{"title":"Extension cable","description":null,"products":[{"product_id":"adapterkabel-fur-stromversorgung-y-adapter-mit-5-5-2-1mm-dc-stecker","title":"Y-Adapter Cable for Power Supply - DC 5.5 x 2.1 mm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eY-adapter for power supply with five connection options\u003c\/li\u003e \u003cli\u003eEnables parallel power supply for multiple modules or devices\u003c\/li\u003e \u003cli\u003eReduces the number of separate power cables required\u003c\/li\u003e \u003cli\u003eRobust plug connections with secure retention\u003c\/li\u003e \u003cli\u003eSuitable for prototype construction and test circuits\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis Y-adapter connects one power supply to up to five different consumers in parallel. This saves space when wiring setups with multiple power-hungry modules or sensors.\u003c\/p\u003e \u003cp\u003eAll five outputs are supplied simultaneously with the same voltage and current from the single input socket. This significantly reduces the number of power cables required without the need to use separate power supplies for each module. This greatly simplifies wiring, especially in projects with many components operating in parallel.\u003c\/p\u003e \u003cp\u003eThe adapter can be used when setting up sensor networks in which multiple measurement modules are powered simultaneously, or in robot prototypes with many drives connected in parallel. It also saves handling effort in test setups with various expansion boards and reduces potential sources of error caused by too many cable connections.\u003c\/p\u003e \u003cp\u003eThe power supply must provide sufficient total power for all five connected consumers. When using high-current components, the available current of the power supply should be checked to avoid overloading. The plug connections must be loaded correctly to ensure safe operation.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe adapter is not suitable for connection to the mains supply and may only be used for building prototypes and for testing and development purposes. Before commissioning, check that the connected power supply does not exceed the total power rating of all four modules. If you are unsure about electrical connections, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* power supply adapter cable - Female to Male, with 5.5*2.1mm DC plug\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997882523997,"sku":"F23106148","price":1.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/adapterkabel-fuer-stromversorgung-y-adapter-mit-5521mm-dc-stecker-funduino-6925024.jpg?v=1791493830"},{"product_id":"verlangerungskabel-fur-microsd-karten-48cm-kabellange","title":"MicroSD Extension Cable - 48 cm, flat and flexible","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable for extending MicroSD card slots by 48 cm\u003c\/li\u003e \u003cli\u003eConnection via standard MicroSD socket and plug\u003c\/li\u003e \u003cli\u003eEnables memory cards to be installed in hard-to-reach or spatially remote positions\u003c\/li\u003e \u003cli\u003eFlat, flexible cable for easy routing in tight enclosures\u003c\/li\u003e \u003cli\u003eSuitable for single-board computers, data loggers, and embedded systems\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis extension cable brings MicroSD card slots to locations where they do not fit structurally or where the memory card must remain accessible during operation. The 48 cm cable bridges the distance between the data device and the card's installation location without requiring additional adapters.\u003c\/p\u003e \u003cp\u003eThe cable connects directly to the device's MicroSD socket and terminates in a standard MicroSD plug. Please note that the card's transfer speed remains dependent on the host device's specifications; the cable itself does not impair data transfer. The contacts are gold-plated, reducing corrosion and improving connection reliability.\u003c\/p\u003e \u003cp\u003eTypical applications include externally mounting memory cards on weatherproof data loggers, positioning them in camera systems where the card needs to be replaced from the outside, or spatially separating the storage medium from the controller in prototype setups. The cable also provides a solution for cramped enclosures where MicroSD slots would be obstructed.\u003c\/p\u003e \u003cp\u003eA host device with a standard MicroSD card slot is required. The cable is not designed for constant insertion and removal; repeated mechanical stress may loosen the contacts. Operating temperatures between 0 and 60 degrees Celsius are supported.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for building prototypes and for testing and development purposes. Make sure the polarity is correct when connecting it; a connection with reversed polarity can damage the host device or memory card. If the cable is damaged or the contacts are insecure, inspect it before further use.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x MicroSD card extension cable - 48 cm cable length\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998026408285,"sku":"F23107189","price":5.