially in unfavorable environments such as between buildings or under dense tree cover.\u003c\/p\u003e \u003cp\u003eThe module is suitable for unmanned quadcopters and other drones that use flight control systems such as APM or PX4. It can also be used in robotics projects with autonomous navigation or in stationary data loggers that need to record GPS timestamps. A precision agricultural tractor could use it as the basis for automatic lane guidance.\u003c\/p\u003e \u003cp\u003eReception requires a clear line of sight to the sky and takes several minutes after a cold start; the module then operates faster. Additional components are required: a 5 V power supply (typically a voltage regulator when battery-powered), UART interface cables to the microcontroller, and the development environment for the flight control board or microcontroller to read and process the module's output.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe module is intended exclusively for building prototypes and for testing and development purposes. It is not suitable for installation in household power circuits. Work on or near electrical installations must be carried out by a qualified electrician; if you are unsure about the power supply or connection, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cp\u003eThe module is suitable for unmanned quadcopters and other drones that use flight control systems such as APM or PX4. It can also be used in robotics projects with autonomous navigation or in stationary data loggers that need to record GPS timestamps. A precision agricultural tractor could use it as the basis for automatic lane guidance.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998342553949,"sku":"F23106933","price":7.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gy-neo6mv2-gps-modul-apm25-mit-eeprom-funduino-8929436.png?v=1791495540"},{"product_id":"sim808-gsm-gprs-gps-shield-mit-antenne","title":"SIM808 shield - GSM, GPRS, GPS with antenna, 5 V","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCommunication and positioning module with GSM, GPRS and GPS\u003c\/li\u003e \u003cli\u003e5 V operating voltage, directly connectable to standard boards\u003c\/li\u003e \u003cli\u003eSIM card slot for mobile network access\u003c\/li\u003e \u003cli\u003eGPS receiver for worldwide location tracking\u003c\/li\u003e \u003cli\u003eSerial interface (UART) for the microcontroller\u003c\/li\u003e \u003cli\u003eExternal antenna included\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis communication module connects microcontroller projects to mobile networks and satellite navigation. The module combines three functions: GSM for voice and SMS, GPRS for data transmission, and GPS for real-time positioning. The module operates with 5-volt logic and connects via a serial interface, compatible with common Arduino-compatible boards and other development boards with UART connections.\u003c\/p\u003e \u003cp\u003eThe module requires an active SIM card with an enabled data plan for GSM and GPRS, while GPS works without a SIM card. The GPS position is determined with an accuracy of approximately ten meters, which is sufficient for many tracking and navigation applications. Communication takes place via AT commands sent by the microcontroller. The external antenna significantly improves reception and should be attached during setup.\u003c\/p\u003e \u003cp\u003eApplications range from GPS loggers for vehicles or hikes and alarm systems with SMS notifications to IoT sensors that transmit measurement data via mobile networks. Remote control of devices via SMS is also possible. A typical application is a vehicle tracking device that sends position data to the internet and triggers motion alarms via SMS.\u003c\/p\u003e \u003cp\u003eOperation requires a power supply module capable of handling the module's current peaks; additional battery buffering may be useful. Communication with the mobile network is subject to the SIM card provider's charges, and signal availability depends on local network coverage. For projects with critical GPS accuracy or connection reliability requirements, these limitations should be checked before starting the project.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe module is not intended for installation in household electrical circuits and is exclusively designed for building prototypes and for testing and development purposes. Work on or in the immediate vicinity of the mobile network antenna must be avoided during operation. For technical questions about integration into existing electrical installations, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003ePackage contents\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x SIM808 - GSM, GPRS, GPS shield with antenna\u003c\/li\u003e \u003cli\u003e1x GPS antenna\u003c\/li\u003e \u003cli\u003e1x mobile network antenna\u003c\/li\u003e \u003cli\u003e1x connection cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045644931421,"sku":"F23108654","price":38.