{"title":"Gimbals","description":null,"products":[{"product_id":"kamerahalterung-gimbal-mit-zwei-achsen-fur-2x-mg90-servo","title":"Gimbal camera mount - 2 axes for 2x MG90 servo, up to 500 g","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTwo-axis gimbal for stabilizing cameras on drones or mobile robots\u003c\/li\u003e \u003cli\u003eLoad capacity of up to 500 g, suitable for compact and lightweight action cameras\u003c\/li\u003e \u003cli\u003eControl via two separate servo motors (MG9)\u003c\/li\u003e \u003cli\u003ePan range: tilt 90 degrees, yaw 180 degrees\u003c\/li\u003e \u003cli\u003eMounting via quick-release plate or adhesive mounting\u003c\/li\u003e \u003cli\u003ePlastic construction with integrated ball bearings\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eA two-axis gimbal stabilizes cameras using two independently controlled servo motors, removing camera shake during flight or compensating for movements of the carrier platform. The two MG9 motors enable panning movements in tilt and yaw, while a third degree of freedom (roll) remains mechanically fixed. The mount is designed for cameras weighing up to approximately 500 grams.\u003c\/p\u003e \u003cp\u003eThe tilt range covers 90 degrees, while the yaw range reaches 180 degrees. These axis ranges provide the framework for scenarios such as smooth pans over a person being tracked, stable overhead shots while the quadcopter rotates, or gentle camera movements on ground-based platforms. The faster the servos are driven and the more intense the system's base movement, the more the gimbal must compensate through counter-movement.\u003c\/p\u003e \u003cp\u003eTo operate it, two servo control channels are required on the flight controller or robot board, typically using PWM signals (pulse-width modulation). The camera is mounted using a quick-release plate or adhesive mounting; for heavier setups with greater torque, a secure mounting and balancing are recommended. Before operation, the gimbal should be set to the neutral position so that the servos do not move to their end positions while uncalibrated.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eWhen wiring and commissioning the device, the servo motors must not be driven against their mechanical end positions in order to prevent damage. The gimbal is intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x camera mount \/ two-axis gimbal\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997840154973,"sku":"F23106409","price":1.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kamerahalterung-gimbal-mit-zwei-achsen-fuer-2x-mg90-servo-funduino-5301107.jpg?v=1791493648"},{"product_id":"2-achsen-brushless-gimbal-mos-controller-mit-gy6050-sensor","title":"2-axis gimbal controller - brushless, 5-16 V, GY6050 sensor","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eControl module for brushless motors in two-axis gimbal systems\u003c\/li\u003e \u003cli\u003ePWM input for remote control receivers or RC signals\u003c\/li\u003e \u003cli\u003ePower supply: 5-16 V DC\u003c\/li\u003e \u003cli\u003eIntegrated GY605 tilt sensor for position control\u003c\/li\u003e \u003cli\u003eOutputs for two independently controlled motor axes\u003c\/li\u003e \u003cli\u003eCompact design for camera mounts or sensor stabilization\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe control module for brushless gimbal motors is a controller for two motor axes that converts remote control or RC signals into control commands for motor movement. The integrated GY605 sensor detects the current tilt of the mount in two spatial directions, allowing the electronics to continuously adjust the motor currents so that the orientation remains stable, regardless of movement or vibration of the carrier device.\u003c\/p\u003e \u003cp\u003eIt operates between 5 and 16 volts, making it compatible with various power sources, from small batteries for lightweight systems to larger batteries for more powerful motors. The PWM input receives control signals directly from a standard remote control receiver. The module controls the motor currents according to control laws that the GY605 continuously adjusts based on the measured position. Manual calibration is not required.\u003c\/p\u003e \u003cp\u003eApplications include any situation where cameras or sensors need to remain stably aligned during movement. A camera mounted on a drone arm can remain pointed in the selected direction regardless of movement or vibration of the carrier device. Spectrometers and thermal cameras in mobile measurement systems also benefit from a stable mount.\u003c\/p\u003e \u003cp\u003eOperation requires two brushless motors with a suitable current draw for the selected supply voltage, as well as a receiver or signal source that provides standard remote control PWM. Systems with voltages above 16 volts are not supported. For very high loads or when controlling large motors, a power budget of at least 20 amperes should be available.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eCheck the polarity of the power supply before making the first connection. The module is intended solely for building prototypes and development purposes and is not suitable for installation in household electrical circuits or production devices. When working on or near mains voltage sources, consult a qualified electrician before commissioning the system.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66044720546141,"sku":"F23108417","price":22.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/2-achsen-brushless-gimbal-mos-controller-mit-gy6050-sensor-funduino-4462422.png?v=1791488626"}],"url":"https:\/\/funduino.com\/en\/collections\/gimbals.oembed","provider":"Funduino","version":"1.0","type":"link"}