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/verlaengerungskabel-fuer-microsd-karten-48cm-kabellaenge-funduino-2217711.png?v=1791496147"},{"product_id":"master-micro-sd-verlangerungskabel-tf-tf-mit-vergoldeten-kontakten","title":"Micro SD extension cable - TF to TF, gold-plated contacts, various lengths","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eExtension cable for microSD cards with flexible printed circuit (FPC)\u003c\/li\u003e \u003cli\u003eGold-plated contacts (18K) for low contact resistance and corrosion protection\u003c\/li\u003e \u003cli\u003eExtremely thin and flexible, fits into tight enclosures\u003c\/li\u003e \u003cli\u003ePassive direct connection without electronics or power supply\u003c\/li\u003e \u003cli\u003eRelocates the card slot to a more accessible position\u003c\/li\u003e \u003cli\u003eCable design allows repeated movement and frequent card changes without damage\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe extension cable for microSD cards bridges the distance between a device's card slot and the location where the memory card is actually inserted. One end of the thin, flexible flat cable has a TF connector that plugs into the device's card slot; the other end has a holder for the microSD card itself. The cable's extremely low thickness allows it to be routed even inside space-constrained enclosures.\u003c\/p\u003e \u003cp\u003eThe contacts are gold-plated, offering two advantages: contact resistance remains low, and the contacts are protected against corrosion. This is particularly valuable when the card is changed frequently or the cable must be moved repeatedly. The flexible printed circuit withstands such movement without breaking the conductors, whereas rigid connectors would fatigue under comparable stress.\u003c\/p\u003e \u003cp\u003eSince the cable only transmits signals and contains no electronics of its own, it does not require a power supply. It is suitable wherever the original card slot is difficult to access or mechanically inconveniently positioned, such as in navigation systems where the card needs to be more accessible beneath the dashboard, in 3D printers with tight enclosures, or in tablets and smartphones with a side-mounted slot.\u003c\/p\u003e \u003cp\u003eThe cable works with all standard microSD cards and is compatible with any device that has a TF slot in the usual format. No drivers, calibration, or additional components are required for operation.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe cable is a passive component and contains no live components. It is intended exclusively for prototype construction and testing and development purposes and is not suitable for installation in household electrical circuits.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* microSD extension cable with gold-plated contacts\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"160mm","offer_id":66045034398045,"sku":"F23108370","price":11.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-micro-sd-verlaengerungskabel-tftf-mit-vergoldeten-kontakten-funduino-6017077.png?v=1791489007"},{"product_id":"master-1-paar-2p-m8-kabel-15cm-wasserdicht","title":"M8 connection cable - 2-pin, 15 cm, waterproof, various connector types","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnecting cable with M8 connectors, 2-pin, 15 cm long\u003c\/li\u003e \u003cli\u003eWaterproof potted connection\u003c\/li\u003e \u003cli\u003eFor use in damp and wet environments\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe connecting cable with M8 connectors reliably connects sensors and actuators in damp or wet environments. The waterproof potted connection protects the contacts from moisture and corrosion, enabling long operating periods without downtime.\u003c\/p\u003e \u003cp\u003eThe cable uses the standard M8 interface pinout (2-pin), allowing it to work directly with compatible sensors and control devices. The 15 cm length is suitable for short connection paths and confined installation conditions.\u003c\/p\u003e \u003cp\u003eTypical applications include moisture sensors in livestock farming or aquaculture, proximity switches on spraying machines, and flow detectors in water systems. These cables are also used in automatic irrigation systems or cleaning equipment where constant contact with water is normal.\u003c\/p\u003e \u003cp\u003eA corresponding M8 connector module or a sensor with an M8 socket is required for connection. The cable is available in several versions.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in household electrical circuits. Work on or near electrical installations must be carried out by a qualified electrician. The waterproofing applies to the connection; moisture may penetrate if the cable sheath is damaged.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1 pair of 2P M8 extension cables, 15cm, waterproof - connection according to selected variant\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Male\/Female","offer_id":66045150953821,"sku":"F23109290","price":3.14,"currency_code":"EUR","in_stock":true},{"title":"Male\/Male","offer_id":66045728522589,"sku":"F23109288","price":2.65,"currency_code":"EUR","in_stock":true},{"title":"Female\/Female","offer_id":66045728653661,"sku":"F23109286","price":2.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-1-paar-2p-m8-kabel-15cm-wasserdicht-funduino-1815674.png?v=1791490508"},{"product_id":"schleifring-schleifringverbinder-jym005-5-4s-500rpm-5-5mm-4ch","title":"JYM005.5-4S slip ring - 4 channels, Ø 5.5 mm, 500 rpm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSlip ring connector for rotating power supply and signal transmission\u003c\/li\u003e \u003cli\u003e5 slip ring pairs for simultaneous transmission of multiple circuits\u003c\/li\u003e \u003cli\u003ePlug design with integrated slip ring design\u003c\/li\u003e \u003cli\u003eMaximum rotation speed of 500 revolutions per minute\u003c\/li\u003e \u003cli\u003eCopper contacts for reliable, low-wear connections\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA slip ring connector transmits power and signals between a stationary part and a rotating part. With five independent slip ring pairs, multiple circuits can be used simultaneously, for example to supply power to a motor and collect data from sensors on the rotating shaft.