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/sim808-gsm-gprs-gps-shield-mit-antenne-funduino-9050229.png?v=1791491025"},{"product_id":"gps-modul-neo-6m-v2-mit-apm2-5-flight-control-eeprom-navigation","title":"NEO-6M V2 GPS module - 3.3 V, I2C and serial, with EEPROM","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGPS receiver with protocol support for UAV flight controllers\u003c\/li\u003e \u003cli\u003eOperating voltage 3.3 V, I2C and serial interfaces\u003c\/li\u003e \u003cli\u003eDetection range up to approximately 50 m altitude\u003c\/li\u003e \u003cli\u003eCalibration-free positioning after signal acquisition\u003c\/li\u003e \u003cli\u003eIntegrated EEPROM for configuration data\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe GPS module receives satellite signals and forwards position data to flight controller boards such as the APM2.5. It requires a 3.3 V operating voltage; a level shifter is required when connecting it to 5 V boards. Communication takes place via a serial interface or I2C bus, allowing multiple modules to be connected to an I2C bus without additional pins.\u003c\/p\u003e \u003cp\u003eAfter being switched on, the module must acquire satellites; depending on the signal conditions, this cold start takes anywhere from a few seconds to several minutes. It then continuously reports altitude, latitude, and longitude. During flight, this supports autonomous navigation functions such as GPS-controlled return to the launch position or waypoint flight up to an altitude of approximately 50 m; above this altitude, the flight controller no longer receives usable signals.\u003c\/p\u003e \u003cp\u003eThe module is primarily used in UAV projects with APM2.5 flight controllers to feed GPS data into the control logic. The integrated EEPROM stores configuration values, which are retained if the power supply is interrupted.\u003c\/p\u003e \u003cp\u003eA power supply and a compatible flight controller board are required accessories. The module requires a clear view of the sky for satellite reception; operation indoors is not practical.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eHigh-frequency electromagnetic radiation may be present in the immediate vicinity of the antenna during satellite reception. The module is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in household electrical circuits. If you are unsure about the power supply or integration into flight controller systems, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eGPS module NEO-6M V2 with APM2.5 flight control \/ EEPROM Navigation\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045655384413,"sku":"F23108053","price":15.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/gps-modul-neo-6m-v2-mit-apm25-flight-control-eeprom-navigation-funduino-3241432.png?v=1791491788"},{"product_id":"mini-gps-modul-neo-7m","title":"NEO-7M GPS Module - u-blox GNSS, UART NMEA, 3,3-5 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGPS receiver module with GNSS chip for determining position, speed, and time\u003c\/li\u003e \u003cli\u003eSerial UART output in NMEA format with TTL voltage levels\u003c\/li\u003e \u003cli\u003eTwo antenna connectors (SMA and IPEX) for flexible external antenna installation\u003c\/li\u003e \u003cli\u003eSupply voltage 3.3 to 5 V, with level shifter for operation with 5 V boards\u003c\/li\u003e \u003cli\u003eIntegrated EEPROM for permanent storage of configuration settings\u003c\/li\u003e \u003cli\u003eCompatible with Arduino, 8051 MCU, and STM32 via a simple serial connection\u003c\/li\u003e \u003cli\u003eModule size under 25 mm, PPS pin for one-second pulse time synchronization\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe GPS receiver module uses the GNSS chip to evaluate navigation satellite signals and determine the position, speed, and current time. The calculated data is output as serial raw data in NMEA format via a UART interface.\u003c\/p\u003e \u003cp\u003eThe module connects to a microcontroller via two data pins (TXD and RXD) using TTL voltage levels. Since the module already includes level shifting, it can be connected directly to common boards ranging from Arduino to STM32 without additional voltage converters, even when they operate at 5 V. An additional PPS pin serves as a one-second pulse output for precise time synchronization independently of the serial data flow.\u003c\/p\u003e \u003cp\u003eTwo different antenna connectors, SMA and IPEX, are available for satellite reception. This selection allows you to choose an external antenna with the appropriate connector and position it flexibly, which is especially useful in confined or metal-framed installation environments. Typical applications include position determination for navigation devices, vehicle and object tracking, and projects requiring a precise time base.\u003c\/p\u003e \u003cp\u003eThe module permanently stores configuration settings in an integrated EEPROM, so they remain retained even after the supply voltage is switched off. Operation requires an external antenna with the appropriate connector and a power supply between 3.3 and 5 V; satellite reception is not possible without an antenna.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe module is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in household electrical circuits. When working on or near electrical installations, qualified electricians must be engaged. If in doubt, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* Mini GPS Module NEO-7M\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045680025949,"sku":"F23108638","price":16.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/mini-gps-modul-neo-7m-funduino-3516887.png?v=1791492611"}],"url":"https:\/\/funduino.com\/en\/collections\/gsm-and-gprs.oembed","provider":"Funduino","version":"1.0","type":"link"}