\u003c\/p\u003e \u003cp\u003eContact is established mechanically via copper brushes and rings. This eliminates movement restrictions that would arise with rigid connections. Wear is low, and the service life is designed for repeated rotations.\u003c\/p\u003e \u003cp\u003eApplications include test benches, experimental setups and laboratory setups with rotating components, an accelerated centrifugal force test with sensor evaluation, a rotating table with an object wrapped around it and lighting, or a multi-axis test bench where measured data is recorded synchronously with the rotation. The maximum operating speed of 500 revolutions per minute determines which rotation speeds are possible.\u003c\/p\u003e \u003cp\u003eOperation requires a power supply, suitable cables and a drive element. The specific wiring depends on the voltages and signals to be transmitted. This model is not suitable for operating speeds above 500 rpm.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eSlip ring connectors are intended exclusively for building prototypes and for testing and development purposes, not for installation in household electrical circuits. Moving parts can cause injuries during rotation; operation requires appropriate protective measures. If there is any uncertainty about integrating the connector into the planned application, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Slip ring slip ring connector JYM005.5-4S, 500rpm, 5.5mm 4CH\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045601317213,"sku":"F23107649","price":11.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/schleifring-schleifringverbinder-jym0055-4s-500rpm-55mm-4ch-funduino-6055128.jpg?v=1791490189"},{"product_id":"av-kabel-fur-raspberry-pi-2-b-und-b","title":"AV cable for Raspberry Pi - 3.5 mm jack to 3x RCA, 1.5 m","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable for audio and video signals for the Raspberry Pi 2 B and B\u003c\/li\u003e \u003cli\u003e3.5 mm jack plug on one end\u003c\/li\u003e \u003cli\u003eComposite video and stereo audio connections on the other end\u003c\/li\u003e \u003cli\u003eLength: 1.5 m\u003c\/li\u003e \u003cli\u003eGold-plated contacts to prevent oxidation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe AV cable connects Raspberry Pi 2 B or Pi B series single-board computers to displays and audio devices via composite video and stereo audio. The 3.5 mm jack plug on the board connects to three separate RCA sockets that transmit video and the left and right audio channels.\u003c\/p\u003e \u003cp\u003eWith a cable length of 1.5 m, there is sufficient distance between the computer and display without requiring additional extensions. The gold-plated contacts provide long-term protection against corrosion, especially when the cable is frequently reconnected.\u003c\/p\u003e \u003cp\u003eThe cable enables use with older televisions and monitors that do not have an HDMI or DVI input, as well as amplifiers with RCA inputs. Typical applications include retro setups with classic CRTs, playing media projects on available equipment, or temporary test setups during development.\u003c\/p\u003e \u003cp\u003eCompatibility is limited to the Raspberry Pi 2 B and Pi B; it is not compatible with newer versions. The cable is fully responsible for signal transmission, and a reduction in quality compared with a high-quality HDMI setup is to be expected.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for connecting the single-board computer to displays and audio devices; use in electrical circuits is not permitted. It is intended for building prototypes and for testing and development purposes. Work on or near household electrical installations must be carried out by qualified electricians.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045601448285,"sku":"F23108405","price":5.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/av-kabel-fuer-raspberry-pi-2-b-und-b-funduino-3350026.jpg?v=1791489565"},{"product_id":"flachbandkabel-fur-raspberry-pi-26-pin-2x13","title":"26-pin ribbon cable - 2x13 connector, for Raspberry Pi","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eRibbon cable with a 26-pin connector for the Raspberry Pi GPIO header\u003c\/li\u003e \u003cli\u003eConnects the board directly or via expansion modules to sensors and actuators\u003c\/li\u003e \u003cli\u003eVersion with two-row 13-pin connectors, populated on both ends\u003c\/li\u003e \u003cli\u003eSpace-saving thanks to the flat cable instead of individual wires\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe ribbon cable connects a Raspberry Pi via the GPIO header directly to modules for signal acquisition or control. The flat 26-pin cable with 2*13 connectors on both ends can be routed in a space-saving manner without having to assemble individual wires separately. The polarity is defined by the connector geometry, so incorrect connections are prevented.\u003c\/p\u003e \u003cp\u003eThe cable is subject to the same electrical conditions as the Raspberry Pi's GPIO signals themselves: 3.3 V logic for the data lines. The mechanically secured connectors at both ends ensure reliable contact. Projects that control multiple sensors or switches via the GPIO header use prefabricated connection cables instead of implementing the connections with individual wires and breadboards.\u003c\/p\u003e \u003cp\u003eThe cable fits all single-board computers with a standard GPIO header on a 2.54-mm pitch, which applies to various generations and compatible boards. A distribution header or adapter board is required to connect additional modules via the same cable. The cable length determines the maximum possible distance between the board and the connected modules.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for building prototypes and for testing and development purposes. It is not intended for installation in the household electrical system. Work on or near electrical installations must be carried out by qualified electricians.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045657350493,"sku":"F23108866","price":2.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/flachbandkabel-fuer-raspberry-pi-26-pin-2x13-funduino-9754118.png?v=1791491248"},{"product_id":"kabelset-bananenstecker-auf-bananenstecker-4mm-abschraubbar-1m-lange","title":"Banana plug cable set - 4 mm, 1 m, 4 pieces, screw-on","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eFour connection cables with 4 mm banana plugs\u003c\/li\u003e \u003cli\u003eEach plug has an insulated plastic grip\u003c\/li\u003e \u003cli\u003ePermanent connections between power supplies and loads\u003c\/li\u003e \u003cli\u003eAvailable in red, black, yellow, and blue\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis cable set consists of four connection leads with 4 mm banana plugs on both ends and insulated grip sleeves. The plugs provide reliable, quickly detachable contacts for power supplies and measuring instruments.\u003c\/p\u003e \u003cp\u003eThe insulated grip sleeves reduce the risk of electric shock when handling high voltage. The four different colors enable color-coded wiring, allowing voltages and ground conductors to be distinguished quickly and safely. The plugs are designed for insertion into standard laboratory sockets with 4 mm openings.\u003c\/p\u003e \u003cp\u003eIn everyday laboratory use, the cables are used to connect power supplies to electronic assemblies, for measuring circuits, or for setting up test circuits on breadboards. They are also used to operate simple training devices with batteries or power supplies.\u003c\/p\u003e \u003cp\u003eThe receiving side requires sockets with a 4 mm diameter. The cable length must be sufficient for the intended setup location.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis cable set is intended exclusively for building prototypes and for testing and development purposes. Caution is required when working with electrical voltages; anyone working with hazardous voltages should consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x cable - banana plug to banana plug (4 mm, screw-on) - Color: Red\u003c\/li\u003e \u003cli\u003e1x cable - banana plug to banana plug (4 mm, screw-on) - Color: Black\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045668950365,"sku":"F23107842","price":1.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kabelset-bananenstecker-auf-bananenstecker-4mm-abschraubbar-1m-laenge-funduino-2605148.png?v=1791492784"},{"product_id":"audiokabel-abgeschirmt-3mm-o-26awg-meterware","title":"Shielded audio cable - sold by the meter, Ø 3 mm, 26 AWG","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eShielded audio cable sold by the metre, 3 mm diameter\u003c\/li\u003e \u003cli\u003e26 AWG conductor cross-section (0.127 mm²) for signal transmission in the low-frequency range\u003c\/li\u003e \u003cli\u003eShielding reduces interference and hum on longer cable runs\u003c\/li\u003e \u003cli\u003eCan be cut to length as needed and fitted with connectors\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis shielded audio cable is used to connect audio signal sources to amplifiers, mixing consoles, or active speakers. The copper braid around the signal conductors diverts interference fields generated by switching power supplies, LED tubes, or radio transmitters that would otherwise be audible as hum or noise.\u003c\/p\u003e \u003cp\u003eOn longer cable runs of approximately 5 to 10 metres or more, the shielding has a noticeable effect. The 26 AWG cross-section (0.127 mm²) is typical for low-level analogue audio signals. This conductor is too thin for high-current connections such as speaker cables to power amplifiers.\u003c\/p\u003e \u003cp\u003eThe cable is suitable for studio and event technology as well as hobby audio applications, connections from audio interfaces to monitors, from synthesizers to mixing consoles, or from phono preamplifiers to active speakers. Shielded cable is also used in measurement technology, where low-interference signal routing is essential.\u003c\/p\u003e \u003cp\u003eThe cable sold by the metre is cut to length as needed. For connections on both ends, plugs, sockets, or cable lugs must be purchased separately and soldered on. A soldering iron and basic soldering skills are required.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis cable is intended exclusively for transmitting low-level audio signals. It must not be used for connection to mains voltage or in high-current circuits. Work on or near electrical installations must be carried out by qualified electricians; if in doubt, consult a qualified electrician before installation.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x audio cable, 1 m length, 3 mm Ø, 26 AWG, dual-channel\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66045669704029,"sku":"F23107704","price":1.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/audiokabel-abgeschirmt-3mm-oe-26awg-meterware-funduino-8354668.jpg?v=1791491126"}],"url":"https:\/\/funduino.com\/en\/collections\/extension-cable.oembed","provider":"Funduino","version":"1.0","type":"link"}